Data connection keeps disappearing in Stamina mode

I'm in the UK on the Three network. I am using Stamina mode with Extended usage enabled to save power, but am seeing a consistent issue where, after an hour or two, the phone completely loses it's mobile data connection and will not reconnect without rebooting. This makes Stamina mode totally useless as it is not reconnecting when the screen is turned on.
The signal indicator on the phone shows no "H" symbol when this happens, yet About -> Status indicates HSPA is present but mobile data is disconnected.
I have the latest firmware installed.
Solved!
Go to Solution.

You may need to perform a software repair using PC companion.The process will erase all internal memory.You might need to charge your device for about 1-2 hours before so the device has at least 60% battery.
Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Similar Messages

Wireless connection keeps disappearing on ibook

I have an iBook G4, along with a PC laptop. Recently I've had to reconfigure the iBook network configurations almost every time after the computer has gone to sleep. It's not difficult to do, but it is annoying. The only thing that I can think is that I recently upgraded to Leopard (10.5.8). Does anyone know whether there is a glitch with Leopard that's causing me to lose my network connection?

I actually have the same problem that Hunter has. It is extremely frusterating to see the wireless connection work so well one minute then the next it does't work. I have the same model and version Router that he has. My laptop works perfectly on other wireless networks (at school, friends houses, etc.) but not here in my own house. When my friends bring their laptops over here, they don't seem to have a problem holding onto a connection with my network. Their laptops work perfectly but not mine. I recently ran a diagnostics scan on my network and this is what I got... 00000012] Intel(R) PRO/Wireless 3945ABG Network Connection (FAILED),DefaultIPGateway = 192.168.1.1(Same Subnet) (FAILED) Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time=4ms TTL=4
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 192.168.1.1:
Packets: Sent = 4, Received = 1, Lost = 3 (75% loss)
Approximate round trip times in milli-seconds:
Minimum = 4ms, Maximum = 4ms, Average = 4ms.
DNSServerSearchOrder (FAILED)
If anyone knows what I can do to fix this issue I would love to know. I've heard things about downloading firmware, I tried that but couldn't get it to work because it was in a BIN file and im not sure what program to use to extract that file.....Thanks
Message Edited by importraceram on 05-08-200703:58 PM
Message Edited by importraceram on 05-08-200703:59 PM

4G LTE connection keeps disappearing?

Hi, I just got a stratosphere phone about two weeks ago, and at some point the mobile network disappeared. All I see is bars instead of 4G or 3G icon on top. I called the customer service and they told me to reset the phone, and after that it worked for about an hour and then 3G changed to 1x, and then all I see is bars again. This is really frustrating, how do i get my mobile network back? I was excited about finally getting a smart phone, but this is useless without mobile network. Can somebody help me?

I have the same problem with my phone. sometimes it shows up and sometimes it doesn't. It's very
frustrating paying for the data and not being able to get into the network area really sucks
if i could i would give the phone back had it for almost 2 months and i'm disgusted. I also can't receive text messages with
pictures that just started happenind do you have that problem also

Network connection keeps changing after sleep mode

I bought a brand new iMac for my mom just over 2 months ago and have been having internet connection problems. Sleep is set manually going under Apple and hitting sleep. Every time it's woken up after sleep the internet connection is gone and has to keep manually being switched to our network name which is quite frustrating. Tried this fix found on an old link on here: http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conten t=FaceBook
and it didn't work. All the threads I found were from 2010 or 2012. Just wondering if there is a recent fix on here.

Welcome to the forums!
Only if it's Ethernet, not Airport/Wireless, because the radios are shut down to save energy.

Dat job keeps running in stealth mode

Hi
can anyone help me with this very bizzare ( may be normal ) issue.
we started a job to load data from R3 using IP.
After 4 hours I notice lots of data being pulled and everything looks fine.
Then I get a request to kill the job.
I look into R3, sm37, the job is not there ( should have been under BIWremote ).
I look into R3 sm66, sm50, nothing from BI server.
I look into sm37, sm50 and sm66 in BI server. Nothing there.
yet the records count continues to increase in RSMON and the status stays yellow.
How to find and stop that freakin job........please help if you can.
thanks.

Hi,
Please check the load status in RSMO -->select the load --> goto the details tab -->check DATA selection ended in Extraction messages.
If you don't have the DATA selection ended in Extraction messages in details tab of load monitor .i.e..
data load extraction not ended or it is still running or It is missed some TRFC's.
To check the above please follow .
1.Jus take the load request from rsmo like ''REQU.......'' and take this reqest then goto SOURCE SYSTEM give t.code SM37 check BIREQE....."(copy the req). If you have this request it is still running.
2. if it is completed then check any PSA Process for load in BI system.
3. if the PSA Process couldn't find then check the TRFC;s
I think you can trace your load status through avove .
Regards,
Krishna.

Lower case edge / data connection refused on BB 8800

Hello, I need help to activate the data service.
I have a new unlocked T-Mobile BBerry 8800 bought from eBay.
When I inserted a sim card took from my Pearl 8100 it says data connection refused.
I upgraded the OS and now the version 4.2.1.101 platform 2.3.0.80 is installed.
The message "data connection refused" disappeared and replaced by the provider's name. But the problem remains exist. Indicator on the top right screen displays "edge" not "EDGE". (http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB02623&sliceId=SAL_Public&dialogID=141640847&stateId=0%200%2066797886)
I took the sim card out and put it into Pearl 8100. Sim card works well, emails and net browser are just perfect. I reinserted it back into BB 8800, but nothing changed, "edge" signal appears, my web icon disapearead. The handheld is functioning no more than a mobilephone.
The technical support staff had help me through this process. They gave up and concluded something wrong with the handheld.
Can anyone please help?

I am not sure what provider u are with and I assume u must have a data pakage so u are able to access these services-what it means is that it isn't connecting with RIM and u must go thru RIM to acess these services is the simplest way I can put it LOL---any way to fix ( make sure u have at least 3 bars of signal strength) go to OPTIONS- ADVANCED OPTIONS-HOST ROUTING TABLE THEN HIT THE BUTTON TO THE LEFT OF THE TRACKBALL(menu button) click register now) this regisers u with RIM u will receive a message in your messages box----if this does't work take your battery off for a min and put it back on it refeshes anything new that was done on the network----hope this helps

FTP Client can not make a Data connection in Extened Passive Mode

When i send the command "EPSV" to the FTP server , it reply with the message :
229 Entering Extened Passive Mode (|||60238|)
It seems the Server accept Extended Passive Mode.
But then i send the LIST command to the server , after a few seconds i got an exception :
java.Net.ConnectException : Connection timed out : connect
In my Java Program, after sending the "EPSV" command to the server and receiving the port number, my program then initiate a data connection by calling : Socket dataConnection = new Socket(serverHost,serverPort) , serverHost is the host of the FTP server, and serverPort is the port that the server send me.
I think the problem here is that the initiate of data connection is failed. But i dont know why.
Can anyone explain for me ? I really appreciate.

You may be a newbie, but at least your questions are intelligent.
Abstracting the network part - yes, this can be done, but you should keep in mind that the VI will still be running on the remote target, so you should not use this to plug directly into your RT code. In these cases, a communication module is very good because it decouples the undeterministic comm from the RT code. You can do this either using a protocol, as you mentioned, or by calling the VIs running on the cFP. For example, a VI could be used as a repository by having an uninitialized shift register which maintains its value between runs (this is known as a LV2-style global) - the cFP app will write values into it and the PC app will read values from it.
To do this, you open a reference to the application running on the cFP and then you call VIs dynamically by name. By using the Call by Reference Node you can call the VI and use its connectory pane. All the primitives you need are in the Application Control palette and you should be able to find some examples in the example finder (Help>>Find Examples) by searching for "dynamic" and other similar terms. Attached is a simpified example.
To transfer data in a real-time target, I believe your best bet would be RT FIFOs.
To learn more about LabVIEW, I suggest you try searching this site and google for LabVIEW tutorials. Here, here, here, here, here and here are a few you can start with and here are some tutorial videos. You can also contact your local NI office and join one of their courses.
In addition, I suggest you read the LabVIEW style guide and the LabVIEW user manual (Help>>Search the LabVIEW Bookshelf).
You should also follow the online communities (this one, the LAVA forums, Info LabVIEW).
Try to take over the world!
Attachments:
Comm Demo.llb ‏63 KB

"Ultra Stamina Mode Repair": Z3 keeps restarting

Hi,
Since a little while I am owner of a Z3. Unfortunately, I can't use it because of the following problem. After I turned the Ultra Stamina Mode off, I get a pop-up that says: Ültra Stamina Mode Repair" Then my phone turns off and keeps restarting.
Please, can someone help me? How do I solve this? It's really annoying and frustrating .
I hope to receive some useful replies, thank you.

Try performing a system repair using Pc Companion as this will often fix issues - This will factory reset your phone
Switch off your phone and unplug from Pc (Hold volume up and power for around 10 seconds)
Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the onscreen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process
If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose Windows 7 or XP
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

All of my playlists made on my Ipod touch 3rd gen keep disappearing when I sync it to itunes. Drivng me crazy. All software up to date on both itunes and Ipod. Help please.

All of my playlists made on my Ipod touch 3rd gen keep disappearing when I sync it to itunes. Drivng me crazy. All software up to date on both itunes and Ipod. Help please.
I tend to make my playlists right on my ipod. This did not happen for the last 2 years. Just started recently. Did get a new computer recently.

That is because you got a new computer. You can only sync all media from one syncing computer. You can sync from any computer to iPod using the manual method but that does not sync from iPod to computer.
To make this your syncing computer:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

I have a WD Passport HD attached to my Mac. When it was last connected it went into sleep mode and ran out of battery. Now I cannot find my HD in Finder and Disk Utilities is telling me it cannot repair the HD. Any ideas on how to recover my data?

I have a WD Passport HD attached to my Mac. When it was last connected it went into sleep mode and ran out of battery. Now I cannot find my HD in Finder and Disk Utilities is telling me it cannot repair the HD. I can see the HD but the volume part is greyed out. Any ideas on how to recover my data?

There are other methodologies of scanning a HD
which involve data extraction, but loss of metadata is often the result if the directory is corrupt.
Metadata is the info on what the data IS.
Like having all your papers thrown in the air, its all there, but just a giant mess.
This is why you always always must have several external HD redundancies of your data. One isnt enough, neither is two really.
see here, and dont let that happen again>
Methodology to protect your data. Backups vs. Archives. Long-term data protection
Was that your only copy of your priceless data? Just that one external HD?

Video mode on camera app keeps disappearing

Hi,
I'm owner of iPhone 5c and unfortunately I have experienced some issues with my camera app on iOS 7.0.3.
Basically video mode keeps disappearing and the only way to get it back,is to restart the device.
Anyone else experienced such issues?
Please let me know if this is bug or hardware issue?!
Thanks in advance

What user troubleshooting have you tried? The user steps are restart, reset, restore from backup, and if needed restore as a new device. You have tried restart, since that is what you do when you turn the device on and off. A reset is done by holding the sleep/wake and home buttons together until you see the Apple logo and then release. Restores are done via iTunes. If you have to do the reset more than once, then I would suspect a software issue and I would try the restore. If after a restore as new, the camera still malfunctions, then make an appointment at the Genius Bar at the Apple store to have the device looked at.

Stamina mode / Ultra stamina mode as an action in Sony smart connect?

Please provide triggering Stamina/Utra stamina as an action in Smart Connect. I must be able to initiate stamina mode when I read NFC tag.
Sony Xperia Z3 : D6653
Lollipop 5.0.2, Image 23.1.A.0.726
India

Contact Sony directly and submit your suggestion
http://support.sonymobile.com/global-en/contactUs/
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Airport Express connected but keeps disappearing from itunes

HI,
I have an airport express which is connected to some speakers and I'm using Airplay to stream music from Itunes to the speakers.
However the speakers keep disappearing from itunes. If I reboot the Airport Express they reappear, then have a few hours will disappear again!
In all cases I can connect to the Airport using the configuration utility and I can ping the device, so I don't think it's a problem with the Wifi, just with Airplay. Also the Airport express is only 4 meters from the Access Point.
I have two windows 7 machines, both using itunes (latest version) and a MAC - all machines have the same difficulty with the speakers intermittently disappearing.
Also on the network I have 2 x TVs and a Bowers and Wilkins Zeppelin - all working fine with Airplay.
The Airport Express is on version 7.5.2 and is using a static IP address.
Any Thoughts anyone?

Did you disconnect the cable modem's power supply before re-connecting it and then attaching the AirPort Express device? Be sure to pull the power spike—don't just use an on/off switch.
On some older cable modems, it's necessary to leave the power cable unplugged for up to 12 hours or so.

Difference between passive and active data connection mode for FTP

Hi,
Does any body have the idea of passive and active data connection mode for the transport protocol FTP.
I have one server with FTP, I have to pick the data from this FTP to XI.
What is the difference between active and passive data connection? Does XI supports both the connections?
Thanks & Regards
Katta Mohan Reddy

Hi
According to SAP Note - 821267
Q: Does the File Adapter support active data connections when connecting to an FTP server?
A: Up to and including SP14, the File Adapter exclusively uses passive data connections. Starting with SP15, active connections will be available.
Difference between active and passive,
You can definitely refer to the site mentioned by Suraj
cheers
Sameer

"Get media content now" without data connection?

Hi all.
I have a prepaid sim in my Lumia because I use it very little. When I got my Lumia charged and running 2 weeks ago, I had the equivalent of over $240 credit on my SIM card, "Data connection" was switched on and once the Lumia was running, I sent one single text message with the word "testing" to my daughter. Next day I was horrified when my provider sent me a message "you have less than 10 Francs credit". I called Swisscom and they told me that the day before, my Lumia had gobbled up more than the equivalent of $150 and that THAT day so far it had used up over $80. I felt absolutely sick. Normally 100 Swiss Francs lasts me for a year.
They told me to switch off the Data connection and just use wifi. But now, when my daughter sends me a picture, I just get that blasted "Get media content now" message.
I simply cannot afford the data connection. I could get images and multimedia content messages fine with my late departed and much-missed E7 and even my old Communicator could pick up multi-media via wifi. so why the step back with the Lumia ??? And is there any way I can get e.g. multimedia images without a data connection (I already tried the aircraft mode on/off trick with no luck).
Our entire family have been Nokia customers since they first made mobile phones but by now I am the only one of us who has persevered (thanks to the Communicator then the E7) but I hate this bloody Lumia 900 thing which I received as a replacement for my non-charging E7. I swear I am going to put it on ebay and get myself an Iphone and will never buy a Nokia again.

The 150+ SFr was presumably from a phone software update. I didn't send an MMS message but an SMS = one word only.
I checked that the wifi icon was on at all times but the Nokia seems to look first for G3. Because Nokia didn't even have the courtesy of sending me a manual or user instructions of any kind (or charger or SIM removal pin or headphones) when they sent me this phone, I didn't think of checking the data connection setting to be honest.
Last night I wasted a further 7 hours trying to install Zune on my XP PC.. It said it couldn't install because Media Centre needed updating to Rollup 2 or later. I already HAVE all the Media Centre updates, went to Microsoft, wanted to download it again, they wanted verification but when I ran their verification tool I was told that the verification tool was outdated and to use the later version - yes, and that on the Microsoft website..
After 7 hrs of going round in circles, I went to bed at 5 a.m. and today went to Swisscom and got myself an Iphone 4. I have better things to do than to spend 7 hours trying to install software..
OK, it's another rant but I am mightily dissatisfied with Nokia - even the keypad keeps rolling itself up when I try to enter something. so to enter a 10 digit phone number takes a total of about 30+ taps because the damn keypad disappears before I can tap on a number. Incredible.

Data connection keeps disappearing in Stamina mode

Similar Messages

Maybe you are looking for