Data cancellation / roll back

Hi,
We have a scenario wherein SAP PI posts certain number say 10 Material Master Data to SAP from external system, so during process if first five materials out of 10 are posted and error appears for sixth material, then is it possible to cancel all previous 5 postings also.
Please suggest
Thanks in advance.

Divya,
Thanks that was very helpful.....that will definitely work if you are pushing data to SAP which is independant of each other.
But in our case, I will further explain our situation...
in our scenario we have to create 10 materials say A1,A2 .... A10 , and 2 Boms say A9 and A10
A9 BOM contains items A1,A2..A6
and A10 BOM contains items A7,A8,A9
Now when i trigger upload say 10 materials are created, then BOM for A9 is also created
but if while creating BOM for A10 some error happens, so in that scenario requirement is all 10 materials and BOM for A9 which was created should be rolled back/removed from system.
Please suggest
Thanks in advance

Similar Messages

Can a Rejection in an Approval Step roll back the data from table

Hi All
We are using the BPC 7.5 MS Version SP 4 for Quantity & Sales Planning.
The main drive dimenion is the Material Dimenion whiich is having almost 65000 member id's and increasing.
I have a situation where the a High Level Planner Input some quantity and it allocated down at Material Level.
When the Surbodinate Planner under the High Level Planner looking at the allocated value, he has the option to change the quantity.
But after he make the changes to quantity and send the data to the data base, the High Level Planner can accept the Change or Reject the change.
If the High Level Planner Reject the change, make by the Subordinate Planner, the Data will Roll Back to its original value, meaning the Data Submitted by Subordinate Planner will be deleted from the table and the earlier Value from the High Level Planner will show.
Is this kind of facility available in BPC 7.5 MS Version of Rolling Back the Data already comiited to the data base.
Looking forward to hear from you all on the same.
Regards
Krish

One idea will be that you have to insert the users like dimension into BPC. This will be probably the way how you have to design your application.
In this way probably you will be able to simulate this behaviour.
Any way I will come back to your request.
Why the roll back it wil help?
May be the reject is just for planning of one material why do we have to roll back everything planned for other materials?
Other idea for implementation is related to what means the approval and reject. Are we speaking about work status or are we speaking about another type of approval.
It is not a simple discussion. We have to speak about detailed reguirements and function by that it can be easy achieved this behavour requested.
Regards
Sorin Radulescu

Data Services job rolling back Inserts but not Deletes or Updates

I have a fairly simple CDC job that I'm trying to put together. My source table has a record type code of "I" for Inserts, "D" for deletes, "UB" for Update Before and "UP" for Update After. I use a Map_CDC_Operation transform to update the destination table based on those codes.
I am not using the Transaction Control feature (because it just throws an error when I use it)
My issue is as follows.
Let's say I have a set of 10,000 Insert records in my source table. Record number 4000 happens to be a duplicate of record number 1. The job will process the records in order starting with record 1 and begin happily inserting records into the destination table. Once it gets to record 4000 however it runs into a duplicate key issue and then my try/catch block catches the error and the dataflow will exit. All records that were inserted prior to the error will be rolled back in the destination.
But the same is not true for updates or deletes. If I have 10000 deletes and 1 insert in the middle that happens to be an insert of a duplicate key, any deletes processed before the insert will not be rolled back. This is also the case for updates.
And again, I am not using Transaction Control, so I'm not sure why the Inserts are being rolled back, but more curiously Updates and Deletes are not being rolled back. I'm not sure why there isn't a consistent result regardless of type of operation. Does anyone know what's going on here or what I'm doing wrong/what my misconception may be?
Environment information: both source and destination are SQL Server 2008 databases and the Data Services version we use is 14.1.1.460.
If you require more information, please let me know.

Hi Michael,
Thanks for your reply. Here are all the options on my source table:
My Rows per commit on the table is 10,000.
Delete data table before loading is not checked.
Column comparison - Compare by name
Number of loaders - 1
Use overflow file - No
Use input keys - Yes
Update key columns - No
Auto correct load - No
Include in transaction - No
The rest were set to Not Applicable.
How can I see the size of the commits for each opcode? If they are in fact different from my Rows per commit (10,000) that may solve my issue.
I'm new to Data Services so I'm not sure how I would implement my own transaction control logic using a control column and script. Is there a guide somewhere I can follow?
I can also try using the Auto correct load feature. I'm guessing "upsert" was a typo for insert? Where is that option?
Thank you very much!
Riley

Error message after downloading and install rolled back (using up data limit)

error message after completing install of trial. then program was rolled back. I do not appreciate using up data allotment unnecesarily, people.Thanks for any assistance.

Rhumsike which Adobe software or service are you trying to install? Also which operating system are you using? Finally what is the error message which you are receiving?

2.1 EA1: Unable to roll back changes in Data tab [fixed EA2]

Hi,
With "Post edits on row change" set, any changes made in a table's Data tab cannot be rolled back.
When trying to do so, the screen flashes briefly, which would indicate reloading, but the changes are still there. The tab's title is also still cursive and you're prompted to save the changes on closing the tab. When answering no, the tab is closed, but on reopening the changes are still there and sqldev doesn't recognize them anymore as posted!
The only way to get the original contents back is to exit and restart sqldev all together.
Please confirm and log as bug,
K.

1. Have post-on-row-changes ON. Set-Auto-commit-ON OFF
2. Update data in a cell, tab to the next row, the change is posted (update stmt issued)
3. Hit rollback button. The data is brought back to "original".
But the grid editor is shown dirty (the tab name is cursive) - this is the bug.
But I don't have a problem seeing the "original" data after rollback.
Plz validate.
-Raghu

HT201413 install rolls back and cancels

I cannot get Itunes to install. It tries to install but rolls back and cancels. I have deleted ny old version of i-tunes but still cannot install any version.

When I install itunes on my XP sp3 system I get a network error while reading from itunes.msi.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

HT203128 iTunes 12.1.050 - Rollback: Updated from 12.01, now I cant't change track numbers and add additional data fields. How can I roll back to the previous version? @Apple, I want a $100 gift card for the inconvenience.

iTunes 12.1.050 - Rollback: Updated from 12.01, now I cant't change track numbers and add additional data fields. How can I roll back to the previous version? @Apple, I want a $100 gift card for the inconvenience.
- it's all said in the title. I can't understand why the developers turn things bad ... risking loosing Apples valuable customers.
More examples needed? (check out the communities and the reviews)
- OSX: Maverick to Yosemite = not recommended (check it out > http://roaringapps.com/apps)
- iPad: older versions as iPad2 should not upgrade to iOS7/8 (it's not supporting its hardware accordingly, it's designed for the latest hardware)
- iTunes (it's possible to rollback to 10.7 - 11.4, but you need to breech OSX system security framework)
- Pages (was a real alternative for many of us, each update reduced features and created incompatibility to older work files)
The list could easily extend to ...

You can offer Apple feedback here: http://www.apple.com/feedback/
as for "
"@Apple, I want a $100 gift card for the inconvenience"
dream on.

My Ipod Classic (160G) no longer synchs completely with iTunes (93G). Have reset and restored to no avail. AM about to try roll back to a previous version of iTunes, which has been on auto update.

My iPod Classic (160G) used to sync flawlessly with iTunes (93G).
Recently, there seem to be fewer folders syncing. In particular, it is not syncing more recent adds. It also occassionally refuses to sync at least one mp3 downloaded from Amazon.com, giving an unable to sync message with an error code or 50.
I'm running iTunes version 10.7, and the software (2.04) on myiPod is current.
I only use the iPod for music. I have only one playlist.
Reset and restore did not fix the problem; I'm considering rolling back to a previous version of iTunes. Are there any other ideas to consider?
Please advise.
Thanks,
R

giving an unable to sync message with an error code or 50
See this older thread for some possible solutions.
https://discussions.apple.com/thread/3924425?tstart=0
iTunes and its sync process with your iPod have been know to choke once the amount of data that needs to be transferred, replaced, or updated, reaches a certain size limit in GBs.
B-rock

Rolling back of Quick Pay Pre-payment and Quick Pay in case of void cheque

Hi All
I am facing an issue if you can help me out of if
Here is a scenario
a payroll manager runs the following processes.
1. Payroll run
2. Pre-Payments
3. Payroll Archiver
4. Payment Output file
After running all these process payroll manager finds that he also has to make an adhoc payment on account of car loan of AED 150,000.
So he runs following processes
1. Quick pay for Car loan
2. Quick pay pre-payments (payment made through check)
3. payroll archiver
4. Cheque Writer.
Now due to some technical fault, alignment on printing of cheque becomes disturbed there for cheque misprinted.
Payroll manager runs Void Cheque process to cancel the cheque.
After all these processes which has run successfully, order comes from upper management to rollback quickpay for adhoc payment of loan.
Now question is how it can be achieved.
I tried different things as follows
On Assignment Process results screen i queried the assignment which all the processes in descending order.
I tried to start roll back from cheque writer but system didn't allowed to do this because of check Void process.
I tried to start rollback from Magnetic report, system allowed to roll it back.
Then i tried to rollback Quick-pay prepayment, system did not allow me be do it. There fore i couldn't run rollback for Quick-pay.
There is an another thing i tried.
On "Assignment Process Result" screen i queried assignment. Then i delete the first entry of Void cheque by using delete option from menu bar on top and saved the record. then i delete cheque writer entry and saved the record. Then i run rollback for quick pay pre-payments and ran it successfully and then lastly i ran rollback for quick pay run.
One thing cautioned me that if I delete the void cheque entry then its history may be lost or have lost and on the other hand with out deleting void cheque i cannot proceed to rollback quick pay.
Kindly tell me the best way to run rollback for quick pay in this situation.
Regards
Majid

Bt do not provide broadband only so you need existing account holder to add broadband to phone account and then you can pay back the account holder - probably not what you want
the 12 months advance applies to the line rental not the broadband - as I said BT do not sell broadband only you buy a package which includes phone
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Time Machine miscalculates the amount of data to be backed up, and fails.

Hi.
Situation: After many successful backups, Time Machine spontaneously states that it requires tens of GB more space on the backup volume than the size of the data to be backed up. Total required space exceeds physical size of backup volume, despite the fact that the partially filled source volume is the same physical size as the Time Machine volume.
*Attempted solutions*: Disk Utility check of both hard drives, re-formatting of Time Machine volume (GUID partition map, HFS+).
Hardware:
Name : TM volume
Partition Map Scheme : GUID Partition Table
Media Name : Seagate FreeAgentDesktop Media
Location : External
Total Capacity : 298.1 GB (320,072,933,376 Bytes)
Name : Source Volume
Partition Map Scheme : GUID Partition Table
Media Name : Hitachi HTS543232L9A300 Media
Location : Internal
Total Capacity : 298.1 GB (320,072,933,376 Bytes)
S.M.A.R.T. Status : Verified
Background: After a long spell of no backups, and many new items on the source volume, I formatted the TM volume. I then elected to exclude "System files and applications". The process of calculating the size of the excluded files never completed, even after hours of calculation. I cancelled this option, and selected the directories to exclude manually. I initiated a backup.
This setup worked for a few weeks. A day or two ago, I was told that TM did not have enough space on the backup volume. This was strange, since the size to be backed up reported in the "Options" panel was less than the total size of the TM volume by a large margin.
I formatted the external TM drive again, selected the drive, and initiated a backup.
TM failed, stating that it required 319.0 GB for the backup, but that 297.6 were available on the backup volume. However, there are about 295 GB of used data on the source volume, and the Options panel showed that an amount several tens of GB less than this was to be backed up (about 265.9 GB).
Feb 1 15:51:19 koishi /System/Library/CoreServices/backupd[7388]: Backup content size: 292.1 GB excluded items size: 26.3 GB for volume koishi
Feb 1 15:51:19 koishi /System/Library/CoreServices/backupd[7388]: Starting pre-backup thinning: 318.93 GB requested (including padding), 297.64 GB available
Feb 1 15:51:19 koishi /System/Library/CoreServices/backupd[7388]: No expired backups exist - deleting oldest backups to make room
Feb 1 15:51:19 koishi /System/Library/CoreServices/backupd[7388]: Error: backup disk is full - all 0 possible backups were removed, but space is still needed.
Feb 1 15:51:19 koishi /System/Library/CoreServices/backupd[7388]: Backup Failed: unable to free 318.93 GB needed space
Feb 1 15:51:24 koishi /System/Library/CoreServices/backupd[7388]: Backup failed with error: Not enough available disk space on the target volume.
I then opened the Options panel, cleared my manually added files, selected the automatic option of "System Files and Applications", and predictably, it did nothing for a long time.
The console said:
Feb 1 16:04:41 koishi FindSystemFiles[7632]: Querying receipt database for system packages
Feb 1 16:04:41 koishi [0x0-0x1af1af].com.apple.systempreferences[7500]: 2009-02-01 16:04:41.567 FindSystemFiles[7632:613] Querying receipt database for system packages
Feb 1 16:04:45 koishi FindSystemFiles[7632]: Finding system files...
Feb 1 16:04:45 koishi [0x0-0x1af1af].com.apple.systempreferences[7500]: 2009-02-01 16:04:45.021 FindSystemFiles[7632:613] Finding system files...
Feb 1 16:04:47 koishi FindSystemFiles[7632]: FSOpenIterator failed
Feb 1 16:04:47 koishi [0x0-0x1af1af].com.apple.systempreferences[7500]: 2009-02-01 16:04:47.979 FindSystemFiles[7632:613] FSOpenIterator failed
Feb 1 16:13:09 koishi FindSystemFiles[7632]: FSOpenIterator failed
Feb 1 16:13:09 koishi [0x0-0x1af1af].com.apple.systempreferences[7500]: 2009-02-01 16:13:09.271 FindSystemFiles[7632:613] FSOpenIterator failed
Feb 1 16:13:19 koishi FindSystemFiles[7632]: FSOpenIterator failed
Feb 1 16:13:19 koishi [0x0-0x1af1af].com.apple.systempreferences[7500]: 2009-02-01 16:13:19.278 FindSystemFiles[7632:613] FSOpenIterator failed
Feb 1 16:13:29 koishi FindSystemFiles[7632]: FSOpenIterator failed
Feb 1 16:13:29 koishi [0x0-0x1af1af].com.apple.systempreferences[7500]: 2009-02-01 16:13:29.281 FindSystemFiles[7632:613] FSOpenIterator failed
So I hit cancel to return to the manually selected files list, had another go at backing up, and it failed.
Any ideas?
d.

It has failed. It says it requires 318 GB of space, which is ludicrous.
Feb 1 17:02:25 koishi /System/Library/CoreServices/backupd[7799]: Backup requested by user
Feb 1 17:02:25 koishi /System/Library/CoreServices/backupd[7799]: Starting standard backup
Feb 1 17:02:25 koishi /System/Library/CoreServices/backupd[7799]: Backing up to: /Volumes/kuhi/Backups.backupdb
Feb 1 17:02:25 koishi /System/Library/CoreServices/backupd[7799]: Ownership is disabled on the backup destination volume. Enabling.
Feb 1 17:02:25 koishi KernelEventAgent[37]: tid 00000000 received unknown event (256)
Feb 1 17:02:26 koishi /System/Library/CoreServices/backupd[7799]: Event store UUIDs don't match for volume: koishi
Feb 1 17:05:20 koishi login[7705]: DEAD_PROCESS: 7705 ttys001
Feb 1 17:07:49 koishi /System/Library/CoreServices/backupd[7799]: Backup content size: 292.1 GB excluded items size: 26.4 GB for volume koishi
Feb 1 17:07:49 koishi /System/Library/CoreServices/backupd[7799]: Starting pre-backup thinning: 318.79 GB requested (including padding), 297.64 GB available
Feb 1 17:07:49 koishi /System/Library/CoreServices/backupd[7799]: No expired backups exist - deleting oldest backups to make room
Feb 1 17:07:49 koishi /System/Library/CoreServices/backupd[7799]: Error: backup disk is full - all 0 possible backups were removed, but space is still needed.
Feb 1 17:07:49 koishi /System/Library/CoreServices/backupd[7799]: Backup Failed: unable to free 318.79 GB needed space
Feb 1 17:07:54 koishi /System/Library/CoreServices/backupd[7799]: Backup failed with error: Not enough available disk space on the target volume.
I will now force a Spotlight re-indexing of my source drive.
d.

How Can I Roll Back my iTunes Library?

I'm guessing it may no tbe possible at all, but here goes.
What I would like to do with my music estate is roll back my current iTunes library file, automatically updated to iTunes 11 when updated on MPBr when this was my only PC using iTunes. Now I have three and some iOS devices too. My library has been moved from windows machines to macs and is several years old and has received 100s of hours of tweaking to get it just right.
Now my server is a PowerPC mac and I can only go as far as iTunes 10.6.xx, I want this to be always on and share the library with other PCs accross home sharing (i will sync iPhones over the wi-fi with this PC too, though it may not play with iOS7, so perhaps not).
I want to see the iTunes library on the macbooks, probably through Home Sharing, I also want to be able to sync the iphones, but only have a single copy of the music files on the server. is this possible? This will just be for when out of the house as I can also use home sharing in the house for music.
Thanks

You say you want to do this with multiple devices. Let's say you have a new iPhone 5 that requires iTunes 11. You will not be able to sync that if your base iTunes is iTunes 10.6 since your hardware will require at least whatever version of iTunes was current at the time of purchase. You're seeing this with your iOS7 phone. Anyway, unless all your hardware is old enough to use the lowest version of iTunes you need to run, you may be out of luck. You cannot share the library. Sharing media is different, and relatively easy, but it will be complex to ensure all the multiple libraries are kept up to date.
You also can't roll back iTunes libraries to earlier versions unless you kept a backup of your library from the point to which you wish to revert, or it is still in the previous libraries folder.

Regarding DB adapter transactions roll back

Hi All,
In a BPEL, using while loop i'm trying to insert records in a table(business table-Oracle XE DB). If any errors happen during the insertion, it should rollback the previous insertions happened in the business table and insert the error details in the log table.
Example: Let's say 5 records need to be inserted in business table, after first two records get inserted successfully, due to invalid data, 3rd record fails to get inserted.
Things i have done,
1) I have a catch block to catch the errors
2) I have an invoke activity in the catch block to invoke the DB adapter to insert error details in log table.
3) Throw activity with bpelx:rollback to roll back the previous transactions.
Question: After the error details get inserted in log table, since i have a throw activity with bpelx rollback, all the previous DB transactions including the log table insertion is getting rolled back. I don't want my log table record insertion to be rolled back, only the records which i have already inserted successfully in the business table needs to be rolled back.
Can anyone let me know, how to handle such a situation? your response is greatly appreciated.

You need to ensure that your process is working in a single transaction.
You are correctly using the XA datasource.
Next you need to ensure that you do not have a dehydration point in the process and if there is a call to another BPEL process they are in a same transaction.

Roll back to itunes 10.7 from itunes 11

Recently my iMac updated to iTunes 11 automatically as part of its update process. I find that I hate this new version of iTunes and so I tried to roll back to the previous version (10.7 in my case). I figured out how to uninstall / delete iTunes 11, I downloaded the previous version from apple.com and ran the installer. I restored my previous iTunes Library file and openned iTunes. All my playlists, play counts, etc are there appropriately and everything looks good at first glance. However, my iPod and iPad can no longer sync and iTunes is telling me to restore them both to factory settings which I'd rather not do. I also can no longer connect to my iTunes library via my local area network from my Windows based machines (haven't been able to try from another Mac, yet). Any ideas on what I did wrong and more importantly how to fix these annoying problems? Thanks!

Thanks. This may work for the iPod and iPad although I'm not terribly interested in reorganizing all the apps and data on both devices unless absolutely necessary. Also, this does not address the problem of not being able to access the library over the LAN from other computers running iTunes.

Desperate for easy way to roll back 5.1 firmware to a previous version?

The company I work for uses a proprietary iPod Touch app for data management. I have a 3rd gen iPod Touch that I updated to firmware 5.1. I don't think many people in the company keep up with firmware updates like I do. However that may now be to their advantage because we had an app software update about the time the firmware update happened and my app no longer works like it should - I am one of very few employees, nation wide, that has this problem. I think it has to do with an incompatability of the app software and the 5.1 firmware. I really need to be able to use the app to it's fullest capacity. Its been weeks and the company hasn't fixed the problem so I'm seeking answers of my own.
Is there a simple way to roll back the firmwareto 5.0 or before the cloud software came out (I don't know what version that would be)??? or is it permanent?
I use a Microsoft based notebook for my iPod/iTunes managment so answers gear to a Mac won't necessarily make sense to me.
Thank you!!

"apple" doesnt support downgrade of any software..but there are other ways to do it..u know wat i mean rite

After lollypop upgrade I can no longer transfer files from LG g3 to windows8 computer using USB charge cord. Can I roll back to Kittcat?

After lollypop upgrade I can no longer transfer files from LGg3 to windows8 computer using USB charge cord. Can I roll back to Kittcat?

That is definitely odd, grantcool. Let's help restore this important data transfer feature. To confirm, when you connect the USB cable to your phone and computer > Pull down the Notification Bar > Select USB Connected > Can you choose Media Sync (MTP) ?
NicandroN_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Data cancellation / roll back

Similar Messages

Maybe you are looking for