Data bridge not working?

Hi there,
I am trying my first import into PCM via Data Bridge but cannot make it work.
i am using the coporate PCM10 VMWare.
Can you please tell me how I can find the root cause of this issue?
Here is the data before the import
I have created a very simple flat file
And a spec file
The log says that everything went fine but I cannot see any change via the grid after refreshing it....

Hi JB,
Your problem certainly comes from naming issues. In your grid I can see the line item “Production costs” (with a space). But in your input file it’s “ProductionCosts” without space. Look in your Line Item hierarchy, I bet you have a new item “ProductionCosts” at the root. Add to it the fact that you use space as a delimiter, you get your solution. Make sure your names are consistent and use a common delimiter like tab or semi column.
Regards
Jérémie

Similar Messages

DOCUMENT SETTING that ALLOW FUTURE POSTING DATE does not work in PL34

Hi Expert,
I am now using SAP B1 2005B (7.40.252) sp:00 pl:34 and realised that the ALLOW Future Posting Date was not working.
I still can remember while I was using pl:11 at B1 2005A, there is no such problem and wish to know when can the bug fix up? in which sp/pl?
Wish to hear goods news ASAP .
Thank you.
Joan.

Basically can you please clarrify your requirement as to what you want to change ..what I understand you would need to change the code for ABAP - RFEBBE00
Value Date code in the above abap
        IF PAR_VALD = 'X'.
          MOVE C2-VALDT TO HLP_VALDT. " VALUE DATE
         write hlp_valdt to umsatz-budat dd/mm/yy.
        ELSE.
          MOVE C8-BALDT TO HLP_BALDT.
          MOVE HLP_BALDT TO HLP_VALDT.
        write hlp_valdt to umsatz-budat dd/mm/yy.
        ENDIF.
           MOVE HLP_VALDT(2) TO UMSATZ-BUDAT.
           MOVE HLP_VALDT2(2) TO UMSATZ-BUDAT3.
           MOVE HLP_VALDT4(2) TO UMSATZ-BUDAT6.
Regards
Anurag
Message was edited by: Anurag Bankley

The Restriction option to NOT ALLOW CHANGES to Mobile or Cellular data does not work why is this ?

The Restriction option to NOT ALLOW CHANGES to Mobile or Cellular data does not work why is this ?

Hi there,
You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
Additionally, you may want to try completely disabling and re-enabling restrictions.
-Griff W.

Umm I just got this iPhone 5 and cellular data is not working, can't access apps, heck can't even download any and Safari...ummm yeah not happening. I'm with Sprint if that makes any difference.

Umm I just got this iPhone 5 and cellular data is not working, can't access apps, heck can't even download any and Safari...ummm yeah not happening. I'm with Sprint if that makes any difference.

Are you in an area where there is no coverage?
You can try a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
If that doesn't help, then yOu'll need to contact Sprint again.

HT1976 my cellular data is not working , how do i fix it

my cellular data is not working
when i turn it on it doesnt show
but ym wirless network works
i need help.
thanks

My cellular data stopped working when i update my iphone 5c to ios7.1 any help please

Bridge not working in Photoshop CC trial.

I had the same problem with Bridge in Photoshop CS6 on another computer, so brought a new computer and downloaded the trial. Bridge stopped working after about 2 hours.
I open bridge, select a photo, open in camera raw, make adjustments, then when I try to open image in either Photoshop CC or Elements 11 or 12 I get a message that Bridge has stopped working.

This forum is actually about the Cloud, not about using individual programs
Once your program downloads and installs with no errors, you need the program forum
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
http://forums.adobe.com/community/bridge
http://forums.adobe.com/community/photoshop
Photoshop Elements is not part of the Cloud, so ask those questions in that forum
Photoshop Elements Forum http://forums.adobe.com/community/photoshop_elements

My phone is so slow won't download any apps and data is not working correctly

I have the moto e with straight talk

Hi
This is not a Firefox thing, but there are some general housekeeping activities you can do to make your telephone run much easier.
First of all, uninstall any apps and widgets you do not need. It is amazing how they can clutter up your phone! In the app drawer, long press on an app or widget and drag it to the uninstall option at the top of the screen.
So you have a sizeable SD card in your phone? If so, in Settings app , scroll down to Storage and tap "Move media". As it says on the menu, this will move your media files to your memory card, thus freeing up space on your phone.
Before you leave Storage, scroll up a little and tap on "Cached Data" and selected to clear the cached data.
In Settings>Apps, scroll across to "On SD Card" and tick a few boxes to move some of your apps to your memory card. (Note: With some apps, this may mean that any accompanying widgets will not work, this is a bug with Android).
Once finished, turn off your phone and turn it back on again and you should find your phone has quite a bit more space and is running a bit quicker.

Help for date field not working after upgrade

hi experts,
In our BSP application for a page we had an inputfield (date).
Onvaluehelp for input field we were calling the saphelpdate function.
however after upgrade this functionality is not working properly as no pop up comes after clicking on the icon.
we have upgraded to SPS 16 recently.
please help me.
regards,
Arvind.

Hi, I try upper case but nothing happen. This is all my code by far, I hope you can help me:
DATA: BEGIN OF T_PCONT OCCURS 0,
      PCONT LIKE ZPSPERMISOS-PSOBKEY,
END OF T_PCONT.
DATA: BEGIN OF T_FIELDS OCCURS 0.
        INCLUDE STRUCTURE help_value.
DATA END OF T_FIELDS.
DATA: BEGIN OF T_VALUES OCCURS 0,
      VALUE(60) TYPE c.
DATA: END OF T_VALUES.
DATA: N TYPE i.
SELECTION-SCREEN BEGIN OF BLOCK b20 WITH FRAME TITLE text-b02.
SELECT-OPTIONS:
    P_CONT FOR ZPSPERMISOSH-PSOBKEY OBLIGATORY NO-EXTENSION NO INTERVALS,
    P_INT FOR ZPSPERMISOSH-PARTNER OBLIGATORY NO-EXTENSION NO INTERVALS,
    P_FEC FOR ZPSPERMISOSH-ZFINICN NO-EXTENSION NO INTERVALS,
    P_RAZ FOR ZPSPERMISOSH-ZRAZONFINIC NO-EXTENSION NO INTERVALS.
SELECTION-SCREEN END OF BLOCK b20.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_CONT-LOW.
PERFORM P_HELP_P_CONT USING P_CONT-LOW.
*&      Form P_HELP_P_CONT
FORM P_HELP_P_CONT USING P_P_CONT.
DESCRIBE TABLE T_PCONT LINES N.
IF N EQ 0.
    T_FIELDS-FIELDNAME = 'PSOBKEY'.
    T_FIELDS-TABNAME    = 'ZPSPERMISOS'.
    T_FIELDS-SELECTFLAG = 'X'.
    APPEND T_FIELDS.
    CLEAR T_FIELDS.
    SELECT PSOBKEY FROM ZPSPERMISOS
    INTO TABLE T_PCONT.
    SORT T_PCONT BY PCONT.
CALL FUNCTION 'HELP_VALUES_GET_WITH_TABLE'
    EXPORTING
      CUCOL        = 10
      CUROW        = 1
      TABNAME      = 'T_PCONT'
      FIELDNAME    = 'PCONT'
    IMPORTING
      SELECT_VALUE = P_P_CONT
    TABLES
      FIELDS       = T_FIELDS
      VALUETAB     = T_VALUES.
ENDFORM.                    " P_HELP_P_CONT
Edited by: J. Garibaldi on Nov 25, 2009 11:14 AM
Edited by: J. Garibaldi on Nov 25, 2009 11:16 AM

Date comparision not working in BI-Publisher in one scenario.

Hi,
Iam using sqlquery as a datamodel for BI-Publisher report. I have a requirement that the input parameters startdate and endate are Date types. When the user enters startdate and enddate and clicks on view, the report should show data which falls in between those dates.
Here is the sample query i used.
select * from
table1
where begintime >= :p_StartDate and begintime <=:p_EndDate
Here begintime is a timestamp and p_StartDate and p_EndDate are just dates. So when comparing begintime with p_StartDate/p_EndDate, i guess its taking default time from that date and because of that the comparision is failing in 1 case. i.e, In the above query, though the comparision operator is >= or <= , ultimately > or < is getting effective. So to acheive the actual result, I need to give one day more for start and end dates.
However I found a way to acheive this without adding extra day to both the dates. Here it is :
select * from table1 where
( begintime >= to_timestamp(to_char(:p_StartDate) || '00 00 00', 'DD Mon YYYY HH24 MI SS')) and
( begintime <= to_timestamp(to_char(:p_EndDate) || '23 59 59', 'DD Mon YYYY HH24 MI SS'))
But the above is working in sqleditor like jdeveloper database navigator. But not working in BI-Publisher.
BI-Publisher is throwing error saying
"ORA-01830: date format picture ends before converting entire input string"
Please help as to how to go about this problem or any alternative solution.
Thanks & Regards,
-Vijay-

Hi,
I think it will be fine to trunc the begin time since :p_StartDate and p_EndDate are just dates without time stamp
i.e:
select * from
table1
where trunc(begintime) >= :p_StartDate and trunc(begintime) <=:p_EndDate;
any problem with this.Please share the thought.
Best Regards,
mahi

Global Data Plan not working in the Netherlands

I called customer service a week before my trip and arranged for the $30 "Global Data" plan to begin April 1. I have been unable to get a data connection here in the Netherlands and e-mails to customer service have gone unanswered. I cannot see anything on my account to indicate whether this has ever been activated.
By poking around the settings and setting the data networks to GSM I've been able to see Vodophone, T-Mobile, and KPN listed, but if I try to connect to any of them I get an error that indicates I cannot connect to them.
Can anyone provide some advice on how to get this working? I was really relying on this to help with getting info on places to visit and it's proving a pretty difficult trip when having to rely on free wifi spots to make up for this.

roninacolyte,
Greetings from the states! To be honest, the Thunderbolt will not work in Hong Kong. You can check out our trip planner for future reference at http://vz.to/n9PFe9
EvanO_VZW
Follow us on Twitter @VZWSupport

Sessions.xml data source not working using toplink

I'm having some difficulty getting a data source to work. I have an ADF selectOneChoice component and I want the list of values available to be bound to a database given by the JNDI name and controlled at the j2ee container level.
I have created a sessions.xml file
<toplink-configuration>
<session>
<name>PIMSSession</name>
<project-xml>META-INF/PIMS_ADF_TLMap.xml</project-xml>
<session-type>
<server-session/>
</session-type>
<login>
<datasource>jdbc/PIMSDS</datasource>
<uses-external-connection-pool>true</uses-external-connection-pool>
</login>
<connection-pool>
<is-read-connection-pool>true</is-read-connection-pool>
<name>default</name>
<login>
<datasource>jdbc/PIMSDS</datasource>
<platform-class>Oracle10g</platform-class>
<uses-external-connection-pool>true</uses-external-connection-pool>
</login>
</connection-pool>
</session>
</toplink-configuration>
The sessions.xml points to the toplink mapping file PIMS_ADF_TLMap.xml, which contains information about the database view that is used to populate the drop down list. It also contains a deployment connection:
<toplink:login xsi:type="toplink:database-login">
<toplink:platform-class>oracle.toplink.platform.database.oracle.Oracle10Platform</toplink:platform-class>
<toplink:user-name>pimsdev</toplink:user-name>
<toplink:password>BB742416276274A494F7008B3AE0FB10</toplink:password>
<toplink:driver-class>oracle.jdbc.OracleDriver</toplink:driver-class>
<toplink:connection-url>jdbc:oracle:thin:@yvworad01:1521:PIMSD</toplink:connection-url>
</toplink:login>
The problem I'm having is that my ADF application always binds the selectOneChoice to the connection-url in the toplink mapping file instead of the datasource in the sessions.xml.
If I remove the deployment connection from the mwp file, recompile and deploy I get a JBO-29000 error about not having a suitable driver.
Does anyone know how to get the selectOneChoice to bind to a datasource instead of the toplink mapping connection-url?

Hi Aaakar,
From the error message, please try to change the setting of Credential type for the data source on report manager as follows:
Go to the Data Sources properties page.
For the Connect Using option, select Credentials stored securely in the report server.
In User Name and Password, type credentials that can be used to access the database. If you are using SQL Server as the data source, the user name must be valid for both logging on to the server and for accessing the database that contains the data for
the report.
If the user name and password are credentials for a Windows account, select Use as Windows Credentials.
If you want the report server to pass the credentials of the user accessing the report to the server hosting the external data source, click Windows Integrated Security. In this case, the user is not prompted to type a user name or password.
For more details about Configure Data Source Properties, please see:
http://technet.microsoft.com/en-us/library/ms155882.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Photoshop CS5 Bridge not working

I have windows 7 and cannot get the Bridge from Photoshop CS5 to work this is a real problem as most of my photographs are taken in RAW and I can't see the picture in the folder
I have tried most of the answers to this problem from the forum. Launching from start menu and through Program Files doesn't work. Not sure how to change from 64 bit to 32 bit in Windows 7
Adobe if you read this why not solve a problem instead of just bringing out a new version and expecting us to purchase this?

You need to give more details. Why does it not work - error message, crash, freeze, never worked, worked yesterday?
Does it work when launched as seperate program from Bridge icon?

Mini Bridge not working in CS5

I cannot get Mini Bridge to work in Photoshop CS5. When I try to start it, the panel opens and the spinning symbol starts but I get the message "Waiting for Bridge CS5..." and it never makes it past that. I have tried both with Bridge already open and Bridge closed, no difference. "Start Bridge at logon" is checked in preferences. Any help will be appreciated.

Hi,
Try the solutions listed in the following tech note:
http://kb2.adobe.com/cps/830/cpsid_83045.html
If you're still unable to get it working, let me know and I'll try to troubleshoot further.
Regards,
Julie Manley
Adobe

JMS Bridge not Working

Hi,
I have a weblogic 9.2 running one application.
I what that application to post messages on a internal JMS queue. That message gets fw to a Weblogic 8 JMS queue.
To achieve this I created a JMS Bridge with the Weblogic 8 destination, and the Weblogic 9 source.
When i activate the bridge, i did not see anything on the logs, so i restarted the server.
Once the server was Up I went to check how many consumers where register on my internal queue, and to my surprise there where none.
I posted a message to that queue and still nothing. not even on the logs.
On the source and destination, i put the following:
Adapter JNDI Name: the XA one
Classpath: weblogic.jar
Connection URL: t3://172.16.76.28:8001 on the internal and t3://172.16.76.29:7001 on the external
weblogic.jndi.WLInitialContextFactory: weblogic.jndi.WLInitialContextFactory
and the JNDI stuff, user and password.
I do not see anything in the logs. Any idea?

I would like to make sure that I understand where you are now.
1. The bridge is always running on 9.2.
2. When the bridge is configured to forward messages from local (9.2) to remote (8.1), everything works.
3. When the bridge is configured to forward messages from remote to local, you run into the SecurityException.
Is my understanding correct? Where did you see the Exception (on the 9.2 side or the 8.1 side)?
Are you always using the adapter from the same release as the server that is running the bridge?
Assuming that you have configured everything correctly, I don't see why remote-to-local case does not work for you. There was an issue similar to what you are seeing in 8.1 GA, which has been fixed in 8.1SP1 and 9.2. You should not see this issue as long as your bridge is running on 9.2 (or 8.1SP1) or later.
At this point you could try the following:
1. Change the bridge to run in sync mode (by setting AsyncEnabled to false, the default is true) and see if the problem persists.
2. Enable domain trust on both the 9.2 and 8.2 domains (see http://edocs.bea.com/wls/docs92/bridge/wls_interop.html#wp1126213 for details).
3. Run the bridge on 8.1 (using the 8.1 adapter) to forward messages to 9.2. (I know the doc recommends that one should run the bridge on the later version of WebLogic when forwarding between two different releases, but it does not hurt to try as long as your source destination is on the same release are the bridge).
Thanks,
Dongbo

Javascript Date() function not working

Hi,
I'm experiencing some problems with the Date() function in javascript. The problem is that the function doesn't seem to work. For example when I do "var date = new Date(); xfa.host.messageBox(date);" in the enter event of a date field, I get "Date is not a function" error message in de javascript debugger.
Is there anyone out there who knows how why the Date function is not working in LiveCycle Designer. Am I using the Date function in an improper way or maybe I am using the wrong function?
Please can anyone help me out?

Hi Paul,
Thanx for you reply. It worked fine.
I also found out that following works as well:
var MyDate = util.scand("dd-mm-yyyy",new Date());
console.println("this date: "+util.printd("dd-mm-yyyy", MyDate));

Data bridge not working?

Similar Messages

Maybe you are looking for