Data center design! What is ACE

Hi Everyone,
We are planning to have a datacenter. decided to buy 2 core 6500 series switches. what exactly is ACE? i understand it does loadbalancing. but then why wd not one use CSS instead on ACE. if we use ACE , can we eliminate the need of FWSM module. i read ACE has lots of security features. also it does web caching.. i may be wrong here.
So if we only have ACE in 6500, do we still need FWSM and some web caching engine (WASS). please also let me know some important features of ACE-Thanks

The ACE module is a loadbalancer that should eventually replace the CSS and CSM.
It comes with some firewall features but not all of them. Some users have enough FW features on the ACE module so they don't need the FWSM.
Others still need the FWSM.
Depends on what you need.
Finally, the ACE module does not come with caching option. Only the ACE Appliance - c4710 - has the caching and optimization features.
Gilles.

Similar Messages

Data Center Design

I am looking for a good article about data center design. I need some information about requirements for topics such temperature control, power, security, ventilation, etc.

The practice of System and Network administration is a great resource for the "other" things that make a data center successful.
http://www.amazon.com/gp/product/0321492668?ie=UTF8&tag=wwwcolinmcnam-20&linkCode=as2&camp=1789&creative=9325&creativeASIN=0321492668
Another great resource that you should reference is your local power company. PG&E for example will consult with you, and sometimes pay for upgrades to lower your power consumption.
Here is an article that talks about that in general -
http://www.colinmcnamara.com/2008/02/22/moving-towards-a-green-data-center-truth-behind-the-hype
If this is helpful please rate it
--Colin

Data center design guide

Hi all,
does anybody familiar with good design guide of Cisco data center design evolving nexus 2000, 5000 & 7000 with FCoE ?
thanks,

Hi all,does anybody familiar with good design guide of Cisco data center design evolving nexus 2000, 5000 & 7000 with FCoE ?thanks,
Hi ,
Check out the below link on Data center design with Nexus switches
http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9670/C07-572831-00_Dsgn_Nexus_vPC_DG.pdf
Hope to Help !!
Ganesh.H
Remember to rate the helpful post

Please shed some light on Data Center design

Hi,
    I want you guys to recommend what the design should be. I'm familiar with HP blade system. Let me clarify the existing device.
1. HP Blade with Flex Fabric. It supports FCOE.
2. MDS SAN switch for the storage
3. Network Switch for IP network.
4. HP Storage.
    HP Blade has 2 interface types for IP Network(Network Switch) and Fiberchannel(SAN).
   What is the benifit for using Nexus switch and FCOE for my exising devices. What should be a new design with Nexus switch? Please guide me ideas.
THX
Toshi

Hi, Toshi:
Most of these chat boards have become quite boring. Troubleshooting OSPF LSA problems is old news. But I do pop my head in every now and then. Also, there are so many other companies out there doing exciting things in the data center. You have Dell, Brocade, Arista, Juniper, etc. So one runs the risk of developing a myopic view of the world of IT by lingering around this board for too long.
If you want to use the new B22 FEX for the HP c7000 blade chassis, you certainly can. That means the Nexus will receive the FCoE traffic and leverage its FCF functionality; either separate the Ethernet and FC traffic there, or create a VE-port instantiation with another FCF for multihop deployments. Good luck fighting the SAN team with that one! Another aspect of using the HP B22 is the fact that the FEX is largely plug and play, so you dont have to manage the Flex Fabric switches.
HTH

Data Center Design: Nexus 7K with VDC-core/VDC-agg model

Dear all,
I'm doing with a collapsed VDC-core/VDC-agg model on the same chassis with 2 Redundant Cisco Nexus 7010 and a pair of Cisco 6509 used as a Service Chassis without VSS. Each VDC Core have redundant link to 2 PE based on Cisco 7606.
After reading many design document of Cisco, I'm asking what is the need of a Core Layer in a Data Center especially if it is small or medium size with only 1 aggregation layer and dedicated for a Virtualized Multi-Tenanted environement? What is driving to have a core layer?
Thanx

If your data center is small enough to not require a core, then its fine to run with a collapsed core (distribution + core as the same device). For a redundant design you need to uplink all your distribution switches to each of your cores. If you have no cores, then you need full mess at your distribution layer (for full redundancy).
Lets say you have only 4 distribution pairs...so 8 switches For full redundancy each one needs uplink to each other. This means you need 28 total ports used to connect all the switches together (n(n-1)/2). Thats also assuming 1 link to each device. However if you had redundant cores, the number of links used for uplinks reduces to 21 total links (this includes links between each distribution switch in a site, and link between the two cores). So here you see your only saving 7 links. Here your not gaining much by adding a core.
However if you have 12 distribution pairs...so 24 switches. Full redundancy means you have 276 links dedicated for this. If you add a core, this drops to 61 links. Here you see the payoff.

Need helip for data center designing

Sir ,
I am going to design a data center where the following equipments are the
1. one router 7609
2. two core switch (WS-C6509-E)
3. two firewall (WS-C6506-E, with Firewall blade)
4. one VOICE ROUTER (CISCO2821with PVDM2-64, VWIC2-2MFT-T1/E1, PVDM2-32)
5. one Remote Access Server (AS5400XM, AS5000XM 60 Dial Port Feature Card, AS5400 Octal E1/PRI DFC card)
6. two CALLMANAGER-5.1
7. multiple no of Cisco IP Phone 7940G with Video Advantage with VT Camera II
8. one Gatekeeper (2811)
9. one Internet Router (3845)
10. one Authentication, Authorization and Accounting (AAA) System
11. one ISDN RAS 2811 with2-Port Channelized E1/T1/ISDN-PRI Network Module with video conferencing (polycom)
12. one Network Intrusion Detection/ Prevention System (NIDS)
13. one NMS
14. one Content Switch for Server Load Balancing
15. multiple Video Phone
16. lots of sever ( mail. Web, storage, etc )
17. polycom MGC 100
18. polycom 7000
also 20 no of 7206 VXR will be connect with 7609 router through lease line
so.. if u send me some link or some sample design and share some advice where I can gather some idea to design this data center in a proper way
thanks
tirtha

IMO opinion the best place to start is by reading the SRNDs. They can be found here-
http://www.cisco.com/en/US/netsol/ns656/networking_solutions_design_guidances_list.html
Hope that helps.

SAP BW and IT infra srtucture service domain ( Data center opearations )

How does SAP BW come into play in the IT infra srtucture service domain ( Data center opearations ),
What are the kinds of reports genearted if at the end user level and at the organization level ( Only operations specific )

for better replies to this query please move this question to the BW/BI forum - https://www.sdn.sap.com/irj/scn/forums

Making powermac G4 MDD for data center for small office server

Hi mac expert,
i had a small office which need to pool every data audio and metadatas ( wav, mp3, flac, mp4, mov, ms office xls, docs, jpeg, tiff ) into 1 place or hard disk that can be access from any macs and pcs in the same office.
i have 2 units G4 1Ghz MDD (bus speed 133mhz, both has 2 gb of RAM, a 120 gb of HD internal installed.
i upgrade one of those with DP 1,42ghz and 2TB of SATA hard disk that attached to PCI SATA Sonnet card.
installed mac osx 10.5.8 leopard.
airport extreem card installed.
my questions:
- How big a hard drive can I get? I installed a 2TB drive with no partion, but sometimes when i open the disk it gave me spinning cursor and it show no items on that drive, got freeze and can not turn of by shutdown menu, i have to press the power button of the mac itself.
- if i want to make a data center like what i mention above using powermac G4 that i had, what should i do?
- should i install leopard server os?
thank you so much.

MacDrive may work, also see if these are still avaiable...
NTFS-3G Stable Read/Write Driver...
http://www.ntfs-3g.org/
MacFUSE: Full Read-Write NTFS for Mac OS X, Among Others...
http://www.osnews.com/story/16930
MacDrive for the PCs... allows them to Read/Write HFS+...
http://www.mediafour.com/products/macdrive/

What are share point server 2013 & Share point Designer 2013 & Office 365 & Yammer & Share point 2013 & Windows server 2008 server & Windows Server 2012 Server Data Center?

I need some clarifications.
What are share point server 2013 & Share point Designer 2013 & Office 365 & Yammer & Share point 2013 & Windows server 2008 server & Windows Server 2012 Server Data Center? How each them are related in collaboration system?
Is Share point server 2013 and Share pointer Designer 2013 available in 32bit version? If not, then how to use it in 32 bit machine by using any VMs?
Thanks
Senthil

SharePoint Server 2013:
http://office.microsoft.com/en-us/microsoft-sharepoint-collaboration-software-FX103479517.aspx
SharePoint Designer 2013:
Designer is used to develop SharePoint pages using HTML/CSS/JS as well as SharePoint Designer Workflows
Yammer:
https://about.yammer.com/
Windows Server is Windows, but the Server OS. SharePoint runs on top of supported Windows Servers editions (see http://technet.microsoft.com/en-us/library/cc262485.aspx).
SharePoint Server is 64-bit only (trial:
http://technet.microsoft.com/en-us/evalcenter/hh973397.aspx), although Designer does have a 32-bit edition (full product:
http://www.microsoft.com/en-us/download/details.aspx?id=35491).
You will need the capability to run 64bit VMs. Minimum recommended all-in-one VM for SharePoint is to allocate 24GB of RAM, but you can get away with as little as 12GB (I wouldn't go below that). Because of this, it generally rules out 32bit OSes as a virtual
machine host.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Recommended Design for WAAS in both Data center and Branch Offices

Hi All,
I need to purchase different appliances for WAAS, but before I decide what to purchase, I need to know exactly how I am going to put these devices so that I can know which one to purchase and how the designs will be.
My environment is as follows:
I have two core routers (ASR 1000 series) at Data center, two 6509 switches (expecting to insert the ACE module, and FW module) and the I have access switches which connects servers.
At the branch offices, I am expecting to place ASR1000 series also.
Now, I need to know the recommended designs for these WAAS appliances so that, I can know in advance what to purchase(i.e. how many WAAS CM, Core WAE, and Edge WAE).
Any input will highly be appreciated.
Thanks,

If you purchase the Standard Edition, your license supports:
One installation of Cisco Security Manager on one Windows-based server.
The configuration or management of 5 devices (in the Standard-5 option) or 25 devices (in the Standard-25 option). This excludes Catalyst 6500 and 7600 Series devices and their associated service modules.
If you purchase either the Standard-5 or Standard-25 license, you cannot purchase an incremental device license. Your license is fixed at either 5 or 25 devices.

Data Center Network Design

I'm looking at a couple options for a small network in a data center. I seem to be getting hung up on all the different options. One of the options I'm looking at is end or row using both 2960Ss and Blade Center chassis switches with each physical server dual homed into a 2960, each ESX server dual homed into a blade switch and each of the switches with a Layer 2 10Gb uplink (20 total with etherchannel) to one of two 4900Ms. The 4900Ms would then have a layer 2 uplink between them to accomodate VLANs that span the access layer switches. This would be an inverted U topology. That's simple enough, and maybe that is where I should leave it, but there is the now available stacking feature of 2960s that has me wondering if there is another option available with dual homing a stack. Is there such a beast? Would it be better to stack 2960s, or even 3750s, so as to make each end of row with 2 redundant switches appear as one logical stack, and then uplink that stack to an aggregate multilayer switch such as a pair of 4900Ms? Or might that limit me to keeping VLANs within a stack and end or row?
thank you,
Bill

Hi Bill-
First, I personally would not use the 2960S for the data center, no matter the size. That switch was purposely built for user access and has some limitations. Also, depending on what you need to accomplish will determine your design. I recently did a design similar to what you are describing. We ended up putting 3750X's at the top of rack as a stack. This allows for etherchannel to your servers with both server NICs being active. From there we uplinked to a pair of 6509's in VSS. From a layer 2 point of view this was about as simple as it gets; 1 switch connected to another switch connected to a server. No spanning tree! If you can't afford stackable switches, you may want to look at routing at the top of rack. However you will lose functionality like moving VLAN's between racks, relying on server NIC software for active/passive links and the moving of VM's could be limited.

URGENT: QoS Design on Data Center MPLS - MediaNet Question...

Hello,
I am posting this in hopes I can get some guidance from anyone who has done this in the field. We have a large enterprise customer with 21 sites all around the world, they have Verizon MPLS and are experiencing QoS related issues on their WAN regarding Video/Voice. We have proposed remediating their network acccording to the Enterprise QoS SRND 3.3 and the new MediaNet SRND to account for Video and TP QoS (
http://www.cisco.com/en/US/docs/solutions/Enterprise/WAN_and_MAN/QoS_SRND_40/QoSCampus_40.html )
Here is the problem/question that was proposed in our presales meeting and I honestly don't know where to look for an answer... I am not asking for anyone to design a solution for me, just merely point me in the right direction:
The Data Center has a ~40MB MPLS Connection ( full mesh ) into the cloud ( Verizon )
Site A has a 8MB connection
Site B has a 4MB connection
I know on the Service policy and the interfaces at SiteA and SiteB I can assign "Bandwidth xxxx" and use ~95% of the bandwidth to do queuing and shaping/policing ect. I am not concerned with SiteA and SiteB, that I think I can handle...
Question was posed from the customer, "How can we ensure at the DataCenter level the 40MB MPLS is "chopped" up so that only 8MB of the total speed goes to SiteA ALONG with an attached QoS policy designed for that specific site, as well as ensure only 4MB goes to SiteB with an attached QoS policy.
So I am looking for a way to allocate bandwith per site on the DC 40MB connection going into the cloud ( so that SiteB cannot use more than 4MB ) and attach a MediaNet specific QoS Service policy to that site. The customer does not have seperate MPLS circuits for each site, they all come into the DC on 40MB shared ethernet connection ( no VC, or dedicated circuits to other sites ).
Any thoughts on if this is possible?
Thanks!
Alex

This is an example I have seen and I hope that is useful to you.
Site A
Subnet: 172.16.1.0/24
Site B
Subnet:172.16.2.0/24
HeadOffice:
ip access-list extended Site_A
permit ip any 172.16.1.0 0.0.0.255
ip access-list extended Site_B
permit ip any 172.16.2.0 0.0.0.255
class-map match-any Site_A
match access-group name Site_A
class-map match-any Site_B
match access-group name Site_B
policy-map To_Spokes
class Site_A
shape average 8000000
service-policy Sub_Policy(Optional)
class Site_B
shape average 4000000
service-policy Sub_Policy(Optional)
class class-default
shape average 28000000
service-policy Sub_Policy(Optional)
Interface G0/0
Description To MPLS cloud
bandwidth 40000000
service-policy output To_Spokes
interface G0/1
Description To HeadOffice
bandwidth 40000000
service-policy output To_Spokes
It would be greatly appreciated if someone can correct this or improve it as I am still learning.
Please see the netflow graph from one of our routers using a similar policy as above.

How to design Master datas?? Whats is Time Scenarios???Explain..

How to design Master datas?? Whats is Time Scenarios???
Can anybody explain about Time Scenarios???

Hi..
to tell it is huge ..
but a slice of it
Design           Create design documents
Prod.           Make the product
Quality           Confirm quality of product
Sales          - Market the product
Purchase                    Procure the items
Accounts                       To control the cost of Mfg
These steps should be understood as a general approach. To what extent they must be carried out depends
on the actual situation and the experience of the project members involved.
After deciding on the business process being dealt with, the basic steps to implementing a BI based solution
are:
1. Focus on the structure of information
Develop a complete understanding of the underlying business processes. Create an Entity Relationship
Model (ERM) of the business process
The ERM as a function of the information
2. Focus on analytical needs - Overcome model complexity
Create a valid data model. Translate the ERM to the Multi-Dimensional Model (MDM) / Star schema
The MDM as a function of the analytical processing
3. Build the solution as a part of an integrated data warehouse
The Star schema on the BI stage are the InfoCubes. Translate the MDM / Star schema to one or more
InfoCube.
coming to time ..
How real-world changes are dealt with, i.e. how the different time aspects are handled is the most
important topic with data warehouses.
The attributes of a characteristic that will reside in its master data table are determined in the modeling
phase. Each attribute can be defined individually as being time dependent:
There is one time dependent check box for each attribute in the attribute tab page section.
Time dependency of an attribute allows you to keep track on the changes over time of the relation of the
characteristic and the time dependent attribute values.
In terms of technical implementation, two master data tables exist if we have both non-time dependent
and time dependent attributes.
One master data table stores all relations to non-time dependent attributes (name of the table:
/BIC/P<InfoObject name>) and
One table stores relations to time dependent attributes (name of the table: /BIC/Q<InfoObject
name>).
The time dependent attributes master data table has additional DATETO and DATEFROM system
attributes. In queries the different constellations are addressed using the key date ( Query properties).
The validity attributes are not available for navigation.
The text table, or better the description attributes, may be defined as time dependent.
SID tables with respect to master data:
The SID table is always generated if an InfoObject is not defined as attribute only (tab page general).
This table is used if the access to an Infocube or DataStore Object uses a navigational attribute or if the
access is via a characteristic without attributes. Name of the table: /BIC/S<InfoObject name>
The non-time dependent attribute SID table of a characteristic for access via non-time dependent
attributes. Name of the table: /BIC/X<InfoObject name>
The time dependent attribute SID table of a characteristic for access via time dependent attributes.
Name of the table: /BIC/Y<InfoObject name>
with regards,
hari kv

How to find the what version ( Data center or Standard ) of SCOM installed

How to find the what version ( Data center or Standard ) of SCOM installed
Raghavendra Bhat

Raghavendra, you are true. There are two version of System center
Microsoft considers the Standard version for those who are “lightly” virtualized, i.e., those that do not need an excessive number of VMs running in the organization. The license for Standard includes 2 processors and 2 VMs (or two
OS instances). You can stack licenses if you need to add additional processors or additional VMs in your environment, but there is a breakpoint where it makes more sense, financially, to opt for the Datacenter package. That breakpoint will generally
be around 5 VMs. Pricing is $1,323 for System Center 2012 Standard.
Microsoft considers the Datacenter version for those organizations who are highly virtualized. System Center 2012 Datacenter licenses include an unlimited number of Operating System Environments (OSEs) in an on premises environment
or eight OSEs in a public cloud environment. Large Enterprises and Cloud providers will benefit most from this model. Pricing is $3,615 for System Center 2012 Datacenter.
For more information about licensing and difference between system center Datacenter and standard, you can refer below link
http://myitforum.com/myitforumwp/2012/01/17/new-system-center-2012-suite-versioning-and-licensing-model-simplifies-and-excites/
Please remember, if you see a post that helped you please click (Vote As Helpful) and if it answered your question, please click (Mark As Answer).

What is the best approach to migrate SharePoint farm from one data center to other datacenter

We have two web front server and one application server and two instances for database server and we have to migrate complete farm from one data center to other data center with minimal downtime and end user impact.
Please provide your best input on this.
Thanks in advance.

Create a new farm in the secondary Data Center at the same patch level with the desired configuration. Replicate the databases using the method of choice (Mirroring, AlwaysOn, etc.). Create a downtime window where you can then attach the databases to the
new farm's Web Application(s)/Service Application(s).
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Data center design! What is ACE

Similar Messages

Maybe you are looking for