Data base restore
Hi
I had a problem while registering the addaon
i hav created it any run it successfully.
but when i change the company i need to re create tables , object in that company also..
ane one more is it is asking to place my .srf files in programfiles\sap\sapbone\Addons\
is there ny solution for this.. any process such that not to create tables when enter into new company any not placing .srf in addons folder..
Thank you
Hi,
i hope i understood you
1. make the table creating part of your addon - when the addon starts you create the tables and write somewhere else (tempfile, temptable) that you initialized that company
2. place the xml files in your setup.exe -> than your files are moved to the addon directory when you install the addon
lg David
Similar Messages
-
J2ee process not started sfter data base restore
hi ,i installed a test system.it is abap+java stack.i have restored full data base from production.SID's are different.abap satack is working fine,but j2ee process are not thetr in mmc showing no information is available. any one help me out.
hi am sedin
dev_disp trc file
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid CRT
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 75
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 3572
Thu Mar 13 20:32:42 2008
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3572) [dpxxdisp.c 1237]
shared lib "dw_xml.dll" version 75 successfully loaded
shared lib "dw_xtc.dll" version 75 successfully loaded
shared lib "dw_stl.dll" version 75 successfully loaded
shared lib "dw_gui.dll" version 75 successfully loaded
shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Thu Mar 13 20:32:47 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >crmtest_CRT_00 <
DpShMCreate: sizeof(wp_adm) 18512 (1424)
DpShMCreate: sizeof(tm_adm) 5258160 (26160)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1744)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000CFD0050, size: 5947376)
DpShMCreate: allocated sys_adm at 000000000CFD0050
DpShMCreate: allocated wp_adm at 000000000CFD1F00
DpShMCreate: allocated tm_adm_list at 000000000CFD6750
DpShMCreate: allocated tm_adm at 000000000CFD67B0
DpShMCreate: allocated wp_ca_adm at 000000000D4DA360
DpShMCreate: allocated appc_ca_adm at 000000000D4E0120
DpShMCreate: allocated comm_adm at 000000000D4E2060
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000D568CF0
DpShMCreate: allocated gw_adm at 000000000D568D70
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000D568DA0
DpShMCreate: allocated wall_adm at 000000000D568DB0
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 1312
argv[0] = F:\usr\sap\CRT\DVEBMGS00\exe\jcontrol.EXE
argv[1] = F:\usr\sap\CRT\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=F:\usr\sap\CRT\SYS\profile\CRT_DVEBMGS00_crmtest
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1199
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=CRT
argv[7] = -DSAPMYNAME=crmtest_CRT_00
argv[8] = -DSAPPROFILE=F:\usr\sap\CRT\SYS\profile\CRT_DVEBMGS00_crmtest
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1623]
***LOG Q0K=> DpMsAttach, mscon ( crmtest) [dpxxdisp.c 11586]
Thu Mar 13 20:32:48 2008
DpStartStopMsg: send start message (myname is >crmtest_CRT_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 75
Release check o.K.
Thu Mar 13 20:33:01 2008
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Thu Mar 13 20:33:04 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 424
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:1205) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=1312)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Mar 13 20:33:28 2008
J2EE server info
start = TRUE
state = STARTED
pid = 5112
argv[0] = F:\usr\sap\CRT\DVEBMGS00\exe\jcontrol.EXE
argv[1] = F:\usr\sap\CRT\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=F:\usr\sap\CRT\SYS\profile\CRT_DVEBMGS00_crmtest
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1275
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=CRT
argv[7] = -DSAPMYNAME=crmtest_CRT_00
argv[8] = -DSAPPROFILE=F:\usr\sap\CRT\SYS\profile\CRT_DVEBMGS00_crmtest
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Thu Mar 13 20:33:36 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
ERROR => NiIRead: SiRecv failed for hdl 6 / sock 368
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:1276) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=5112)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Mar 13 20:33:48 2008
J2EE server info
start = TRUE
state = STARTED
pid = 3456
argv[0] = F:\usr\sap\CRT\DVEBMGS00\exe\jcontrol.EXE
argv[1] = F:\usr\sap\CRT\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=F:\usr\sap\CRT\SYS\profile\CRT_DVEBMGS00_crmtest
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1294
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=CRT
argv[7] = -DSAPMYNAME=crmtest_CRT_00
argv[8] = -DSAPPROFILE=F:\usr\sap\CRT\SYS\profile\CRT_DVEBMGS00_crmtest
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Thu Mar 13 20:33:56 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 364
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:1295) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3456)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Mar 13 20:34:08 2008
J2EE server info
start = TRUE
state = STARTED
pid = 4564
argv[0] = F:\usr\sap\CRT\DVEBMGS00\exe\jcontrol.EXE
argv[1] = F:\usr\sap\CRT\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=F:\usr\sap\CRT\SYS\profile\CRT_DVEBMGS00_crmtest
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1310
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=CRT
argv[7] = -DSAPMYNAME=crmtest_CRT_00
argv[8] = -DSAPPROFILE=F:\usr\sap\CRT\SYS\profile\CRT_DVEBMGS00_crmtest
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Thu Mar 13 20:34:16 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
ERROR => NiIRead: SiRecv failed for hdl 6 / sock 356
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:1311) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=4564)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Mar 13 20:34:28 2008
J2EE server info
start = TRUE
state = STARTED
pid = 3604
argv[0] = F:\usr\sap\CRT\DVEBMGS00\exe\jcontrol.EXE
argv[1] = F:\usr\sap\CRT\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=F:\usr\sap\CRT\SYS\profile\CRT_DVEBMGS00_crmtest
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1321
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=CRT
argv[7] = -DSAPMYNAME=crmtest_CRT_00
argv[8] = -DSAPPROFILE=F:\usr\sap\CRT\SYS\profile\CRT_DVEBMGS00_crmtest
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Thu Mar 13 20:34:36 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 352
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:1322) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3604)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Mar 13 20:34:48 2008
J2EE server info
start = TRUE
state = STARTED
pid = 4452
argv[0] = F:\usr\sap\CRT\DVEBMGS00\exe\jcontrol.EXE
argv[1] = F:\usr\sap\CRT\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=F:\usr\sap\CRT\SYS\profile\CRT_DVEBMGS00_crmtest
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1336
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=CRT
argv[7] = -DSAPMYNAME=crmtest_CRT_00
argv[8] = -DSAPPROFILE=F:\usr\sap\CRT\SYS\profile\CRT_DVEBMGS00_crmtest
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Thu Mar 13 20:34:56 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
ERROR => NiIRead: SiRecv failed for hdl 6 / sock 348
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:1337) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=4452)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Mar 13 20:35:08 2008
J2EE server info
start = TRUE
state = STARTED
pid = 3476
argv[0] = F:\usr\sap\CRT\DVEBMGS00\exe\jcontrol.EXE
argv[1] = F:\usr\sap\CRT\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=F:\usr\sap\CRT\SYS\profile\CRT_DVEBMGS00_crmtest
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1368
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=CRT
argv[7] = -DSAPMYNAME=crmtest_CRT_00
argv[8] = -DSAPPROFILE=F:\usr\sap\CRT\SYS\profile\CRT_DVEBMGS00_crmtest
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Thu Mar 13 20:35:16 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 344
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:1370) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3476)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Mar 13 20:35:28 2008
J2EE server info
start = TRUE
state = STARTED
pid = 5104
argv[0] = F:\usr\sap\CRT\DVEBMGS00\exe\jcontrol.EXE
argv[1] = F:\usr\sap\CRT\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=F:\usr\sap\CRT\SYS\profile\CRT_DVEBMGS00_crmtest
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1381
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=CRT
argv[7] = -DSAPMYNAME=crmtest_CRT_00
argv[8] = -DSAPPROFILE=F:\usr\sap\CRT\SYS\profile\CRT_DVEBMGS00_crmtest
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Thu Mar 13 20:35:36 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
ERROR => NiIRead: SiRecv failed for hdl 6 / sock 340
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:1382) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=5104)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Mar 13 20:35:48 2008
J2EE server info
start = TRUE
state = STARTED
pid = 3304
argv[0] = F:\usr\sap\CRT\DVEBMGS00\exe\jcontrol.EXE
argv[1] = F:\usr\sap\CRT\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=F:\usr\sap\CRT\SYS\profile\CRT_DVEBMGS00_crmtest
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1396
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=CRT
argv[7] = -DSAPMYNAME=crmtest_CRT_00
argv[8] = -DSAPPROFILE=F:\usr\sap\CRT\SYS\profile\CRT_DVEBMGS00_crmtest
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Thu Mar 13 20:35:56 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
ERROR => NiIRead: SiRecv failed for hdl 7 / sock 324
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:1397) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3304)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Mar 13 20:36:08 2008
J2EE server info
start = TRUE
state = STARTED
pid = 4864
argv[0] = F:\usr\sap\CRT\DVEBMGS00\exe\jcontrol.EXE
argv[1] = F:\usr\sap\CRT\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=F:\usr\sap\CRT\SYS\profile\CRT_DVEBMGS00_crmtest
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1412
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=CRT
argv[7] = -DSAPMYNAME=crmtest_CRT_00
argv[8] = -DSAPPROFILE=F:\usr\sap\CRT\SYS\profile\CRT_DVEBMGS00_crmtest
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Thu Mar 13 20:36:16 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 320
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:1413) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=4864)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Mar 13 20:36:28 2008
DpEnvCheckJ2ee: switch off j2ee start flag
Sat Mar 15 04:50:32 2008
WARNING => Program on wp 9 (stat=0x2) no longer exists - answer discarded [dpxxdisp.c 3787]
Sat Mar 15 04:50:42 2008
WARNING => Program on wp 9 (stat=0x2) no longer exists - answer discarded [dpxxdisp.c 3787]
Sat Mar 15 04:50:52 2008
WARNING => Program on wp 9 (stat=0x4) no longer exists - answer discarded [dpxxdisp.c 3787]
Sat Mar 15 04:51:47 2008
WARNING => Program on wp 9 (stat=0x2) no longer exists - answer discarded [dpxxdisp.c 3787]
Sat Mar 15 04:52:03 2008
WARNING => Program on wp 9 (stat=0x4) no longer exists - answer discarded [dpxxdisp.c 3787]
Sat Mar 15 04:52:12 2008
WARNING => Program on wp 9 (stat=0x2) no longer exists - answer discarded [dpxxdisp.c 3787]
Sat Mar 15 04:52:19 2008
WARNING => Program on wp 9 (stat=0x2) no longer exists - answer discarded [dpxxdisp.c 3787]
Sat Mar 15 04:53:02 2008
WARNING => Program on wp 9 (stat=0x2) no longer exists - answer discarded [dpxxdisp.c 3787]
Sat Mar 15 04:53:31 2008
WARNING => Program on wp 9 (stat=0x4) no longer exists - answer discarded [dpxxdisp.c 3787]
Sat Mar 15 04:55:01 2008
WARNING => Program on wp 8 (stat=0x4) no longer exists - answer discarded [dpxxdisp.c 3787]
Sat Mar 15 04:55:07 2008
WARNING => Program on wp 8 (stat=0x2) no longer exists - answer discarded [dpxxdisp.c 3787]
Sat Mar 15 04:55:18 2008
WARNING => Program on wp 9 (stat=0x4) no longer exists - answer discarded [dpxxdisp.c 3787]
Sat Mar 15 16:50:04 2008
WARNING => Program on wp 9 (stat=0x4) no longer exists - answer discarded [dpxxdisp.c 3787]
Sat Mar 15 16:50:11 2008
WARNING => Program on wp 9 (stat=0x4) no longer exists - answer discarded [dpxxdisp.c 3787]
Sat Mar 15 16:50:20 2008
WARNING => Program on wp 9 (stat=0x4) no longer exists - answer discarded [dpxxdisp.c 3787]
Sat Mar 15 16:50:26 2008
WARNING => Program on wp 9 (stat=0x4) no longer exists - answer discarded [dpxxdisp.c 3787]
Sat Mar 15 16:51:08 2008
WARNING => Program on wp 9 (stat=0x2) no longer exists - answer discarded [dpxxdisp.c 3787]
Sat Mar 15 16:51:27 2008
WARNING => Program on wp 9 (stat=0x4) no longer exists - answer discarded [dpxxdisp.c 3787]
Sat Mar 15 16:51:42 2008
WARNING => Program on wp 9 (stat=0x2) no longer exists - answer discarded [dpxxdisp.c 3787]
Sat Mar 15 16:52:23 2008
WARNING => Program on wp 9 (stat=0x4) no longer exists - answer discarded [dpxxdisp.c 3787]
Sat Mar 15 16:52:50 2008
WARNING => Program on wp 9 (stat=0x2) no longer exists - answer discarded [dpxxdisp.c 3787]
Sat Mar 15 16:54:16 2008
WARNING => Program on wp 8 (stat=0x4) no longer exists - answer discarded [dpxxdisp.c 3787]
Sat Mar 15 17:00:01 2008
WARNING => Program on wp 9 (stat=0x2) no longer exists - answer discarded [dpxxdisp.c 3787]
Sun Mar 16 04:49:26 2008
WARNING => Program on wp 9 (stat=0x4) no longer exists - answer discarded [dpxxdisp.c 3787]
Sun Mar 16 04:49:34 2008
WARNING => Program on wp 9 (stat=0x4) no longer exists - answer discarded [dpxxdisp.c 3787]
Sun Mar 16 04:49:43 2008
WARNING => Program on wp 9 (stat=0x4) no longer exists - answer discarded [dpxxdisp.c 3787]
Sun Mar 16 04:50:38 2008
WARNING => Program on wp 9 (stat=0x4) no longer exists - answer discarded [dpxxdisp.c 3787]
Sun Mar 16 04:50:54 2008
WARNING => Program on wp 9 (stat=0x2) no longer exists - answer discarded [dpxxdisp.c 3787]
Sun Mar 16 04:51:05 2008
WARNING => Program on wp 9 (stat=0x4) no longer exists - answer discarded [dpxxdisp.c 3787]
Sun Mar 16 04:51:12 2008
WARNING => Program on wp 9 (stat=0x2) no longer exists - answer discarded [dpxxdisp.c 3787]
Sun Mar 16 04:52:19 2008
WARNING => Program on wp 9 (stat=0x2) no longer exists - answer discarded [dpxxdisp.c 3787]
Sun Mar 16 04:54:08 2008
WARNING => Program on wp 9 (stat=0x4) no longer exists - answer discarded [dpxxdisp.c 3787]
Sun Mar 16 04:59:50 2008
WARNING => Program on wp 9 (stat=0x4) no longer exists - answer discarded [dpxxdisp.c 3787]
Sun Mar 16 16:49:22 2008
WARNING => Program on wp 9 (stat=0x4) no longer exists - answer discarded [dpxxdisp.c 3787]
Sun Mar 16 16:49:30 2008
WARNING => Program on wp 9 (stat=0x4) no longer exists - answer discarded [dpxxdisp.c 3787]
Sun Mar 16 16:49:38 2008
WARNING => Program on wp 9 (stat=0x4) no longer exists - answer discarded [dpxxdisp.c 3787]
Sun Mar 16 16:50:42 2008
WARNING => Program on wp 9 (stat=0x4) no longer exists - answer discarded [dpxxdisp.c 3787]
Sun Mar 16 16:50:54 2008
WARNING => Program on wp 9 (stat=0x4) no longer exists - answer discarded [dpxxdisp.c 3787]
Sun Mar 16 16:52:02 2008
WARNING => Program on wp 9 (stat=0x4) no longer exists - answer discarded [dpxxdisp.c 3787]
Sun Mar 16 16:53:30 2008
WARNING => Program on wp 8 (stat=0x2) no longer exists - answer discarded [dpxxdisp.c 3787]
Sun Mar 16 16:53:39 2008
WARNING => Program on wp 9 (stat=0x4) no longer exists - answer discarded [dpxxdisp.c 3787]
Mon Mar 17 04:49:42 2008
WARNING => Program on wp 9 (stat=0x2) no longer exists - answer discarded [dpxxdisp.c 3787]
Mon Mar 17 04:49:51 2008
WARNING => Program on wp 9 (stat=0x4) no longer exists - answer discarded [dpxxdisp.c 3787]
Mon Mar 17 04:50:00 2008
WARNING => Program on wp 9 (stat=0x2) no longer exists - answer discarded [dpxxdisp.c 3787]
Mon Mar 17 04:50:06 2008
WARNING => Program on wp 9 (stat=0x2) no longer exists - answer discarded [dpxxdisp.c 3787]
Mon Mar 17 04:50:55 2008
WARNING => Program on wp 9 (stat=0x4) no longer exists - answer discarded [dpxxdisp.c 3787]
Mon Mar 17 04:51:11 2008
WARNING => Program on wp 9 (stat=0x4) no longer exists - answer discarded [dpxxdisp.c 3787]
Mon Mar 17 04:51:20 2008
WARNING => Program on wp 9 (stat=0x4) no longer exists - answer discarded [dpxxdisp.c 3787]
Mon Mar 17 04:51:28 2008
WARNING => Program on wp 9 (stat=0x4) no longer exists - answer discarded [dpxxdisp.c 3787]
Mon Mar 17 04:52:10 2008
WARNING => Program on wp 9 (stat=0x4) no longer exists - answer discarded [dpxxdisp.c 3787]
Mon Mar 17 04:52:37 2008
WARNING => Program on wp 9 (stat=0x4) no longer exists - answer discarded [dpxxdisp.c 3787]
Mon Mar 17 04:54:03 2008
WARNING => Program on wp 8 (stat=0x2) no longer exists - answer discarded [dpxxdisp.c 3787]
Mon Mar 17 04:54:13 2008
WARNING => Program on wp 9 (stat=0x2) no longer exists - answer discarded [dpxxdisp.c 3787]
Mon Mar 17 04:54:21 2008
WARNING => Program on wp 9 (stat=0x4) no longer exists - answer discarded [dpxxdisp.c 3787]
Mon Mar 17 05:00:20 2008
WARNING => Program on wp 9 (stat=0x2) no longer exists - answer discarded [dpxxdisp.c 3787]
and dev_wo is
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Thu Mar 13 20:32:48 2008
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\CRT\DVEBMGS00\exe\dbmssslib.dll' ...
B Library 'F:\usr\sap\CRT\DVEBMGS00\exe\dbmssslib.dll' loaded
B Version of 'F:\usr\sap\CRT\DVEBMGS00\exe\dbmssslib.dll' is "700.08", patchlevel (0.72)
B New connection 0 created
M sysno 00
M sid CRT
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 75
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 3920
M
M kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3920) [dpxxdisp.c 1299]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 18512 (1424)
M DpShMCreate: sizeof(tm_adm) 5258160 (26160)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1744)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000EFD0050, size: 5947376)
M DpShMCreate: allocated sys_adm at 000000000EFD0050
M DpShMCreate: allocated wp_adm at 000000000EFD1F00
M DpShMCreate: allocated tm_adm_list at 000000000EFD6750
M DpShMCreate: allocated tm_adm at 000000000EFD67B0
M DpShMCreate: allocated wp_ca_adm at 000000000F4DA360
M DpShMCreate: allocated appc_ca_adm at 000000000F4E0120
M DpShMCreate: allocated comm_adm at 000000000F4E2060
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000F568CF0
M DpShMCreate: allocated gw_adm at 000000000F568D70
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000F568DA0
M DpShMCreate: allocated wall_adm at 000000000F568DB0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host crmtest
M
M Thu Mar 13 20:32:49 2008
M calling db_connect ...
C Thread ID:3956
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'F:\usr\sap\CRT\DVEBMGS00\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 72
C patchcomment MSSQL: Thread check in DbSlDisconnect (969143)
C np:(local) connection used on CRMTEST
C CopyLocalParameters: dbuser is 'crt'
C
C Thu Mar 13 20:32:50 2008
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Provider Release:9.00.1399.06
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Cache sizes: header 104 bytes, 20000 names (32800000 bytes), 500 dynamic statements (2872000 bytes), total 35672104 bytes
C Using shared procedure name cache CRMTEST_CRTCRT_CRT_MEM initialized by another process.
C Connected to db server : [CRMTEST] server_used : [np:(local)], dbname: CRT, dbuser: crt
C pn_id:CRMTEST_CRTCRT_CRT
C Using MARS (on sql 9.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20080313 203249 CRMTEST
C The IRow interface is supported by this OLEDB provider
M db_connect o.k.
M
M Thu Mar 13 20:32:51 2008
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Thu Mar 13 20:32:58 2008
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0000000019460050, size: 4400000)
M SHM_ROLL_AREA (addr: 000007FFF3290050, size: 61440000)
M SHM_PAGING_AREA (addr: 00000000198A0050, size: 32768000)
M SHM_ROLL_ADM (addr: 000000001B7F0050, size: 615040)
M SHM_PAGING_ADM (addr: 000000001B890050, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 000000001B920050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 000000000FFE0050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 13, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 000000001FA70160, size: 30000000, end: 000000002170C4E0)
B dbtbxbuf: Buffer TABLP (addr: 0000000021710160, size: 10240000, end: 00000000220D4160)
B
B Thu Mar 13 20:32:59 2008
B dbexpbuf: Buffer EIBUF (addr: 00000000220E0170, size: 4194304, end: 00000000224E0170)
B dbexpbuf: Buffer ESM (addr: 00000000224F0170, size: 4194304, end: 00000000228F0170)
B dbexpbuf: Buffer CUA (addr: 0000000022900170, size: 3072000, end: 0000000022BEE170)
B dbexpbuf: Buffer OTR (addr: 0000000022BF0170, size: 4194304, end: 0000000022FF0170)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 00000000115A2D30
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 000000002C3900D0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 000000002C3904F0
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2168 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A PXA: Fragment Size too small: 36 MB, reducing # of fragments
A System page size: 4kb, total admin_size: 5720kb, dir_size: 5664kb.
A Attached to PXA (address 000007FFF6D30050, size 150000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A
A Thu Mar 13 20:33:00 2008
A ABAP ShmAdm attached (addr=000007FF6207E000 leng=20955136 end=000007FF6347A000)
A >> Shm MMADM area (addr=000007FF62557E90 leng=244096 end=000007FF62593810)
A >> Shm MMDAT area (addr=000007FF62594000 leng=15622144 end=000007FF6347A000)
A RFC Destination> destination crmtest_CRT_00 host crmtest system CRT systnr 0 (crmtest_CRT_00)
A RFC Options> H=crmtest,S=00,d=2,
B table logging switched off for all clients
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 13730 bytes at 000000002C500050
N SsfSapSecin: putenv(SECUDIR=F:\usr\sap\CRT\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is F:\usr\sap\CRT\DVEBMGS00\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:700.08]):
B max_blocking_factor = 50, max_in_blocking_factor = 255,
B min_blocking_factor = 5, min_in_blocking_factor = 10,
B prefer_union_all = 1, prefer_join = 1,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * =0x00, character encoding = STD / []:X,
B use_hints = abap->1, dbif->0x1, upto->0, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 700, [7000.0.75.20050900]
W ITS Plugin: Int.version, [32]
W ITS Plugin: Feature set: [10]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume crmtest_CRT_00
E
E Thu Mar 13 20:33:01 2008
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
C
C Thu Mar 13 20:33:15 2008
C The IRow interface is supported by this OLEDB provider
S
S Thu Mar 13 20:34:08 2008
S found spool memory service RSPO-ACTIONS at 000000002C39A230
M
M Thu Mar 13 20:36:35 2008
M *** ERROR => TempLicense request rejected [slicfkt.c 656]
M *** ERROR => SlicTryTemplicense: SlicICheckLicense failed (rc: -104) [slicch.c 2125]
M ***LOG SL3=> KLIC_HWIDKEY_LN.SLIC_HWIDKEY_LN [slicch.c 380]
M *** ERROR =>
SAPLICENSE ERROR ***, error description not available
[likeyapi_w.c 2182]
M
M Thu Mar 13 20:38:08 2008
M SecAudit(RsauShmInit): WP attached to existing shared memory.
M SecAudit(RsauShmInit): addr of SCSA........... = 0000000008E30050
M SecAudit(RsauShmInit): addr of RSAUSHM........ = 0000000008E307C0
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 0000000008E30800
M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 0000000008E3080C
M
M Thu Mar 13 20:39:30 2008
M *** ERROR => TempLicense request rejected [slicfkt.c 656]
M *** ERROR => SlicTryTemplicense: SlicICheckLicense failed (rc: -104) [slicch.c 2125]
M ***LOG SL3=> KLIC_HWIDKEY_LN.SLIC_HWIDKEY_LN [slicch.c 380]
M *** ERROR =>
SAPLICENSE ERROR ***, error description not available
[likeyapi_w.c 2182]
M
M Thu Mar 13 20:40:58 2008
M *** ERROR => TempLicense request rejected [slicfkt.c 656]
M *** ERROR => SlicTryTemplicense: SlicICheckLicense failed (rc: -104) [slicch.c 2125]
M ***LOG SL3=> KLIC_HWIDKEY_LN.SLIC_HWIDKEY_LN [slicch.c 380]
M *** ERROR =>
SAPLICENSE ERROR ***, error description not available
[likeyapi_w.c 2182]
B dbmyclu : info : my major identification is 168427960, minor one 0.
B dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
B dbmyclu : info : my initial uuid is 21ED0D86BD75A54AB110DF41F509CAAB.
B dbmyclu : info : current optimistic cluster level: 3
B dbmyclu : info : pessimistic reads set to 2.
M
M Thu Mar 13 21:07:39 2008
M *** ERROR => TempLicense request rejected [slicfkt.c 656]
M *** ERROR => SlicTryTemplicense: SlicICheckLicense failed (rc: -104) [slicch.c 2125]
M ***LOG SL3=> KLIC_HWIDKEY_LN.SLIC_HWIDKEY_LN [slicch.c 380]
M *** ERROR =>
SAPLICENSE ERROR ***, error description not available
[likeyapi_w.c 2182]
M
M Thu Mar 13 21:08:04 2008
M *** ERROR => TempLicense request rejected [slicfkt.c 656]
M *** ERROR => SlicTryTemplicense: SlicICheckLicense failed (rc: -104) [slicch.c 2125]
M ***LOG SL3=> KLIC_HWIDKEY_LN.SLIC_HWIDKEY_LN [slicch.c 380]
M *** ERROR =>
SAPLICENSE ERROR ***, error description not available
[likeyapi_w.c 2182]
M
M Thu Mar 13 21:08:23 2008
M *** ERROR => TempLicense request rejected [slicfkt.c 656]
M *** ERROR => SlicTryTemplicense: SlicICheckLicense failed (rc: -104) [slicch.c 2125]
M ***LOG SL3=> KLIC_HWIDKEY_LN.SLIC_HWIDKEY_LN [slicch.c 380]
M *** ERROR =>
SAPLICENSE ERROR ***, error description not available
[likeyapi_w.c 2182]
M
M Thu Mar 13 21:08:45 2008
M *** ERROR => TempLicense request rejected [slicfkt.c 656]
M *** ERROR => SlicTryTemplicense: SlicICheckLicense failed (rc: -104) [slicch.c 2125]
M ***LOG SL3=> KLIC_HWIDKEY_LN.SLIC_HWIDKEY_LN [slicch.c 380]
M *** ERROR =>
SAPLICENSE ERROR ***, error description not available
[likeyapi_w.c 2182]
M
M Thu Mar 13 21:09:37 2008
M *** ERROR => TempLicense request rejected [slicfkt.c 656]
M *** ERROR => SlicTryTemplicense: SlicICheckLicense failed (rc: -104) [slicch.c 2125]
M ***LOG SL3=> KLIC_HWIDKEY_LN.SLIC_HWIDKEY_LN [slicch.c 380]
M *** ERROR =>
SAPLICENSE ERROR ***, error description not available
[likeyapi_w.c 2182]
M
M Thu Mar 13 21:09:59 2008
M *** ERROR => TempLicense request rejected [slicfkt.c 656]
M *** ERROR => SlicTryTemplicense: SlicICheckLicense failed (rc: -104) [slicch.c 2125]
M ***LOG SL3=> KLIC_HWIDKEY_LN.SLIC_HWIDKEY_LN [slicch.c 380]
M *** ERROR =>
SAPLICENSE ERROR ***, error description not available
[likeyapi_w.c 2182]
M
M Thu Mar 13 21:10:16 2008
M *** ERROR => TempLicense request rejected [slicfkt.c 656]
M *** ERROR => SlicTryTemplicense: SlicICheckLicense failed (rc: -104) [slicch.c 2125]
M ***LOG SL3=> KLIC_HWIDKEY_LN.SLIC_HWIDKEY_LN [slicch.c 380]
M *** ERROR =>
SAPLICENSE ERROR ***, error description not available
[likeyapi_w.c 2182]
M
M Thu Mar 13 21:10:40 2008
M *** ERROR => TempLicense request rejected [slicfkt.c 656]
M *** ERROR => SlicTryTemplicense: SlicICheckLicense failed (rc: -104) [slicch.c 2125]
M ***LOG SL3=> KLIC_HWIDKEY_LN.SLIC_HWIDKEY_LN [slicch.c 380]
M *** ERROR =>
SAPLICENSE ERROR ***, error description not available
[likeyapi_w.c 2182]
M
M Thu Mar 13 21:12:33 2008
M *** ERROR => TempLicense request rejected [slicfkt.c 656]
M *** ERROR => SlicTryTemplicense: SlicICheckLicense failed (rc: -104) [slicch.c 2125]
M ***LOG SL3=> KLIC_HWIDKEY_LN.SLIC_HWIDKEY_LN [slicch.c 380]
M *** ERROR =>
SAPLICENSE ERROR ***, error description not available
[likeyapi_w.c 2182]
M
M Thu Mar 13 21:12:56 2008
M *** ERROR => TempLicense request rejected [slicfkt.c 656]
M *** ERROR => SlicTryTemplicense: SlicICheckLicense failed (rc: -104) [slicch.c 2125]
M ***LOG SL3=> KLIC_HWIDKEY_LN.SLIC_HWIDKEY_LN [slicch.c 380]
M *** ERROR =>
SAPLICENSE ERROR ***, error description not available
[likeyapi_w.c 2182]
M
M Thu Mar 13 21:14:15 2008
M *** ERROR => TempLicense request rejected [slicfkt.c 656]
M *** ERROR => SlicTryTemplicense: SlicICheckLicense failed (rc: -104) [slicch.c 2125]
M ***LOG SL3=> KLIC_HWIDKEY_LN.SLIC_HWIDKEY_LN [slicch.c 380]
M *** ERROR =>
SAPLICENSE ERROR ***, error description not available
[likeyapi_w.c 2182]
N
N Thu Mar 13 21:14:56 2008
N RSEC: The entry with identifier /RFC/[email protected]_CRD
N was encrypted by a system
N with different SID and cannot be decrypted here.
N RSEC: The entry with identifier /RFC/[email protected]_CRD
N was encrypted by a system
N with different SID and cannot be decrypted here.
A
A Thu Mar 13 21:14:57 2008
A RFC 3165 CONVID 24150480
A * CMRC=18 DATA=3 STATUS=1 SAPRC=0 comread Logon not possible (error in license check)
A RFC> ABAP Programm: SAPLTMSC (Transaction: STMS)
A RFC> User: SAP* (Client: 000)
A RFC> Destination: [email protected]_CRT (handle: 2, 24150480, {BBF7B2FD-E7BD-481C-BCC5-C14C4DCF7569})
A RFC> Called function module: TMS_CI_START_SERVICE
A RFC 3165 CONVID 24151558
A * CMRC=18 DATA=3 STATUS=1 SAPRC=0 comread Logon not possible (error in license check)
A RFC> ABAP Programm: SAPLTMSC (Transaction: STMS)
A RFC> User: SAP* (Client: 000)
A RFC> Destination: [email protected]_CRT (handle: 3, 24151558, {BE818A28-28FF-4FA3-8468-7D26BAE3E45C})
A RFC> Called function module: TMS_CI_START_SERVICE
M
M *****************************************************************************
M *
M * LOCATION SAP-Gateway on host crmtest / sapgw00
M * ERROR program state check for conversation 24152667
M *
M * TIME Thu Mar 13 21:14:57 2008
M * RELEASE 700
M * COMPONENT SAP-Gateway
M * VERSION 2
M * RC 471
M * MODULE gwr3cpic.c
M * LINE 3251
M * DETAIL program sapgw00 on host crmtest called function SEND_DATA in
M * state RECEIVE_DO_ACCEPT
M * COUNTER 79
M *
M *****************************************************************************
M
A RFC 3293 CONVID 24152667
A * CMRC=25 DATA=1 STATUS=1 SAPRC=221 ThSAPCMRCV
A RFC> ABAP Programm: SAPLTMSC (Transaction: STMS)
A RFC> User: SAP* (Client: 000)
A RFC> Destination: [email protected]_CRT (handle: 5, 24152667, {AF649C7D-630C-4119-8883-D1B05D5C7B04})
A RFC> Called function module: TMS_CI_START_SERVICE
A RFC 3165 CONVID 24152667
A * CMRC=25 DATA=1 STATUS=1 SAPRC=221 comread
A
A Thu Mar 13 21:15:00 2008
A RFC 3165 CONVID 24156636
A * CMRC=18 DATA=3 STATUS=1 SAPRC=0 comread Logon not possible (error in license check)
A RFC> ABAP Programm: SAPLTMSC (Transaction: STMS)
A RFC> User: SAP* (Client: 000)
A RFC> Destination: [email protected]_CRT (handle: 7, 24156636, {6B579F5B-BE77-497B-8F00-10A4EA3E56CA})
A RFC> Called function module: TMS_CI_START_SERVICE
A
A Thu Mar 13 21:16:19 2008
A RFC 3165 CONVID 24236495
A * CMRC=18 DATA=3 STATUS=1 SAPRC=0 comread Logon not possible (error in license check)
A RFC> ABAP Programm: SAPLTMSC (Transaction: STMS)
A RFC> User: SAP* (Client: 000)
A RFC> Destination: [email protected]_CRT (handle: 2, 24236495, {4060AC1F-CDBC-4F8F-A688-E0EC4349A4AD})
A RFC> Called function module: TMS_CI_START_SERVICE
A RFC 3165 CONVID 24237526
A * CMRC=18 DATA=3 STATUS=1 SAPRC=0 comread Logon not possible (error in license check)
A RFC> ABAP Programm: SAPLTMSC (Transaction: STMS)
A RFC> User: SAP* (Client: 000)
A RFC> Destination: [email protected]_CRT (handle: 3, 24237526, {2194687C-6032-433B-A830-3B14BBB6F08E})
A RFC> Called function module: TMS_CI_START_SERVICE
M
M *****************************************************************************
M *
M * LOCATION SAP-Gateway on host crmtest / sapgw00
M * ERROR program state check for conversation 24238573
M *
M * TIME Thu Mar 13 21:16:19 2008
M * RELEASE 700
M * COMPONENT SAP-Gateway
M * VERSION 2
M * RC 471
M * MODULE gwr3cpic.c
M * LINE 3251
M * DETAIL program sapgw00 on host crmtest called function SEND_DATA in
M * state RECEIVE_DO_ACCEPT
M * COUNTER 82
M *
M *****************************************************************************
M
A RFC 3293 CONVID 24238573
A * CMRC=25 DATA=1 STATUS=1 SAPRC=221 ThSAPCMRCV
A RFC> ABAP Programm: SAPLTMSC (Transaction: STMS)
A RFC> User: SAP* (Client: 000)
A RFC> Destination: [email protected]_CRT (handle: 5, 24238573, {7070FE84-C4F8-4B93-9A35-CC8B33004994})
A RFC> Called function module: TMS_CI_START_SERVICE
A RFC 3165 CONVID 24238573
A * CMRC=25 DATA=1 STATUS=1 SAPRC=221 comread
A
A Thu Mar 13 21:16:21 2008
A RFC 3165 CONVID 24241636
A * CMRC=18 DATA=3 STATUS=1 SAPRC=0 comread Logon not possible (error in license check)
A RFC> ABAP Programm: SAPLTMSC (Transaction: STMS)
A RFC> User: SAP* (Client: 000)
A RFC> Destination: [email protected]_CRT (handle: 7, 24241636, {BAE47DEC-B5E0-436B-AF61-49BA0BECBA89})
A RFC> Called function module: TMS_CI_START_SERVICE
A
A Thu Mar 13 21:16:51 2008
A RFC 3165 CONVID 24272417
A * CMRC=18 DATA=3 STATUS=1 SAPRC=0 comread Logon not possible (error in license check)
A RFC> ABAP Programm: SAPLTMSC (Transaction: STMS)
A RFC> User: SAP* (Client: 000)
A RFC> Destination: [email protected]_CRT (handle: 9, 24272417, {4A78FF2B-82BD-4199-845F-ED81CBD5CFE9})
A RFC> Called function module: TMS_CI_START_SERVICE
A RFC 3165 CONVID 24273433
A * CMRC=18 DATA=3 STATUS=1 SAPRC=0 comread Logon not possible (error in license check)
A RFC> ABAP Programm: SAPLTMSC (Transaction: STMS)
A RFC> User: SAP* (Client: 000)
A RFC> Destination: [email protected]_CRT (handle: 10, 24273433, {6B3B7501-5319-4275-BCF3-64CE72C5D911})
A RFC> Called function module: TMS_CI_START_SERVICE
M
M *****************************************************************************
M *
M * LOCATION SAP-Gateway on host crmtest / sapgw00
M * ERROR program state check for conversation 24274480
M *
M * TIME Thu Mar 13 21:16:51 2008
M * RELEASE 700
M * COMPONENT SAP-Gateway
M * VERSION 2
M * RC 471
M * MODULE gwr3cpic.c
M * LINE 3251
M * DETAIL program sapgw00 on host crmtest called function SEND_DATA in
M * -
Char '¦' gets replaced with '|' in sp source when restoring a data base.
char '¦' gets replaced with '|' in sp source when restoring a data base. This makes the procedure put a character for separating a string different (|) from the espected one (¦). And this makes the application failed.
Can anyone help me out?
Thanks,
FrankI'll follow the thread in Data Base - General from now on.
In case u see this one first:
To ALL:
Thanks 355099, Joel, and Justin:
Oracle9i Enterprise Edition Release 9.2.0.4.0
Charset: ?? I'll will ask the data base guy. (we are preaty small). It is reported as a bug in my system, the thing is I usually do not program against this kind of bug. :)
Anyways, the usage is as follows, this guy uses an empty restore to install the database for application installation purposes.
instaed of running some scripts the test for the instalation is done as a restore.
import/export is the action being done here.
Again I use the ¦ char to separate a string array.
Something to consider is that the chars are:
124 | and 166 ¦
They are both ascii aren't they?
Why would the impor/export change the char ¦ for |?
if is a charset problem why isn't the changed char a ? or a # or a 9 or a non printable char, instead it changes for a |.
x_x
Frank -
Data base in microsoft office is damaged andI can't rebuild it. suggestions?
Hi
The data base for Microsoft Office 2008 has been damaged. I've tried twice to rebuild the data base, but it stalls after 2 hours and I'm forced to cancel. Very frustrating. The Office tools is a nice tool, but it's not working. I can use Word, Excel and PP but Entourage will not open at all. I've removed office and reinstalled and downloaded all of the updates. I still get the same message. If I have to start over, so be it, but I'm not sure how to completely remove Office. I removed it using Microsoft tools. (Positive reinforcement that I will always use Macs!) Any suggestions will be most appreciated.
Thanks,
Momo3use time machine (if you have it on before all the errors in office) to restore the working files. if not you can use cleanmymac to remove all microsoft office program files and then reinstall office. Back up all your data before useing cleanmymac. it is a good app but it can clean too much some times if you do use clean my mac, open clean my mac click applications tab drag office apps from finder>applications not the dock and microsoft update as well. then click remove. it will remove all files that go with office (It wont remove Your document files) her is a link to a free trial of clean my mac http://macpaw.com/cleanmymac
-
Error opening data base for the library for Aperture
Hello,
I have been using Aperture all day and for some reason am now getting this error message when trying to open it again.
Te was an error opening the data base for the library "users/*******/pictures/aperture3triallibrary.aplibrary
Has this happened for anyone else?
Many ThanksWhen I hold down ⌘⌥ firmly, at the same time, and with these keys held down double click the Aperture library that I want to repair, I get this panel:
Then, when I select "Repair" Aperture will show a progress bar and the Dock icon will stay highlighted.
When it is finished, the Aperture window will open.
When I select repair, it seems as though it doesn't run. I don't get a dialog box to confirm it's happening and on the dock the little light under the Aperture icon isn't lit, which seems it is'nt open or running.
After you select "Repair", does the panel close and then nothing? Or does the panel not react?
I still don't see fully, what is going on on your mac.
But it is a good sign, that you can create a new library. That suggests, that Aperture is running correctly on your mac, and "only" your old library has a problem. Try to test the new library - import a few images and try to adjust them.
Once you are convinced, that the new library is working well, you have three options.
Try "Rebuild" instead of "Repair".
Or try to import your old library into the new library (Aperture's main menu bar > File >Import > Library) - that is another approach to rebuilsd the library.
Or restore from backup. To restore from Time Machine, open a Finder Window showing your Aperture library, and then enter Time Machine. Go back in time to the most recent date that has a working Aperture library and select "Restore". If you have enough space on your disk, restore to a different folder and don't overwrite your current library.
Regards
Léonie -
Upgrade data base from sql server 2005 to sql server2008
Hi guys,
What is the best way for upgrade my SQL Server 2005 data base to SQL 2008?It depends on how you want migrate, in-place or side-by-side?
In-place: Run a backup of all databases and then install the new SQL Server version
Side-by-side: Install the new SQL Server, backup all database of old SQL Server and restore them on the new one. Then copy all logins from old to new server.
Olaf Helper
[ Blog] [ Xing] [ MVP] -
Data base was broken now its fixed
When I installed 2.0 I upgraded my broken data Base because I never thought I would find the broken part anyway. Well "knock on wood" after playing with it for a little while I restarted aperture to rebuild the data base expecting to find errors all over the place. None!
I know Apple worked on the data base but I didnt expect this. I have run Cocktail in between the rebuilds but I'm pretty sure that would not of done it. Apple did it right ... at least by me.
Hope others work out too
DavidIf you restore to an older backup, you will get the content that is in the backup. Everything on the iPhone will be erased and you will be brought back to the time that backup was made. See this document prepared by another user about syncing to a new computer https://discussions.apple.com/docs/DOC-3141
-
Hi ,
we are having TFS 2013 version ..we need to migrate only TFS database server to new server. Please let me know the steps for doing this ..need to restore databases from existing server to new server and Need to point TFS application to Point to New Data
Base Server (we don't use Share Point) where to chance the connection string to point to new server..
Regards,
Naveen MHi Chamindac,
Followed Steps in below link and all commands got executed successfully, but when trying to open TFS from IE it's showing 403.14 forbeddien error..when accessing from Visual studio showing 500 internal error.
It's showing everything correctly in Team foundation server administration console like application tier ,data tier summary showing updated New DB Server name etc...
http://blogs.msdn.com/b/tfssetup/archive/2014/05/15/migrating-team-foundation-server-databases.aspx
Can you please help me on this why it's not working while accessing from IE and Visual studio..what are the areas i need to look. Please help this is most urgent for us
Regards,
Naveen M -
How to switch from one Data base to another data base
Hi,
How to switch from one Data base to another data base if first data base server like in restoring,blocking,network disconnected state.
Please help out for the same.
Regards,
AnilkumarSounds like a problem for forums/support from the DB provider, as this problem is normally solved through some form of HA provided by the DB (or some cluster software, but still not Java) with, normally, a shared (virtual) IP address.
-
Hello Experts,
I am going to be assigned to a project which involves upgrading the current version (3.1) to 4.1 or 4.2 for a CallManager. The data base is corruped. We can't either read or wirte into the DB. My question is, is there any way to rebuild the corrupted DB? After rebuilding the DB, I need to back it up and restore it into a brand new 4.1 CallManager server. Could you please help?
Thanks,Hi Bahman,
Just to add to Greg's excellent post;
You cannot upgrade directly from Cisco CallManager Release 3.2 or earlier to Cisco CallManager Release 4.1. If your server runs a version of Cisco CallManager Release 3.2 or earlier, you must first upgrade every server in the cluster to the latest version of Cisco CallManager Release 3.3 or 4.0 before you can upgrade to a version of Cisco CallManager Release 4.1. For information on upgrading to Cisco CallManager Release 3.3, refer to the latest version of Upgrading Cisco CallManager Release 3.3. (I think 3.3.5sr3). This is a major undertaking that will require some major planning and probably a Lab set up. The change from 3.1 to 3.3 involves a complete SQL upgrade from SQL7 to SQL2000 along with the server which went from 5.5 to Windows 2000
I believe. We spent a great deal of time in the lab on this build.
From this doc;
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_installation_guide_chapter09186a00803fd70b.html
Upgrading Cisco CallManager Release 3.3(5)
http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_installation_guide09186a0080379983.html#wp162154
Hope this helps!
Rob -
Transfer of xml file elements to data base columns
hi all,
i have to store xml file's data(element values) into the data base(table columns).
i heard that we can acheive this by XSU.
IS it is mediator between xml and db? if yes how to install it.
i tried something as below
with t as (
select xmltype('<Message-Header>
<Message-Id>1234</Message-Id>
<Sender-Company-ID>4569</Sender-Company-ID>
<Sender-Company-Name>abc company</Sender-Company-Nam
<Sender-User-ID>AA</Sender-User-ID>
<Recv-Company-ID>050</Recv-Company-ID>
<Recv-Company-Name>XYZ pvt.ltd</Recv-Company-Name>
<Creation-Time>20101019 15:59:39</Creation-Time>
</Message-Header>') as xml from dual
)but i am getting following error. can anybody explain about this
SQL> ed
Wrote file afiedt.buf
1 with t as (
2 select xmltype('<Message-Header>
3 <Message-Id>1234</Message-Id>
4 <Sender-Company-ID>4569</Sender-Company-ID>
5 <Sender-Company-Name>abc company</Sender-Company-Name>
6 <Sender-User-ID>AA</Sender-User-ID>
7 <Recv-Company-ID>050</Recv-Company-ID>
8 <Recv-Company-Name>XYZ pvt.ltd</Recv-Company-Name>
9 <Creation-Time>20101019 15:59:39</Creation-Time>
10 </Message-Header>') as xml from dual
11* )
SQL> /
with t as (
ERROR at line 1:
ORA-01041: internal error. hostdef extension doesn't existPlease help me..
my db version is Oracle Database 10g Release 10.2.0.1.0 - ProductionHi,
What are you trying to achieve with a single WITH clause and no SELECT?
Please see this from the documentation if you want to use it properly :
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_10002.htm#i2077142
Apart from its true purpose of subquery factoring, the WITH clause is often use here and there to simulate a table content, but you'll always need a SELECT.
Maybe that's what you were trying to do?
As for your question, starting with release 10.2, Oracle provides XMLTable to shred XML documents into relational structures.
For example,
with t as (
select xmltype('<Message-Header>
<Message-Id>1234</Message-Id>
<Sender-Company-ID>4569</Sender-Company-ID>
<Sender-Company-Name>abc company</Sender-Company-Name>
<Sender-User-ID>AA</Sender-User-ID>
<Recv-Company-ID>050</Recv-Company-ID>
<Recv-Company-Name>XYZ pvt.ltd</Recv-Company-Name>
<Creation-Time>20101019 15:59:39</Creation-Time>
</Message-Header>') as xml from dual
select x.*
from t,
XMLTable(
'/Message-Header'
passing t.xml
columns
message_id number path 'Message-Id',
sender_company_id number path 'Sender-Company-ID',
sender_company_name varchar2(30) path 'Sender-Company-Name',
sender_user_id varchar2(30) path 'Sender-User-ID',
recv_company_id varchar2(30) path 'Recv-Company-ID',
recv_company_name varchar2(30) path 'Recv-Company-Name',
creation_time varchar2(30) path 'Creation-Time'
) x
;If you're working in PL/SQL, and the XML resides in a variable, you can directly do (with necessary datatype conversion in the SELECT) :
insert into your_table ( <your_columns_list> )
select <your_columns_list>
from XMLTable(
'/Message-Header'
passing your_xml_var
columns
message_id number path 'Message-Id',
sender_company_id number path 'Sender-Company-ID',
sender_company_name varchar2(30) path 'Sender-Company-Name',
sender_user_id varchar2(30) path 'Sender-User-ID',
recv_company_id varchar2(30) path 'Recv-Company-ID',
recv_company_name varchar2(30) path 'Recv-Company-Name',
creation_time varchar2(30) path 'Creation-Time'
) x
; -
How to export a data as an XML file from oracle data base?
could u pls tell me the step by step procedure for following questions...? how to export a data as an XML file from oracle data base? is it possible? plz tell me itz urgent requirement...
Thankz in advance
BalaSQL> SELECT * FROM v$version;
BANNER
Oracle DATABASE 11g Enterprise Edition Release 11.1.0.6.0 - Production
PL/SQL Release 11.1.0.6.0 - Production
CORE 11.1.0.6.0 Production
TNS FOR 32-bit Windows: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
5 rows selected.
SQL> CREATE OR REPLACE directory utldata AS 'C:\temp';
Directory created.
SQL> declare
2 doc DBMS_XMLDOM.DOMDocument;
3 xdata XMLTYPE;
4
5 CURSOR xmlcur IS
6 SELECT xmlelement("Employee",XMLAttributes('http://www.w3.org/2001/XMLSchema' AS "xmlns:xsi",
7 'http://www.oracle.com/Employee.xsd' AS "xsi:nonamespaceSchemaLocation")
8 ,xmlelement("EmployeeNumber",e.empno)
9 ,xmlelement("EmployeeName",e.ename)
10 ,xmlelement("Department",xmlelement("DepartmentName",d.dname)
11 ,xmlelement("Location",d.loc)
12 )
13 )
14 FROM emp e
15 , dept d
16 WHERE e.DEPTNO=d.DEPTNO;
17
18 begin
19 OPEN xmlcur;
20 FETCH xmlcur INTO xdata;
21 CLOSE xmlcur;
22 doc := DBMS_XMLDOM.NewDOMDocument(xdata);
23 DBMS_XMLDOM.WRITETOFILE(doc, 'UTLDATA/marco.xml');
24 end;
25 /
PL/SQL procedure successfully completed.
. -
Im trying to build user expiration into my registration form, but I cant get the form to send back the date registering.
in my data base i have tried every thing from timestamp to datetime. I can get a timestamp but it is not functioning with the expiration?just have a look at my tutorial Login tables: installation & configuration where the required column attributes are explained and where you can obtain a fully functional SQL dump for a typical ADDT "login" and (optionally) "login_stats" table.
BTW, "expiration" will have to be an "int" column.
Cheers,
Günter -
Quota Generation not happen's on Pro data basis .
Dear experts,
Time evalution status - 1.
1.Employee service 0 - 5 years - 24 Days entitlement
2.Employee service 5 - 10 years - 29 days entitlement.
when generating quota for employee less than five years its calculating correctly.when come's to employee more than 5 years its not calculating on pro-data basis of employee joining month. Instead of Month it's looking at the year and calculating it.
DOJ of employee
Mar-09
Year
TOTAL quota accrued
2009
20
2010
24
2011
24
2012
24
2013
24
Client requirement
System calculation as of now
2014
28
29
Calculation part.
below screen shot show how system calculating and how client needed.
how this scenario can be configured.
Regards
VinodhCheck the Deduction rule for that Quota
once check the Groupings for ESG and PSA
V_001P_ALL
V_503_ALL -
How to stored data after clicking checkbox in data base table
REPORT ZT .
TYPE-pools: slis.
tables:mkpf,mseg,mard,COWB_COMP,ZTABLE.
Types:BEGIN OF tp_data,
mblnr LIKE mseg-mblnr,
matnr LIKE mseg-matnr,
werks LIKE mard-werks,
lgort LIKE mard-lgort,
lgpbe LIKE mard-lgpbe,
charg LIKE mseg-charg,
bwart LIKE mseg-bwart,
budat LIKE mkpf-budat,
menge LIKE mseg-menge,
meins LIKE mseg-meins,
kostl LIKE mseg-kostl,
aufnr LIKE mseg-aufnr,
rsnum LIKE mseg-rsnum,
endkz like COWB_COMP-endkz,
END OF tp_data,
tp_tbl_data TYPE STANDARD TABLE OF tp_data.
MODIFIED*******************
DATA: WA TYPE TP_DATA.
MODIFIED*******************
*data: t_data like Y00_MM_ISSUE_DAT occurs 0 with header line.
Constants
Data objects (variable declarations and definitions)
Report data to be shown.
DATA: it_data TYPE STANDARD TABLE OF tp_data.
MODIFIED*******************
DATA : V_REPID LIKE SY-REPID.
MODIFIED*******************
Heading of the report.
DATA: t_heading TYPE slis_t_listheader.
*========================== Selection Screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
smatnr FOR mseg-matnr MODIF ID m2,
swerks FOR mard-werks MODIF ID m3,
slgort FOR mard-lgort MODIF ID m4,
slgpbe FOR mard-lgpbe MODIF ID m5,
scharg FOR mseg-charg MODIF ID m6,
sbwart FOR mseg-bwart MODIF ID m7,
skostl FOR mseg-kostl MODIF ID m8,
saufnr FOR mseg-aufnr MODIF ID m9,
srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
pse RADIOBUTTON GROUP radi,
bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
MODIFIED*******************
INITIALIZATION.
V_REPID = sy-repid.
MODIFIED*******************
*=========================== Event Blocks
AT selection-SCREEN.
start-OF-selection.
PERFORM get_data USING it_data.
END-OF-selection.
PERFORM build_alv USING it_data t_heading.
*=========================== Subroutines
*& Form get_data
Gets the information to be shown in the report.
FORM get_data USING t_data TYPE tp_tbl_data.
SELECT msegmblnr msegmatnr mardwerks mardlgort mard~lgpbe
msegcharg msegbwart mkpf~budat
msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO CORRESPONDING FIELDS OF TABLE t_data
FROM mseg
JOIN mard ON mardmatnr EQ msegmatnr
JOIN mkpf ON msegmblnr EQ mkpfmblnr
WHERE mseg~matnr IN smatnr.
ENDFORM. " get_data
*& Form build_alv
Builds and display the ALV Grid.
FORM build_alv USING t_data TYPE tp_tbl_data
t_heading TYPE slis_t_listheader.
ALV required data objects.
DATA: w_title TYPE lvc_title,
w_comm TYPE slis_formname,
w_status TYPE slis_formname,
x_layout TYPE slis_layout_alv,
t_event TYPE slis_t_event,
t_fieldcat TYPE slis_t_fieldcat_alv,
t_sort TYPE slis_t_sortinfo_alv.
REFRESH t_fieldcat.
REFRESH t_event.
REFRESH t_sort.
CLEAR x_layout.
CLEAR w_title.
Field Catalog
PERFORM set_fieldcat2 USING:
1 'MBLNR' 'MBLNR' 'MSEG' space space space space space space
space space space space space space t_fieldcat ,
2 'MATNR' 'MATNR' 'MSEG' space space space space space space
space space space space space space t_fieldcat ,
3 'WERKS' 'WERKS' 'MARD' space space space space space space
space space space space space space t_fieldcat,
4 'LGORT' 'LGORT' 'MARD' space space space space space space
space space space space space space t_fieldcat ,
5 'LGPBE' 'LGPBE' 'MARD' space space space space space space
space space space space space space t_fieldcat ,
6 'CHARG' 'CHARG' 'MSEG' space space space space space space
space space space space space space t_fieldcat ,
7 'BWART' 'BWART' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
8 'BUDAT' 'BUDAT' 'MKPF' space space space space space space
space space space space space space t_fieldcat,
9 'MENGE' 'MENGE' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
10 'MEINS' 'MEINS' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
11 'KOSTL' 'KOSTL' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
12 'AUFNR' 'AUFNR' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
13 'RSNUM' 'RSNUM' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
14 'ENDKZ' 'ENDKZ' 'COWB_COMP' space space 'select' 'Select this row' 'Sel' 'Select this row' space space space 'X' 'X' space t_fieldcat.
Layout
x_layout-zebra = 'X'.
Top of page heading
PERFORM set_top_page_heading USING t_heading t_event.
Events
PERFORM set_events USING t_event.
GUI Status
w_status = ''.
User commands
w_comm = 'USER_COMMAND'.
Order
Example
PERFORM set_order USING '<field>' 'IT_DATA' 'X' space space t_sort.
PERFORM set_order USING 'MBLNR' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELN' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELP' 'IT_DATA' 'X' space space t_sort.
Displays the ALV grid
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = V_REPID
it_fieldcat = t_fieldcat
is_layout = x_layout
it_sort = t_sort
i_callback_pf_status_set = w_status
i_callback_user_command = w_comm
i_save = 'X'
it_events = t_event
i_grid_title = w_title
TABLES
t_outtab = t_data
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " build_alv.
*& Form set_top_page_heading
Creates the report headings.
FORM set_top_page_heading USING t_heading TYPE slis_t_listheader
t_events TYPE slis_t_event.
DATA: x_heading TYPE slis_listheader,
x_event TYPE LINE OF slis_t_event.
Report title
CLEAR t_heading[].
CLEAR x_heading.
x_heading-typ = 'H'.
x_heading-info = 'Reporte Prueba'(001).
APPEND x_heading TO t_heading.
Program name
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Program: '.
x_heading-info = sy-repid.
APPEND x_heading TO t_heading.
User who is running the report
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'User: '.
x_heading-info = sy-uname.
APPEND x_heading TO t_heading.
Date of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Date: '.
WRITE sy-datum TO x_heading-info.
APPEND x_heading TO t_heading.
Time of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Time: '.
WRITE sy-uzeit TO x_heading-info.
APPEND x_heading TO t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-FORM = 'TOP_OF_PAGE'.
APPEND x_event TO t_events.
ENDFORM.
*& Form set_events
Sets the events for ALV.
The TOP_OF_PAGE event is alredy being registered in
the set_top_page_heading subroutine.
FORM set_events USING t_events TYPE slis_t_event.
DATA: x_event TYPE LINE OF slis_t_event.
Example
clear x_event.
x_event-name = .
x_event-form = .
append x_event to t_event.
ENDFORM.
*& Form set_order
Adds an entry to the order table.
FORM set_order USING p_fieldname p_tabname p_up p_down p_subtot
t_sort TYPE slis_t_sortinfo_alv.
DATA: x_sort TYPE slis_sortinfo_alv.
CLEAR x_sort.
x_sort-fieldname = p_fieldname.
x_sort-tabname = p_tabname.
x_sort-UP = p_up.
x_sort-down = p_down.
x_sort-subtot = p_subtot.
APPEND x_sort TO t_sort.
ENDFORM. "set_order
*& Form set_fieldcat2
Adds an entry to the field catalog.
FORM set_fieldcat2 USING p_colpos p_fieldname p_ref_fieldname
p_ref_tabname
p_outputlen p_noout
p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
p_hotspot p_showasicon p_checkbox p_edit
p_dosum
t_fieldcat TYPE slis_t_fieldcat_alv.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-col_pos = p_colpos.
wa_fieldcat-no_out = p_noout.
wa_fieldcat-HOTSPOT = p_hotspot.
wa_fieldcat-CHECKBOX = p_checkbox.
wa_fieldcat-ICON = p_showasicon.
wa_fieldcat-do_sum = p_dosum.
Set reference fieldname, tablenam and rollname.
If p_ref_tabname is not given, the ref_fieldname given is a data
*element.
If p_ref_tabname is given, the ref_fieldname given is a field of a
*table. In case ref_fieldname is not given, it is copied from the
*fieldname.
IF p_ref_tabname IS INITIAL.
wa_fieldcat-rollname = p_ref_fieldname.
ELSE.
wa_fieldcat-ref_tabname = p_ref_tabname.
IF p_ref_fieldname EQ space.
wa_fieldcat-ref_fieldname = wa_fieldcat-fieldname.
ELSE.
wa_fieldcat-ref_fieldname = p_ref_fieldname.
ENDIF.
ENDIF.
Set output length.
IF NOT p_outputlen IS INITIAL.
wa_fieldcat-outputlen = p_outputlen.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
IF NOT p_seltext_l IS INITIAL.
wa_fieldcat-seltext_l = p_seltext_l.
ENDIF.
IF NOT p_seltext_s IS INITIAL.
wa_fieldcat-seltext_s = p_seltext_s.
ENDIF.
IF NOT p_reptext_ddic IS INITIAL.
wa_fieldcat-reptext_ddic = p_reptext_ddic.
ENDIF.
IF NOT p_ddictxt IS INITIAL.
wa_fieldcat-ddictxt = p_ddictxt.
ENDIF.
Set as editable or not.
IF NOT p_edit IS INITIAL.
wa_fieldcat-INPUT = 'X'.
wa_fieldcat-EDIT = 'X'.
ENDIF.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM. "set_fieldcat2
*& Form top_of_page
Called on top_of_page ALV event.
Prints the heading.
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
i_logo = 'TRVPICTURE04'
it_list_commentary = t_heading.
ENDFORM. " alv_top_of_page
*& Form user_command
Called on user_command ALV event.
Executes custom commands.
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
case sy-ucomm.
WHEN '&DATA_SAVE'.
LOOP AT IT_DATA INTO WA WHERE ENDKZ = 'X'.
IF WA-ENDKZ = 'X'.
*******MODIFIED*********************************
U DELETE THIS CODE N USER UR INSERT CODE TO CHECK
SY-MSGV1 = WA-MBLNR. " U CAN DELETE
SY-MSGV2 = WA-MATNR. " U CAN DELETE
MESSAGE ID 'BC_BOR' TYPE 'I' NUMBER '888' " U CAN DELETE
WITH SY-MSGV1 SY-MSGV2. " U CAN DELETE
*******MODIFIED*********************************
INSERT ZTABLE.
ENDIF.
endloop.
ENDCASE.
ENDFORM. "user_command
this is my code, database will stored in fields only.data is empty,
how to slove that one,send any sugestion.Hi Lakshmi,
Can u explain briefly what is ur requirement. U mean to say that after clicking the checkbox in data base table or Screen?
Regards,
Jayaram...
Maybe you are looking for
-
Best way to use Airport Extreme dual band with Netgear FR114P?
Years ago a friend connected via ethernet our G4 (10.4.11) and an old Blueberry iMac (10.4.11) to a Netgear FR114P Router(?) which is connected to a modem from TimeWarner Cable on our second floor. We also have an ethernet connection downstairs for a
-
Encore isn't Transcoding for me on my PC
I am new to using Encore and have been making my DVD's with Windows DVD Maker, then not long ago I started using Encore. The problem I may having with enocore is that when i place my project in encore and make my menu and everything then go to B
-
Best format for exporting raw footage to a Windows PC (for editing)
Hi. I have 2 hours of raw MiniDV PAL footage and I want to burn that to DVDs so a friend can edit it on a PC (with Premiere I think). I already had problems trying to play .mov footage (File>Export>QuickTime Movie...) on a Win PC. Tried installing di
-
Analitic functions (problem with SELECT)
Hi! I've got a problem with analitic functions (I'm newbie in this topic). I have a table gpw_notowania which have colums: not_open, not_minimum, not_maximum, not_close, not_volume, not_sp_id and not_date. I need to receive from database the informat
-
Hello, I could not find rcu for soa suite 11.1.1.4... Guess that should however be available. Could someone please send a pointer where to find it from? regards, Matti