Data copy from infocube to infocube in two different BW systems

Dear All,
If i have a scenario like i have an infocube for sales in two different bw systems, and if i want to send the data from one infocube to another infocube what would be the strategy we have to follow. Is it that i need to send it as a flat file or is there any other mechanism with which i can send the data into the other infocube.
Yours answers would be rewarded.
Regards
Vijay

hi Vijay,
no, you have no need to send it as flat file if you have these 2 bw connected,
you can use datamart scenario, where one bw act as source system for the other bw, we have such discussion several times, you can check the steps
Loading data from cube1 to cube2
Loading data from one cube to another cube.
hope this helps.

Similar Messages

  • Differentiating Master Data from two different source systems

    Friends,
    i have used standard InfoObjects that provide master data for two InfoCubes which take data from two different source systems. Now the some of the master data is identical in both the source systems (example: 10 stands for "Industrial" in one whereas 10 stands for "Agricultural" in the other). What do i do so that the system(BW) differentiates the two.
    Thanks in advance for all the help.
    Mike

    I tried to include the 0SOURSYSTEM in the compounding of this InfoObject (for master data) but it gives me a list of other objects that use this InfoObject as a reference characteristic and also says that this InfoObject is used in a ODS and data needs to be emptied in the ODS before activating  this InfoObject.  Please let me know if there is any way out of it.
    Thanks
    Mike

  • I've purchased apps from the app store using two different Apple IDs. Any way to consolidate them?

    I've purchased apps from the App Store using two different Apple IDs. Is there any way to consolidate them under one ID?

    Sorry, John, according to Apple, it's not possible to merge accounts.
    See the 5th topic here >  Frequently Asked Questions About Apple ID

  • 'Howto' merge (consolidate) two different BW-Systems in one?

    Hi,
    actual we have two different BW System (BW-FI/CO and BW-CRM - both Version 3.5) which are installed on an own systems (historic grown).
    Now we want reduce our administration and hardware costs and our intention is to merge (consolidate) our two BW-Systems in one - using standard SAP transport method.
    Does anyone have any experience with merge of two and more BW Systems in one?
    Does anyone have a 'Howto Paper' about this topic?
    Thanks in advance,
    Ismet

    Hi Arun,
    thx a lot for your quick answer. My question was more 'merge/consolidate' of two BW-Systems as a 'System Copy'. I am trying to give you more information about our procedure:
    - we have two different BW-Systems - BW-System A and BW-System B
    - both BW-System have same Version and Support Package
    - we want to overtake ALL BW-Objects (InfoProvider, InfoObjects, Variables, etc......) from System B into System A
    - for this procedure we want use STMS (SAP Standard)
    - in second step we plan to transfer physical data from System B in to System A with Data Mart procedure (generate Export-Datsource in System B)
    Do you have (or anybody) any experience about this procedure?
    Thanks a lot and Best Regards.
    Ismet

  • Data tranfer from ods to infocube

    Hi Friends,
    I have created ODS and infocube, the data was loaded on ods sucessfully , but when tried to transfer the data from ods to infocube, the error comes. the update rules and data flows are shown correctly as in FUFU book.
    the errors comes as check the load and after that the infopackage ask to delete the init request in same cube.
    can anyone suggest the right way of tranferring the data from ODS to INFOCUBE and the issues to check.
    Kind Regards,
    Irfankhan

    Hi
    Recheck whether you have the request Activate data in ods (odsrcactivate data & Activate Data automatically while ods creation & odsmanageRequest tab -- request -- Activate)
    If the Data is there in Active Data table then try to update the same with Update Rules.
    While Info Package from ods--Cube -- the Info Package Selection should be Delta ( Init is already there in your cube as I have seen the error message you mentioned)
    the update From ods to Cube
    Via Info Package -- Data Target Tab -- Schedule it with options Delta --
    Info Package -- Monitor -- Update Manually (Wheel)
    Adding it in Process chain
    Hope it helps and clear

  • Data Extraction from ODS to Infocube

    Hi.
    How will you extract data from ODS to Infocube. what is process ?
    please explain....

    Hi,
    as the no.. of records arelot more then your usual loading ..
    so it will take mmuch more time today ..but make sure that the job is running fine..
    You can create load the data by creating selection  but at this point i dont think you can do this.. because for this you have to kill the job ..may be some changes would have been happened
    in the Ip thats why its picking more records..
    hope this helps you ...
    Reagds,
    shikha

  • Data transfer from ODS to InfoCube

    How to transfer data from ODS to InfoCube ? Where exactly do I have to create the
    Infopackage or is it auto-generated ?

    Hi,
    If you are using BI 7.0 then do the following:
    Create Transformation from ODS to Cube by right clicking on cube.
    then create DTP in cube and execute it.
    No need to create infopackage again.
    regards,
    Pruthvi R

  • How to load data from a flat file to two different tables at a time.

    I am not aware of Sql Loader so Please any body suggest me that is there any way to load data from excel sheet to two different tables at a time its very urgent.
    with regards,
    Srinivas.R

    Read Utilities Guide from the Oracle Documentation Library. See
    <br>
    Oracle Database FAQs
    </br>

  • Copy Version-Budget data copied from one version to another-How to view Data in Copied Version.

    Dear All,
    Budget Data is copied from one Version to another Version using Tools>copy Version option. How can you view Data copied to new Version, when you receive a message Version is successfully copied.
    I think we can do that by selecting appropriate version in the version dimension while accessing the Forms or in Smart View.
    Can you please let me know how to do this or different options available with this process.
    Thanks in Advance for your valuable time...

    A form to check the data with the correct POV, a Smart View query, excel addin retrieve, financial report, export data, report script, take your pick.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • VPRS copied from Sales Order to invoice is different

    Hi experts,
    I have a query in VPRS costs.  Below is the setting for VPRS.
    In MM03 “Acctg view” the Price Control is “S” & Std. Price is $10
    In item category TAN 'determine costs' is ticked
    In the cond type VPRS cond cat is g (cost)
    In Pricing Procedure below is selected for VPRS,
    statistical value :- checked
    subtotal :- B
    an requirement :- 4
    In Sales Order the VPRS copies correctly the std price $10. But when creating invoice VPRS shows $21.
    Is there some setting in the copy control?  Pls share your ideas.
    Thanks,
    Anne

    Hello,
    To achieve that the actual costs of the business transaction are included in the VPRS condition, the condition category must be 'G' - Cost. Only in this case, the costs may be taken from the goods issue (or the invoice verification, goods receipt or purchase order). Settings 'S' or 'T' take the value from the valuation segment of the material master only.
    Go to the detail display of the VPRS condition. If the condition control (KSTEU) is set to 'H', the cost was taken from the goods issue. If it set to 'A', it was redetermined from the valuation segment of the material master, in case of 'D' or 'E' it was copied from the preceding document.
    Reward points pls.
    Regards,
    Govind.

  • Data extraction from Non-Unicode ECC6 to Unicode SAP BI system

    Hi,
    We have an existing non-unicode ECC6 system. Currently we are installing SAP BI unicode system. Can anyone tell me are there any issues in data extraction for SAP BI from a non-unicode ECC6 system to an Unicode SAP BI system ?
    Please also note that our data consists of Asian (korean, Japanese & Chinese) fonts.
    Regards,
    Anirban

    Hi Des Gallagher,
    Thank you for your reply.
    I have gone through the notes suggested by you, but they suggest issues related to BW 3.x versions. We are currently on SAP_BW 700 - SP16. Also, among other notes i found note 510882 which might be helpful for custom developments.
    But i am still wondering whether we are going to face major issues related to data extraction from non-unicode ECC6 system to unicode SAP_BW 700 system.
    Incase you have any further details, please let me know.
    Thanks in advance.
    Regards,
    Anirban Kundu

  • ECC connecting to two different PI systems for proxy

    Hi All,
    We currently have a PI 7.1 system to which many client proxies are configured in the SAP ECC system.
    Now that we have installed a new PI 7.3 system we would like to make all new integrations in PI 7.3. Note that the ECC system would remain the same.
    (The idea is to migrate interfaces from PI 7.1 to PI 7.3 in a future date)
    In the same ECC system we need to configure client proxies to the newly installed PI 7.3.
    In SXMB_ADM we can only define one integration server for ECC system. Hence if we want to configure proxy to another PI system, we need to overwrite it.
    Since our current ECC system is 6.0, the workaround given by SAP through transaction SAOMANAGER for ECC 7.0 systemsdoes not apply.
    Kindly mention the alternative solutions/approaches available to configure ECC proxies to two separate PI systems.
    Thanks,
    John

    Hi John
    Have you checked this blog?
    Connect SAP Application System to multiple SAP PI Integration Server - Variant n°1
    Regards,
    Giuseppe

  • Can UWL are simontanously configure for two different sap systems ? How ?

    Hi,
    I am new in portal. Can any one tell me how to configure UWL . We have r/3 system as well as crm system. i want to show both UWL for both the system on one page.
    Please give ans in steps by steps.
    Please suggest me steps for that.
    Regards,
    Gurprit Bhatia
    Edited by: GURPRIT BHATIA on Dec 26, 2007 1:34 PM

    Hi GURPRIT,
    It is possible to display item from two different systems.
    All you need to do is create separate webflow connectors for the systems for which you required to configure the UWL and the systems must be available in the SLD.
    after creating the connectors register both of them and you can start receiving workitems from both the systems.
    reward if useful.
    Rgds,
    Vijay

  • Can i copy the entire data flow from one std-Infocube to a new RT Infocube

    Hi,
    I created a new Real Time Infocube , copy of an existing Standard Infocube. But is there any option to copy the entire data flow - like transformations, DSO and all that ?

    Hi,
    We can copy standard Infocube to Realtime Infocube ,it will work in BI7.0.
    The procedure is  1) Go to Context menu of Standard IC and select copy option.
                                 2)In Edit IC option select Real Time and create it ,it copies as real time info cube.
                                 3)But for Loading data,Go to context menu of Real time IC and select option Change Real Time Load Behavior
                                     we get 2 options the first one is  1)Real time data target can be loaded with data,planning not allowed ,if we select data will be loaded.
                                 4)if we go for second option that is 2)Real time data target can be planned , data Loading not allowed ,if we select this,it  is  used for planning that is comparison of data.
                                5) This is difference between standard and Real Time InfoCube.
    Thanks,
    Supriya@n

  • Data transfer from DSO to InfoCube

    hello,
    i'm a new user and just got into SAP.   i uploaded data from a flat file to my dso successfully and it is active.  now i am trying to practice and want to transfer the data to a cube. can someone tell the step-by-step how to do this?
    here are my steps:
    1. created transformation
    2. mapped the objects
    3. activated transformation
    4. created DTP and activated it
    5. clicked on execute. and then i keep on getting error while it was processing.
    error message: Error while updating to target ZNGSALDEL (type INFOCUBE)
    Message no. RSBK241
    DTP is able to get the data from DSO but cannot load to the cube.  can anyone help me out? or provide me steps on how to transfer data between DSO, Cube, and other DSOs.
    thanks.

    You would need to contact whomever is the SAP Support Portal administrator for your organization to get access to that environment. Depending on how your organizaiton has set it up, it could be someone from your Basis team, security or anyone else.
    Speak to whomever gave you access to BW and ask them who in your organization can get you an account for the SAP Support Portal (people who have worked on SAP for awhile, like me, refer to them as OSS accounts). Tell them that you need the ability to view OSS Notes on the SAP Support Portal. In order to apply the note, you will need to have an ABAP Developer Key, so you can ask for that as well or just ask someone on your Basis team to apply the note that I referenced previously.

Maybe you are looking for

  • ITunes could not connect to the iTunes Store "Error Message"

    I recently added iTunes 7.6 to my Windows XP operating system at the same time when I added an *Ion USB Turntable (TTUSB).* I currently have the 80G iPod with the larger video screen. I added in the supplied software of the EZ Vinyl Converter. The so

  • How to select a different language dictionary?

    I'm using Pages 2.0.2 and I'm writing a document in Spanish. The default spell check is English, so I go to Edit -> Spell -> Spelling (as suggested by the help), but alas! there is no dictionary option! In other programs that use the Mac OS X spellin

  • How can I track emailed pictures?

    I send out copies of iPhoto pictures to a group of kids from age 8 through 17.  It is a tedious task, and generally takes about 2-weeks to complete.  Is there a mechanism in iPhoto '11 that allows information that tracks which pictures have been sent

  • How to check the SC stock Assembly wise

    Hi All, We have a requirement, actually we want to see the SC stock at the vendor end, we are able to see the stock by MBLB t-code, but in this we can only see the raw materials with any reference to SFG. and in ME2O t-code we have to put the assembl

  • Oracle B2B Payload not delivered to partner through Generic HTTP channel

    Hi, We have a situation where the B2B payload is not delivered to the partner. Below are the steps we followed to set up the agreement and channels. 1. Created a document definition under "Custom" protocol and uploaded the XSD into the document defin