Data Cache usage 96%
Hi Experts,
With total 7 planning versions and total size of 9GB, the data cache is constantly filling up
Total 14GB allocated and each time we create a new version the usage goes up by 10%.
There are no old sessions more than 4 hrs and when 5 planners starts working simutaneously, the cache starts filling up
Thanks,
Naren
> With total 7 planning versions and total size of 9GB, the data cache is constantly filling up
>
> Total 14GB allocated and each time we create a new version the usage goes up by 10%.
>
> There are no old sessions more than 4 hrs and when 5 planners starts working simutaneously, the cache starts filling up
Now what?
You create multiple versions of liveCache objects in parallel - of course the cache usage will increase (and also the used space in the data area).
That's how the multi-version-data-handling works.
A copy of the current version is created for each new version.
So either add more cache, reduce your planning version complexity/size or do less in parallel if you want to prevent the cache from beeing used 100%.
regards,
Lars
Similar Messages
-
Livecache data cache usage - table monitor_caches
Hi Team,
We have a requirement of capturing the Data cache usage of Livecache on an hourly basis.
Instead of doing it manually by going into LC10 and copying the data into an excel, is there a table which captures this data on a periodic basis which we can use to get the report at a single shot.
"monitor_caches" is one table which holds this data, but we are not sure how we can get the data from this table. Also, we need to see the contents of this table, we are not sure how we can do that.
As "monitor_caches" is a maxdb table I am not sure how I can the data from this table. I have never worked on Maxdb before.
Has anyone had this requirement.
Warm Regards,
VenuHi,
For Cache usage below tables can be referred
Data Cache Usage - total (table MONITOR_CACHES)
Data Cache Usage - OMS Data (table MONITOR_CACHES)
Data Cache Usage - SQL Data (table MONITOR_CACHES)
Data Cache Usage - History/Undo (table MONITOR_CACHES)
Data Cache Usage - OMS History (table MONITOR_CACHES)
Data Cache Usage - OMS Rollback (table MONITOR_CACHES)
Out Of Memory Exceptions (table SYSDBA.MONITOR_OMS)
OMS Terminations (table SYSDBA.MONITOR_OMS)
Heap Usage (table OMS_HEAP_STATISTICS)
Heap Usage in KB (table OMS_HEAP_STATISTICS)
Maximum Heap Usage in KB (table ALLOCATORSTATISTICS)
System Heap in KB (table ALLOCATORSTATISTICS)
Parameter OMS_HEAP_LIMIT (KB) (dbmrfc command param_getvalue OMS_HEAP_LIMIT)
For reporting purpose , look into the following BW extractors and develop BW report.
/SAPAPO/BWEXDSRC APO -> BW: Data Source - Extractor
/SAPAPO/BWEXTRAC APO -> BW: Extractors for Transactional Data
/SAPAPO/BWEXTRFM APO -> BW: Formula to Calculate a Key Figure
/SAPAPO/BWEXTRIN APO -> BW: Dependent Extractors
/SAPAPO/BWEXTRMP APO -> BW: Mapping Extractor Structure Field
Hope this helps.
Regards,
Deepak Kori -
I'm using Kodo 2.3.2 running in a managed environment (JBoss 3.x). I have
it configured to use the "LocalCache" for caching of object instances and I
can see that the cache is working.
Does anyone know how I can get a reference to the DataCache? There is
example code in section 7.3.2 of the Kodo Manual, but that code doesn't
compile for me.
The specific code from the manual is:
PersistenceManagerFactoryImpl factory = (PersistenceManagerFactoryImpl)
pm.getPersistenceManagerFactory();
factory.getDataCache().pin(JDOHelper.getObjectId(o));
The PersistenceManagerFactoryImpl doesn't have a method "getDataCache".
Thanks in advance.Oops; that should be 'factory.getConfiguration ().getDataCache ()'.
-Fred
In article <amphkp$bes$[email protected]>, TJanusz wrote:
I'm using Kodo 2.3.2 running in a managed environment (JBoss 3.x). I have
it configured to use the "LocalCache" for caching of object instances and I
can see that the cache is working.
Does anyone know how I can get a reference to the DataCache? There is
example code in section 7.3.2 of the Kodo Manual, but that code doesn't
compile for me.
The specific code from the manual is:
PersistenceManagerFactoryImpl factory = (PersistenceManagerFactoryImpl)
pm.getPersistenceManagerFactory();
factory.getDataCache().pin(JDOHelper.getObjectId(o));
The PersistenceManagerFactoryImpl doesn't have a method "getDataCache".
Thanks in advance.
Fred Lucas
SolarMetric Inc.
202-595-2064 x1122
http://www.solarmetric.com -
High cache usage of free memory
I dont know if this is normal but my fresh archlinux x86_64 install with Xfce uses round 300Mb of 4Gb ram space after boot but then after i start and close some programs i get to 3 Gb used of 3.87 Gb free memory when all applycation are closed. Now i understand that kernel caches some data in memory but i cant clear it all with commands:
sync
echo 1 > /proc/sys/vm/drop_caches
echo 2 > /proc/sys/vm/drop_caches
echo 3 > /proc/sys/vm/drop_caches
After i do that system reports 540 Mb used compared to 300Mb from boot. Is there a way to limit the ammount of cache usage so i dont end up having all free memory used by cache?
Last edited by Anril (2009-12-29 13:19:52)Ram that is unused is wasted ram, the linux kernel manages it very well so no worries there.
If you have swap usage it's because most probably you have things stored in the ram that are not being used often but cannot be discarded too so things being used more often take precedence.
If you think you have enough ram for all your needs then why not disable swap? I've read that there might be a speed penalty for running without swap but I've been running my system without swap (arch64 4G ram) and I've never had any bad surprises.
There are a few things that might prompt swap usage (don't quote me on that though, it just seems to me to be the case), if you copy many files from one place to the other the kernel will use all the ram available to try to cache them, if you copy many GB then all the ram will get filled (and maybe other things will get evicted to swap).
It's not a bug, free ram is there to be used, things that have been used/needed recently get to stay in the ram, other things can go to the swap, if you can cache a file that has been recently used and need to use it again shortly after then it's much faster if it is in the ram instead of having to read it again from the hard disk. The logic behind it is good, it's just that some corner cases may make behave badly. -
When I go the iphone menu: Setting > General > Usage, I can see the size of each App.
Most apps are relatively small in size, but the Info & data size grows everyday as I use the apps.
example like Facebook, the FB app is only 14MB, but my data size is more than 1.4GB.
beside deleting the app & reinstalling, is there any way to reset this data? ... well - Apple only has a Delete button on that page.
I know deleting & reinstalling will bring the app back to 14MB, & there's no data lost on my FB page. But this method is not so efficient when there are hundreds of apps' data cache to clear...
anyone has any idea how to clear this data cache for apps?hi pvonk,
thanks for the pointer, I've tried that but it didn't clear the App data cache. -
Error in Starting Oracle BAM Active Data Cache
I am not able to start "Oracle BAM Active Data Cache" on my machine.
The other two components "Oracle BAM Event Engine" and "Oracle BAM Report Cache" are starting properly.
When I see the event log file of my Computer I could see the details as below:
Event Type: Error
Event Source: Oracle BAM Active Data Cache
Event Category: None
Event ID: 0
Date: 2/7/2007
Time: 3:51:25 PM
User: N/A
Computer: CHNANDA-WXP
Description:
ActiveDataCache: The Oracle BAM Active Data Cache service failed to start. Oracle.BAM.ActiveDataCache.Common.Exceptions.CacheException: ADC Server exception in Startup(). ---> Oracle.DataAccess.Client.OracleException ORA-12541: TNS:no listener at Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, String procedure)
at Oracle.DataAccess.Client.OracleConnection.Open()
at Oracle.DataAccess.Client.OracleConnection.Open()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.GetServerVersion()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.Startup(IDictionary oParameters)
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.Startup()
--- End of inner exception stack trace ---
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.Startup()
at Oracle.BAM.ActiveDataCache.Kernel.Server.Server.Startup()
at Oracle.BAM.ActiveDataCache.Service.DataServer.Run()
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Could anyone pls help me?
Thanks and Regards,
Chinmaya Nandahi Chinmaya -can yoy tell us your companyname,project ? Your problem is very simple.BAM ADC is notable to reachoracle db.fromyour dos prompt- try tnsping <yrDB> [default is oraclebam or orcl ]/ Also see FAQ pages. there is a requirement on dos prompt setting, with <clientforBAM>as 1st parameter
-
Unable to change stock posting date at usage decision while inspecting HUs
If we were using materials without WMS it's simple: thereu2019s a button in the screen for stock posting by which we're able to change document date and posting date; but we're using WM and the screen is slightly different: the button I'm referring it's gone!
So, how to change the posting date at posting stock in QA11 when we're using handle units? Some end-user told me that in version 4.7 this was possible. I don't think so ...unless there was something customized at WM IMG...or maybe they were using a USER EXIT to bring a pop-up window for this (I'm starting to believe that this was implemented..). This is the first time I work with HUs, so I don't know how to manage this.
Anyone?
Seba
Edited by: Sebastian Sniezyk on Apr 3, 2009 10:16 AMI solved it in this topic: Changing posting date at usage decision for handle units. How?
-
Web Application - Data caching of enterprise data
Sorry in advance if this is off-topic but I can't find anywhere else to post this type of question.
I am looking for information/suggestions such as books, technology or design methodology for my enterprise web applications. These sites are currently up and functional using only JSP, servlets and regular Java classes stored in a web application session to provide data caching and access. We are using Weblogic Server 6.1 running on an AIX Unix system at this time. I'm not sure that this is the best design architecture as our web sessions are getting too large but I can't think of any other Java technology to use and I need some help. Here's an overview of our environment and our needs.
Our core data is held in a mainframe based IMS system. Some DB2 is also used. Access to this data is through IMS COBOL transactions which we can execute with IMS Connect. We also use some JDBC to get to the DB2 tables directly where available.
Some overall application data is cached when the web application is deployed. We use singleton classes which are created and refreshed at deployment and they then refresh themselves from the sources every 24 hours.
Each time a user logs in we execute several IMS transactions and JDBC calls to cache user specific data in regular Java classes which are then simply placed in the users web session where we access them from JSP, servlets and other Java classes. The fields in these Java classes range from any type of primitive field to TreeMaps of other Java classes. As the data is cached it is sorted and other fields are calculated and stored in these classes. As the user progresses through the system we then may have to do several other IMS transaction and JDBC calls to collect other types of data. All of this is then also added to the users session. Most of this in inquiry. We do allow transactions but those are built from user input and data already cached and are then we just execute the IMS transactions with the input.
As our application has grown these Java classes have gotten larger and larger. And since these are simply stored in server memory in the web sessions then these are also getting huge. I'm concerned that this is not the best way for this application to be architected. Is there something else we should be doign? I simply don't understand how Entity Java Beans could be used but then again I don't know much about them. I wouldn't think that caching the data to a local database and accessing it from there would be any more efficient and would probably just slow down the system from all the I/O.
Any help or direction would be greatly appreciated.The best book you can buy is 'Professional Java Server Programming, j2ee edition' by Wrox. It is by far the best reference I've used. Another quick reference consideration might be the j2ee book provided by codenotes... its quick and to the point.
-
Hi,
Our Environment is Essbase 11.1.2.2 and working on Essbase EAS and Shared Services components.One of our user tried to run the Cal Script of one Application and faced this error.
Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).
I have done some Google and found that we need to add something in Essbase.cfg file like below.
1012704 Dynamic Calc processor cannot lock more than number ESM blocks during the calculation, please increase CalcLockBlock setting and then retry (a small data cache setting could also cause this problem, please check the data cache size setting).
Possible Problems
Analytic Services could not lock enough blocks to perform the calculation.
Possible Solutions
Increase the number of blocks that Analytic Services can allocate for a calculation:
Set the maximum number of blocks that Analytic Services can allocate to at least 500.
If you do not have an $ARBORPATH/bin/essbase.cfg file on the server computer, create one using a text editor.
In the essbase.cfg file on the server computer, set CALCLOCKBLOCKHIGH to 500.
Stop and restart Analytic Server.
Add the SET LOCKBLOCK HIGH command to the beginning of the calculation script.
Set the data cache large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH setting.
Determine the block size.
Set the data catche size.
Actually in our Server Config file(essbase.cfg) we dont have below data added.
CalcLockBlockHigh 2000
CalcLockBlockDefault 200
CalcLockBlocklow 50
So my doubt is if we edit the Essbase.cfg file and add the above settings and restart the services will it work? and if so why should we change the Server config file if the problem is with one application Cal Script. Please guide me how to proceed.
Regards,
NaveenYour calculation needs to hold more blocks in memory than your current set up allows.
From the docs (quoting so I don't have to write it, not to be a smarta***:
CALCLOCKBLOCK specifies the number of blocks that can be fixed at each level of the SET LOCKBLOCK HIGH | DEFAULT | LOW calculation script command.
When a block is calculated, Essbase fixes (gets addressability to) the block along with the blocks containing its children. Essbase calculates the block and then releases it along with the blocks containing its children. By default, Essbase allows up to 100 blocks to be fixed concurrently when calculating a block. This is sufficient for most database calculations. However, you may want to set a number higher than 100 if you are consolidating very large numbers of children in a formula calculation. This ensures that Essbase can fix all the required blocks when calculating a data block and that performance will not be impaired.
Example
If the essbase.cfg file contains the following settings:
CALCLOCKBLOCKHIGH 500 CALCLOCKBLOCKDEFAULT 200 CALCLOCKBLOCKLOW 50
then you can use the following SET LOCKBLOCK setting commands in a calculation script:
SET LOCKBLOCK HIGH;
means that Essbase can fix up to 500 data blocks when calculating one block.
Support doc is saying to change your config file so those settings can be made available for any calc script to use.
On a side note, if this was working previously and now isn't then it is worth investigating if this is simply due to standard growth or a recent change that has made an unexpected significant impact. -
Hello,
We have following Problem:
We send an XML-Request with HTTP-Adapter to XI and get Data from R/3, works fine.
But when we send a Second Request we become an Error.
The error comes because in the Java Runtime the XI writes wrong values into Message.
When we do a XI Data Cache Refresh for INTEGRATION_SERVER
and INTEGRATION_RUNTIME we can send a message and all works fine again.´
Any Idea why the XI Caches Data from Request and set this values in the message of request that was send later?
Thanks,
RobinHi,
I think both are same. Because in SXi_ADM we also define our IS. so i think it may be same ...
If I am wrong please share your knowledge . in this thread for more clarification ..
Regards,
Amit -
Error in Starting Active Data Cache
Hi All,
I am trying to start the BAM services, all other services are getting started except 'Active Data Cache'.
Its erroring out with the following msg in the log....
Could any one look in to this issue......Thanks in Advance.
here is the log msg
2009-01-16 15:56:56,538 [10688] ERROR - ActiveDataCache DPAPI was unable to decrypt data. CryptUnprotectData failed. Error -2146893813: Key not valid for use in specified state.
2009-01-16 15:56:56,538 [10688] WARN - ActiveDataCache Exception occurred in method Startup
Stack trace:
at Oracle.BAM.Common.Security.DataProtector.DPAPI.Decrypt(Byte[] cipherTextBytes, Byte[] entropyBytes, String& description)
at Oracle.BAM.Common.Security.DataProtector.DPAPI.Decrypt(String cipherText, String entropy, String& description)
at Oracle.BAM.Common.Security.DataProtector.DPAPI.Decrypt(String cipherText)
at Oracle.BAM.Common.Security.DataProtector.DataProtector.Decrypt(String strData)
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.ConnectionStringDecrypter.Decrypt(String strEncrypted)
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleDataFactory.GetInstance()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.GetDataFactory()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.GetServerVersion()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.Startup(IDictionary oParameters)
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.Startup()
2009-01-16 15:56:56,553 [10688] ERROR - ActiveDataCache The Oracle BAM Active Data Cache service failed to start. Oracle.BAM.ActiveDataCache.Common.Exceptions.CacheException: ADC Server exception in Startup(). ---> System.Exception: DPAPI was unable to decrypt data. CryptUnprotectData failed. Error -2146893813: Key not valid for use in specified state.
at Oracle.BAM.Common.Security.DataProtector.DPAPI.Decrypt(Byte[] cipherTextBytes, Byte[] entropyBytes, String& description)
at Oracle.BAM.Common.Security.DataProtector.DPAPI.Decrypt(String cipherText, String entropy, String& description)
at Oracle.BAM.Common.Security.DataProtector.DPAPI.Decrypt(String cipherText)
at Oracle.BAM.Common.Security.DataProtector.DataProtector.Decrypt(String strData)
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.ConnectionStringDecrypter.Decrypt(String strEncrypted)
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleDataFactory.GetInstance()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.GetDataFactory()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.GetServerVersion()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.Startup(IDictionary oParameters)
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.Startup()
--- End of inner exception stack trace ---
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.Startup()
at Oracle.BAM.ActiveDataCache.Kernel.Server.Server.Startup()
at Oracle.BAM.ActiveDataCache.Service.DataServer.Run()Hi.
I encountered the same problem. In my case, the reason was that I created a new user for BAM (to be provided when installing BAM) but ran the installation under another user account. It seems like these users must be the same to make it work.
Greetings,
cor -
Hi Experts,
Im new in this forum and please tell me if Im in the wrong Forum.
I think the problem Im facing is a data cache one.
The Scenario is a proxy -> Web Sevice. Synchronous.
The Symptoms are: problems in the ESR. when im testing my scenario I get diferent errors depending on the refresh of the cache.
If I refresh the cache in the ABAP stack transaction sxi_cache. the error showed is: Operation Mapping XXXXXXXXX Runtime error Mapping program is not available in runtime cache
If I refresh the cache in the JAVA stack in the administration tool the error showed is: Receiver Determination Runtime error Error while refreshing the XI runtime cache
I never faced this before and cant find it in any other posts.
Thanks in advance and I hope you can help me.
Agus.Hi Edgarzino,
Please take a look at this guides, they hace useful topics:
´´´´ How to handle caches in XI
(NW 2004, XI 3.0)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
(NW 2004s, PI 7.0)
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0332b2a-eb97-2910-b6ba-dbe52a01be34 -
ADC exception=BAM-01262: Active Data Cache server exception in openViewset
Hi All,
I am getting the below mentioned error when i try to open a report from Active Studio in BAM.
If i give parameter value ' All ' in the prompt, it shows all the value. But if i give specific values like one parameter value 1007 and other All etc, it gives the below error. I tried giving parameter value ' All ' in the prompt after getting the error, its not showing the values.
The below error is from front end:-
SQL EXCEPTION NULL : Invalid column index
The below error from back end:-
[2012-01-10T06:39:07.916+05:30] [bam_server1] [ERROR] [] [oracle.bam.reportcache] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 83cdf926093045b8:4fde7fa7:134bf505061:-8000-00000000000044f4,0] [APP: oracle-bam#11.1.1] *ReportCache: ReportCacheServer.OpenViewSet: ADC exception=BAM-01262: Active Data Cache server exception in openViewset(). [[*
at oracle.bam.adc.kernel.util.Util.getCacheException(Util.java:101)
at oracle.bam.adc.kernel.util.Util.getCacheException(Util.java:154)
at oracle.bam.adc.kernel.util.Util.getCacheException(Util.java:172)
at oracle.bam.adc.kernel.server.DataStoreServer.openViewset(DataStoreServer.java:1110)
at oracle.bam.adc.ejb.BamAdcServerBean.openViewset(BamAdcServerBean.java:841)
at sun.reflect.GeneratedMethodAccessor702.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.jee.intercept.MethodInvocationInvocationContext.proceed(MethodInvocationInvocationContext.java:104)
at oracle.bam.adc.ejb.BamAdcServerBean.interceptor(BamAdcServerBean.java:266)
at sun.reflect.GeneratedMethodAccessor374.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
[2012-01-10T06:39:07.913+05:30] [bam_server1] [ERROR] [] [oracle.bam.adc] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 83cdf926093045b8:4fde7fa7:134bf505061:-8000-00000000000044f4,0] [APP: oracle-bam#11.1.1] ActiveDataCache: Exception occurred in method openViewset(_TPT_PO_HEADER_STG_TBL,0)[[
Exception: java.sql.SQLException: SQLError(17003) SQLState(99999) Invalid column index
at oracle.jdbc.driver.OraclePreparedStatement.setStringInternal(OraclePreparedStatement.java:6336)
at oracle.jdbc.driver.OraclePreparedStatement.setObjectCritical(OraclePreparedStatement.java:10605)
at oracle.jdbc.driver.OraclePreparedStatement.setObjectInternal(OraclePreparedStatement.java:10518)
at oracle.jdbc.driver.OraclePreparedStatement.setObjectInternal(OraclePreparedStatement.java:11574)
at oracle.jdbc.driver.OraclePreparedStatement.setObject(OraclePreparedStatement.java:11544)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.setObject(OraclePreparedStatementWrapper.java:249)
at oracle.bam.adc.common.externaldatasources.JDBC.getDataReader(JDBC.java:322)
at oracle.bam.adc.kernel.datasets.ExternalStorageEngine.getDataReader(ExternalStorageEngine.java:76)
at oracle.bam.adc.kernel.viewsets.utilities.externaldata.DataImporter.executeQuery(DataImporter.java:95)
at oracle.bam.adc.kernel.viewsets.utilities.externaldata.ExternalDataManager.importExternalData(ExternalDataManager.java:228)
at oracle.bam.adc.kernel.viewsets.utilities.externaldata.ExternalDataManager.importExternalFactData(ExternalDataManager.java:151)
at oracle.bam.adc.kernel.viewsets.utilities.externaldata.ExternalDataManager.getExternalData(ExternalDataManager.java:103)
at oracle.bam.adc.kernel.viewsets.Viewset.loadData(Viewset.java:259)
at oracle.bam.adc.kernel.viewsets.ViewsetBase.initialize(ViewsetBase.java:171)
at oracle.bam.adc.kernel.viewsets.Viewset.initialize(Viewset.java:220)
at oracle.bam.adc.kernel.viewsets.ViewsetBase.open(ViewsetBase.java:154)
Please give me any suggestion on this.
Thanks,
ManikandanThis problem was solved when I installed a new product version.
-
Error while Enabling Active Data Cache Clustering Services: error 1753
I have installed the Oracle BAM with Enterprise link.All the installation was successful.But while Enabling Active Data Cache Clustering Services using the following command:
cluster.exe restype "Oracle Business Activity Monitoring Active Data Cache" /create /dll:"C:\OracleBAM\ADCClusterResourceType.dll"
i am getting the folllowing error:
System error 1753 has occurred.
There are no more endpoints available from the endpoint mapper.
Although i stopped the Active Data Cache Service..?
I am unable to resolve it
Kindly help me out
Ramesh NambalaHi.
I encountered the same problem. In my case, the reason was that I created a new user for BAM (to be provided when installing BAM) but ran the installation under another user account. It seems like these users must be the same to make it work.
Greetings,
cor -
BAM Report and Active data cache
I am having problems with reports that have automatic active data retrieval.
It does not work.
If I load the report it extracts the data correctly from an external data source. If I Reprompt or refresh it brings back changed data from the data source.
It does not automatically poll for changes even though it is set in the report properties.
If I stop and start the Active data cache service it starts polling and reconnecting, but not resynching the data.
In the Active data cache log I have the following entries :
2005-12-01 09:36:54,062 [3576] ERROR - ActiveDataCache Viewset not found:
2005-12-01 09:36:54,078 [3576] WARN - ActiveDataCache Exception occurred in method GetChangeList
Stack trace:
at Oracle.BAM.ActiveDataCache.Kernel.Viewsets.ViewsetManager.GetViewset(String strViewsetID)
at Oracle.BAM.ActiveDataCache.Kernel.Viewsets.ViewsetManager.GetChangeList(String strViewsetID, Int32 iTimeout)
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.GetChangeList(String strViewsetID, Int32 iTimeout)
Has anyone any ideas on what the problem is ?
ThanksSriram
Can you identify your company and project.?
a) Maximum capacity of ADC == maximum capacity of your underlying Oracle DB used by BAM as repository.
b) Retention period - infinite - data is there in BAM ADC (also in BAM repository) till you manually delete it (there is no automatic delete of old data)
c) Yes ADC stores its data internally in the Oracle database (aka BAM repository)
d) No - we generally donot publish ADC internals. This is a known decision since end users will only work either to put data into ADC or plot reports/dashboards from BAM GUI. You have to be very specific on what your are trying to acheive and we can suggest possible alternates.
Maybe you are looking for
-
MMy wife had bought an iPad from a friend. My wife already has an iPhone, which is registered to iCloud. She cannot acces iCloud from the new iPad. It says her username and password is not authorised. What do we need to do.
-
Hello, in my business workflow I manage billing plans with down payments. I would like to know what is the right procedure, if there is one, to manage the following process: - I have a billing plan for 1000 u20AC: a down payment request for 200 u20
-
Can a non-iPhone stream to Apple TV?
Just as the headline states, wondering if a non-iPhone, such as the HTC One or Nexus 4 would be able to stream video content to Apple TV? Disappointed with iOS7 so I'm considering switching to HTC One or perhaps the upcoming Nexus 5, and want to see
-
I want to know about enterprise soa and sap netweaver
Hi all, i am ABAP'r , i want to know about Enterprise SOA And SAP Netweaver , please send some documents about that . Thanks®ards. Naveen Kumar
-
Possible to install a new SSD to a 13-inch macbook pro with retina display
I just bought a 13-inch macbook pro with retina display last week from apple. I want to make this macbook a protable workstation, so I upgraded the RAM to 16G. I also purchased an Samsung 1T SSD 840 EVO, which is suggested from most of the web, but w