Data card that supports mac 10.8.2

hii...i am from india..i need information about data card that supports mac 10.8.2

RAJSHEKAR MANDADI wrote:
whats the solution for my problem?
Google it or wait for someone that knows to answer.

Similar Messages

Need a Esata or USB 3.0 PCI-E card that supports Server 2012. ANY card.

I can't find any card that supports Server 2012 yet, but I really need to transfer and move 2-3TB of data on a weekly basis. USB 2.0 + external drive is too slow. Any other solutions I'm over looking?
I'd like to get a Esata 6ghz and a few Esata Externals. USB 3.0 is an option if I can't find Esata, although It's slower than I'd like.
I'm open to any ideas.

I ended up getting two of these:
http://www.newegg.com/Product/Product.aspx?Item=N82E16815201051
Below is the review I wrote on newegg.com about the product.
Pros: Contacted Koutech (and 5 other companies) asking what eSATA and USB 3.0 cards they had that would work in Windows Server 2012. A support tech responded that same day. Every other company still hasn't responded 2 months later. The rep said
he hasn't tested any of their cards in Server 2012, but he would start testing and give me a product list in 2 days.
He did exactly that. In less than 2 days I had a list of 18 different PCI-E cards that worked in Server 2012.
I ordered two of these cards (PEU437) for my Dell Servers (T620, & T710).
I have installed the card in the T620 Server, and the card did require the 15 pin SATA power cable in order to work properly (Instructions make it sound optional). My server didn't have any extra 15 pin SATA power cables, I had to buy a 15 pin SATA extension
cable and daisy chain off the SATA CD-ROM drive, but it works just fine.
I'm transferring at speeds over 170mb/s (which is the fastest I've seen on usb 3.0 thus far) My M18X, and MacBook Pro usb 3.0 seem to cap around 100mb/s. I'm going to attribute the extra speed to the ridiculous raid set up, and H710 controller card as I've
done file replication well over 1gb/s.
All in all, the product is working exactly as described, and tech support was amazing from Koutech.
I will definitely purchase future PCI-E cards from them.
And of course NewEgg pricing and delivery speed was top notch.
Cons: Directions were slightly misleading. I interpreted them as saying the 15 pin SATA power connection were "optional" for USB drives that didn't have their own power source.
Windows Server 2012 did see the PCI-E card with out the 15 pin SATA power connection hooked up, but it wouldn't acknowledge any USB External HDD, even if it had it's own power source.
In most cases this isn't an issue, desktop workstations usually have an abundance of 15 pin SATA power sources... however my Servers didn't have any. I had to daisy chain off of my SATA DVD-ROM drive. The Cable wasn't long enough, so a 12" extension cables
was needed, which I got off newegg for under 9 dollars each.
Minor issue, and acceptable. Directions should be more clear, but that's a technology limitation not a design flaw.
Other Thoughts: I did a Bare Metal Server Backup of slightly over 1TB of data in 1 hour and 42 minutes. A vast improvement over USB 2.0.

Iscsi TOE... does it worthwhile to get network card that support it ?

Hi all,
I was wondering if purchasing an ethernet card that support iscsi & TOE will improve performance ?
Does the linux kernel for OVM 2.1.5 support ethernet cards with these features ?
If anyone is using successfuly iscsi ethernet cards with OVM, can you share your experience with us ?
Cheers,
Roye

At least three to five business days before you see a credit.

Please tell me Card that support for Java Card 2.2.2

Hi Friends..
Please tell me Card that support for Java Card 2.2.2..
Thanks in advance..

Hi Sebastien_Lorquet..
Firstly, i'm so sorry if i'm mistaken and wrong.. i'm not mean to make you angry.. :(
sorry about this..
Yes, i've searched on google... and i think i'll buy it at NXP..
Thanks in advance Sir.. :)

Can I use a D-Link DWM 156 data card on a Mac Book Air? Do I need Windows 7software?

I've tried to use D-Link's data card with MacBook Air. It doesn't recognize it, although the makers insist it does. No one can tell me how to configurate it.I read I might need to have Windows 7?

Use file sharing
Mac Basics: File Sharing - Apple Support
You can also setup screen sharing on the Mini so once you set up the Mini with mouse, KB and monitor yo no lnoger need a a mouse, KB and monitopr on the Mini
http://osxdaily.com/2012/10/10/remote-control-mac-screen-sharing-os-x/

G4 867 DP (MDD) & G4 350 (AGP): PCI USB Card that Supports Deep Sleep?

I am working on upgrading a couple of G4s and wanted to see if I could install a PCI USB 2 expansion card with multiple external ports in both (4 if possible). I'd like to use the same card in both G4s if possible. Both will be running 10.4.11 & 9.2.2. I'd like the card to support Classic if at all possible.
I looked on OWC and first found the Sonnet Allegro; however, its product page notes it does support Deep Sleep so that is out:
http://eshop.macsales.com/item/Sonnet%20Technology/USB2/
Then I found the IOGEAR Hi-Speed USB 2.0 PCI Card and thought I was good to go as OWC does not list any Sleep issues; however, after checking elsewhere (Amazon and other sites) this card has similar G4 Sleep issues.
http://eshop.macsales.com/item/IOGear/GIC251U/
So where, oh where have all the suitable cards gone?

I’ve did some searching on Google/Google Shopping, Buy.com, Amazon, eBay, & OWC and I present my results as it may help others save time. The most plentiful cards still available appear to be the Belkin, the two IOGear units, and the BAFO.
Looks like I’ll try the IOGear GIC250U first.
Adaptec 3100LP:
PDF manual says support only to 10.1.1 and it says that the driver will disable the deep sleep option on your Mac, requiring you to uninstall the driver file if you want sleep back.
BAFO BF-460:
Manufacturer says Windows only. A buy.com listing says Windows & Mac support but no other details. A Amazon listing says it supports “wake-up” function, but does not say what platform.
Belkin F5U220:
Manufacturer says 10.2.7 or above for “F5U220V1”. Some sellers list cards as F5U220BHP or simply F5U220 so make sure it has “V1” on the end. One Amazon feedback said it has sleep issues with G5 while another said it worked good with a G4. Negative Mac feedback on http://www.xlr8yourmac.com/firewire/fwusb_card_deepsleep.html
GWC UC-160:
Can’t find much information and could not find it for sale.
IOGear GIC250U:
Manufacturer says it will work at 1.1 speeds with 8.6+ and 2.0 speeds with X. Feedback at http://www.xlr8yourmac.com/firewire/fwusb_card_deepsleep.html said it did not work with G4 400 running 10.2.6 with drivers; did work with G4/350 AGP machine & Dual G4/533 Digital Audio.
IOGear GIC251U:
Manufacturer says it will work with Mac X 10.3.9 to 10.5. LOL, diagram manufacturer has shows external hard drive connections as one example of devices you can connect (a big no, no according to advice here). Amazon feedback said has sleep issues with 10.4.2 on G4; with a G4 QuickSilver 2002 it only worked in the PCI slot next to graphics card; it worked great in a G4 Digital Audio; G4 Quicksilver running 10.4.8 works great; works great in unknown Mac running 10.3.8; never worked on a 1Ghz Mirrored Door PowerPc with any version of X from 10.3 to 10.4.9; froze computer and fried nearby pci card in a QuickSilver G4; a dual 450 G4 has sleep issues.
Keyspan U2PCI-5:
Can’t find much information and could not find it for sale.
O'toLink U2-C2A, U2-C2B, U2-P20N & U2-P50:
Can’t find much information and could not find it for sale.
Ratoc PCIU5:
Manufacturer says Windows only & discontinued.
Syba SD-LP-NEC4U:
Manufacturer site says Windows only.
USBWholesale UII-PCIP:
Seems to be listed under company named BusLink instead. A single Amazon listing says Windows only.

Getting a video card that supports extended desktop mode: AGP? PCI?

Hi guys and gals (and everything in between),
One of the reasons I got a Power Mac not so long ago was the convenience of using two or more displays at once, but then I discovered that the stock ATI Rage 128 in my Gigabit 450 (dual) does not support two displays. (I discovered it the hard way, when I connected a recently acquired Studio display to it, and my trusty CRT stopped getting a signal.)
I won't be using the computer for games, design or anything graphics intensive, mostly word processing (I'm a translator/editor/writer by trade), so I do not need the high end of the video card spectrum --just an AGP card that could allow me to work on extended desktop mode, preferably with an ADC connector. Would a Radeon 7500 suffice?
Or maybe a PCI card? I have read a lot in this forums against getting a PCI card, because of the 33 Mhz bottleneck, but wouldn't it work well enough for checking email and working on 2 or 3 documents at once?
Any help with this will be greatly appreciated!
Peace.
eMac, iMac, iBook, Power Mac Gigabit (running Tiger & 9.2.2) Mac OS X (10.3.9)

Thanks, PB PM.
I also did a little research in the forums and elsewhere (by the way, your posts have been really helpful to me, very knowledgeable and well-documented), and ended up buying a Radeon 7000 PCI for hooking up my VGA monitor, as a cheap solution to my problem.
Thanks again!
eMac, iMac, iBook, Power Mac Gigabit (running Tiger & 9.2.2) Mac OS X (10.3.9)

List of creative sound cards that support 5.1 ,older and new

Title says it all as I'm looking to purchase(new or used) creative 5. sound card. I'm unsure as to what older models support 5.,it's for a friend and I want to make sure he gets the right one.Li've,Audigy or other?I don't need one with all the bells and whistles just one that supports 5.. Thanks.

I'm afraid 11b is affected.
I have a D-Link DSL 604+ router, which is 11b only.
Wireless is very slow, I noticed it right away. I get the sawtooth readout in activity monitor's network section.
Also, after putting the iMac to sleep it cannot find my wifi network upon waking. I have to restart the system before it'll connect to my wifi network again.

Will FCP X and QT will output audio thru any sound card that the Mac recognizes?

I watch FCP X video on my Mac Pro video monitor.
I want to output the audio thru a sound card to my audio monitor controller. My new digital audio monitor controller connects USB to the Mac, and USB is not an output option with FCP X. So, I need another audio path.
I have previously used a Pro Tools HD Native card for sending FCP X audio out, and this works fine.
I assume that any other sound card that works in the Mac (i.e., compatible and selectible in Mac Pro Sound Preferences) would work with FCP X, but I am just checking to be sure this is right before I buy something.
I am aware of potential sync issues, so I would use only a low latency sound card. The Pro Tools card, for instance, had very low latency and worked fine.

OK, forget it.
I can just use the Mac Pro optical digital out. Doh.
Some days the brain just won't lock into gear.

What is a great video card that supports GPU acceleration?

A customer of mine wants to speed up his Adobe Lightroom 6 setup. He has various SSD's, and is ready to upgrade his graphics card to take advantage of the GPU acceleration found in LR 6. I was wondering if there was an up to date list of suggested, or sought after LR video cards?
Thanks!

On my system with an an i7-860 cpu and Nvidia Quadro 600 graphics card there's no benefit from LR CC GPU support. In fact when browsing image files in the Develop module there is an additional `1.5 to 2 sec. delay before the image becomes fully sharp. I suspect my i7 860 Quad Core processor is actually faster than my Quadro 600 GPU for updating the image previews, so I have it disabled. In addition there have been numerous reports form people with AMD GPU based graphics cards due to driver incompatibility.
My best suggestion is to get the highest performance Nvidia graphics card the customer can afford. If the customer also uses PS and a 30 bit (10 bit/color) monitor you will need an Nvidia Quadro model card. AMD FIrePro supports 30 bit color, but as mentioned many users currently have driver compatibility issues with LR CC. PassMark is a good site for benchmark comparison:
PassMark Software - Video Card (GPU) Benchmark Charts
If the card is strictly for speeding up LR CC I'd hold off for a while until the dust settles.

Are there any portable e. readers that support Mac software???

Does anyone know of any portable readers that work w/ Mac? For example, Sony makes a fantastic one but it only supports Windows! Open to any suggestions...thanks!!

There are many "readers" as you call them for different file formats listed on Versiontracker.
One included with some Macs, which you can download is Zinio's:
http://www.zinio.com/mac_splash
If you are talking about reading software for the blind, Mac OS X has built-in software in Apple menu -> System Preferences -> Universal Access for Text to Speech.

How do I get Software Upgrade for Printer that support MAC OS Lion

I have a new MacBook Air and a Brand New ENVY100 eAll In ONe Printer and the software provided does not support LION OS.
How can I upgrade the software for the printer?

If you mean upgrade the HP software for your Mac, get it here: http://support.apple.com/kb/DL907
If you mean firmware for your printer, enable Web Services then go to Setup > Preferences > Update Product.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

CDMAphone that supports Mac sync...

I live in Indonesia, somehow I find it difficult to find a CDMA cellphone that can be synchronized (at least address/phonebook) to a Mac computer. by iSync (with/without plugins) or any 3rd party software...
any suggestion on phone brand/type?
//preferably with miniUSB charging tho...

RAJSHEKAR MANDADI wrote:
whats the solution for my problem?
Google it or wait for someone that knows to answer.

Lan card that support server proliant

I have a HP ProLiant DL380pG8 server-107 and HP ProLiant DL380eG8-666,my question is : a10 Gb lan card support for these servers?Thank you

Hi:
You may also want to post your question on the HP Business Support Forum -- DL Servers section.
http://h30499.www3.hp.com/t5/ProLiant-Servers-ML-DL-SL/bd-p/itrc-264#.U4NRUelOW9I

Looking for data card‏

Dears
I have Wireless-G Router for Mobile Broadband from Linksys with these specifications
model number : WRT54G3G-EU
serial number : CKI11H110780
I am looking for data card that supported by this router
Here is five models of data cards from Option.com
http://www.option.com/products/overview.shtml
Which one of these five data cards models are supported by this linksys router ?
Specifically from these data cards
Waiting for your replay as soon as possible
Best Regards

UP UP UP

Data card that supports mac 10.8.2

Similar Messages

Maybe you are looking for