Data copy to from different scenario, version to one scenario version

Hi,
I have this scenario to do.
Copy data from 3 scenario version to one scenario version.
Scenario1 -> final to TargetScenario -> working
Scenario2 -> final to TargetScenario -> working
Scenario3 -> final to TargetScenario -> working
Means 3 scenario data into one
Sum of all three
I am using Datacopy command to target but this is wiping out previous scenario data
Any thoughts which command to use or else???

You cannot use DATACOPY here.
Create a calculation script which does fix on working
Target scenario= scenario1->final+scenario2->final+scenario3->final;
Regards
Celvin
http://www.orayplabs.com
Please mark responses as helpful/correct if applicable

Similar Messages

  • While copying photos from pc to ipad only one folder gets copied, while copying photos from pc to ipad only one folder gets copied

    while copying photos from pc to ipad only one folder gets copied and while trying for other folders, the previous one which copied earlier does not appear.

    Are you selecting all of the folders to sync?
    Note that if you deselect a folder it will be removed.

  • Copy Project to different CO Version down to activity level

    We have tried to copy a project from one CO version to another using transaction CJ9B, but it only copies to the WBS element level.  Is there a transaction that will copy a project to a different CO version that included components down to the activity level?
    Thanks, Rae

    In Cost Planning for CO version 0 (Plan version 0) in CJ40 you are planning costs at WBS level, not at activity level.
    So where the question of copying activity cost come?
    Activity costs come at activity level planning, not in plan version level.
    Which as mentioned can be copied by simulation version, project version.
    SSanjay

  • How to merge data in icloud from different devices into one before restoring?

    I have 2 devices listed on my icloud.
    Two of them are lost phones.  I want the data from both devices to be on my new iphone.
    It is easy enough to restore one of them (which I have done) but how do i know restore from the other one? 
    Is there any simple way to merge the data somehow?

    Hello!
    Unfortunately, it is not possible to merge 2 different back ups in one. However, if you need the photos and contacts from these back ups you can restore one and then import the pics to your PC and sync the contacts to iCloud then restore the iPhone from the other back up and merge the info with iCloud again.
    Best
    B.

  • CK11n with activity prices from different plan versions

    Hello,
    We are looking for a simple & practical way to calculate a standard cost estimate for a material using activity prices from different CO plan version.
    In the valuation variant of the costing variant the CO plan version is determined from where the activity prices are taken, eg version 0
    So, we want to cost the same material using the activity prices of a different plan version, eg 90, or 91 ... but without using a different costing variant per CO plan version(so without having to create/customize a separate costing variant per CO plan version)
    Is this possible? 
    Can we use costing versions in this respect?
    Many thanks
    Alain

    Hi,
    Thanks for quick feedback ... but how do you assign this valuation variant in the costing version... ?
    Can you enter is in CK11n? or what transaction needs to be customized?
    Thanks, Alain

  • Running managed servers from different WL versions under a domain

    Hi,
    Would it be possible to run managed servers (in non clustered way) from different versions of WebLogic under a single domain, with admin server of higher WebLogic version controlling the domain and the managed servers?
    Regards,
    Gobi

    Hi Gobi,
    we can make it run such a way but it may lead to many complication with patch sets.
    Few thing work in one environment and other will not so it is not at all recommended way to set such configuration.
    Regards,
    Kal

  • How to copy page from different workspace?

    hi guys,
    can anybody tell me how to copy page frm different workspace..??
    thxs
    regards,
    Kumar

    Firstly sorry if my handle appears as User10390457, I've changed it but it takes a little time to update.
    Kumar,
    You should import the entire application from where you want to copy the page into the workspace where you want to copy the page to. You will have to change the workspace id (called 'p_security_group_id') to the workspace id that you're importing into, in the export file. You will also have to assign a different application id when you're doing the import. Thereafter you can copy the page using the normal copy function in Apex.
    I hope this is clear enough.
    Good luck.
    Vis Naidu

  • How to update data in database from different region of the same page

    Hi,
    I have pepared two regions of tabular form based on the same table,each region is selecting different columns of the same table.
    I want to update the values from different regions in the database using single submit button.
    Regards
    Shashi

    I presume that the two regions are working fine with their individual buttons and your issue is how to make them both save with one button.
    Here is how
    a. You will have 2 ApplyMRU and 1 ApplyMRD processes for each of the regions. Right? Lets say you have 2 "Save" (i.e. label=Save) buttons, one has name SUBMIT and the other SAVE ( SUBMIT and SAVE being the requests that will be sent when they are clicked , respectively)
    b. Make the Display condition on one of the buttons 'Never'. Now it won't show when you run the page. Lets say you made SAVE's conditional Display 'Never'
    c. Go and change the condition on all ApplyMRU and ApplyMRD processes from "When Button Pressed" to "Request is contains in Expression1". In Expression1 enter SUBMIT,SAVERegards

  • How can I move all my bookmarks from different Firefox profiles into one area to organize them and then place them into the different Firefox profiles?

    How can I move all my bookmarks from different Firefox profiles (would like to move whole bookmark folders at once if possible) into one area to organize them and then place them into the different Firefox profiles? This is all under one window user account, I am using windows 8.1. Even if you have information on how to do it on a different windows, it may still be helpful. Thanks for any input you have.

    Just a note about the difference between these two things:
    * "export" and "import" use an ancient HTML document format that all browsers can understand. When you import bookmarks, Firefox may place them into an Imported Bookmarks folder, or into Unsorted Bookmarks. This does not displace existing bookmarks, and Firefox does not automatically remove duplicates.
    * "backup" and "restore" use a more comprehensive JSON data file, which contains extra information about your bookmarks (such as tags) not contained in the traditional export file. HOWEVER, a restore completely replaces all existing bookmarks, so the restore feature cannot be used to merge in a set of additional bookmarks.
    Related support articles:
    * [[Export Firefox bookmarks to an HTML file to back up or transfer bookmarks]]
    * [[Import Bookmarks from a HTML file]]
    * [[Restore bookmarks from backup or move them to another computer]]
    Some users find the disk-based Windows Favorites folder a convenient way to organize bookmarks. If you do, too, and you do not need to preserve tags on your bookmarks, you could export each profile's bookmarks to HTML and import them all into IE11. Organize them in the Windows Favorites folder, then export from IE11 to HTML and import that file into each Firefox profile. See: [http://windows.microsoft.com/en-us/internet-explorer/add-view-organize-favorites].

  • Problems when copying item from a page to another one

    I am copying a value of an item, from a page to another one in branch, and it cuts the value to me in ' : '
    ej: item a = 08:00 Hs
    item b = 08
    thanks
    Juan Pablo

    I had to deal with the same thing and I know at least two solutions - one is "dirty" and the other one is a "clean":
    1. dirty - replace ':' (colon) with ';' (semicolon) and pass that value using URL. On the page, where your item(s) is, create a computation using REPLACE(P1_ITEM, ';', ':') on load and before header.
    2. clean - as Scott says and it works in many cases - pass only a primary key and a request to your target page and create there a procedure to fetch the values you need and populate the items
    If you use the documentation and search on keywords "COMPUTATION" and "REQUEST", you will find a lot of usefull information.
    Denes Kubicek

  • How can I copy contacts from torch to sim in one step?

    How can I select more than a contact from the contact list to copy to sim card?

    Plz any one help!!

  • Different QT Data Rates from Different FCP Versions

    My sound guy requires a Motion JPEG A version of my timeline, 320 x 240, 2 fields, odd dominance, at around a 1000-1500 kbit/sec data rate (no audio attached). When I did such conversions from FCP 4.5 / OS 10.3, the quality meter would have to be set to 70% to fit into his data rate requirement. I recently upgraded to FCP 5.0 / OS 10.4 and now I have to set the quality meter to around 15% to get the same data rate!!! What's going on? This quality is far too low for my sound guy to do his job.

    hi Magge,
                      Iam trying to learn  crm extraction could you please tell me the procedure of CRM Extraction?
    thanks,
    Sanjay

  • How to dynamically copy cells from different tables?

    Hi,
    I've created an invoice and have 2 different tables. First is at top with Recipient information, the invoice number, their address, etc. Below that, I have a 2nd table laying out the items they are being charged for.
    I would like to copy the invoice number from the 1st table, to a cell in the 2nd table or a 3rd table I will create later on. I know how to copy cells in 1 table, ie. =D4. But not sure how to target a different table altogether.
    Also, is it possible to copy a cell from 1 table to a text box field?
    Thanks!!

    Yvan's point is true.  Please use the User Guides first; they're actually pretty readable.
    However, there's a very quick & easy way to try it out as well.  Go to the cell where you want your data to end up.  Type "=" (without quotes) to indicate you're going to input a formula of some kind.  Then without clicking inside any tables, use the list of sheets and tables to the left to get to your source table and click on the cell that contains the data you want to copy.  Presto!  Go back to your destination cell, and the formula is now filled in, following the scheme Yvan provided.
    Vince

  • How to read data simultaneo​usly from different cdaq modules?

    Is there a way to synchronize input from separate cdaq modules?
    I need to read a voltage on an NI-9219 analog input channel and a
    frequency on an NI-9211 channel.  As far as I can tell a single "task" can
    only read input from channels on one module. Is there a way to build a task that reads data from multiple modules?
    Seems to me that buffered input is useless when multiple tasks are employed. With multiple tasks you get arrays of data that are sequential, not simultaneous. Is this correct? I'm thinking that the only way to
    get synchronized readings is to read each channel individually inside a
    loop. But this restricts the program to low speed data
    acquisition with  measurements that are spaced unevenly. Right?
    I want to create a data file with three columns: time, voltage,
    frequency. What's the best way to get these readings at the same
    instant?
    Referrence to a help document or tutorial would be great.
     thanks! 

    Synchronizing measurements of different types using separate cDAQ modules can be done by making sure that the physical channels for each module IO control are selected (and separated by commas). Please review the following Developer Zone article illustrating how this can be accomplished. Cheers
    1. NI-DAQmx: NI CompactDAQ Module Synchronization:  http://zone.ni.com/devzone/cda/epd/p/id/5259
    Regards,
    Ali M
    Applications Engineer
    National Instruments

  • Copying column from different table

    I want to copy the column of one table1 to table2 column with the condition to add the existing data not to replace
    Regards

    Sure ->
    satyaki>>
    satyaki>> CREATE TABLE emp_source
      2  AS
      3     SELECT * FROM emp;
    Table created.
    satyaki>>
    satyaki>> SELECT COUNT(*) FROM emp_source;
      COUNT(*)
            14
    satyaki>>
    satyaki>> CREATE TABLE emp_target
      2  AS
      3     SELECT * FROM emp WHERE ROWNUM <= 8;
    Table created.
    satyaki>>
    satyaki>> SELECT COUNT(*) FROM emp_target;
      COUNT(*)
             8
    satyaki>>
    satyaki>> BEGIN
      2     MERGE INTO emp_target et
      3        USING ( SELECT * FROM emp_source ) es
      4        ON    ( et.empno = es.empno )
      5     WHEN MATCHED THEN
      6     UPDATE
      7        SET et.ename  = es.ename
      8        ,   et.sal    = es.sal
      9        ,   et.mgr    = es.mgr
    10        ,   et.deptno = es.deptno
    11     WHEN NOT MATCHED THEN
    12     INSERT
    13        ( et.empno, et.ename, et.sal, et.mgr, et.deptno )
    14        VALUES
    15        ( es.empno, es.ename, es.sal, es.mgr, es.deptno );
    16 
    17     DBMS_OUTPUT.PUT_LINE(TO_CHAR(SQL%ROWCOUNT) || ' rows merged.');
    18  END;
    19  /
    14 rows merged.
    PL/SQL procedure successfully completed.Hope this will help.
    Regards.
    Satyaki De.

Maybe you are looking for