Data collection task in Update mode is not posible with Original list

Hi Friends,
When I try to Execute the Task for data collection in sa38.I am getting the Error with in 9 sec.
UPDATE MODE IS NO POSSIBLE WITH ORIGINAL LIST
Message No. UCS0111
Diagnosis :
If you select the indicator"original list"the current task status is ignored.In this case,the system simulates a task run in with all of the organisational units are not yet blocked.Thus,setting this indicator is meaningful and valid only if the task is executed in test mode at tthe same time.
procedure : select the original list & Test run together.
My problem is I can not select the Test run in production server.
Can any one please help me to solve the Issue.

I Thank you all for Responding to me.
Hi Dan,
SA38 provides all the needed parameters- Con.Group,Company,Version,Fis.Year,Period,Group currency.
Iam trying to run the task with SA38 for Data Collection.
Hi Lucio,
When I Check the Fields Both the Log & Original list . The programe gives an error message "UPDATE MODE IS NOT POSSIBLE WITH ORIGINAL LIST"
Even when I tried with Log,Test Run & Original List Iam getting the Same error Message "UPDATE MODE IS NOT POSSIBLE WITH ORIGINAL LIST"
I can run the task Successfully with selecting the Log option only. But my Client need to Use both Log & Original list ( as they used to run in BIW 3.5 ) Now it we are using BI 7.
Hi Christopher,
We are running the programe UCBATCH01,with the T code SA38.
Hi Eugene,
I will look in to the link and i will Discuss with the Basis team.
Once again Thank you all for responding
Suraj.

Similar Messages

Data Collection task error (Item is not defined in Cons Chart of Accts 01)

Dear Experts,
While executing Data collection task, I am getting error "Item is not defined in Cons Chart of Accts 01", What could be the reason?
(Many Items are getting collected in target, but at the topline this error is been shown)
Regards
Ritesh M

Thans Dan,
I have gone in the program UGMDSYNC, and getting few Gls which have not assigned Cons Chart of account.
Kindly tell me how to assign chart of account to these GL account?

Data collection task execution in UCMON

Dear Friends
I am using flexible upload method and load from data streams for data upload. Both methods are assigned to my data collection method which in turn is assigned to the task. When i execute the data collection task in consolidation monitor the system executes only the load from data streams and does not give me the option of selecting the method to execute.
To differenciate it i created a new task and assigned only flexible upload method and when i execute this task the system still executes the load from data streams method.
Can anyone guide me as to where i am going wrong?
Cheers
Shivkumar

Hi Mani
I could not follow what you meant to say
"I have done same what u describe, but do not have the issue. Create seperate method for data steam and FU. Then merged both in one method and assigned such method to one task and no issue.. I face that u described,
Can you assign the method to the task, starting from the same starting period and check again."
Do you mean to say that you did whatever i am doing and you too faced the same problem. But the strange behaviour of the system is when i execute it in "Execute with selection screen" mode the system shows all the methods, however if i run it in update mode the system executes only the "Load from data streams" even if the "Flexible upload" method is assigned.
BTW where do you set the validity for a task?
Cheers
Shivkumar

Consolidation Group in Target Cube (Data Collection Task)

Dear Experts,
In consolidation Monitor, While doing Data Collection task via Load from Data Stream, after doing Updation, WHen I see the content of Target InfoCube in RSA1, In GL account Line item I do not get COnsolidation Group Value.
Like
GL account Company CCode Cons Group Currency PV LC PV GC
100000 3000 3000 (Blank) USD 1000 44000
1) Is it necessary to Have Value in Consolidation Group?
2) If Yes, What is the utility and how to get value in this column.?
Regards
Ritesh M.

No, ConsGoups are determined later, during the ConsGroup-dependent tasks.

ECCS : Data Collection tasks

Hello Gurus,
I want to customize my system so that manual entries tasks, flexible upload and rollup tasks are the ONLY available tasks into the "Data Collection task".
However, the system default an option called "Additional financial data" where "supplier data" can be imported whereas I did not customize anything about this option. I don't find the solution to delete this option into my "data Collection task" layout.
Do you have any solution for me?
Thank you in advance for your help
Best regards
Pascal

Hello Dan and thank you for this first reply,
- For "data collection" task group I don't have the possibility to define the tasks to be used or not (the system apply his logic depending on different custo parameters).
- Regarding the "profit-in-inventory" option into the dimension, the system only gives the options to set the product group usage as as an independent characteristic or existing custom characteristic but there is no option that indicates the profit-in-inventory as not being implemented...
Is there anything else I should check? If yes, could you please give me more details?
Thank you in advance for your help
best regards
Pascal

IPod updates 2 touch with the new software, and from the update they are not connected with Time phase. They appear calling but never they enter the calls. I make calls with other users and if one connects but in these two not from the update

iPod updates 2 touch with the new software, and from the update they are not connected with Time phase. They appear calling but never they enter the calls. I make calls with other users and if one connects but in these two not from the update

I use Firefox 95% of the time, and there's no problem with flash content (and I'm still at .55 - downloaded .64 last week but I haven't got round to making the change yet). At the rate they've been changing it recently it may well be out of date already .
I've been trying it in Safari, too with no problems apart from You Tube, but that's because I'm blocking Google cookies.
One thought does occur - if your Flash preferences are set to block all Local Storage, it may be that the problem site is trying to use Flash cookies (LSOs). I had this problem recently with the BBC iPlayer streaming content. Little Snitch notified an attempt to connect to a new URL - emp.bbci.co.uk.
If I disallowed it, no streaming; when I allowed the connection, it still wouldn't stream, so I did a bit of digging and came to the conclusion that it was trying to set a Flash cookie. When I unblocked, lo and behold - streaming resumed as normal.
I now have LSOs blocked in a more subtle way that lets the site think it's being set (but it ain't) and the streaming still works.
As for permissions repair - always repair from local; the permissions on the original disc will have been superceded by updates and new installations of Apple software.
DU needs to be reading the packages on the HD, not the (now out of date) install disc.
The recurring repair messages are normal and don't mean anything's wrong. As long as the final message is 'repair complete' there's no need to dwell on it.
http://support.apple.com/kb/TS1448 (for Leopard and Snow Leopard - Lion no doubt has it's own set).

Updated Firefox is not compatible with my low vision software - Zoomtext. How can I get Firefox to stop asking me to upgrade!!

Currently using version 3.6.27 as the updated versions are not compatible with my low vision software called Zoomtext. I constantly get Firefox asking me to upgrade. How can I get it to stop asking me to upgrade. (I have tried each upgrade and they are all incompatible with Zoomtext.

Go to '''Options''' window > '''Advanced''' panel > '''Update''' tab > '''Firefox updates '''> click '''Never check for updates (not recommended: security risk)''', click '''OK''' to save it, exit firefox and restart it.
see for more info: [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Advanced%20panel#w_update-tab Options window - Advanced panel - Update tab]
BUT you see the warning : Warning: If you select this option, you will not receive '''critical security updates that may keep you safe online''' unless you frequently do a '''manual check for updates'''.
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

When i do update to my iphone my pc shut down and dont finish update and now not connect with my pc

when i do update to my iphone my pc shut down and dont finish update and now not connect with my pcm just show (my iphone ) connect with itunes

Try this:
http://support.apple.com/kb/HT1808
Regards.

When I try to charge my iphone there is a message with an yellow triangle saying: recharging is not posible with this kid odf acessory. I want to know if the trouble is in the charger or in the phone.

When I try to charge my iphone a message appears saying: This recharging is not posible with this kind of acessory and an yellow triangle. I don't know if the troble is in the charger or in the cel phone. There is someone who can help me?

Hi marmello,
If you are having a charging alert message on your iPhone, you may find the following article helpful:
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Regards,
- Brenden

After 3.6.4 update, FF will not open with imacros addon enabled.

After 3.6.4 update I can no longer run FF with the imacros addon enabled. Imacros has not released an update yet. How can I revert back to 3.6.3 until they do update? Or are there any other suggestions?
== This happened ==
Every time Firefox opened
== after 3.6.4 upgrade

Mathias,
Thank you for helping me (any so many others) back up and running :)
PS - Allowed my desktop (old pentium 4 running winxp) to update to FF3.6.4 and it worked just fine without the updated iMacros. Not sure what is different between the 2 machines, but figured you might like to have the info.
Tommy

Hdr photos not aligning with original non-hdr image iPhone6

Why are hdr photos not aligning with their original non-hdr source image in iPhone6? I've found that when I overlay the two in gimp, there's a misalignment of several pixels. Previously with my iPhone4 on iOS7 both the original image & its corresponding hdr version always aligned perfectly so I could easily make adjustments between the two versions to create the final image I wanted. Has anyone else noticed this discrepancy?

I figured out the answer.
It turns out I had accidentally enabled the 'chrome' filter on all of the pictures I was taking. The icon with the 3 overlapping circles at the bottom right in the camera app were in color, indicating I had a filter on. Another thing I was not aware of oops.
That is why my pics all seemed to have extra contrast. The chrome filter was close enough to the original that I thought it was actually HDR, being unfamilar with how HDR should look.
If I had set something like black and white as a filter I would have realized what was going on sooner.
I also figured out that HDR was actually saving both of my photos. Scanning through my library I found a few duplicate images. As mentioned above, the HDR version has a little rectangular icon with 'HDR'.
Sorry for the confusion and I hope this helped somebody!
Thank you for your courage

Updated image is not continuing with the State Restore Phase

MDT 2010 Update 1
Our MDT guru quit about a month ago.   I've done basic stuff here and there
But have never updated an image..
1. I deployed our current image to a Vmware workstation. Added about 200 updates. Nothing else done.
     I than rebooted and logged in as local admin and ran litetouch.wsf in a command prompt.
     And ran the "Sysprep and Capture image" task sequence.
     This sysprep'd and imaged with no errors to the captures folder.
2. I than moved that updated image to the "Operating Systems" folder on the deployment share. Renamed the old .wim file and renamed the new one to be the same as the old one..    (Not completely sure this is the correct
way to do this) But couldn't find any info on how this is done)
I than proceeded to reimage a machine with the updated .wim.
It gets all the way to the State Restore phase and just stops.   After the final reboot. I logon with the local admin account as usual and it does not continue.   the Minint and _SMSTaskSequence folder are still there.. If
I let it set for hours nothing happens...
I compared the BDD.log file for both images.    They seem to be identical up until the State Restore phase is supposed to start.
I see NO errors in the BDD log file...
So I am lost as in what to do to try and remedy this issue..
Info From Sharepoint

Its the new WIM that is not continuing...
I did try the import.   and it did the same thing.
here is the ending of the BDD.log file
ZTIConfigure COMPLETED. Return Value = 0   ZTIConfigure   4/22/2014 12:00:53 PM   0 (0x0000)
ZTIConfigure processing completed successfully.   ZTIConfigure   4/22/2014 12:00:53 PM   0 (0x0000)
Microsoft Deployment Toolkit version: 5.1.1642.01   ZTIdrivers   4/22/2014 12:00:53 PM   0 (0x0000)
The task sequencer log is located at X:\windows\TEMP\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log.   ZTIdrivers   4/22/2014 12:00:53 PM   0 (0x0000)
Write all logging text to \\bimaemg1mdtx64\deploymentshare$\MININT-C1QJ4FN   ZTIdrivers   4/22/2014 12:00:53 PM   0 (0x0000)
Validating connection to \\bimaemg1mdtx64\deploymentshare$\MININT-C1QJ4FN   ZTIdrivers   4/22/2014 12:00:53 PM   0 (0x0000)
Already connected to server bimaemg1mdtx64 as that is where this script is running from.   ZTIdrivers   4/22/2014 12:00:53 PM   0 (0x0000)
No driver copying needs to be performed during the Lite Touch postinstall phase.   ZTIdrivers   4/22/2014 12:00:53 PM   0 (0x0000)
Updating downlevel OS configuration.   ZTIdrivers   4/22/2014 12:00:53 PM   0 (0x0000)
Vista identified, skipping update of Device Path   ZTIdrivers   4/22/2014 12:00:53 PM   0 (0x0000)
ZTIdrivers processing completed successfully.   ZTIdrivers   4/22/2014 12:00:53 PM   0 (0x0000)
Microsoft Deployment Toolkit version: 5.1.1642.01   ZTINextPhase   4/22/2014 12:00:53 PM   0 (0x0000)
The task sequencer log is located at X:\windows\TEMP\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log.   ZTINextPhase   4/22/2014 12:00:53 PM   0 (0x0000)
Write all logging text to \\bimaemg1mdtx64\deploymentshare$\MININT-C1QJ4FN   ZTINextPhase   4/22/2014 12:00:53 PM   0 (0x0000)
Validating connection to \\bimaemg1mdtx64\deploymentshare$\MININT-C1QJ4FN   ZTINextPhase   4/22/2014 12:00:53 PM   0 (0x0000)
Already connected to server bimaemg1mdtx64 as that is where this script is running from.   ZTINextPhase   4/22/2014 12:00:53 PM   0 (0x0000)
Property PHASE is now = STATERESTORE   ZTINextPhase   4/22/2014 12:00:53 PM   0 (0x0000)
ZTINextPhase COMPLETED. Return Value = 0   ZTINextPhase   4/22/2014 12:00:53 PM   0 (0x0000)
ZTINextPhase processing completed successfully.   ZTINextPhase   4/22/2014 12:00:53 PM   0 (0x0000)
Property DestinationLogicalDrive is now =    LiteTouch   4/22/2014 12:00:53 PM   0 (0x0000)
LTI initiating task sequence-requested reboot.   LiteTouch   4/22/2014 12:00:53 PM   0 (0x0000)
Info From Sharepoint

How to extract data from ORCL GL in "full" and not "delta " with FDM ERPI?

Hi
I am using FDM ERPI 11.1.2.1 to extrct data from Oracle eBS 11.
I can see that FDM ERPI extracts data in "delta mode" using the GL_TRACK_BALANCES_DELTA (FDM adds a row in this table after the 1st load of the period").
Is it possible to force the "full mode" in order to reload all the data from Oracle GL for each FDM data load?
Because I don't know why, but I have each month rows which are not imported into FDM.
thanks in advance for your help
Fanny

Hi
I had see that I have to install the FDM 11.1.2.1.502 patch in order to see this option in my ERPI adapter options.
I have passed this patch.
So I have the ERPI-FIN-C1 adaptor.
I can see a new option (Time Out Value) but no "Load Data" or "Execution mode" option :-(
Any idea of where the problem come from?
Fanny

Ipod will not update and will not sync with photos

I had a 5th gen 60gb ipod video that died and was switched out for a new one at the apple store. now when i plug it into my powerbook G4(667) it keep coming up with a window stating (can not update , error code -208) I've taken my ipod to apple store and it was working fine on thier machine. but can not get it working on mine. reinstalled itune, ipod up to date. it will not sync up with my photos and will not load some of my mp3 files. tech support hasn't helped much. tried few options with preference but still not working.

I just needed to move some files around!

I am a PC user using 3 PCs w/ iTunes Match. 2 of my PCs sync fine, but my new PC (used to remove duplicates, cover art, update playlists) does not sync with Match. Whats the problem?

So, to begin I own 3 PCs and the latest iPad/iPhone running iTunes on all 3 PCs. For simplicity, I will refer to the PCs as old, laptop, and new.
My laptop was my primary PC which i used to set up iTunes match. The old PC had all of my music files which have appeared to have been uploaded to Match. Note that I had already transferred most (if not all) of the music to my laptop but I enabled match so that I could download new files to my old PC. Note that I did quite a bit of cleaning, retagging, and ordering files and that I was told by Apple that Match would recognize duplicates, and as such, would not upload these files to the cloud in Match (this does not appear to be the case, however). My laptop PC (originally set up on Match) indicates there are alot of files in the clould (Match) to download. These seem to be duplicate files which were already cleaned on the Laptop and were uploaded on the old PC machine. Thus, it appears that Apples matching alogorythm is not strong enough to detect minor differences (i.e. cover art) in files and decides to upload them anyway (quite annonying if you ask me).
Now, to my problem; I purchased a new PC and have been removing the last duplicate songs, updating cover-art, playlists, among other things. My new PC (which I will refer to as "new") is not recognized by iTunes Match. I have tried uninstalling each app associated with iTunes, starting fresh with a new playlist and library to no avail.
Has anyone else had this problem? Apple Care does not seem to have much knowledge about Match, which is a bit frustrating. All I wish to do is tell Match that my New PC should be the primary PC which will be used to deliver playlists, music, etc since the other 2 machines have many duplicates and the playlists have errors within them. I thought about these solutions (none of which are no appealing) 1) using the laptop as my primary iTunes Match PC since this was the PC Match was created on (this would require rebuilding playlists and removing a massive amount of duplicates, again), 2) creating a new iTunes Match account based on my New PC (basically starting over), 3) forgetting Match all together and going back to the old school store & sync.
Anyone have better ideas or experiencing similar issues? Any thoughts would be appreciated. Thx!

After going by elimination to isolate if the problem was from (1) iTunes app, (2) my computer or (3) my old iPhone 4G, I figured out what my problem was.
1) First I deleted & reinstalled iTunes on my Windows PC without succes, my playlist did not changed on my iPhone.
2) I tested a successful #sync from the iMac at work.
So my conclusion is: The hard drive on my Windows PC is full and that is affecting iTunes SYNC functionalities.
So I'll do a back-up then run a "Clean Install" of my Windows OS, hoping that it will fix my SYNC problems.

Data collection task in Update mode is not posible with Original list

Similar Messages

Maybe you are looking for