Data counter connection active

a noted stating "data counter connection active" keeps popping up.  what does this mean and how do i stop it?

05-Jul-2008 07:33 PM
omro wrote:
Ah, you mean the red "hang up" button, not the red "power" button.
The data connections are started by the email client connecting to check the email and not disconnecting after it checks. I wonder why it does that?
yes, the red hang up button, so the E71 has red power button, hmmm...
have you tried editing your General Profile to set warning tones off
you got IMAP on?
Message Edited by friedbrains on 05-Jul-2008 07:39 PM

Similar Messages

  • E71x - "Data counter connector active" Message

    I keep receiving this message which pops up on the screen and beeps once when it does so.  It happens during phone calls and just happened when I hung up.  All it says is, "Data counter connector active".  Could anybody please tell me what this message means?
    Thanks

    -When you are on a voice call, the data counter is off.
    -When you are surfing the web, etc., the data counter is on and if you have anything other than an unlimited data plan, the AT&T meter is running at something like 10 cents per KB.
    The annoying thing is that it is default set to let you know whenever the data counter is available.
    I have unlimited data, and changed one setting which seems to have cut down on the message:
    Menu >> Config >> Connection >> Data Counter >> Data Counter Connection
    Changing it from 'When Available' to 'When needed' seemed to cut down on the messages quite a bit.

  • Annoyed By Data Counter

    Hi, I'm new to this forum, so forgive me if I'm posting this question in the wrong section.  I recently purchased the new Nokia 6790/Surge.  It's my first Nokia phone, so maybe this isn't a new issue, but it is to me.  Every time I make a call, at the beginning of the call I'll get a "beep" and a message saying something about the "data counter being on hold", and as soon as the call is ended I get the "beep" again with another message saying something about the "data counter being active."  Not a huge issue, but personally I find it very annoying.  I have no idea what the data counter is (yes I know the name should be self explanatory), I just know I want it off.  Problem is, the only options I can find for the "data counter" are to use it either "when available", or "when needed". Both settings cause that annoying call interruption.  I see no way to turn it off entirely.  Does anyone know if this is possible?  Or at least fill me in on what exactly it's doing.  Thanks.

    If you asked for traffic counter check this link: http://blackberryfreaks.com/gprs-traffic-monitor.html
    There is a free GPRS traffic counter application

  • E90 Packet Data Connection Active

    When I make a phone call on the E90 I get a beep and then message "packet date connection active" both when I start the call and when I end the call.
    How can this message be supressed and what is causing it. I do have mail for exchange running, that is the only thing I know of running at the same time.

    As you noticed yourself your Mail for Exchange is running. This needs GPRS connection for syncing and the GPRS is on most of the time so when you make or end a call you get this message.
    If you have unlimited Data Package then nothing to worry.

  • Nokia X6 - Packet Data connection Active?

    Quite a lot of times (if not every time) I finish a phone call i get a box pop up on the screen witrh the message "Packet Data Connection Active"
    Any ideas what this means?  Is there something wrong in the settings I need to change?
    Thanks
    Ian

    My mobile is any time connect packet data .
    i cant understand problem
    please verify my proble m
    mob ############
    email :  _______@____.in
                  _______@____.in
     MODERATOR'S NOTE:
    We would like to inform you that we have removed your personal details (e.g. full name, mobile number, email address) as it is unwise to publish personal details on forums like this.
    We kindly ask you not to share personal information on this forum

  • Xcelsius - Crystal Report Data Consumer connection Issues

    Sorry for the long post but i hope with the full explaination, i can get a quick answer & solution.
    Using Crystal Reports 2008 and Xcelsius 2008 Engage, SQL 2008 stored procedure.
    I have tested the Crystal Reports Data Consumer connection within the Xcelsius program, using the following steps :
    1. Create a stored procedure that returns the Continent Name and the Count of Projects within each Continent.
    2. Create a Crystal Report using the stored procedure, 2 columns in the Details section, column names in the Page Header section.
    3. Save and export this as an Excel spreadsheet.
    4. Open the Xcelsius program, new file and import spreadsheet. Column A is the Continent Name, Column B is the Count.
    5. Without altering the spreadsheet, I created a graph using the data imbedded. i.Bar Graph, series and row selections. Ii. Pie chart with row data selection. Iii.Column data as series and row selections.
    6. Created a Crystal Report Data Consumer connection using the data imbedded within then spreadsheet. The column A as the u201CRow Headersu201D & column B as the u201CDatau201D. Took quite a while to get the right combination of selected components so that the preview actually showed the data and the corresponding data labels. The Legend still hasnu2019t shown up.
    7. Save and Export as Flash (swf) file.
    8. Close Xcelsius and open Crystal Reports.
    9. Open the same report used to create the spreadsheet and Insert -> Flash, choosing the newly created swf file.
    10. Link the data displayed On the Crystal Report to the Flash file now embedded, using the Flash Expert. Have tried both with the data listed on the Report, and the data listed as the result of the stored procedure.
    11. Previewed and the Data shown on the Graph does match the data listed within the Details section of the Report.
    12. I then altered the stored procedure to add u201C1u201D to all counts, and refreshed the Crystal Report. (I cannot add new data to the underlying database/tables, due to various other folks & projects using that same database.)
    13. The listed data does change to match the changes within the procedure.
    14. The Data labels on the Graph do change to match the changes within the procedure.
    15. The Actual Displayed Data within the Graph Does Not change to match the changes within the procedure.
    I have attempted this with a pie chart, a bar and column charts with the same affect.
    I have searched the web, printed out 4 different examples on how to make this work and still it is hit or miss. I still can not get the legend to show up, either in the preview or the within the Crystal Reports. When I preview the graph before adding the Crystal Report Data Consumer connections, it does work.
    Please someone tell me, What am I missing here ? 
    Thanks in advance for your help.

    http://www.****************/Tutorials/BI/Xcelsius/Index.htm
    http://www.resultdata.com/Company/News/Newsletter/2008/aug/Articles/Xcelsius/Using%20the%20Xcelsius%20Crystal%20Report%20Data%20Consumer.htm
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10161e25-c158-2c10-3086-ad502098b36b?QuickLink=index&overridelayout=true
    http://codesforprogrammers.blogspot.com/search/label/How%20to%20suppress%20blank%20row(s)%20in%20detail%20section%20of%20the%20report%3F
    http://www.businessobjects.com/pdf/product/catalog/crystalreports/cr_xc_integration.pdf

  • Data counter app - x6 ?

    Hi, is there any app that counts data on 3G/GPRS connection for present amd past month?
    Internal data counter keeps only information for last 30days, and when I'm in a middle of month data are mixed, I can't see only data for present month.
    I found some app "data quota" which is pretty stupid app, this app requires manual reset of system data counter at beggining of month to work properly !?! 
    Is there any proper data counter app which is for a change, smart?

    I will answer to myself :-)
    NetQin Mobile Guard can do a lot of stuff, and count data

  • Data packet connection received

    On a fairly regular basis, once an hour approx, my N86 beeps and a message appears on the screen stating that a " data packet connection received". This also happens when I'm on a call and beeps in my ear.
    This is only a minor annoyance but an annoyance nevertheless. Any idea what this is and what I can do about it?
    Solved!
    Go to Solution.

     also have this problem with my N5800. I have noticed on my phone bill that I have connected to the internet every 30 min.
    When I hold the menu button to see what apps are active I only ever see the "home" and "menu" logo. In my Admin settings>Packet data>Packet data connection the only options are "When needed or when available"
    How is the best way to find out what app is connecting to the internet and sky rocketing my bills!!
    Nokia 5800 XpressMusic / FW 50.0.005

  • N8 Data Counter

    Hello.
    Where I can find the n8 Data Counter, if exists?. I´ve read in many places something like this: " Data Counter: Open call log and tap on right tab to view data transfer log"... but i can´t find "the tap on the right"
    Thanks
    Solved!
    Go to Solution.

    Wap only. S60 V5 had Wifi and Wap but Symbian^3 has only wap. it is logical since you worried about data usage only via wap. you can see the data usage of individual connection by going to all communications tab it will show everything, but again i miss the filter option by selected type of communication  which was available in V5. it is missing since you have no way to select each communication as in V5 (interface logic) 

  • How do I get my data counter back on my home page

    How do I get my widget for data counter on my home screen

    Depending on the phone you have, the widget will either be in the widgets section of your app drawer, or you'll long-press an empty space on your home screen and then see the widgets folder at the bottom of the screen.  Once you're in the widgets folder, find the widget, long-press it, and drag it to where you want it on the home screen, then let go.

  • No data in the activity monitor

    All of a sudden I don't have any data in the activity monitor. Here's what happened. I was using safari viewing online pictures. I kept getting the rolling ball between pictures and noticed that safari was using 100%+ in processor usage and safari seemed slow. So I rebooted and opened the activity monitor and no data shows up. I run a quick hardware test and all pass. I havn't gone back to the pictures yet but normal browsing seems to be fine. I watch a few 1080P trailers and they work fine too.
    All ideas on why the monitor doesn't show data?
    Ray

    Hmm...let's try this:
    Go to User/Library/Preferences and drag the com.apple.ActivityMonitor.plist file to your Desktop. Then try launching Activity Monitor again to see if that makes anything show up. If so, then it was a corrupted preferences file, and you can then trash the one on your Desktop.
    If that doesn't solve the problem, the only thing I can suggest is to Trash the application and the preferences file, then reinstall it from your 10.4 DVDs.
    Mulder

  • SAP Crystal Reports data source connection problem using sap business one

    Hi,
    I m facing a problem regarding: SAP Crystal Reports data source connection problem using sap business one
    I am trying to create a Crystal report but when I try to configure a new connection it does not work.
    I select Sap Business One data source and try to complete the information required to connection but it does not list my companies databases, what is the problem?
    Our Current SAP related software details are as follows:
    OS: Windows Server 2008
    SAP B1 Version: SAP B1 9 (902001) Patch 9
    SAP Crystal Report Version: 14.0.4.738 RTM
    Database: MS SQL Server 2008 R2
    I have also added some screenshots of the issues.
    Please have a look and let me know if you have any questions or any further clarifications.
    I m eagerly waiting for a quick and positive reply.

    Hi,
    There is problem with SAP Business One date source.
    I had faced same problem, I used OLEDB Data-source, and it worked fine for me.
    So, try to use OLEDB.
    Regards,
    Amrut Sabnis.

  • No data in Daily Activity Report

    Hi expert,
    There was no data in Daily Activity Report. But I changed the interval to 'Hourly', it displayed normally.
    Why?
    the version is 7.0 SP17
    Regards,
    Sidney

    Hi Raghu,
    That is what I do, but also no data.
    Does it need to set 'Save interval (minutes)' to 1440 in 'com.sap.portal.activityreport.core'?
    Regards,
    Sidney

  • Nokia Lumia 900 Data Counter and People Tile

    Is there a data counter on the Lumia 900 that I can't find? I've tried to call the 3282 data number, and it always tells me I'm at 0 even though I know i've been on the data network and not wifi.
    Also, can someone explain to me how much data something like the people tile/email account setup uses? I've never understood apps like that coming from suuper old phones. Is it constantly checking your email/facebook? On some time interval? I'd really like to set up facebook and such with the people tile because it seems really nifty, but I don't want to go over my 2gb plan. I just don't terribly understand how it all works, and i'd be willing to try it out if I could see how much data i'm using..but that goes back to my first question...In the past when checking email/facebook I'd always just use the internet browser on my old Nokia e71x, and it wasn't giving me updates in real time like I know this guy is capable of. I'd like to use it, I just don't wanna eat up my data plan. Thanks for any wise words!
    Solved!
    Go to Solution.

    The email setting can remain always-on and email arrives instantly like a Blackberry if you set the synchronization settings to "as items arrive" for the email setup.  There will also be a very small data usage checking for changes on various Windows Live services such as Calendar for changes so it can sync the data to the phone, or vice versa.
    The People Hub tile uses existing picture thumbnails already stored on the phone from your contacts profile pictures and Twitter and the first profile picture it finds on your friends profile pictures on Facebook.  Once the thumbnails are on the phone it doesnt use any more data.
    It doesnt use any data to check for Facebook or Twitter until you go into the People Hub and swipe the screen into the "Whats New" section then it displays new Twitter and Facebook posts which have happened since you last checked it.  Although if you have set Twitter and Facebook to email you when you receive a mention or interaction and you have your email set to receive messages instantly then you will have realtime alerts for those important things.
    When you swipe to the "All" section of the People Hub and click on your picture it then gives you the option to post a message to Twitter / Facebook or Windows Live all at the same time, or selecting each checkbox for individual social networks if you only want to post a message to one or two not all.  In this section you can also Check-In which places a Bing Maps location of the place you are using the GPS system.  The Messaging system is persistent always-on and displays any contacts that are online on your Facebook chat and Windows Live Messenger if you have set it up, which when you receive a message is text only so uses very little data.

  • How to read data in CRM Activity relationship tab.

    Hello friends,
    I have a requirement to read data from CRM Activity relationship tab.
    Mainly i have to read Transaction No/object refernced trans field of CRM Activity relationship tab.
    Could anybody help me?
    Thanks,
    Bunny

    Hi,
    have you found in the meanwhile a good solution?
    I have also a similar requirement.
    At the moment I'm using the view CRMV_ACTFORGP to get the activities associated to a BP (by the way you have many filters that can be used) and then for each GUID (order guid - CRMD_ORDERADM_H-GUID) I call the fm BAPI_REL_GETRELATIONS to get the list of relationships.
    Regards
    Diego

Maybe you are looking for

  • Performance issue with high CPU and IO

    Hi guys, I am encountering huge user response time on a production system and I don’t know how to solve it. Doing some extra tests and using the instrumentation that we have in the code we concluded that the DB is the bottleneck. We generated some AW

  • Keynote exports to low quality PDF file

    I exported my presentation to PDF file which looked perfect on my laptop screen. But when the presentation was projected on a large conference screen it looked awful - not contast and not well-readable. Does anybody know how to increase the quality o

  • Job  ZINF_TRANS_ACK_FILE_CITI is not active- Cancellation not possible!

    hi, one job is in ready state from long time and unable to stop/delete. Error is like job is not active- cancellation not possible. Kindly someone suggest me how to cancel the job on priority. Thanks in advance!! Regards, Jeevan Reddy

  • Error in processing the idoc

    hi, i modelled a idoc-jdbc scenario and relased an idoc from the r/3 system......but in the <b>message monitoring of the runtimework bench</b> i see an error....the details of the error are as follows <i>Service cannot be reached What has happened? U

  • OLE Method SAVEAS

    Hi, I am using OLE to open and save an excel file in a different format. But the code is not working. This is the code I am using: INCLUDE ole2incl. DATA file_in TYPE rlgrap-filename. DATA file_out TYPE rlgrap-filename. DATA excel TYPE ole2_object. D