Data Center formation

Hi Experts ,
We are in the process of forming data Center - database consolidation / integration
We have around 7 Oracle databases which we would like to bring together into 1 machine
Can you tell me which of the following configuration is recommended ?
One Server - Create 7 LPARS - 1 oracle instance per LPAR
One Server - No LPAR - 7 oracle instances
One Server - One Oracle Instance - One Schema per Application
Thanks

It will depend on like what kind of applications theses databases are serving .
Please also have a look at :
http://www.nocoug.org/download/2002-11/db_consolidation.ppt
http://www.dba-oracle.com/art_dbazine_server_consolidation.htm
http://blogs.oracle.com/enterprisearchitecture/2009/12/database_consolidation_-_oracl.html
Regards
Rajesh

Similar Messages

After installing Windows Server 2008 DATA CENTER stuck on blank screen and command prompt window

After a new fresh install of Windows Server 2008 Data Center I get this solid blue screen with a comand prompt window showing (user\Administrator) I have limited use of the commands, am able to bring up the task manager by CTL Del and perform limited functions. I was able to run the same software on this machine before, nothing has changed. The way I ran the software on it before was from an image I deployed to it,(not from a fresh install). The old image timed out and I could not rearm it, that is why I did a fresh install. I tried to use gpedit.msc but the command did not work.

You may be using Windows with limited functionality as the previous version expired. Did you re-format the drive/partition before you did the "fresh" install if not Windows probably kept the old install information so knew that it was expired previously. Either activate Windows (try typing slui.exe and filling in the product key and activate - then restart the machine) or re-format the drive/partition that Windows is on and re-install Windows again.

Welcome to the Solutions and Architectures Data Center & Virtualization Community

Welcome to the Solutions and Architectures Data Center & Virtualization Community. We encourage everyone to share their knowledge and start conversations related to Data Center and Virtualization Solutions and architectures.All topics are welcome, including Servers – Unified Computing, Data Center Security, Data Center Switching, Data Center Management and Automation, Storage Networking, Application Networking Services and solutions to solve business problems.
Remember, just like in the workplace, be courteous to your fellow forum participants. Please refrain from using disparaging or obscene language or posting advertisements.
Cheers,
Dan Bruhn

Hi,
I have a question...
I going to install two Nexus 7009 with three N7K-F248XP-25 modules on each one, I am planning to create 3 VDC, but at the initial configuration the system does not show the ethernets ports of these modules, even with the show inventory and show module I can see tah the modules are recognized and its status is OK. There is something that I have to do before start to configure these modules...? enable some feature or license in order to see the ports with show running CLI...?

Welcome to the Enterprise Data Center Networking Discussion

Welcome to the Cisco Networking Professionals Connection Network Infrastructure Forum. This conversation will provide you the opportunity to discuss general issues surrounding Enterprise Data Center Networking. We encourage everyone to share their knowledge and start conversations on issues such as Mainframe connectivity, SNA Switching Services, DLSw+, managing SNA/IP and any other topic concerning Enterprise Data Center Networking.
Remember, just like in the workplace, be courteous to your fellow forum participants. Please refrain from using disparaging or obscene language or posting advertisements.
We encourage you to tell your fellow networking professionals about the site!
If you would like us to send them a personal invitation simply send their names and e-mail addresses along with your name to us at [email protected]

Hi together,
Since the release of SAP NetWeaver 2004s to 'Unrestricted Shipment' as of 6th of June 2006, we have renamed the forum 'SAP NetWeaver2004s Ramp-Up' to 'BI in SAP NetWeaver2004s'.
The forum should continue to adress BI issues particular to the release SAP NetWeaver 2004s. Please post general BI, project, etc. question to the other existing BI forums.
The SAP NetWeaver BI organisation will also use this forum to communicate / roll-out information particular to the release of SAP NetWeaver 2004s (in addtion to the FAQs and other material on the SAP Service Marketplace and information in other areas of the SDN).
Cheers
SAP NetWeaver BI Organisation

Deploying Cisco Overlay Transport Virtualization (OTV) in Data Center Networks

Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about how to plan, design, and implement Cisco Overlay Transport Virtualization (OTV) in your Data Center Network with Cisco experts Anees Mohamed Abdulla and Pranav Doshi.
Anees Mohamed Abdulla is a network consulting engineer for Cisco Advanced Services, where he has been delivering plan, design, and implementation services for enterprise-class data center networks with leading technologies such as vPC, FabricPath, and OTV. He has 10 years of experience in the enterprise data center networking area and has carried various roles within Cisco such as LAN switching content engineer and LAN switching TAC engineer. He holds a bachelor's degree in electronics and communications and has a CCIE certification 18764 in routing and switching.
Pranav Doshi is a network consulting engineer for Cisco Advanced Services, where he has been delivering plan, design, and implementation services for enterprise-class data center networks with leading technologies such as vPC, FabricPath, and OTV. Pranav has experience in the enterprise data center networking area and has carried various roles within Cisco such as LAN switching TAC engineer and now network consulting engineer. He holds a bachelor's degree in electronics and communications and a master's degree in electrical engineering from the University of Southern California.
Remember to use the rating system to let Anees and Pranav know if you have received an adequate response.
Because of the volume expected during this event, Anees and Pranav might not be able to answer each question. Remember that you can continue the conversation on the Data Center, sub-community forum shortly after the event. This event lasts through August 23, 2013. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hi Dennis,
    All those Layer 2 extension technologies require STP to be extended between Data Centers if you need to have multiple paths between Data Centers. OTV does not extend STP rather it has its own mechanism (AED election) to avoid loop when multiple paths are enabled. It means any STP control plane issue, we don't carry to the other Data Center.
    OTV natively suppresses Unknown Unicast Flooding across the OTV overlay. Unknown unicast flooding is a painful problem in layer 2 network and difficult to troubleshoot to identify the root cause if you don't have proper network monitoring tool.
   It has ARP optimization which eliminates flooding ARP packets across Data Center by responding locally with cached ARP messages. One of the common issues I have seen in Data Center is some server or device in the network sends continuous ARP packets which hits Control plane in the Aggregation layer which in turn causes network connectivity issue.
The above three points proves the Layer 2 domain isolation between data centers. If you have redundant Data Centers with Layer 2 extended without OTV, the above explained layer 2 issue which happens in one Data Center carries the same failure to the second data center which creates the question of what is the point of having two different Data Centers if we can not isolate the failure domain.
OTV natively supports HSRP localization with few command lines. This is a very important requirement in building Active/Active Data Center.
Even though your question is related to L2TP, OTV deserves the comparison with VPLS and those comparison will also be applicable for L2TP. The below link explains in detail...
http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9402/white_paper_c11-574984.html
Thanks,
Anees.

Windows server 2012 Data Center with VDI configuration error message ( The remote session was disconnected because there are no remote desktop license servers available)

Dears,
I have two windows server 2012 Data Center and I configured (Virtual Desktop Interface)VDI on it's.
All my clients connected on both of servers by used Remote Desktop sessions ,5 months since.
Currently,when the clients is connected on the both of servers they received the following error:
"The remote session was disconnected because there are no remote desktop license servers available to provide license"
Kindly note, I installed windows Licenses Server Data Center on the both of servers.
Regards.

Hi,
Please let us know if you have purchased RDS CALs and install it in your RD licensing server.
Also, on RD Session host servers, please make sure that you have specified the license mode and point them to the RD licensing server.
Remote Desktop Services Client Access Licenses (RDS CALs)
http://technet.microsoft.com/en-us/library/cc753650.aspx
RD Licensing Configuration on Windows Server 2012
http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx
Hope this helps.
Jeremy Wu
TechNet Community Support

Ask the Expert: Scaling Data Center Networks with Cisco FabricPath

With Hatim Badr and Iqbal Syed
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about the Cisco FabricPath with Cisco technical support experts Hatim Badr and Iqbal Syed. Cisco FabricPath is a Cisco NX-OS Software innovation combining the plug-and-play simplicity of Ethernet with the reliability and scalability of Layer 3 routing. Cisco FabricPath uses many of the best characteristics of traditional Layer 2 and Layer 3 technologies, combining them into a new control-plane and data-plane implementation that combines the immediately operational "plug-and-play" deployment model of a bridged spanning-tree environment with the stability, re-convergence characteristics, and ability to use multiple parallel paths typical of a Layer 3 routed environment. The result is a scalable, flexible, and highly available Ethernet fabric suitable for even the most demanding data center environments. Using FabricPath, you can build highly scalable Layer 2 multipath networks without the Spanning Tree Protocol. Such networks are particularly suitable for large virtualization deployments, private clouds, and high-performance computing (HPC) environments.
This event will focus on technical support questions related to the benefits of Cisco FabricPath over STP or VPC based architectures, design options with FabricPath, migration to FabricPath from STP/VPC based networks and FabricPath design and implementation best practices.
Hatim Badr is a Solutions Architect for Cisco Advanced Services in Toronto, where he supports Cisco customers across Canada as a specialist in Data Center architecture, design, and optimization projects. He has more than 12 years of experience in the networking industry. He holds CCIE (#14847) in Routing & Switching, CCDP and Cisco Data Center certifications.
Iqbal Syed is a Technical Marketing Engineer for the Cisco Nexus 7000 Series of switches. He is responsible for product road-mapping and marketing the Nexus 7000 line of products with a focus on L2 technologies such as VPC & Cisco FabricPath and also helps customers with DC design and training. He also focuses on SP customers worldwide and helps promote N7K business within different SP segments. Syed has been with Cisco for more than 10 years, which includes experience in Cisco Advanced Services and the Cisco Technical Assistance Center. His experience ranges from reactive technical support to proactive engineering, design, and optimization. He holds CCIE (#24192) in Routing & Switching, CCDP, Cisco Data Center, and TOGAF (v9) certifications.
Remember to use the rating system to let Hatim and Iqbal know if you have received an adequate response.
They might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Data Center sub-community Unified Computing discussion forum shortly after the event. This event lasts through Dec 7, 2012.. Visit this support forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hi Sarah,
Thank you for your question.
Spanning Tree Protocol is used to build a loop-free topology. Although Spanning Tree Protocol serves a critical function in these Layer 2 networks, it is also frequently the cause of a variety of problems, both operational and architectural.
One important aspect of Spanning Tree Protocol behavior is its inability to use parallel forwarding paths. Spanning Tree Protocol forms a forwarding tree, rooted at a single device, along which all data-plane traffic must flow. The addition of parallel paths serves as a redundancy mechanism, but adding more than one such path has little benefit because Spanning Tree Protocol blocks any additional paths
In addition, rooting the forwarding path at a single device results in suboptimal forwarding paths, as shown below, Although a direct connection may exist, it cannot be used because only one active forwarding path is allowed.
Virtual PortChannel (vPC) technology partially mitigates the limitations of Spanning Tree Protocol. vPC allows a single Ethernet device to connect simultaneously to two discrete Cisco Nexus switches while treating these parallel connections as a single logical PortChannel interface. The result is active-active forwarding paths and the removal of Spanning Tree Protocol blocked links, delivering an effective way to use two parallel paths in the typical Layer 2 topologies used with Spanning Tree Protocol.
vPC provides several benefits over a standard Spanning Tree Protocol such as elimination of blocker ports and both vPC switches can behave as active default gateway for first-hop redundancy protocols such as Hot Standby Router Protocol (HSRP): that is, traffic can be routed by either vPC peer switch.
At the same time, however, many of the overall design constraints of a Spanning Tree Protocol network remain even when you deploy vPC such as
1.     Although vPC provides active-active forwarding, only two active parallel paths are possible.
2.     vPC offers no means by which VLANs can be extended, a critical limitation of traditional Spanning Tree Protocol designs.
With Cisco FabricPath, you can create a flexible Ethernet fabric that eliminates many of the constraints of Spanning Tree Protocol. At the control plane, Cisco FabricPath uses a Shortest-Path First (SPF) routing protocol to determine reachability and selects the best path or paths to any given destination in the Cisco FabricPath domain. In addition, the Cisco FabricPath data plane introduces capabilities that help ensure that the network remains stable, and it provides scalable, hardware-based learning and forwarding capabilities not bound by software or CPU capacity.
Benefits of deploying an Ethernet fabric based on Cisco FabricPath include:
• Simplicity, reducing operating expenses
– Cisco FabricPath is extremely simple to configure. In fact, the only necessary configuration consists of distinguishing the core ports, which link the switches, from the edge ports, where end devices are attached. There is no need to tune any parameter to get an optimal configuration, and switch addresses are assigned automatically.
– A single control protocol is used for unicast forwarding, multicast forwarding, and VLAN pruning. The Cisco FabricPath solution requires less combined configuration than an equivalent Spanning Tree Protocol-based network, further reducing the overall management cost.
– A device that does not support Cisco FabricPath can be attached redundantly to two separate Cisco FabricPath bridges with enhanced virtual PortChannel (vPC+) technology, providing an easy migration path. Just like vPC, vPC+ relies on PortChannel technology to provide multipathing and redundancy without resorting to Spanning Tree Protocol.
Scalability based on proven technology
– Cisco FabricPath uses a control protocol built on top of the powerful Intermediate System-to-Intermediate System (IS-IS) routing protocol, an industry standard that provides fast convergence and that has been proven to scale up to the largest service provider environments. Nevertheless, no specific knowledge of IS-IS is required in order to operate a Cisco FabricPath network.
– Loop prevention and mitigation is available in the data plane, helping ensure safe forwarding that cannot be matched by any transparent bridging technology. The Cisco FabricPath frames include a time-to-live (TTL) field similar to the one used in IP, and a Reverse Path Forwarding (RPF) check is also applied.
• Efficiency and high performance
– Because equal-cost multipath (ECMP) can be used the data plane, the network can use all the links available between any two devices. The first-generation hardware supporting Cisco FabricPath can perform 16-way ECMP, which, when combined with 16-port 10-Gbps port channels, represents a potential bandwidth of 2.56 terabits per second (Tbps) between switches.
– Frames are forwarded along the shortest path to their destination, reducing the latency of the exchanges between end stations compared to a spanning tree-based solution.
    – MAC addresses are learned selectively at the edge, allowing to scale the network beyond the limits of the MAC addr

Specifying date time format in Finder

How can I specify the date-time format in Finder for the "date-modified" and "date-created" columns in list view?
About three years ago, I got a command line instruction to set these formats and I kept it at mm/dd/yy
Then a couple days ago, I changed the date format in iStat menus and the date-time formats started acting weird. I want the dates to be like "07/08/05" (mm/dd/yy) and then the formats started changing to "November 07, 2008" (month/dd/yyyy). This change seemed to take effect any time I open the view options for a folder. Now I discovered that the date format change depending on the column width according to the format specified in system preferences, international, formats.
Narrow column, short date format; a little wider to long format, with ellipses if the column is not wide enough; then full format.
Does anyone know the command line to set the format to keep it to the one I want?

this doesn't seem to be it. however I now like the way Finder does display dates -- format gets more compact as the width of the column decreases; although there still is some excess space left on the left -- perhaps for AM & PM which I don't use; I use a 24 hour time format instead.
Happy New Year

Trasnform current date to format MM/dd/yyyy HH:mm:ss AM/PM

Hi All,
How do I transform current date to format MM/dd/yyyy HH:mm:ss AM/PM?
I am able to get the format MM/dd/yyyy HH:mm:ss by using the standard date function. How do I get AM or PM to end of MM/dd/yyyy HH:mm:ss??
Thanx
Navin

Hi Navin,
How AM/PM is added? In the sample values given its in 24 hrs notation. Are u sure you want to add AM/PM to this notation? or U want to change this 24 hrs notation into 12 hrs and add AM/PM?
For converting into 12 hrs and appending AM/PM you can use this code:
input a:
int hr = Integer.parseInt(a.substring(11,13));
String appendVal = "AM";
if(hr > 12){
   hr = hr - 12;
   appendVal = "PM";
} else if(hr == 12){
   appendVal = "PM";
} else if(hr == 00){
   hr = hr + 12;
Sting finalVal = a.substring(0,11) + String.ValueOf(hr) + a.substring(13,a.length()) + appendVal;
return finalVal;
Regards,
P.Venkat
Message was edited by:
        Venkataramanan

When trying to start my Windows server 2008 R2 Data Center, I am getting "ramdisk device creation failed due to insufficient memory",

I have the following:-
VMWare workstation version 9 , with windows server 2008 R2 data center installed.
- I have installed the windows 2008 R2 inside the VM using an iso image.
- The host is windows 7.
I use to work well with the VM, but after adding a new VM to the same workstation . I start getting the following error when starting my old VM
ramdisk device creation failed sue to insufficient memory.
And on the windows boot manger screen they mentioned to :-
inset my windows installation dis and restart my PC.
click “repair your computer”
but not sure if this will fix the problem , baring in mind that the RAM assigned to the VM
is 24 GB & 80 GB hard disk.
The error is
Link.
so can any one advice what is causing this error?
Thanks

You might start by checking the RAM.
http://windows.microsoft.com/en-US/windows7/Diagnosing-memory-problems-on-your-computer
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Please shed some light on Data Center design

Hi,
    I want you guys to recommend what the design should be. I'm familiar with HP blade system. Let me clarify the existing device.
1. HP Blade with Flex Fabric. It supports FCOE.
2. MDS SAN switch for the storage
3. Network Switch for IP network.
4. HP Storage.
    HP Blade has 2 interface types for IP Network(Network Switch) and Fiberchannel(SAN).
   What is the benifit for using Nexus switch and FCOE for my exising devices. What should be a new design with Nexus switch? Please guide me ideas.
THX
Toshi

Hi, Toshi:
Most of these chat boards have become quite boring. Troubleshooting OSPF LSA problems is old news. But I do pop my head in every now and then. Also, there are so many other companies out there doing exciting things in the data center. You have Dell, Brocade, Arista, Juniper, etc. So one runs the risk of developing a myopic view of the world of IT by lingering around this board for too long.
If you want to use the new B22 FEX for the HP c7000 blade chassis, you certainly can. That means the Nexus will receive the FCoE traffic and leverage its FCF functionality; either separate the Ethernet and FC traffic there, or create a VE-port instantiation with another FCF for multihop deployments. Good luck fighting the SAN team with that one! Another aspect of using the HP B22 is the fact that the FEX is largely plug and play, so you dont have to manage the Flex Fabric switches.
HTH

Date Field Formatting

Hi All,
I'm back already! Learning Flash is beginning to get to me
again so I returned for yet more help!
I've written the following AS code to get tomorrow's date . .
// Calculates today's date and tomorrow's date
var dToday:Date = new Date();
dToday.getDate()
trace("today: " + dToday) //today's date
myD = dToday.getDate() + 100; // plus one day
var dTomorrow:Date = new Date();
dTomorrow.setDate(myD)
trace("new: " + dTomorrow) //tomorrow's date
var strDate:String = new String();
var strDate = String(dTomorrow);
trace("String: " + strDate);
The strDate string returns the following value . . . "Tue Jul
11 16:19:57 GMT+0100 2006".
That is all well and good but I want to convert it into the
following format for comparison with another field . . .
"200607111619" which is basically the same value in the following
format . . . "yyyymmddhhmm".
Does the only way of doing this involve using parsing logic
to break down the original string and then reconstruct it in the
required format using variables from the broken down original
string?
I have tried looking at the Date Field object notes in my
book but it does not give me anything as regards this programming
requirement. The only thing I can find that might suit this purpose
is string parsing logic. Am I right or is there an easier way to
set a date field format?
Any help would as always be much appreciated!
Thanks,
Kevin.

I'm working on an application which requires a valid Voucher
Number to proceed. The Voucher number is based on a combination of
'date/time/no of items' (e.g. 20060711095802 which is today at
09:58 (on a 24 hr clock) for 2 (02) items).
As this date this date/time Voucher Number logic is
essentially sequential, in that each subsequent Voucher Number will
be greater than the last good known Voucher Number entered into the
application (which is already stored in a variable field for
comparison). But it must also be less than tomorrow's date, for
which the Voucher Number would always be tomorrow's date (e.g.
20060712 at 00:00 hrs for 00 items, thus giving 20060712000000).
This is the value that I'm trying to ascertain from the date field
logic.
It would thus be really handy for comparison if I could just
format tomorrow's date and time in the format yyyymmddhhmm and just
add '00' to the end of the string.
I don't like the idea of using the milliseconds value as it
will be necessary then to convert the Voucher Number entered to a
date field for comparison.

URGENT: QoS Design on Data Center MPLS - MediaNet Question...

Hello,
I am posting this in hopes I can get some guidance from anyone who has done this in the field. We have a large enterprise customer with 21 sites all around the world, they have Verizon MPLS and are experiencing QoS related issues on their WAN regarding Video/Voice. We have proposed remediating their network acccording to the Enterprise QoS SRND 3.3 and the new MediaNet SRND to account for Video and TP QoS (
http://www.cisco.com/en/US/docs/solutions/Enterprise/WAN_and_MAN/QoS_SRND_40/QoSCampus_40.html )
Here is the problem/question that was proposed in our presales meeting and I honestly don't know where to look for an answer... I am not asking for anyone to design a solution for me, just merely point me in the right direction:
The Data Center has a ~40MB MPLS Connection ( full mesh ) into the cloud ( Verizon )
Site A has a 8MB connection
Site B has a 4MB connection
I know on the Service policy and the interfaces at SiteA and SiteB I can assign "Bandwidth xxxx" and use ~95% of the bandwidth to do queuing and shaping/policing ect. I am not concerned with SiteA and SiteB, that I think I can handle...
Question was posed from the customer, "How can we ensure at the DataCenter level the 40MB MPLS is "chopped" up so that only 8MB of the total speed goes to SiteA ALONG with an attached QoS policy designed for that specific site, as well as ensure only 4MB goes to SiteB with an attached QoS policy.
So I am looking for a way to allocate bandwith per site on the DC 40MB connection going into the cloud ( so that SiteB cannot use more than 4MB ) and attach a MediaNet specific QoS Service policy to that site. The customer does not have seperate MPLS circuits for each site, they all come into the DC on 40MB shared ethernet connection ( no VC, or dedicated circuits to other sites ).
Any thoughts on if this is possible?
Thanks!
Alex

This is an example I have seen and I hope that is useful to you.
Site A
Subnet: 172.16.1.0/24
Site B
Subnet:172.16.2.0/24
HeadOffice:
ip access-list extended Site_A
permit ip any 172.16.1.0 0.0.0.255
ip access-list extended Site_B
permit ip any 172.16.2.0 0.0.0.255
class-map match-any Site_A
match access-group name Site_A
class-map match-any Site_B
match access-group name Site_B
policy-map To_Spokes
class Site_A
shape average 8000000
service-policy Sub_Policy(Optional)
class Site_B
shape average 4000000
service-policy Sub_Policy(Optional)
class class-default
shape average 28000000
service-policy Sub_Policy(Optional)
Interface G0/0
Description To MPLS cloud
bandwidth 40000000
service-policy output To_Spokes
interface G0/1
Description To HeadOffice
bandwidth 40000000
service-policy output To_Spokes
It would be greatly appreciated if someone can correct this or improve it as I am still learning.
Please see the netflow graph from one of our routers using a similar policy as above.

How do you add a format to the "Date Picker Format Mask" available formats?

Hi,
When I select the Date Picker Format Mask or "Number / Date Format" they doen't have YYYYMMDD or others that may be desired...
How do you add a format to the available formats?
Thank you, Bill

Bill - From the popup help text:
If you need to create a Date Picker item, but the format you need does not appear in the Display As list, select Date Picker (use application format mask). When an application uses this type of date picker, the Application Express engine derives the date format from an item named PICK_DATE_FORMAT_MASK. You can populate this item in two ways:
- By defining an application substitution string named PICK_DATE_FORMAT_MASK
- By creating an application-level item named PICK_DATE_FORMAT_MASK
See the doc for more details.
Scott

Convert Epoch Date Time to Date Time format

I am trying to convert Epoch Date time in GMT to Human Readable Date time format in UTC. I used the one below but it returns just the date in GMT but how can get datetime in UTC ?
select To_Char( To_Date( '01.01.1970 06:00:00','DD.MM.YYYY HH24:Mi:Ss') + STARTIME / 86400,'DD.MM.YYYY HH24:Mi:ss') FROM HQ_AVAIL_DATA_RLE;
I refered a couple of forums and applied everything, but still I wouldn't get the timestamp.
Please note that i'm looking for datetime stamp, not just the date.
Thanks in advance!
Edited by: 830754 on Jan 27, 2011 11:18 AM
Edited by: 830754 on Jan 27, 2011 11:19 AM

Works for me. I see date and time (submitted 1000 for STARTTIME):
select To_Char( To_Date( '01.01.1970 06:00:00','DD.MM.YYYY HH24:Mi:Ss') + 1000 / 86400,'DD.MM.YYYY HH24:Mi:ss')
from dual
TO_CHAR(TO_DATE('01
01.01.1970 06:16:40Or do you mean something else?

Data Center formation

Similar Messages

Maybe you are looking for