"Data Connectivity Tutorial: Connecting to Object Collections" Problem
Post Author: Brian Wildrick
CA Forum: Data Connectivity and SQL
Using VS2005, followed the directions to the letter. On page 363, "Connecting a Report to the Stock Object" > "To connect a Crystal report to the Stock object" > 6. Expand the Stock class to view a selectable sub node - I can't actually expand out the object/source to show it's public properties for use in the report. Any suggestions?
Post Author: Brian Wildrick
CA Forum: Data Connectivity and SQL
Using VS2005, followed the directions to the letter. On page 363, "Connecting a Report to the Stock Object" > "To connect a Crystal report to the Stock object" > 6. Expand the Stock class to view a selectable sub node - I can't actually expand out the object/source to show it's public properties for use in the report. Any suggestions?
Similar Messages
-
Here is the order of what I did to my iPad:
1. A restrictions passcode was put on and we couldn't remember it. Despite numerous attempts at righting this, I couldn't. The iPad would not sync with any iTunes on any computer, Mac or PC.
2. I put a, 'use passcode after one minute' passcode on it and deliberately put in 10 wrong passcodes so it would disable the iPad. Now it still will not connect to any iTunes.
3. I connected to my iCloud account and removed the iPad from the cloud; it says it will erase all iPad data when it connects to the internet. I am fine with that, I need to know what to do now, though. iPad says, 'Connect to iTunes,' but it won't. Please help this amateur of all amateurs!!See iPhone DFU mode explained, and how to enter DFU mode.
-
Error while extracting data via UD Connect
Hi,
Trying for the first time to connect Oracle data base/JDBC connection type via UD connect(we are in BI 7.0).While creating the data source and assigning UD Connect source object in the extraction tab,following error is obtained" UDCADAPTERROR::RSSDK100 ,cannot open connection"
Appreciate if anybody can advice me on this..checked the RFC connection in BW and its working ok.
regards
saviHi Michael, we have JDBC connection tested in TestJDBCPage.jsp and working good, only have problems in Schema for access to tables, but in SQL test using Schema the result is ok.
How we can get Logs for detect the problem in msg : <b>UDCADPTERERROR::RSSDK|200|TABLE:</b>
We apreciate you collaboration, thank you. -
ever since i forgot my apple id password and changed to a new one, I am continually being asked to enter my iCloud password. It then says that this mac can't connect to iCloud because of a problem with "my username". nothing I do in in preferences helps.
You have to sign out completely in System Preference>iCloud (click 'Sign out') on a Mac, or Settings>iCloud on an iOS device (click 'Delete account' - this will not delete the account from the server). Then sign in with the new password.
Your iCloud data will disappear from your Mac or device when you sign out but will reappear when you sign back in. -
Regarding Short Dump While loading data from DB Connect
Dear All,
We are having an issue of getting short dump while loading data from DB Connect to BW. We were able to load the data into BW Dev using the same data source without any problem. Whereas in Production, I am getting the following error:
Runtime Error PERFORM_CONFLICT_TAB_TYPE
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
What could be the reason for the error that I am gettinghi,
Refer Note 707986 - Writing in trans. InfoCubes: PERFORM_CONFLICT_TAB_TYPE
Summary
Symptom
When data is written to a transactional InfoCube, the termination PERFORM_CONFLICT_TAB_TYPE occurs. The short dump lists the following reasons for the termination:
("X") The row types of the two tables are incompatible.
("X") The table keys of the two tables do not correspond.
Other terms
transactional InfoCube, SEM, BPS, BPS0, APO
Reason and Prerequisites
The error is caused by an intensified type check in the ABAP runtime environment.
Solution
Workaround for BW 3.0B (SP16-19), BW 3.1 (SP10-13)
Apply the attached correction instructions.
BW 3.0B
Import Support Package 20 for 3.0B (BW3.0B Patch20 or SAPKW30B20) into your BW system. The Support Package is available oncenote 0647752 with the short text "SAPBWNews BW3.0B Support Package 20", which describes this Support Package in more detail, has been released for customers.
BW 3.10 Content
Import Support Package 14 for 3.10 (BW3. 10 Patch14 or SAPKW31014) into your BW system. The Support Package is available once note 0601051 with the short text "SAPBWNews BW 3.1 Content Support Package 14" has been released for customers.
BW3.50
Import Support Package 03 for 3.5 (BW3.50 Patch03 or SAPKW35003) into your BW system. The Support Package is available once note 0693363 with the short text "SAPBWNews BW 3.5 Support Package 03", which describes this Support Package in more detail, has been released for customers.
The notes specified may already be available to provide advance information before the Support Package is released. However, in this case, the short text still contains the term "Preliminary version" in this case.
Header Data
Release Status: Released for Customer
Released on: 18.02.2004 08:11:39
Priority: Correction with medium priority
Category: Program error
Primary Component: BW-BEX-OT-DBIF Interface to Database
Secondary Components: FIN-SEM-BPS Business Planning and Simulation
Releases
Software
Component Release From
Release To
Release And
subsequent
SAP_BW 30 30B 30B
SAP_BW 310 310 310
SAP_BW 35 350 350
Support Packages
Support
Packages Release Package
Name
SAP_BW_VIRTUAL_COMP 30B SAPK-30B20INVCBWTECH
Related Notes
693363 - SAPBWNews BW SP03 NW'04 Stack 03 RIN
647752 - SAPBWNews BW 3.0B Support Package 20
601051 - SAPBWNews BW 3.1 Content Support Package 14
Corrections Instructions
Correction
Instruction Valid
from Valid
to Software
Component Ref.
Correction Last
Modifcation
301776 30B 350 SAP_BW J19K013852 18.02.2004 08:03:33
Attributes
Attribute Value
weitere Komponenten 0000031199
Thanks
(Activate ODS/Cube and Transfer rules again..) -
Can't load data using DB Connect
I'm trying to use DB connect to load data from an external source database into SAP BW. Both databases are MSSQL. I've followed the steps in the document, "Transferring Data with DB Connect". The table in the source system has all CAPS for the table and the fields. I can see the data in the BW system via screen "DB Connect: Display of data from the database system". However, when I create an info package and try to load the data, the job seems to hang. It is stuck in YELLOW status with "0 from 0 records". Does anyone have a clue?
Thank you,
Tonydear Tony,
check if followed already all 'restictions' in oss 512739-BW external DB Connect for MS SQLServer
Datasource not showing up in RSA3
To avoid problems loading data, proceed as follows:
1. Create a special login for the extraction.
You should add this login to the db_ddladmin database role in the corresponding database. This generates a similar DB user at database level.
The user you use must have the 'CREATE VIEW' authorization at least. This is contained in the role mentioned above.
2. For the extraction, you should only use DB views that were created under this DB user. (refer also to type conversion, naming convention and so on)
3. Assign the necessary authorizations (SELECT at least) to the selected user in the source tables, or the columns of these tables.
4. Use the specially created login in the logon information when you set up the DB source system in BW. -
After installed iOS7 I am facing the following two problems:
1. WIFI as well as mobile data connection are working fine at my home. But, not connecting with any other outside WIFI networks. Error message is 'unable to join network'. Mobile data also not connected outside my home. Sometimes wifi and mobile data connect outside my home when I turn off and on the phone.
2. Bluetooth, in my car, paires well and incoming and out going calls can be received and made. The problem is no sound out put from speakers.
Apple please make note of the above problems (of million people) and give solution before giving any other updations for painting and tinkering the screens.Check this thread, the same solution might work for you:
http://discussions.nokia.com/t5/Nseries-and-Symbian-Smartphones/N8-111-040-1511-Wifi-and-mobiledata-... -
Hi! I have problem when I import data to my Static View object from *.csv.
I followed tutorial - http://download.oracle.com/docs/cd/E15523_01/web.1111/b31974/bcquerying.htm#CEGCGFCA
Lets take a look to Figure 5-14 Sample Data Ready to Import from CSV Flat File. There are 3 columns. For Example in column C I have only lines. Bun in A and B column I have all 5 lines. I want to import data from one CSV file. So when I imported data and have some empty fields in column C. When I create SelectOneChoice object in my form, and run it, then it takes also empty fields as choices in my SelectOneChoice object. It is when I create Select one choice from column C Why it is so? And what to do?
Waiting for response from anyone...
Best regards!HI! Can someone give me opinion on my problem?
Best regards -
Data service cannot connect to mover
Hello,
I have an installation of OSB that worked ok until last week.
From last week, the following message started appear, and I need your help to understand if this is a physical error or it is a OSB problem:
Error: data service cannot connect to mover - error connecting to another NDMP server (NDMP client)
Below a full example (it is a piece of osb job log):
2011/03/31.10:32:59 ______________________________________________________________________
2011/03/31.10:32:59
2011/03/31.10:32:59 Transcript for job oracle/3732.1 running on srvcmdstbyb
2011/03/31.10:32:59
Volume label:
Volume UUID: 869b6426-3de2-102e-969c-00137252621c
Volume ID: OSB-CATALOG-MF-009352
Volume sequence: 1
Volume set owner: root
Volume set created: Thu Mar 31 10:33:18 2011
Volume set closes: Thu Apr 07 10:33:18 2011 (no writes after this time)
Volume set expires: Thu Apr 21 10:33:18 2011
Media family: OSB-CATALOG-MF
Original UUID: 869b6426-3de2-102e-969c-00137252621c
Archive label:
File number: 1
File section: 1
Owner: root
Client host: srvcmd
Backup level: 0
S/w compression: no
Archive created: Thu Mar 31 10:33:18 2011
Backup piece name: arch_HCB1_3799_1_30_03_2011_747153724
Backup db name: hcb1
Backup db id: 660880637
Backup copy number: not applicable
Backup content: archivelog
Error: data service cannot connect to mover - error connecting to another NDMP server (NDMP client)
Backup statistics:
status 21
devices VS80
devices 1
volumes OSB-CATALOG-MF-009352
voltags (null)
file 1
host srvcmd
encryption off
start_time Thu Mar 31 2011 at 10:33:18 (1301578398)
end_time Thu Mar 31 2011 at 10:33:29 (1301578409)
backup_time Thu Mar 31 2011 at 10:33:18 (1301578398)
dev_kbytes 6
dev_iosecs 11
dev_iorate 605.1 B/S
wrt_iosecs 4
wrt_iorate 1.7 KB/S
physical_blks_written 0
write_errors 0
physical_blks_read 0
read_errors 0
error_rate 0%
2011/03/31.10:33:30 ______________________________________________________________________
Thank you in advance.
Best regards.
Ricardo Brambila.Can you include an "obtool lsh -l" please? You may also want to check that you can do an "obtool pingh" to the client and media servers that are being used. Maybe a service isn't accessible.
Please confirm you are using OSB 10.3.0.3.0 from "obtar -V"
You should also not really be writing your RMAN jobs to the OSB Catalog Media Family. You should instead use its own or the RMAN-DEFAULT one.
Thanks
Rich -
-708 Data receive failed [Connection reset].
We have a problem with this error in DB.
-708 Data receive failed [Connection reset]
We use
MAXDB version: 7.6.00.37
JDBC driver version 7.6.00
After first error occurrence, is error repeating and DB server must be restarted to continue. I read some info about this error on internet, but it didn't help us. We doing nothing with statistics. In this case we execute only simple SELECT prepared statement.
Here is part of our log file with first error:
15.07.2008 13:45:28.114
Caused by: com.sap.dbtech.jdbc.exceptions.ConnectionException: [-708] Data receive failed [Connection reset].
at com.sap.dbtech.jdbc.ConnectionSapDB.execute(Unknown Source)
at com.sap.dbtech.jdbc.CallableStatementSapDB.sendCommand(Unknown Source)
at com.sap.dbtech.jdbc.StatementSapDB.sendSQL(Unknown Source)
at com.sap.dbtech.jdbc.CallableStatementSapDB.doParse(Unknown Source)
at com.sap.dbtech.jdbc.CallableStatementSapDB.constructor(Unknown Source)
at com.sap.dbtech.jdbc.CallableStatementSapDB.<init>(Unknown Source)
at com.sap.dbtech.jdbc.ConnectionSapDB.prepareStatement(Unknown Source)
at sk.nbs.database.Transaction.getPreparedStatement(Transaction.java:185)
... 30 more
Here is part of knldiag file from this time
2008-07-10 14:41:41 0xD3C 20019 Pager First DataCacheSegment:62
2008-07-10 14:41:41 0xD3C 20018 Pager Start TaskId: 6
2008-07-10 14:41:41 0xD3C 20019 Pager First DataCacheSegment:63
2008-07-10 14:41:42 0xD3C 31 SrvTasks Permanently reserved 66 servertasks for 'Backup / Restore'.
2008-07-10 14:41:42 0xD3C 31 SrvTasks Permanently reserved 2 servertasks for 'Backup / Restore'.
2008-07-10 14:41:42 0xD3C 31 SrvTasks Permanently reserved 1 servertasks for 'Savepoint'.
2008-07-10 14:41:42 0x7AC 3 RunTime State changed from STARTING to ADMIN
2008-07-10 14:41:42 0x7AC 19601 DBSTATE SERVERDB is ready
============================================ begin of write cycle ==================
2008-07-15 13:45:27 0x13B8 19651 CONNECT Connection released, T493
2008-07-15 13:45:27 0x13B8 19677 CONNECT Client has released connection, T412
2008-07-15 13:45:27 0x13B8 19651 CONNECT Connection released, T412
2008-07-15 13:45:27 0x13B8 19677 CONNECT Client has released connection, T379
2008-07-15 13:45:27 0x13B8 19651 CONNECT Connection released, T379
2008-07-15 13:45:27 0x13B8 19677 CONNECT Client has released connection, T476
2008-07-15 13:45:27 0x13B8 19651 CONNECT Connection released, T476
2008-07-15 13:45:27 0xCF4 19677 CONNECT Client has released connection, T291
2008-07-15 13:45:27 0xCF4 19651 CONNECT Connection released, T291
2008-07-15 13:45:27 0xCF4 19677 CONNECT Client has released connection, T200
2008-07-15 13:45:27 0xCF4 19651 CONNECT Connection released, T200
2008-07-15 13:45:27 0xCF4 19677 CONNECT Client has released connection, T229
2008-07-15 13:45:27 0xCF4 19651 CONNECT Connection released, T229
2008-07-15 13:45:27 0xCF4 19677 CONNECT Client has released connection, T179
2008-07-15 13:45:27 0xCF4 19651 CONNECT Connection released, T179
2008-07-15 13:45:27 0xCF4 19677 CONNECT Client has released connection, T295
2008-07-15 13:45:27 0xCF4 19651 CONNECT Connection released, T295
2008-07-15 13:45:28 0x13B8 19633 CONNECT Connect req. (T413, Node:'sipseu-nbslsc1', PID:0)
2008-07-15 13:45:28 0x13B8 19633 CONNECT Connect req. (T479, Node:'sipseu-nbslsc1', PID:0)
2008-07-15 13:45:28 0x13B8 19651 CONNECT Connection released, T413
2008-07-15 13:45:28 0x13B8 19651 CONNECT Connection released, T479
2008-07-15 13:45:28 0x13B8 19633 CONNECT Connect req. (T500, Node:'sipseu-nbslsc1', PID:0)
2008-07-15 13:45:28 0x13B8 19633 CONNECT Connect req. (T345, Node:'sipseu-nbslsc1', PID:0)
2008-07-15 13:45:28 0x13B8 19651 CONNECT Connection released, T500
2008-07-15 13:45:28 0x13B8 19633 CONNECT Connect req. (T494, Node:'sipseu-nbslsc1', PID:0)
2008-07-15 13:45:28 0x13B8 19651 CONNECT Connection released, T345
2008-07-15 13:45:28 0x13B8 19633 CONNECT Connect req. (T502, Node:'sipseu-nbslsc1', PID:0)
2008-07-15 13:45:28 0x13B8 19651 CONNECT Connection released, T494
2008-07-15 13:45:28 0x13B8 19633 CONNECT Connect req. (T532, Node:'sipseu-nbslsc1', PID:0)
2008-07-15 13:45:28 0x13B8 19651 CONNECT Connection released, T502
2008-07-15 13:45:28 0x13B8 19633 CONNECT Connect req. (T329, Node:'sipseu-nbslsc1', PID:0)
2008-07-15 13:45:28 0x13B8 19651 CONNECT Connection released, T532
2008-07-15 13:45:28 0xCF4 19651 CONNECT Connection released, T308
2008-07-15 13:45:28 0x13B8 19651 CONNECT Connection released, T329
2008-07-15 13:45:28 0xCF4 19633 CONNECT Connect req. (T204, Node:'sipseu-nbslsc1', PID:0)
2008-07-15 13:45:28 0x13B8 19633 CONNECT Connect req. (T373, Node:'sipseu-nbslsc1', PID:0)
2008-07-15 13:45:28 0x13B8 19633 CONNECT Connect req. (T381, Node:'sipseu-nbslsc1', PID:0)
2008-07-15 13:45:28 0x13B8 19651 CONNECT Connection released, T373
2008-07-15 13:45:28 0x13B8 19651 CONNECT Connection released, T381
2008-07-15 13:45:28 0x13B8 19633 CONNECT Connect req. (T438, Node:'sipseu-nbslsc1', PID:0)
2008-07-15 13:45:28 0x13B8 19651 CONNECT Connection released, T438
2008-07-15 13:45:28 0x13B8 19633 CONNECT Connect req. (T474, Node:'sipseu-nbslsc1', PID:0)
2008-07-15 13:45:28 0x13B8 19651 CONNECT Connection released, T474
2008-07-15 13:45:28 0x13B8 19633 CONNECT Connect req. (T482, Node:'sipseu-nbslsc1', PID:0)
2008-07-15 13:45:28 0xCF4 19651 CONNECT Connection released, T204
2008-07-15 13:45:28 0x13B8 19651 CONNECT Connection released, T482
2008-07-15 13:45:28 0xCF4 19633 CONNECT Connect req. (T156, Node:'sipseu-nbslsc1', PID:0)
2008-07-15 13:45:28 0x13B8 19633 CONNECT Connect req. (T486, Node:'sipseu-nbslsc1', PID:0)
2008-07-15 13:45:28 0x13B8 19633 CONNECT Connect req. (T504, Node:'sipseu-nbslsc1', PID:0)
2008-07-15 13:45:28 0x13B8 19651 CONNECT Connection released, T486
2008-07-15 13:45:28 0x13B8 19633 CONNECT Connect req. (T461, Node:'sipseu-nbslsc1', PID:0)
2008-07-15 13:45:28 0x13B8 19651 CONNECT Connection released, T504
2008-07-15 13:45:28 0x13B8 19651 CONNECT Connection released, T461
2008-07-15 13:45:28 0x13B8 19633 CONNECT Connect req. (T356, Node:'sipseu-nbslsc1', PID:0)
2008-07-15 13:45:28 0x13B8 19651 CONNECT Connection released, T356
2008-07-15 13:45:28 0x13B8 19633 CONNECT Connect req. (T516, Node:'sipseu-nbslsc1', PID:0)
2008-07-15 13:45:28 0x13B8 19651 CONNECT Connection released, T516
2008-07-15 13:45:28 0x13B8 19633 CONNECT Connect req. (T462, Node:'sipseu-nbslsc1', PID:0)
2008-07-15 13:45:28 0x13B8 19633 CONNECT Connect req. (T420, Node:'sipseu-nbslsc1', PID:0)
2008-07-15 13:45:29 0xCF4 19633 CONNECT Connect req. (T253, Node:'sipseu-nbslsc1', PID:0)
2008-07-15 13:45:29 0xCF4 19651 CONNECT Connection released, T253
2008-07-15 13:45:29 0xCF4 19633 CONNECT Connect req. (T220, Node:'sipseu-nbslsc1', PID:0)
2008-07-15 13:45:29 0x13B8 19633 CONNECT Connect req. (T432, Node:'sipseu-nbslsc1', PID:0)
2008-07-15 13:45:29 0xCF4 19633 CONNECT Connect req. (T244, Node:'sipseu-nbslsc1', PID:0)
2008-07-15 13:45:29 0x13B8 19651 CONNECT Connection released, T432
2008-07-15 13:45:29 0x13B8 19633 CONNECT Connect req. (T441, Node:'sipseu-nbslsc1', PID:0)
2008-07-15 13:45:29 0xCF4 19651 CONNECT Connection released, T244
2008-07-15 13:45:29 0x13B8 19651 CONNECT Connection released, T462
2008-07-15 13:45:29 0x13B8 19651 CONNECT Connection released, T420
2008-07-15 13:45:29 0x13B8 19633 CONNECT Connect req. (T442, Node:'sipseu-nbslsc1', PID:0)
2008-07-15 13:45:29 0x13B8 19651 CONNECT Connection released, T442
2008-07-15 13:45:29 0x13B8 19633 CONNECT Connect req. (T561, Node:'sipseu-nbslsc1', PID:0)
2008-07-15 13:45:29 0x13B8 19651 CONNECT Connection released, T561
Can you help me with this error?Hi Juraj,
this looks like a network issue.
Anyhow - you should also consider to install the current patch 7.6.03 available here from SDN Downloadarea.
regards,
Lars -
Tutorial - Connecting an Nokia Phone with an iPaq ...
This Tutorial is as a result of a post by qvodude on 13th January 2008.
Tutorial – Connecting an Nokia Mobile Phone to an HP iPaq Pocket PC
This tutorial has been done using a Nokia 6260 (S60 series 2) and an iPaq 5965 travel companion (windows mobile 5).
Turn on the phone and then go to menu>connections>Bluetooth. When you open Bluetooth you are asked to give your phone a name. (I named mine Nokia 6260). Hit ok. Then highlight Bluetooth and select options>change and switch Bluetooth on. Then scroll down to My phones visibility >options > change > shown to all >ok. Your phone is now set up.
Switch on the iPaq. Start > settings > iPaq Wireless and turn Bluetooth on. Then tap done. On the settings page tap on Bluetooth Manager. When you open Bluetooth Manager it gives you a welcome screen. Just follow the instructions. Luckily my phone is in the list so it was fairly simple. If your phone is not in the list then select Generic Dialer or generic generic. The ipaq will then search for devices in range. In my case it picked up my phone and my laptop. I then selected my phone and was asked if I wanted to pair the devices. I said yes accepted the code that was on the screen and then pressed next. A message then appeared on my phone asking if I wanted to pair with my iPaq. I entered the same code that was used on the iPaq and pressed ok. The ipaq then asked if I wanted to connect to the internet and I said no as I did not want to connect at this time.
On my phone if I highlight Bluetooth and scroll right it shows Paired devices > Pocket PC 5965.
I then tested the setup by tapping tools > connect on the iPaq. My phone then asked if I wanted to Accept connection request from pocket PC. I then selected yes and my Pocket PC showed that I was connected to my network (Optus).
I trust that this helps you. If you have any further problems let me know. I will be going away next Thursday 22nd and will not be back until Wednesday 28th. Whilst I am away I will not be in a position to access these forums so if you could get back to me before then I would appreciate it.
Regards
BarryHey Bazyeo, sorry im writing soooooo late. I just wonted to thank you for the post on "Connecting an Nokia Phone with an IPAQ..."
Been really busy with job changes and all, as you know the States (US) is going thru a really bad job $hit, and I got dump... well I **bleep** one of the upper management guys off and was asked to resign. But oh well thats another post
Adios mate!
Message Edited by qvodude on 16-Jul-2009 05:08 PM -
As mentioned above I have just downloaded OSX Maverick to my iMac. I am now having a lot of problems with iCloud. I get the message that "This iMac can't connect to iCloud because of a problem with, and then it goes on to quote my e-mail address. It then says to open iCloud preferences to fix this problem.
I do this and no matter what I seem to do this message continues to return.
Can anybody explain how to resolve this problem (please bear in mind that I am noy very computer literate).
Many thanks
MikeHello John
Sorry I haven't got back to you sooner.
Thanks very much for your help, your solution solved my problem.
Thanks again and kind regards
Mike -
How to read data from a connected modem
any one can help me? how to read data from a connected modem. The modem received real-time data from other server. The data is in text format. I can see this text when I used hyperterminal for dial up and the data is accumulated such as:
@aa1235678
@bb2135647
@cc5214367
since it is real-time data, I want to read one line each time instantly when it arrives.You need to use the Java Communications API. (http://java.sun.com/products/javacomm/index.html)
-
i've lost my Iphone 4 and found it back. i am unable to restore data. if i connect to itunes its getting restarted again and again. what should I DO ??? TS KEEP ON RESTARTING ALL THE TIME
Hi there balaji007,
You may find the troubleshooting steps in the articles below helpful.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
-Griff W. -
My MacBook Pro that is running on Mac OS X 10.6.8 won't update software that I need in order to download the newest iTunes software to connect to my iPhone 6. Problem is that when I go to update, it restarts the computer but never updates any of the software.
In addition to Stedman's spot-on reply --
When you buy an upgrade disk, all updates in that OS can be found on Software Update.
For instance, I bought Snow Leopard at 10.6.
All other updates have been free and downloadable. So I'm not a 10.6.7.
10.4 (Tiger) went to 10.4.11.
10.5 (Leopard) went to 1.5.8
10.6(Snow Leopard) is currently at 10.6.7.
Now, when Lion come out (the next major upgrade of OSX), I will have to pay to go to 10.7.
After that, updates are free til 10.8 comes out.
Maybe you are looking for
-
I have several entries in my address book that contain Apartment numbers, suite numbers and so forth. When I click on such an address in my OS X addressbook entry, the Google Maps application comes up in Safari, but invariably is unable to match the
-
Using Adobe Acrobat 7.0 w/Reader 9.0: Cannot Enable Commenting
Hello, Currently, I use Adobe Acrobat 7.0 to PDF documents and then send them out for review. When I send out the PDF documents in an email-based review, my colleagues open the documents with Adobe Acrobat Reader 9.0, but are unable to add and save c
-
Can someone please help?
-
Function module to read Lock objects
Hi all, I'm doing a generic search program for all the objects.. Is there any function module to read Lock objects.... that is to know wat r all the tables and Lock parameters are there in a lock object
-
Unable to access Remote EJB with jndi.properties in classpath
Hi I'm trying to use remote interfaces with my adf web layer. Created remote datacontrol for my model part and my model EAR is deployed in another Oracle App Server instance(S1). My web layer is deployed in another Oracle App Server(S2). My page def