Data conversion from legacy : through BOM or recipe for a process industry?

Hi all
I am working on data migration document for BOM , ROUTING, PROD VER. My question is whether during migration from legacy we should first migrate the Recipe and add the comp no for creating BOM in mass creation , Or that we should bring the BOMs directly from the legacy? Which method is better from strategic point ?

Hello,
for migration into CRM I would suggest the 'XIF-Interfaces'; these are interfaces provided in CRM for connection to external systems. I'm not sure if this will cover all objects mentioned above, but at least some of them should exist.
Some information about existing interfaces can be found in the integration repository under http://ifr.sap.com/index.html; from the start screen first select 'Enter the repository' and then have a look under 'generic components' and 'SAP CRM'.
Regards, Katja Ohliger

Similar Messages

GL Data Conversion from Legacy to Oracle EBS

Hi All,
I am tasked with converting legacy data into GL. I have worked on other conversions like supplier, AR and AP conversions but never worked on GL conversion, so I don't know how and where to start, what are the pre-requisites for entering data into gl_interface table how to ensure that data is correct in the .csv file etc.
Kindly request you all to guide me in right direction. Hope to hear from you all very soon!!! :)
Regards

Hi,
When you talk about GL-Data it is the trial balance to be loaded from legacy to oracle applications.
You can use Web-ADI to upload it ,the check list are
The balance for each account comibnation in the legacy system to be mapped to GL-Oracle code combination balance
With respect to open AR, AP Invoices if the invoices are converted using a control account for migration in GL then
the the balance transfered from AP,AR need not be reversed in GL from the source receivables and payables.
In case if the same account combination are for migrating the balances from AP,AR to GL ..Then the balances transferred from AP,AR should be reversed ..so that it does not affect the TB-GL-Balance
Finally ensure that the balance for the TB-tallys with your legacy system and upload it using Web-ADI ,import and
review and post it.
Hope this points helps your GL-Data conversion.
Regards,
Ramaa

Data conversion from legacy to SAP

Hi
I am put on covnersion of legacy data and given options to use the one of the following tools
LSMW
CATT
DTW
I am new to all this. I have to migrate the following data
GL Master
GL Open Balance
AP Master Data
AP Opn items
Fixed Asset Master
Fixed Asset Balance
Proft Centers Master Data
cost Center Data
Can youspecify which of the tools is most suitable for the conversion in each case?
please can anyone reply?
EMENEM

CATT is not a Data Uploading tool. It will work till 4.7EE.
You cannot see CATT after 4.7EE.
If the Data is bulk then Go for BDC (Batch data Communication) Else use LSMW (Legacy System Migratration Workbench)
again it Depends on your Requirement and your Perfectness.

Data load from Legacy system to BW Server through BAPI

Requirements: We have different kind of legacy systems and SAP BW server. We want to load all legacy system data into SAP BW server using BAPI. Before loading we have to validate all data. If there are bad data, data missing we have to let the legacy system user/ operator knows to fix the data into their system with detail explanation. When it is fixed, we have to load the data again.
Load Scenario: We have two options to load data from legacy systems to BW Server.
1. We need to load data directly from legacy system to BW Server using BAPI program.
2. Legacy Systems data would be in workstations or flash drive as .txt (one line separated by comma) or .csv file. Need to load from .txt /.csv file to BW Server using BAPI program.
What we want in the BAPI program code?
It will Read / Retrieve data from text / csv file and will put into the Internal table. Internal table structure would be based on BAPI InfoObject structure.
Call BAPI InfoObject function module BAPI_IOBJ_CREATE to create InfoObject, include all necessary / default components, do the error check, load the data and return the status.
Could some one help me with the sample code please? I am new in ABAP / BAPI coding.
Is there any other better idea to load data from legacy system to BW server? BTW we are using BW 3.10. Is there any better option with BI 7.0 to resolve the issue? I appreciate your help.

my answers:
1. this is a scendario for a data push into SAP BW. You can only use SOAP-Based Transfer of Data.
http://help.sap.com/saphelp_nw04/helpdata/en/fd/8012403dbedd5fe10000000a155106/frameset.htm
(here for BW 3.5, but you'll find similar for 7.0)
In this scenario you'll have an RFC dinamically created for every Infosource you need to transfer data.
2. You can make a chain for each data load, so you can call the RFC "RSPC_API_CHAIN_START" to start the chain from external.
the second solution is more simply and available on every release.
Regards,
Sergio

AR & AP Data migration from legacy

Hi,
1.What are the precaution to be taken for Data migration from legacy system?
2.We intend to use a conversion ac ( Dr conv ac cr Vendor ) Is it Correct way of doing it ?
3.How do i ensure that all my invoices uploaded correctlt ?
4.What is the best Standard program to get it doen ?.
5.Is LSMW is best to do it or shall I have to go for custom development?
Any piece of yr advice is appreciated.
Thanks, Chitra

Hi Chitra,
Following link are helpful in understanding LSMW:
Note 105244 - LSMW 1.0: known problems, tips and tricks
Re: LSMW and error handling
/community [original link is broken]
For Data Migration:
Note 400257 - Data Migration and Upload Report
Note 739860 - Data migration from a legacy system to SAP
Hope this helps.
Please assign points as way to say thanks

How do i do data conversion from 11.0.3 to 11.5.10?

Hi to all,
If any body have any approach how to do data conversion from 11.0.3 to 11.5.10 release?
Thanx in Advance

ajones2 wrote:
I got the update to work but there seems to be one thing that does not work
I'm anxious to install 4.5 as well because I understand the music player features a sound equalizer, but I believe it's not prudent to get it from somewhere other than your carrier. I could be wrong, but I think that each carrier tweaks the OS in some fashion...
Does your 4.5 have the sound equalizer ?
George from Bedford, TX
8120 on T-Mobile with BB Unlimited Email+Internet but
without the BlackBerry Enterprise service

Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 3 (NumberOfMultipleMatches).

Hi,
I have a file where fields are wrapped with ".
=========== file sample
"asdsa","asdsadasdas","1123"
"asdsa","asdsadasdas","1123"
"asdsa","asdsadasdas","1123"
"asdsa","asdsadasdas","1123"
==========
I am having a .net method to remove the wrap characters and write out a file without wrap characters.
======================
asdsa,asdsadasdas,1123
asdsa,asdsadasdas,1123
asdsa,asdsadasdas,1123
asdsa,asdsadasdas,1123
======================
the .net code is here.
========================================
public static string RemoveCharacter(string sFileName, char cRemoveChar)
object objLock = new object();
//VirtualStream objInputStream = null;
//VirtualStream objOutStream = null;
FileStream objInputFile = null, objOutFile = null;
lock(objLock)
try
objInputFile = new FileStream(sFileName, FileMode.Open);
//objInputStream = new VirtualStream(objInputFile);
objOutFile = new FileStream(sFileName.Substring(0, sFileName.LastIndexOf('\\')) + "\\" + Guid.NewGuid().ToString(), FileMode.Create);
//objOutStream = new VirtualStream(objOutFile);
int nByteRead;
while ((nByteRead = objInputFile.ReadByte()) != -1)
if (nByteRead != (int)cRemoveChar)
objOutFile.WriteByte((byte)nByteRead);
finally
objInputFile.Close();
objOutFile.Close();
return sFileName.Substring(0, sFileName.LastIndexOf('\\')) + "\\" + Guid.NewGuid().ToString();
==================================
however when I run the bulk load utility I get the error
=======================================
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 3 (NumberOfMultipleMatches).
==========================================
the bulk insert statement is as follows
=========================================
BULK INSERT Temp
FROM '<file name>' WITH
FIELDTERMINATOR = ','
, KEEPNULLS
==========================================
Does anybody know what is happening and what needs to be done ?
PLEASE HELP
Thanks in advance
Vikram

To load that file with BULK INSERT, use this format file:
9.0
4
1 SQLCHAR 0 0 "\"" 0 "" ""
2 SQLCHAR 0 0 "\",\"" 1 col1 Latin1_General_CI_AS
3 SQLCHAR 0 0 "\",\"" 2 col2 Latin1_General_CI_AS
4 SQLCHAR 0 0 "\"\r\n" 3 col3 Latin1_General_CI_AS
Note that the format file defines four fields while the fileonly seems to have three. The format file defines an empty field before the first quote.
Or, since you already have a .NET program, use a stored procedure with table-valued parameter instead. I have an example of how to do this here:
http://www.sommarskog.se/arrays-in-sql-2008.html
Erland Sommarskog, SQL Server MVP, [email protected]

Data Migration from Legacy system to ECC systems via ETL through SAP PI

Hi All,
I wanted to know if we can migrate the data from Legacy systems to ECC systems via PI.
What I understand is there is ETL tool is used to extract the data from legacy system, and what client is looking to load that data via PI?
Can we do that ? I am concerned because this will involve mass data?
If I have to use PI , I see option of PROXY / IDOC /FILE as receiver in ECC system (take the data from ETL)?
Can somebody has done this earlier , please share the approach.
Thanks,
Pushkar Patel

Hi ,
I require few details from you.
1. What ETL tool you are using, If Informatica, it already have PowerConnect to connect to SAP. So you can create source and Target Structure and also you can use RFC's to send data to R/3. Else, for other ETL tools, can you prepare RFC's or any other way to send data to R/3. let me know the tool.
2. Does R/3 contains the master data tables? If yes, then try to use LSMW for Mass upload of data to tables.
If your client don't want to use either of these options please elaborate, what is the case.
Regards
Aashish Sinha

Data Migration from Legacy System in IS-U

Hi All,
We are going to Implement a new IS-U project, I have a problem with LSMW(Legacy System Migration Workbench ), I have some Conversion Objects of IS-U and I need to know whether Data Migration is possible or not, please tell me how to find these Objects and how to know Data Migration is possible or not.
Objects are like.,
1. Accounts
2. Actuate Reports
3. Business Partner Relationships
4. Active Campaigns/Campaign Content/Dispositions
5. Connection Object
6. Contacts
7. Contracts
8. Opportunities
9. Payment Arrangement History
10. Payments
11. Premises
12. Rate Changes
13. Security Deposits
these are few and there are some more..,
Thanks in Advance,
Sai.

Hi Ram,
Use Transaction Code EMIGALL. It will ask for company code. By default Company Code is SAP. If you entered with the SAP you will get all the objects.Then goto menu IS-U Migration-->User Handbook. It will give you details Idea.
Also Check the following Procedure
You can find detailed documentation of EMIGALL in SAP itself. Use Transaction EQ81 to display it. It provides all the concepts and procedures to work with EMIGALL.
Here are some points about EMIGALL :
1. It Migrates data Business Object wise
2. It uses Direct Input Technique
3. It has more than 100 objects of IS-U
and the steps for implementation goes like this:
1)You have to create a user specially for migration which will have all the authorizations related to migration workbench, BASIS and IS-U
2)You have to create your own company in EMIGALL. There is a default company called SAP.
3)Company SAP contains all the Business Objects
4)You have to figure out what business objects u need and then u have to copy those business objects to ur company from Standard Company SAP
5)Each objects contains more than one structure and each structure can contain more than one fields. The relation goes like this
Object ---> Structure ---> Field
6)You have to define field rules for each required field of the object. You have to mark "Not required" for fields u don't need
7)After field rules for a given object is set u have to generate load report i.e. actual Direct Input Program which will migrate data. This program is generated on basis of field rules set by u.
8)After the load report is generated u have to prepare an input file (import File) for migration. The import file should be according to structure provided by SAP and must be in binary format. SAP Provides the structure of file according to your configurations. You have to write ur own Data conversion program(in any language) for this task.
9)You take import file as input and migrate the data using generated load program
10)Finally u can check the Migration Statistics and Error Log
Thanks and Regards,
Jyotishankar Dutta
Message was edited by:
Jyotishankar Dutta
Message was edited by:
Jyotishankar Dutta

Cycle count dates upload from Legacy.

Hi,
In my client there is a requirement to upload the last count date from legacy to sap at the time of cutover. This they want as after inventory load they dont want to start counting everything which A kind of materials. Client is asking, since i have this date, so keep this date in SAP & then calculate the next date in SAP after go live from that date.
I searched all the places & found that since the field is internal i really cannot populate this. Is there any standard program or some how create one program to upload this date. If yes then plz let me know. If you had used this methodology, then kindly provide me the details.
Thanks in advance.
Avas

Create additional CC indicator with 'No of Physical Inv' as zero and use this one to maintain the materials that already undergone cycle counting before go-live. Also, have the CC indicator as fixed for these materiasl in material master -> Plant data. When you run ABC analysis (MIBC), these CC indicators won't be changed and as they 'No of Physical Inv' as zero, they won't be part of your cycle counting. When you need these materials to be part of cycle count, change the CC indicator as fixed and run MIBC, now system proposes the cc indicator based on consumption/usage.
Or
You can keep a block for the materials that already undergone cycle counting before go-live in MBEW-SPERW through transaction MM17 or MASS.
Please award points if useful.

Data migration from legacy system to SAP

hi all,
could you please post some docs on migration from legacy system to SAP system., also the problems faced while migration and best practices in data migration
regards
sridharan

Hi ,
I require few details from you.
1. What ETL tool you are using, If Informatica, it already have PowerConnect to connect to SAP. So you can create source and Target Structure and also you can use RFC's to send data to R/3. Else, for other ETL tools, can you prepare RFC's or any other way to send data to R/3. let me know the tool.
2. Does R/3 contains the master data tables? If yes, then try to use LSMW for Mass upload of data to tables.
If your client don't want to use either of these options please elaborate, what is the case.
Regards
Aashish Sinha

Master data upload from legacy

Dear All,
We are supposed to upload the master data from legacy system to SAP using LSMW and BDCs.
Is it possible to develop an interface between legacy system and SAP ERP for a direct data transfer? Can this be accomplished using XI?
Is the scenario asked by my team as above recommended by SAP?
regards, Sean.

Yes I think u can use XI to create an interface to transfer data from legacy system to R/3 also u can use other middle ware like webmethods to do the same. U can use ALE/EDI technology to transfer data as idoc .

Date migration from Legacy system (excel file) to CRM 7.0

Hi,
Can any one guide me on the below:
I am provided with excel files having prospect data with 63 fields and most of them are not the part of standard fields available.
The requirement is to create the same data in CRM. I am unable to use ELM as most of the fields are not available. I suppose i need to get the fields created by technical team. However need some knowledge sharing on this. I think even BAPI approach would need fields to be created first.
Should i revert back to the client asking for detailed information on the tabs or sections under which the missing fileds have to be created?
Also guide me with alternate solution to map the data from legacy to CRM
Please mark your solution on this
thanks

Agarwal,
In your situation you need to have the additional attributes created in CRM, before you can do an upload. Now if the new attributes are marketing attributes for the business partner, you can use ELM. Otherwise if you still want to do ELM then you need to use the BADI.
Your other option is use XIF adapter with LSMW to perform the upload, but the custom fields must appear in the bdoc structure on the CRM for them to appear. Normally this won't be a problem if the CRM system has been extended via EEWB or AET.
Take care,
Stephen

Date conversion from Excel to the SAP format

Hi,
I have created a BDC program which uploads daat from Excel sheet.
There is a date field also, the format of which can be any as per the end user (it will be one of those allowed by SAP).
However, the file will be used for execution by another user who may have a date setting which is different than that from the one in Excel.
Eg. End User's date format: DD.MM.YYYY, SAP User's date format: MM/DD/YYYY
So, how do I convert the date format from excel to the format which will be accepted by the transaction during the recording?
Regards,
Dave

Hi Dave,
I have faced the same issue while uploading the date to the bdc.
if ur date format is DD.MM.YYYY in the excel file, first of all you need to change this to dats format ie YYYYMMDD ie character8 format and pass to the bdc, it will automatically convert to sap format
ie you need to convert splitting at .
data lv_date type char10,
        lv_dd type char02,
        lv_mm type char02,
       lv_yyyy type char04,
v_date type char08.
lv_date = '30.12.2011'.
split lv_date at '.' into lv_dd lv_mm lv_yyyy.
if strlen(lv_dd) lt 2.
   concatenate '0' lv_dd into lv_dd.
endif.
if strlen(lv_mm) lt 2.
   concatenate '0' lv_mm into lv_mm.
endif.
concatenate lv_yyyy lv_mm lv_dd into v_date.
"Please use the variable V_DATE to populate to ur bdc"
Edited by: Rahul Babukuttan on Aug 11, 2011 5:35 PM

Upload master data tables from legacy systems with XI on BW

Hi developers,
Can you help me to reconstruct the steps necessary for upload master data, deriving by legacy tables, on BW system using XI?
Thanks in advance

Hi,
see the following link https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/52398597-0601-0010-868a-fd95f8061d85
Rgs
Antonino

Data conversion from legacy : through BOM or recipe for a process industry?

Similar Messages

Maybe you are looking for