Data collection failing
LMS 4.1 W2k8 R2
I recently installed 17 stacks of 3560V2 switches at a site and added them to LMS4.1. What I have found is that data collection is failing for all but the top switch in the stack. In other workds, in some cabinets I may have 4 switches connected back to a 6500 core. Data collection succeeds for only the switch connected to the core. UT info is not collected for the switches that fail data collection.
If I go to the device status dashboard I see that I have data collection succeeding for 56 devices and failing for 96 devices. For the devices that fail some are listed as unreachable and others as never-reachable. In either case, the following is suggested as a resolution:
Verify the following :
1. Device is reachable using ping.
2. Verify that DCR is configured with correct credentials for the device.
These devices are reachable. Inventory collection is succeeding. If I test reachability in device center I get successes across the board - even for SSH, though no username is specified in DCR so I can't see how that works.
The 17 stacks I just installed are configured as clusters in those cabinets that have more than 1 switch. However, they are not managed as clusters by LMS. They all have IP addresses. I just use clustering to facilitate bouncing around a stack from a telnet command line.
I deleted one of these switches and re-added. Now ping, HTTP, SSHv1 & v2 succeed in device center - but everything else fails. When I run a credential verification job on this switch it reports SNMP read and write success, telnet & enable success, and SSH "no value to test". The credential verification results are as I would expect.
I am at a loss at this point. How do I troubleshoot the data collection issue?
-Jeff
I found the answer to my particular problem here:
Campus Manager and cluster-member switches
Similar Messages
-
Standard Data Collection Failing with Error ORA-04054: database link does not exist.
Hi Gurus,
When I am running Standard Data Collection in ASCP(APS) instance R12.1.3, its failing with error : ORA-04054: database link does not exist.
There is no such Database link exits which is showing in above error.
Also the database link name in the above error is not profile values in the database.
I think, concurrent might be fetching this database link name from some tables related to plan.
I am not having much knowledge about how this ASCP/APS works.
Need your help to resolve this issue.
Thanks,Hi,
ASCP Collections looks at the dblink from instances definitions from.
1. Responsibility: Advanced Planning Administrator
2. Navigation: Admin > Instances
You may review the note in support.oracle.com - Understanding DB Links Setup for APS Applications - ASCP and ATP Functionality (Doc ID 813231.1) -
OIA-Finalize Data Collection Failed
Hi,
We are facing an issue with OIM where we have OIA-OIM integration. The issue is that OIA imports were running fine until we suddenly rebooted the OIM server while the OIA import was in progress. After this we are unable to run any job to import the Resources and Entitlements. When we run it it throws the below error:
21:31:30,599 DEBUG [IamDataSyncMonitorImpl] OIMStatus FINALIZED
21:31:30,599 DEBUG [DBIAMSolution] Current IamDataSyncMonitor Status: DATA COLLECTION FINALIZED
21:31:30,600 INFO [DBIAMSolution] No Active DataLoad. Finalizing Previous Collection
21:31:30,600 INFO [OIMDataProviderImpl] Start Finalize Data Collection ...
21:31:30,849 DEBUG [DefaultIAMListener] Processing Event:com.vaau.rbacx.iam.IAMEvent[source=com.vaau.rbacx.iam.db.DBIAMSolution@1000d34c], exception:null
21:31:30,849 DEBUG [IbatisObjectStorageManagerImpl] Getting data with: {id=98}
21:31:30,850 DEBUG [DefaultIAMListener] Updating ImportRun 98
21:31:47,126 ERROR [OIMDataProviderImpl] Unable to finalize previous Data Collection
Thor.API.Exceptions.tcAPIException
at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:234)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
at Thor.API.Operations.DataCollectionOperationsIntfEJB_jpx61z_DataCollectionOperationsIntfRemoteImpl_1035_WLStub.finalizeDataCollectionSessionx(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
at $Proxy206.finalizeDataCollectionSessionx(Unknown Source)
at Thor.API.Operations.DataCollectionOperationsIntfDelegate.finalizeDataCollectionSession(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(SecurityInvocationHandler.java:68)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.security.Security.runAs(Security.java:41)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(weblogicLoginSession.java:52)
at Thor.API.Base.SecurityInvocationHandler.invoke(SecurityInvocationHandler.java:79)
at $Proxy207.finalizeDataCollectionSession(Unknown Source)
at com.vaau.rbacx.iam.db.support.oracle.OIMDataProviderImpl.finalizeDataCollectionSession(OIMDataProviderImpl.java:621)
at com.vaau.rbacx.iam.db.support.IamDataSyncMonitorImpl.finalizeCurrentCollection(IamDataSyncMonitorImpl.java:132)
at com.vaau.rbacx.iam.db.DBIAMSolution.loadData(DBIAMSolution.java:199)
at com.vaau.rbacx.iam.service.impl.RbacxIAMServiceImpl.dataLoad(RbacxIAMServiceImpl.java:510)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:106)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy132.dataLoad(Unknown Source)
at com.vaau.rbacx.scheduling.executor.iam.DbIamJobExecutor.execute(DbIamJobExecutor.java:83)
at com.vaau.rbacx.scheduling.manager.providers.quartz.jobs.AbstractJob.execute(AbstractJob.java:72)
at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:534)
Caused by: Thor.API.Exceptions.tcAPIException
at com.thortech.xl.ejb.beansimpl.DataCollectionOperationsBean.finalizeDataCollectionSession(DataCollectionOperationsBean.java:326)
at Thor.API.Operations.DataCollectionOperationsIntfEJB.finalizeDataCollectionSessionx(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy389.finalizeDataCollectionSessionx(Unknown Source)
at Thor.API.Operations.DataCollectionOperationsIntfEJB_jpx61z_DataCollectionOperationsIntfRemoteImpl.__WL_invoke(Unknown Source)
at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
at Thor.API.Operations.DataCollectionOperationsIntfEJB_jpx61z_DataCollectionOperationsIntfRemoteImpl.finalizeDataCollectionSessionx(Unknown Source)
at Thor.API.Operations.DataCollectionOperationsIntfEJB_jpx61z_DataCollectionOperationsIntfRemoteImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:668)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:523)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:119)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
21:31:47,127 ERROR [IamDataSyncMonitorImpl] Unable to finalize previous Data Collection; nested exception is Thor.API.Exceptions.tcAPIException
21:31:47,127 ERROR [DBIAMSolution] Unable to finalize previous Data Collection; nested exception is Thor.API.Exceptions.tcAPIException
com.vaau.rbacx.iam.RbacxIAMFailToFinalizeDataCollectionException: Unable to finalize previous Data Collection; nested exception is Thor.API.Exceptions.tcAPIException
at com.vaau.rbacx.iam.db.support.oracle.OIMDataProviderImpl.finalizeDataCollectionSession(OIMDataProviderImpl.java:628)
at com.vaau.rbacx.iam.db.support.IamDataSyncMonitorImpl.finalizeCurrentCollection(IamDataSyncMonitorImpl.java:132)
at com.vaau.rbacx.iam.db.DBIAMSolution.loadData(DBIAMSolution.java:201)
at com.vaau.rbacx.iam.service.impl.RbacxIAMServiceImpl.dataLoad(RbacxIAMServiceImpl.java:510)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:106)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy132.dataLoad(Unknown Source)
at com.vaau.rbacx.scheduling.executor.iam.DbIamJobExecutor.execute(DbIamJobExecutor.java:83)
at com.vaau.rbacx.scheduling.manager.providers.quartz.jobs.AbstractJob.execute(AbstractJob.java:72)
at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:534)
Caused by: Thor.API.Exceptions.tcAPIException
Please let me know if anyone has faced this issue before.
Thansk,
VishnuHi,
We are facing an issue with OIM where we have OIA-OIM integration. The issue is that OIA imports were running fine until we suddenly rebooted the OIM server while the OIA import was in progress. After this we are unable to run any job to import the Resources and Entitlements. When we run it it throws the below error:
21:31:30,599 DEBUG [IamDataSyncMonitorImpl] OIMStatus FINALIZED
21:31:30,599 DEBUG [DBIAMSolution] Current IamDataSyncMonitor Status: DATA COLLECTION FINALIZED
21:31:30,600 INFO [DBIAMSolution] No Active DataLoad. Finalizing Previous Collection
21:31:30,600 INFO [OIMDataProviderImpl] Start Finalize Data Collection ...
21:31:30,849 DEBUG [DefaultIAMListener] Processing Event:com.vaau.rbacx.iam.IAMEvent[source=com.vaau.rbacx.iam.db.DBIAMSolution@1000d34c], exception:null
21:31:30,849 DEBUG [IbatisObjectStorageManagerImpl] Getting data with: {id=98}
21:31:30,850 DEBUG [DefaultIAMListener] Updating ImportRun 98
21:31:47,126 ERROR [OIMDataProviderImpl] Unable to finalize previous Data Collection
Thor.API.Exceptions.tcAPIException
at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:234)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
at Thor.API.Operations.DataCollectionOperationsIntfEJB_jpx61z_DataCollectionOperationsIntfRemoteImpl_1035_WLStub.finalizeDataCollectionSessionx(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
at $Proxy206.finalizeDataCollectionSessionx(Unknown Source)
at Thor.API.Operations.DataCollectionOperationsIntfDelegate.finalizeDataCollectionSession(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(SecurityInvocationHandler.java:68)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.security.Security.runAs(Security.java:41)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(weblogicLoginSession.java:52)
at Thor.API.Base.SecurityInvocationHandler.invoke(SecurityInvocationHandler.java:79)
at $Proxy207.finalizeDataCollectionSession(Unknown Source)
at com.vaau.rbacx.iam.db.support.oracle.OIMDataProviderImpl.finalizeDataCollectionSession(OIMDataProviderImpl.java:621)
at com.vaau.rbacx.iam.db.support.IamDataSyncMonitorImpl.finalizeCurrentCollection(IamDataSyncMonitorImpl.java:132)
at com.vaau.rbacx.iam.db.DBIAMSolution.loadData(DBIAMSolution.java:199)
at com.vaau.rbacx.iam.service.impl.RbacxIAMServiceImpl.dataLoad(RbacxIAMServiceImpl.java:510)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:106)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy132.dataLoad(Unknown Source)
at com.vaau.rbacx.scheduling.executor.iam.DbIamJobExecutor.execute(DbIamJobExecutor.java:83)
at com.vaau.rbacx.scheduling.manager.providers.quartz.jobs.AbstractJob.execute(AbstractJob.java:72)
at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:534)
Caused by: Thor.API.Exceptions.tcAPIException
at com.thortech.xl.ejb.beansimpl.DataCollectionOperationsBean.finalizeDataCollectionSession(DataCollectionOperationsBean.java:326)
at Thor.API.Operations.DataCollectionOperationsIntfEJB.finalizeDataCollectionSessionx(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy389.finalizeDataCollectionSessionx(Unknown Source)
at Thor.API.Operations.DataCollectionOperationsIntfEJB_jpx61z_DataCollectionOperationsIntfRemoteImpl.__WL_invoke(Unknown Source)
at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
at Thor.API.Operations.DataCollectionOperationsIntfEJB_jpx61z_DataCollectionOperationsIntfRemoteImpl.finalizeDataCollectionSessionx(Unknown Source)
at Thor.API.Operations.DataCollectionOperationsIntfEJB_jpx61z_DataCollectionOperationsIntfRemoteImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:668)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:523)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:119)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
21:31:47,127 ERROR [IamDataSyncMonitorImpl] Unable to finalize previous Data Collection; nested exception is Thor.API.Exceptions.tcAPIException
21:31:47,127 ERROR [DBIAMSolution] Unable to finalize previous Data Collection; nested exception is Thor.API.Exceptions.tcAPIException
com.vaau.rbacx.iam.RbacxIAMFailToFinalizeDataCollectionException: Unable to finalize previous Data Collection; nested exception is Thor.API.Exceptions.tcAPIException
at com.vaau.rbacx.iam.db.support.oracle.OIMDataProviderImpl.finalizeDataCollectionSession(OIMDataProviderImpl.java:628)
at com.vaau.rbacx.iam.db.support.IamDataSyncMonitorImpl.finalizeCurrentCollection(IamDataSyncMonitorImpl.java:132)
at com.vaau.rbacx.iam.db.DBIAMSolution.loadData(DBIAMSolution.java:201)
at com.vaau.rbacx.iam.service.impl.RbacxIAMServiceImpl.dataLoad(RbacxIAMServiceImpl.java:510)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:106)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy132.dataLoad(Unknown Source)
at com.vaau.rbacx.scheduling.executor.iam.DbIamJobExecutor.execute(DbIamJobExecutor.java:83)
at com.vaau.rbacx.scheduling.manager.providers.quartz.jobs.AbstractJob.execute(AbstractJob.java:72)
at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:534)
Caused by: Thor.API.Exceptions.tcAPIException
Please let me know if anyone has faced this issue before.
Thansk,
Vishnu -
Dear Members :
For sake of learning, ATP in R12.1.1 Vision instance, I created a simple ATP rule with Demand as Sales Order and Supply as PO, On-hand Available.
I followed all the steps as below:
1) After creating ATP rule and attaching it to the order mgmt tab in item master, enabled ATP at the org level.
2) created sourcing rule for that item and assigned it to an assignment set(Supplier Scheduling).
3) This assignment set appears by default to MRP:ATP assignment set profile option
4) Set INV : Capable to Promise to ATP/CTP based on collected data, at responsibility level
5) Include organizations to instance TST(default)
6) Run ATP Data collection Program.
RCS is errored out with User-Defined Exception (Source Setup Objects Creation Requests did not complete Successfully) along with Collection Triggers/Views errored out with
Error with creating Source Triggers/Views
Is it my setup problem or patch I need to apply, if you could please guide ?
Thanks in advance.
AtanuFollowing are in log for them:
**Starts**03-JAN-2011 20:00:52
**Ends**03-JAN-2011 20:12:22
Error in creating Source Triggers
Start of log messages from FND_FILE
03-JAN 20:00:52 : Request : 5807365 :Creates Item Triggers used by Collections Process
03-JAN 20:00:52 : Request : 5807366 :Creates BOM Triggers used by Collections Process
03-JAN 20:00:52 : Request : 5807367 :Creates Routing Triggers used by Collections Process
03-JAN 20:00:52 : Request : 5807368 :Creates WIP Triggers used by Collections Process
03-JAN 20:00:52 : Request : 5807369 :Creates Demand Triggers used by Collections Process
03-JAN 20:00:52 : Request : 5807370 :Creates Supply Triggers used by Collections Process
03-JAN 20:00:52 : Request : 5807371 :Creates Other Triggers used by Collections Process
03-JAN 20:00:52 : Request : 5807372 :Creates Repair Order Triggers used by Collections Process
End of log messages from FND_FILE
***********************************AND that of Source Views details :**************************************************************
**Starts**03-JAN-2011 20:00:47
**Ends**03-JAN-2011 20:12:18
Error in creating Source Views
Start of log messages from FND_FILE
03-JAN 20:00:47 : Request : 5807356 :Creates Setup Views used by Collections Process
03-JAN 20:00:47 : Request : 5807357 :Creates Item Views used by Collections Process
03-JAN 20:00:47 : Request : 5807358 :Creates BOM Views used by Collections Process
03-JAN 20:00:47 : Request : 5807359 :Creates Routing Views used by Collections Process
03-JAN 20:00:47 : Request : 5807360 :Creates WIP Views used by Collections Process
03-JAN 20:00:47 : Request : 5807361 :Creates Demand Views used by Collections Process
03-JAN 20:00:48 : Request : 5807362 :Creates Supply Views used by Collections Process
03-JAN 20:00:48 : Request : 5807363 :Creates Other Views used by Collections Process
03-JAN 20:00:48 : Request : 5807364 :Creates Repair Order Views used by Collections Process
End of log messages from FND_FILE
Executing request completion options...
Output is not being printed because:
The print option has been disabled for this report.
Finished executing request completion options.
Concurrent request completed
Current system time is 03-JAN-2011 20:12:18
======================================================================
Thanks
Atanu -
Management Data Warehouse Data Collection fails due to login failure
Hello,
I am trying to set up a Management Data Warehouse on a server other than the one I want statistics of. Unfortunately, each upload fails because the data collector upload job cannot log onto the warehouse server. For some inexplicable reason the process is trying to log on using domain\serverName. Obviously no such user exists, and the process fails. Below is the error message I see in the logs:
Description: An error occurred with the following error message: "An error occurred while verifying the result set schema against the output table schema. The data collector cannot connect to the management data warehouse. : Login failed for user 'domain\server name$'.".
Any help would be greatly appreciated.
Thanks,
Zacharyhttp://technet.microsoft.com/en-us/library/bb677211.aspx says
The data warehouse is installed on a different computer from the data collector. Probable causes are network connectivity problems or an unavailable host server. This error only affects upload packages.
Handling: Because there is no advance notification about a server shutdown, this error cannot be anticipated and handled automatically. The error is logged and after a brief interval, the upload is restarted. After four unsuccessful upload attempts, the collection set is disabled and its state is written to the execution log.
Note:
Any data that is collected while the collection set is running is kept and accumulated. If the upload package can connect to the data warehouse, the accumulated data is uploaded.
Blog: http://dineshasanka.spaces.live.com -
Access 2010 InfoPath Data Collection Export Fails Due to Date Format That Includes Time Zone
I created an Access 2010 database that has multiple data collection (InfoPath) forms that were generated from Access and have been in use for about 1.5 years. Starting in 2013 (for about a week now), the submitted data fails to Export due
to a "data type conversion error" with the date fields. Prior to 2013, the date string returned in the InfoPath form looked like this: "2013-01-07T00:00:00", but now it looks like this: "2013-01-07T00:00:00-05:00". The time zone is appended
to the string and it kills the Outlook Export feature.
To test this, I created a new database with one table and one date time field. I generated an InfoPath template and emailed it to myself. I entered the date into the template and submitted it (tried manually entering the date as well as
using the date time picker control - made no difference). The InfoPath template now contains "2013-01-07T00:00:00-05:00" and will not Export from Outlook to Access. I tried manually pasting the string into the Access table and it would take it,
but would show "1/7/2013 5:00:00 AM" in the date time field (which isn't correct either but at least it took). Note: This problem has appeared at my office (Win 7 with Office 2010), but my testing was done on my personal laptop using Win 8 with Office
2010.
It looks like Microsoft has created a bug and now all of my data collection forms are unusable. Any help will be appreciated.Microsoft confirmed that the issue was introduced with MS12-066 as follows:
***Start Quote
We have been able to identify that this issue was introduced with the change made for the hotfix detailed in KB 2687395. This update was included in the security update MS12-066 when you installed KB 2687417.
2687395 Description of the InfoPath 2010 hotfix package (ipeditor-x-none.msp): August 28, 2012
http://support.microsoft.com/kb/2687395/EN-US
2687417 MS12-066: Description of the security update for InfoPath 2010 Service Pack 1: October 9, 2012
http://support.microsoft.com/kb/2687417/EN-US
Investigating workarounds I've only come up with using HTML forms or changing the datatype of the control to text.
***End Quote
My own testing also indicates that if you are using InfoPath with SQL Server, you may be able to change the Date/Time picker control in InfoPath to a Date only picker control (if the SQL Server data
type will support that). -
Data Collection Jobs fail to run
Hello,
I have installed three servers with SQL Server 2012 Standard Edition, which should be identically installed and configured.
Part of the installation was setting up Data Collection which worked with out problems on two of the servers, but not on the last where 5 of the SQL Server Agent Jobs fails.
The jobs failing are:
collection_set_1_noncached_collect_and_upload
Message:
Executed as user: NT Service\SQLSERVERAGENT. The step did not generate any output. Process Exit Code -1073741515. The step failed.
collection_set_2_collection
Step 1 message:
Executed as user: NT Service\SQLSERVERAGENT. The step did not generate any output. Process Exit Code -1073741515. The step failed.
collection_set_2_upload
Step 2 message:
Executed as user: NT Service\SQLSERVERAGENT. The step did not generate any output. Process Exit Code -1073741515. The step failed.
collection_set_3_collection
Step 1 message:
Executed as user: NT Service\SQLSERVERAGENT. The step did not generate any output. Process Exit Code -1073741515. The step failed.
collection_set_3_upload
Step 2 message:
Executed as user: NT Service\SQLSERVERAGENT. The step did not generate any output. Process Exit Code -1073741515. The step failed.
When I try to execute one of the jobs, I get the following event in the System Log:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider
Name="Application Popup"
Guid="{47BFA2B7-BD54-4FAC-B70B-29021084CA8F}" />
<EventID>26</EventID>
<Version>0</Version>
<Level>4</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated
SystemTime="2013-06-04T11:23:10.924129800Z" />
<EventRecordID>29716</EventRecordID>
<Correlation
/>
<Execution
ProcessID="396" ThreadID="1336" />
<Channel>System</Channel>
<Computer>myServer</Computer>
<Security
UserID="S-1-5-18" />
</System>
- <EventData>
<Data Name="Caption">DCEXEC.EXE - System Error</Data>
<Data Name="Message">The program can't start because SqlTDiagN.dll
is missing from your computer. Try reinstalling the program to fix this
problem.</Data>
</EventData>
</Event>
I have tried removing and reconfiguring the Data Collection two times using the stored procedure msdb.dbo.sp_syscollector_cleanup_collector and removing the underlying database.
Both times with the same result.
Below are the basic information about the setup of the server:
Does any one have any suggestions about what the problem could be and what the cure might be?
Best regards,
Michael Andy PoulsenI tried running a repair on the SQL Server installation.
This solved the problem.
Only thing is that now I have to figure out the mening of these last lines in the log of the repair:
"The following warnings were encountered while configuring settings on your SQL Server. These resources / settings were missing or invalid so default values were used in recreating the missing resources. Please review to make sure they don’t require
further customization for your applications:
Service SID support has been enabled on the service.
Service SID support has been enabled on the service."
/Michael Andy Poulsen -
Getting Error in Data Collection - FDPSTP failed due to ORA-23401
Hi All,
I am really new to ATP Setup and after referring to the Metalink notes, I have compelted the setups required to calculate ATP in Sales Order Window.
But when I am submitting the Data Collection which is the last step I guess, the program is ending with Error.
I am getting the error.
FDPSTP failed due to ORA-23401: materialized view "APPS"."MTL_OH_QTYS_SN" does not exist.
And because of this, when I am going to Sales Order to check the ATP, I am getting the error that Try Calculating ATP Again.
Please Help. Project is into a critical stage and I am stuck with this error.
With Regards,
Vishal MajithiaPlease mention the application release.
I am really new to ATP Setup and after referring to the Metalink notes, I have compelted the setups required to calculate ATP in Sales Order Window.What is the document you are referring to?
I am getting the error.
FDPSTP failed due to ORA-23401: materialized view "APPS"."MTL_OH_QTYS_SN" does not exist.Please see if these docs help.
Refresh Snapshot Errors With ORA-12034: Snapshot Log On "BOM"."BOM_SUB_OPERATION_RESOURCES" Younger Than Last Refresh [ID 180705.1]
How to Rebuild Source Snapshots Used in the Data Collection or Planning Data Pull MSCPDP [ID 148584.1]
Thanks,
Hussein -
All of the system data collection sets have been running for 6+ months without any issues, couple of weeks ago the 'Server Activity' collection set failed to restart after a planned maintenance server reboot.
When attempting to manually start the collection set it indicates "success", but after refreshing the collection set it showing as stopped. Viewing the logs for the Data Collection (Server Activity) I am getting the message:
Waiting on a kernel object(s) failed. Inner Error ------------------>
The handle is invalid.
After some research into this really unhelpful message I came across one posting where this error has been found to occur in SP1. We are running SP2 which include the fix so this shouldn't be the problem (ref http://connect.microsoft.com/SQLServer/feedback/details/585210/sql-server-2008-data-collection-execmasterpackage-timeout).
To see more detail on the root cause of the error I enabled the additional tracing for data collection (http://blogs.msdn.com/b/sqlagent/archive/2011/07/13/enabling-additional-tracing-for-data-collector.aspx). This provided an exception stack which indicated
that the issue was thrown to what looks like an existing file, referring to a location (e:\) which doesn't exist in our system.
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: wmain _IN
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Command line: dcexec -c -s 2 -i "S160OLTP\OLTP" -m 0 -e 0x09C1635DD4C4C6478A145D679AFE718F_1_STOP
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Application::Init _IN
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Console code page (m_codePage): 437
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Application::ParseCommandLine _IN
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Application::ParseCommandLine _OUT:00000000
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Application::Init _OUT:00000000
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Application::Main _IN
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Started continuous mode collection on thread 12036
DCEXEC!26d0!2f04!2012/11/28!11:17:25:: StartCachedCollectionWrapper _IN
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Waiting for collection to exit or stop event to be signaled
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: StartCollection _IN
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: StartCollection(iSetId = 2, iCollectionMode = 0, pwszInstanceName = S160OLTP\OLTP)
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CDataCollectorController::ExecuteCollectionSet _IN
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: SQL Instance Name: OLTP
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CDataCollectorController::TryExecuteCollectionSetOnce _IN
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CDataCollectorController::Initialize _IN
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CDataCollectorController::Initialize _OUT:00000000
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CDataCollectorController::PopulateCollectorPackageParameters _IN
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CacheWindow=1, CacheDirectory='I:\MSSQL10.OLTP\MSSQL\dccache'
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CDataCollectorController::PopulateCollectorPackageParameters _OUT:00000000
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CDataCollectorController::PopulateSetPackageParameters _IN
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CollectionSetUID='{49268954-4FD4-4EB6-AA04-CD59D9BB5714}', ExecutionMode=0, IsSystem=-1, LoggingLevel=0, DaysUntilExpiration=14, ExitEventName=''
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CDataCollectorController::PopulateSetPackageParameters _OUT:00000000
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CreateControlEvents _IN
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: e ERROR: Win32 Error: GetLastError=183, retCode=0x4, function CDataCollectorController::CreateControlEvents, line 470, file e:\sql10_katmai_t\sql\mpu\shared\dc\runtime\controller\src\datacollectorcontroller.cpp
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: e ERROR: Failed to create kernel event for collection set: {49268954-4FD4-4EB6-AA04-CD59D9BB5714}. Inner Error ------------------>
Cannot create a file when that file already exists.
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CreateControlEvents _OUT:00000000
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: e ERROR: DC_FAILED: function CDataCollectorController::TryExecuteCollectionSetOnce, line 350, file e:\sql10_katmai_t\sql\mpu\shared\dc\runtime\controller\src\datacollectorcontroller.cpp
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CDataCollectorController::TryExecuteCollectionSetOnce _OUT:0x000004
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: Collection set execution failed, retrying in 5 seconds...
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: Waiting for exit event or retry timer failed.
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: e ERROR: Win32 Error: GetLastError=6, retCode=0x4, function CDataCollectorController::ExecuteCollectionSet, line 278, file e:\sql10_katmai_t\sql\mpu\shared\dc\runtime\controller\src\datacollectorcontroller.cpp
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: e ERROR: Waiting on a kernel object(s) failed. Inner Error ------------------>
The handle is invalid.
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CDataCollectorController::ExecuteCollectionSet _OUT:0x000004
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: StartCollection _OUT:00000000
DCEXEC!26d0!2f04!2012/11/28!11:17:25:: StartCachedCollectionWrapper _OUT:0x000004
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Collection thread returned (00000001)
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Waiting for collection thread to exit
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Collection thread signaled
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Application::Main _OUT
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: wmain _OUT:0x000004
I am now stumped as I haven't found anyone else experiencing this issue.
Any ideas, please help??Thanks for the pointer Eileen, problem solved.
Can't believe I missed it, but after reading the last section on system hangs it occurred to me that I hadn't checked that all dcexec.exe processes were killed when I disable the data collection service.
For anyone else experiencing this issue I identified the dcexec.exe processes using the following in cmd line:
TASKLIST /SVC /FI "IMAGENAME EQ DCEXEC.EXE"
On the default setup of the data collection there should be two dcexec.exe processes constantly running, one for "Server Activity" and another for "Query Statistics". On our server there were five running with the data collection disabled.
After killing all of the processes and restarting the data collection problem solved!!
Still need to understand why the processes didn't shut down cleanly when the server was restarted, but at least I know where to look now. -
Data Collection -- Planning Data Pull process failed
Hello Experts,
I am having a problem with data collection, the result of Planning Data Pull was completed error. It seems the problem is on the Planning Data Pull Worker.
I am using 2 worker to run Planning Data Pull, and both result was errors. Below are some of the errors log:
16-MAY 19:11:34 : Procedure MSC_CL_SETUP_PULL.LOAD_CALENDAR_DATE started.
Into populate_rsrc_cal
16-MAY-2011 19:11:40
APS string is Invalid, check for Error condition
16-MAY 19:11:40 : Error in Routine GMP_CALENDAR_PKG.POPULATE_RSRC_CAL.
16-MAY 19:11:40 : User-Defined Exception
16-MAY 19:11:40 : User-Defined Exception
16-MAY 19:11:40 : Error_Stack...
16-MAY 19:11:40 : ORA-06510: PL/SQL: unhandled user-defined exception
16-MAY 19:11:40 : Error_Backtrace...
16-MAY 19:11:40 : ORA-06512: at "APPS.MSC_CL_PULL", line 6218
ORA-06512: at "APPS.MSC_CL_PULL", line 1583
Help me please.
Thanks & Regards,
AndiThis error shows up when it cannot find any organizations.
Use the sqls below to identify this
1. select MSC_CL_PULL.get_org_str(&instance_id) from dual ;
2. select instance_code, instance_id from msc.msc_apps_instances where instance_code='&instance_code'
3. select * from apps.msc_instance_orgs where sr_instance_id= &instanc_id
sql 1 should in principle return the orgs available. If this returns null or -9999, then it's an orgs problem
sql 3 will show the available orgs.
If the organizations are enabled for planning in the ASCP instances form, then run a targeted refresh for trading partners (suppliers/customers/orgs). If this works with no errors, then look at the table msc_trading_partners. It should contain records for the orgs with partner_type = 3 -
Data Collection job collection_set_2_upload failed
We had a standalone server which was SQL server 2000 R2. I had configued the Data Collection job and uploded the data into our Management Data Warehouse. It had worked fine. One week ago, the standalone server was re-built and
then I found that all 4 jobs didn't work.
collection_set_2_collection
collection_set_2_upload
collection_set_3_collection
collection_set_3_upload
I re-configured both Management Data Warehouse and Data Collection. Now the two collection_set_2_collection and collection_set_3_collection worked fine. However the two collction_set_2_upload and collection_set_3_upload didn't work with an error "the
step did not generate any output". I cleaned up all DataCollectorCache files on the standalone server but the error stayed.
Any idea? Thank you for any kind of suggestion.
Charlie HeHi Charlie,
Based on my understanding, you configured Data Collection job. Then two upload jobs didn't work with an error "the step did not generate any output". And error also existed after cleaning up Data Collector cache files.
New data cannot be uploaded to the Management Data Warehouse database when one or more Data Collector cache files are corrupted. The corruption may be caused for one of the following reasons:
Data Collector encountered an exception.
The disk runs out of free space while Data Collector is writing to a cache file.
A firmware or a driver problem occurs.
So I suggest you double check if Data Collection cache files are cleaned up completely. For more information, please refer to this kb:
http://support.microsoft.com/kb/2019126.
If issue persists exist, please check the agent job history to find the error log around the time issue caused. It would be better if you could provide detail error information for our further analysis. About how to check agent job history, please refer
to this link:
http://msdn.microsoft.com/en-us/library/ms181046(v=sql.110).aspx.
Best regards,
Qiuyun Yu -
WJA - Failed Alerts - Data Collection Inaccuracies
I have been running Web Jetadmin v10.2.7491B on a 2003 server for about 3 years. There are 120 managed printers consisting of 9 different models.
Issue #1
Initially I had alerts configured on all printers that would send an email when a consumable dropped below 3%. This worked very relibly for the first year. Over time, an increasing number of printers stopped sending reports, until eventually only a handful sent alerts. I never found the cause of this problem.
Issue #2
Since alerts were broken, I setup a daily data collection for all printers and a morning csv report sent via email. I would then sort the data by remaining consumable percentage and replace those at 1% or below. Recently, 3 models out of 9 have stopped reporting accurate consumable percentages in the daily reports. This problem seems to correspond with a firmware update I pushed out to all printers. The WJA console DOES show accurate information for individual printers when they are selected.
Steps taken to resolve #2
Printers have been removed from the all Report Data Collection groups, and then added back. This did not resolve the issue. Printers were initially added individually to a Data Collection, but I have implemented a Group Policy that automatically adds a printer to the Data Collection. 6 printer models still show accurate percentages, but models 4345, 4730, and 5035 do not.
Is there a database file I can delete that will force a Data Collection rebuild for all printers? Is it possible the new firmware for the 3 listed models has a bug that prevents the data from being updated?
This question was solved.
View Solution.This forum is focused on consumer level products. For this issue you may have better results posting in the Enterprise Print Servers, Network Storage and Web Jetadmin forum here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
Performance Report Manager Data Collection Issues
I have an agent running and collecting data in a circular file.... history.log
Data Collection has failed approximately 6 days ago without warning. I have tried to find out the issue and have not had any success.
If I open the Data Collection Window in PRM I see a Yellow triangle beside the hostname:port.
If you can provide any information as to what to look for, please reply.history.log may be corrupted. If you run it through ccat to flatten it does it show any recent (i.e. newer than 6 days) entries?
If ccat gives errors then just move it out of the way (i.e. rename it to history.log.busted) and restart your Agent. A fresh log will be created. Give it a couple hours to make a couple flushes of data to your SunMC Server and see if PRM works.
Regards,
Mike
[email protected] -
Oracle Grid Data Collection Stopped
Hi Everyone,
My Environment details:
Oracle Grid 10g 10.2.0.5.0
Oracle Database 10g 10.2.0.4.0
OS -Redhat Linux 5.4 x86_64
Today i tried to take the awr from Grid console for one of my database but there are no recent snapshot available and the data collection is stopped between agent and database. Please find the error details from emagent.trc
when i checked the agent services its seems running fine but i don't know why the data collection is not happening.
Please advice me how to resolve this issue.
Thanks & Regards,
Shan
SQL = "/* OracleOEM */
DECLARE
instance_number NUMBER;
task_id NUMBER;"...
LOGIN = dbsnmp/<PW>@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=netwon-vip.teleglobe.com)(PORT=1522))(CONNECT_DATA=(SID=newton)))
2011-12-30 16:41:01,541 Thread-3958328240 ERROR fetchlets.sql: ORA-06550: line 11, column 8:
PL/SQL: ORA-00942: table or view does not exist
ORA-06550: line 10, column 1:
PL/SQL: SQL Statement ignored
ORA-06550: line 27, column 41:
PL/SQL: ORA-00942: table or view does not exist
ORA-06550: line 26, column 2:
PL/SQL: SQL Statement ignored
2011-12-30 16:41:01,541 Thread-3958328240 ERROR engine: [rac_database,regiprd,latest_hdm_db_metric_helper] : nmeegd_GetMetricData failed : ORA-06550: line 11, column 8:
PL/SQL: ORA-00942: table or view does not exist
ORA-06550: line 10, column 1:
PL/SQL: SQL Statement ignored
ORA-06550: line 27, column 41:
PL/SQL: ORA-00942: table or view does not exist
ORA-06550: line 26, column 2:
PL/SQL: SQL Statement ignored
2011-12-30 16:41:01,541 Thread-3958328240 WARN collector: <nmecmc.c> Error exit. Error message: ORA-06550: line 11, column 8:
PL/SQL: ORA-00942: table or view does not exist
ORA-06550: line 10, column 1:
PL/SQL: SQL Statement ignored
ORA-06550: line 27, column 41:
PL/SQL: ORA-00942: table or view does not exist
ORA-06550: line 26, column 2:
PL/SQL: SQL Statement ignoredLog onto the database using SQL*Plus, run the following statements, and post the output.
SELECT owner, object_type, COUNT(*)
FROM dba_objects
WHERE status = 'INVALID'
GROUP BY owner, object_type;
SELECT comp_id, version, status
FROM dba_registry; -
Problem Topology Data collection LMS 4.1
Hi there,
I have an issue with the lms 4.1 Topology Data Collection. In the Topo Data Collect under Inventory > Dashboards > Device Status > Collection Summary, there are only 2 devices succeeded and 0 device fail. but I have more 500 device in state managed. I run Inventory Collections but the number doesn't change.
Inventory Collection 534 13 02 May 2012, 11:07 CEST Idle Schedule
Config Archive 507 14 02 May 2012, 09:51 CEST Running Schedule
Topology Data Collection 2 0 02 May 2012, 11:11 CEST Idle Schedule
I have read others discussions but no one has the same problem or similar problem. The only possible solution is to reset the ANI db but I'm not sure if it it's the best solution.
Any ideas?
Thaks for helpI confirm that Martin. Good spotting!. I just noticed it in a server I installed yesterday. These 2 lines were added to the hosts file.
127.0.0.1 localhost
127.0.0.1 LMS4
A bit silly for both, since these entries were allready in the hosts file, done by the windows install I think
127.0.0.1 localhost
::1 localhost
Cheers,
Michel
Maybe you are looking for
-
Part 2 : can i create an instance of ArrayList ?
Hey thanks so much for the reply. Let me tell you the exact scenario. I'm actually developing a struts-application. Hope I can get some help here too. I have: 1. login.jsp-where user logs in. -I have a userid and a password as default values for each
-
Is there a way to throw multiple jbuttons in an array?
I know in Visual Basic you could add controls into an array which was better on performance plus it cut down on code quite a bit. I was wondering if there's an array to group jbuttons, jlists, etc. in Java? I know you can with regular classes but I g
-
Read XML function for Microprocessor SDK
From reading the LabVIEW Microprocessor SDK known issues list (http://digital.ni.com/public.nsf/allkb/B5E8F0B663417AB8862574600058459E) it seems that any File I/O functions (and therefore "read xml") are unsupported for targets other than Windows/Uni
-
I upgraded from CS4 to CS6, how do I get my CS4 extensions ?
I recently upgraded from DW CS4 to DW CS6, but I can't see my DW extensions in CS6 ? How do i get to them ? Will I need to reinstall from scratch ? Thanks in Advance.
-
Safari on Windows - proxy issues
Safari on Windows XP uses the same proxy settings that Chrome and IE use. Both Chrome and IE work fine, not Safari. Any Idea ? Thank you. OS: Windows XP 32 bits Safari 5.1.7.