Data (.dat) download and upload from a PC in background

Hi All,
In my program of R/3, I have used in last ws_download for downloading a .dat file (after processing) to my local machine and I have a similar ws_upload function module used in ISU to populate/update records in the (mirror image type) table in ISU(both different system and server).
Now file is created in default path set and name is sy-datum with some variable, after my program in R/3 is executed and after this I am suppose to run upload function module program in ISU to update/populate data in the table maintained here. there are few condition and logic check before data is updated / inserted in ISU. here also it takes that file directly from the default set path and sync file name. (i.e. no user interaction for file & location selection)
Now the problem is, the data file was not getting downloaded, when the program was run in back ground. and nor the program to upload works when run in back ground. so I came to know that these two function modules dont run in backgroud.
So can anybody provide me with an alternative.
Also these programs would be scheduled daily after 12 midnight in back ground mode only.
Awaiting for your answers
Thanks

Hi All,
Finally I was able to fix my problem of transferring data across the two diff servers.
As suggested by few I used Open & Close dataset, to put data file on respective directory on application server. ( both R/3 and ISU ).
Now to transfer a data file, we wrote a shell script (xxx.sh) in the same directoy of application server, where the ftp command, target ip, user, dest loc, 'PUT' command & file name to be trasnferred coded. Then External Command (check out Tx sm69 & sm49 ) was assigned in SAP to this shell script.
Now after my program executes Open dataset i.e writing a file on appl server, i call a function module SXPG_EXECUTE_COMMAND, where in i pass external command name (note - authorization needed to execute this function module).
Upon execution it will write on appl server (R/3) and transfer the file to ISU appl server dest location.
To add, prog now very well runs in background.
Regards.
Message was edited by:
navin devda

Similar Messages

How to see data being downloaded and uploaded by Mac?

hey guys, i just saw a screenshot of a Lion desktop which had the user's memory usage, data being downloaded and uploaded and CPU usage at the top right near the clock. i was just wondering how i could get this on my desktop.
thanks

Yes it is is like a small istat..Same developers,same website,i see you didn't check muck ...
Here it is anyways:
http://www.islayer.com/apps/istatnano/

I need the Log Report for the Data which i am uploading from SAP R/3.

Hi All,
I am BI 7.0 Platform with Support Patch 20.
I need the Log Report for the Data which i am uploading from SAP R/3.
I extract the DATA from R/3 into BI 7.0 DSO where I am mapping the GL Accounts with the FS Item. In the Transformation i have return a routine on the FS Item InfObject . I am checking the Gl code into Z table for the FS Item .
I capture the FS item from the Z table then update this FS item to Infobject FS item.
Now i need to stop the Data upload if i do not find the GL code in the Z table, and generate report for all GL code for which the FS item is not maintained in the Z table.
Please suggest.
Regards
nilesh

Hi.
Add a field that you will use to identify if the GL account of the record was found in the Z table or not. Fx, create ZFOUND with length 1 and no text.
In your routine, when you do the lookup, populate ZFOUND with X when you found a match (sy-subrc = 0) and leave it blank if you don't find a match. Now create a report filtering on ZFOUND = <blank> and output the GL accounts. Those will be the ones not existing in the Z table, but coming in from your transactions.
Regards
Jacob

Hierarchy download and upload

Hi experts,
i want to download hierarchies from production bw to development bw. pls explain me the procedure how to do. as i understand hierarchies will be in the r/3 system. then how do i download them and upload them to the required box in bw. is there any function module for downloading and uploading hierarchies.
Pls help.....

Hello,
To execute the program you have to run it in transaction se38.
Check if you have it since it is Z you might not have it.
If you don't find it create in se38 a new program with the following code:
*& Report Z_SAP_HIERARCHY_DOWNLOAD                                    *
* SAP Consulting BW Tools:
* Download hierarchy into a flat file. The file has the correct format
* for uploading into BW via a hierarchy InfoSource (IDOC).
* (c) SAP AG 2003-2004 MFB, SAP Labs LLC
* created: 2003-07-23
* last update: 2004-05-02
* Text elements:
* P_DATES Include from/to dates
* P_DATETO Valid-to date
* P_FNAME File name
* P_HIENM Hierarchy name
* P_INTER Include from/to leaves
* P_IOBJNM InfoObject
* P_LANGU Language
* P_VERS Hierarchy version
REPORT z_sap_hierarchy_download.
TYPE-POOLS: rs, rsdm, rrh1.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS:
p_iobjnm TYPE rsdiobjnm MEMORY ID rsc.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME.
PARAMETERS:
p_hienm TYPE rshiedir-hienm,
p_vers TYPE rshiedir-version,
p_dateto TYPE rshiedir-dateto,
p_langu TYPE rshiedirt-langu.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME.
PARAMETERS:
p_fname LIKE rlgrap-filename,
p_dates AS CHECKBOX DEFAULT 'X',
p_inter AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK b3.
* File structure
TYPES:
* No dates/intervals
BEGIN OF y_s_hierfile_1,
nodeid TYPE rshienodid,
iobjnm TYPE rsiobjnm,
nodename TYPE rsnodename,
* tlevel TYPE rstlevel,
link TYPE rslink,
parentid TYPE rsparent,
childid TYPE rschild,
nextid TYPE rsnext,
langu TYPE langu,
txtsh TYPE rstxtsh,
txtmd TYPE rstxtmd,
txtlg TYPE rstxtlg,
END OF y_s_hierfile_1,
y_t_hierfile_1 TYPE STANDARD TABLE OF y_s_hierfile_1,
* With dates
BEGIN OF y_s_hierfile_2,
nodeid TYPE rshienodid,
iobjnm TYPE rsiobjnm,
nodename TYPE rsnodename,
* tlevel TYPE rstlevel,
link TYPE rslink,
parentid TYPE rsparent,
childid TYPE rschild,
nextid TYPE rsnext,
dateto TYPE rsdateto,
datefrom TYPE rsdatefrom,
langu TYPE langu,
txtsh TYPE rstxtsh,
txtmd TYPE rstxtmd,
txtlg TYPE rstxtlg,
END OF y_s_hierfile_2,
y_t_hierfile_2 TYPE STANDARD TABLE OF y_s_hierfile_2,
* With intervals
BEGIN OF y_s_hierfile_3,
nodeid TYPE rshienodid,
iobjnm TYPE rsiobjnm,
nodename TYPE rsnodename,
* tlevel TYPE rstlevel,
link TYPE rslink,
parentid TYPE rsparent,
childid TYPE rschild,
nextid TYPE rsnext,
leafto TYPE rsleafto,
leaffrom TYPE rsleaffrom,
langu TYPE langu,
txtsh TYPE rstxtsh,
txtmd TYPE rstxtmd,
txtlg TYPE rstxtlg,
END OF y_s_hierfile_3,
y_t_hierfile_3 TYPE STANDARD TABLE OF y_s_hierfile_3,
* With dates/intervals
BEGIN OF y_s_hierfile_4,
nodeid TYPE rshienodid,
iobjnm TYPE rsiobjnm,
nodename TYPE rsnodename,
* tlevel TYPE rstlevel,
link TYPE rslink,
parentid TYPE rsparent,
childid TYPE rschild,
nextid TYPE rsnext,
dateto TYPE rsdateto,
datefrom TYPE rsdatefrom,
leafto TYPE rsleafto,
leaffrom TYPE rsleaffrom,
langu TYPE langu,
txtsh TYPE rstxtsh,
txtmd TYPE rstxtmd,
txtlg TYPE rstxtlg,
END OF y_s_hierfile_4,
y_t_hierfile_4 TYPE STANDARD TABLE OF y_s_hierfile_4.
* Hierarchy definition
DATA:
g_s_hiesel TYPE rsndi_s_hiesel,
g_s_hiedir TYPE rsndi_s_hiedir,
g_subrc TYPE sy-subrc,
g_t_hiedirt TYPE TABLE OF rshiedirt,
g_s_hierstruc TYPE rssh_s_htab,
g_t_hierstruc TYPE TABLE OF rssh_s_htab,
g_s_thiernode TYPE rsthiernode,
g_t_thiernode TYPE TABLE OF rsthiernode WITH KEY langu hieid objvers
nodename,
g_s_hierintvl TYPE rssh_s_jtab,
g_t_hierintvl TYPE TABLE OF rssh_s_jtab WITH KEY hieid objvers nodeid,
g_s_message TYPE rsndi_s_message,
g_t_message TYPE TABLE OF rsndi_s_message,
g_s_chavlinfo TYPE rsdm_s_chavlinfo,
g_t_chavlinfo TYPE rsdm_t_chavlinfo.
* File
DATA:
g_fname TYPE string,
g_struct_s TYPE string,
g_struct_t TYPE string,
gr_s_file TYPE REF TO data,
gr_t_file TYPE REF TO data.
FIELD-SYMBOLS:
<g_langu> TYPE ANY,
<g_s_file> TYPE ANY,
<g_t_file> TYPE STANDARD TABLE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_iobjnm.
CALL FUNCTION 'RSD_IOBJ_F4'
    EXPORTING
      i_show_cha    = rs_c_true
      i_objvers     = rs_c_objvers-active
      i_hietabfl    = rs_c_true
    CHANGING
      c_iobjnm      = p_iobjnm
    EXCEPTIONS
      illegal_input = 1.
CHECK sy-subrc = 0.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_hienm.
DATA:
l_s_hiertxt TYPE rrh1_s_hiertxt,
l_t_hiertxt TYPE rrh1_t_hiertxt.
CALL FUNCTION 'RRH1_HIERARCHY_HELP_VALUES_GET'
    EXPORTING
      i_iobjnm          = p_iobjnm
      i_dateto          = p_dateto
      i_hienm           = p_hienm
      i_version         = p_vers
    IMPORTING
      e_t_hiertxt       = l_t_hiertxt
    EXCEPTIONS
      no_f4_available   = 1
      dialogue_canceled = 2
      OTHERS            = 3.
CHECK sy-subrc = 0.
READ TABLE l_t_hiertxt INTO l_s_hiertxt INDEX 1.
CHECK NOT l_s_hiertxt IS INITIAL.
p_hienm = l_s_hiertxt-hienm.
DATA:
l_s_dynpfields TYPE dynpread,
l_t_dynpfields TYPE STANDARD TABLE OF dynpread.
CLEAR: l_t_dynpfields, l_s_dynpfields.
l_s_dynpfields-fieldname = 'P_VERS'.
WRITE l_s_hiertxt-version TO l_s_dynpfields-fieldvalue.
APPEND l_s_dynpfields TO l_t_dynpfields.
l_s_dynpfields-fieldname = 'P_DATETO'.
WRITE l_s_hiertxt-dateto TO l_s_dynpfields-fieldvalue.
APPEND l_s_dynpfields TO l_t_dynpfields.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
    EXPORTING
      dyname     = sy-repid
      dynumb     = sy-dynnr
    TABLES
      dynpfields = l_t_dynpfields.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname.
DATA:
l_filename1 TYPE string,
l_filename2 TYPE string,
l_path TYPE string,
l_fullpath TYPE string,
l_action TYPE i.
l_filename1 = p_fname.
CALL METHOD cl_gui_frontend_services=>file_save_dialog
EXPORTING
window_title = 'Select Download File'
default_extension = 'txt'
default_file_name = l_filename1
file_filter = 'All Files (*.*)|*.*|Text files (*.txt)|*.txt'
CHANGING
filename = l_filename2
path = l_path
fullpath = l_fullpath
user_action = l_action
EXCEPTIONS
cntl_error = 1
OTHERS = 2.                                               "#EC NOTEXT
CHECK sy-subrc = 0.
CALL METHOD cl_gui_cfw=>flush.
IF l_action = 0.
    p_fname = l_fullpath.
ENDIF.
INITIALIZATION.
GET PARAMETER ID 'RSC' FIELD p_iobjnm.
START-OF-SELECTION.
* Check input
CHECK NOT p_fname IS INITIAL.
IF p_langu IS INITIAL.
    p_langu = sy-langu.
ENDIF.
IF p_dateto IS INITIAL.
    p_dateto = '99991231'.
ENDIF.
* Read hierarchy
CLEAR g_s_hiesel.
g_s_hiesel-objvers = rs_c_objvers-active.
g_s_hiesel-hienm = p_hienm.
g_s_hiesel-version = p_vers.
g_s_hiesel-iobjnm = p_iobjnm.
g_s_hiesel-dateto = p_dateto.
CALL FUNCTION 'RSNDI_SHIE_STRUCTURE_GET'
    EXPORTING
      i_s_hiesel        = g_s_hiesel
      i_no_nodenm_table = rs_c_true
    IMPORTING
      e_s_hiedir        = g_s_hiedir
      e_subrc           = g_subrc
    TABLES
      e_t_hiedirt       = g_t_hiedirt
      e_t_hierstruc     = g_t_hierstruc
      e_t_thiernode     = g_t_thiernode
      e_t_hierintvl     = g_t_hierintvl
      e_t_message       = g_t_message.
IF g_subrc <> 0.
    READ TABLE g_t_message INTO g_s_message INDEX 1.
    IF sy-subrc = 0.
      MESSAGE ID g_s_message-msgid TYPE 'I' NUMBER g_s_message-msgno
      WITH g_s_message-msgv1 g_s_message-msgv2
      g_s_message-msgv3 g_s_message-msgv4.
    ELSE.
      MESSAGE ID 'RSBO' TYPE 'I' NUMBER 899
      WITH 'Hierarchy read error'.
    ENDIF.
    EXIT.
ENDIF.
* Defined output structures
IF p_dates IS INITIAL AND p_inter IS INITIAL.
    g_struct_s = 'Y_S_HIERFILE_1'.
    g_struct_t = 'Y_T_HIERFILE_1'.
ELSEIF p_dates = 'X' AND p_inter IS INITIAL.
    g_struct_s = 'Y_S_HIERFILE_2'.
    g_struct_t = 'Y_T_HIERFILE_2'.
ELSEIF p_dates IS INITIAL AND p_inter = 'X'.
    g_struct_s = 'Y_S_HIERFILE_3'.
    g_struct_t = 'Y_T_HIERFILE_3'.
ELSE.
    g_struct_s = 'Y_S_HIERFILE_4'.
    g_struct_t = 'Y_T_HIERFILE_4'.
ENDIF.
CREATE DATA gr_s_file TYPE (g_struct_s).
ASSIGN gr_s_file->* TO <g_s_file>.
CREATE DATA gr_t_file TYPE (g_struct_t).
ASSIGN gr_t_file->* TO <g_t_file>.
* Nodes
REFRESH <g_t_file>.
LOOP AT g_t_hierstruc INTO g_s_hierstruc.
    CLEAR <g_s_file>.
    MOVE-CORRESPONDING g_s_hierstruc TO <g_s_file>.
* Texts for nodes
    READ TABLE g_t_thiernode INTO g_s_thiernode WITH TABLE KEY
    langu = p_langu
    hieid = g_s_hierstruc-hieid
    objvers = rs_c_objvers-active
    nodename = g_s_hierstruc-nodename.
    IF sy-subrc = 0.
      MOVE-CORRESPONDING g_s_thiernode TO <g_s_file>.
    ELSE.
* Texts for characteristic values
      REFRESH g_t_chavlinfo.
      CLEAR g_s_chavlinfo.
      g_s_chavlinfo-c_chavl = g_s_hierstruc-nodename.
      APPEND g_s_chavlinfo TO g_t_chavlinfo.
      CALL FUNCTION 'RSD_CHAVL_READ_ALL'
        EXPORTING
          i_iobjnm                  = g_s_hierstruc-iobjnm
          i_langu                   = p_langu
          i_dateto                  = p_dateto
          i_check_value             = space
          i_sid_in                  = space
          i_hieid                   = g_s_hiedir-hieid
          i_objvers                 = g_s_hiedir-objvers
        CHANGING
          c_t_chavlinfo             = g_t_chavlinfo
        EXCEPTIONS
          info_object_not_found     = 1
          routines_generation_error = 2
          check_table_not_existing = 3
          text_table_not_existing   = 4
          OTHERS                    = 5.
      IF sy-subrc = 0.
        READ TABLE g_t_chavlinfo INTO g_s_chavlinfo INDEX 1.
        IF sy-subrc = 0.
          MOVE-CORRESPONDING g_s_chavlinfo-e_chatexts TO <g_s_file>.
          ASSIGN COMPONENT 'LANGU' OF STRUCTURE <g_s_file> TO <g_langu>.
          IF sy-subrc = 0.
            <g_langu> = p_langu.
          ENDIF.
        ENDIF.
      ENDIF.
    ENDIF.
* Intervals
    IF g_s_hierstruc-intervl = 'X' AND p_inter = 'X'.
      READ TABLE g_t_hierintvl INTO g_s_hierintvl WITH TABLE KEY
      hieid = g_s_hierstruc-hieid
      objvers = rs_c_objvers-active
      nodeid = g_s_hierstruc-nodeid.
      IF sy-subrc = 0.
        MOVE-CORRESPONDING g_s_hierintvl TO <g_s_file>.
      ENDIF.
    ENDIF.
    APPEND <g_s_file> TO <g_t_file>.
ENDLOOP.
* Download output table
g_fname = p_fname.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      filename                = g_fname
      write_field_separator   = space
    TABLES
      data_tab                = <g_t_file>
    EXCEPTIONS
      file_write_error        = 1
      no_batch                = 2
      gui_refuse_filetransfer = 3
      invalid_type            = 4
      no_authority            = 5
      unknown_error           = 6
      header_not_allowed      = 7
      separator_not_allowed   = 8
      filesize_not_allowed    = 9
      header_too_long         = 10
      dp_error_create         = 11
      dp_error_send           = 12
      dp_error_write          = 13
      unknown_dp_error        = 14
      access_denied           = 15
      dp_out_of_memory        = 16
      disk_full               = 17
      dp_timeout              = 18
      file_not_found          = 19
      dataprovider_exception = 20
      control_flush_error     = 21
      OTHERS                  = 22.
IF sy-subrc = 0.
    MESSAGE ID 'RSBO' TYPE 'I' NUMBER 899
    WITH 'Hierarchy download successful!'.
ELSE.
    MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Diogo

Download and upload of file to server dir (AL11)

Hello,
I have a custom program that is downloading files from application server directory (they are like templates) to user local pc. User is then modifying such files and finally upload them in another AS directory.
The program is currently making use of FM's C13Z_FILE_DOWNLOAD_BINARY and C13Z_FILE_UPLOAD_BINARY.
There was no problem until hot packages have been implemented: now such FM's are returning an error saying:
Internal program error; (YDOWNLOAD SAPLC13Z 0 C13Z_RAWDATA_WRITE)
When in debug, it appears that the FM C13Z_RAWDATA_WRITE (called by the above mentioned FM's) is checking the calling program (sy-cprog) and if this latter is not within a list of standard programs (hardcoded), then the error is thrown.
My question is: Is there another way to download and upload files without such error? Could you please share the code?
Thanks a lot for help and suggestions!
Best regards,
JFlanders

Hello,
Please see note 1809258 - Internal program error; ( <program name> SAPLC13Z 0 C13Z_RAWDATA_READ )
A possibile solution is to use cl_gui_frontend_services class methods like gui_download and gui_upload, for instance:
TYPES: t_line(1) type x.
DATA: i_tab TYPE STANDARD TABLE OF t_line,
    i_wa(1) type x.
OPEN DATASET lv_file_appl FOR INPUT IN BINARY MODE.
DO.
CLEAR i_wa.
READ DATASET lv_file_appl INTO i_wa.
IF SY-SUBRC <> 0.
    EXIT.
ELSE.
    APPEND i_wa TO i_tab.
ENDIF.
ENDDO.
CLOSE DATASET lv_file_appl.
DATA: lv_fn TYPE string.
lv_fn = lv_file_name.
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
    filename                = lv_fn
    filetype                = 'BIN'
    append                  = ' '
CHANGING
    data_tab                = i_tab
EXCEPTIONS
    file_write_error        = 1
    no_batch                = 2
    gui_refuse_filetransfer = 3
    invalid_type            = 4
    no_authority            = 5
    unknown_error           = 6
    header_not_allowed      = 7
    separator_not_allowed   = 8
    filesize_not_allowed    = 9
    header_too_long         = 10
    dp_error_create         = 11
    dp_error_send           = 12
    dp_error_write          = 13
    unknown_dp_error        = 14
    access_denied           = 15
    dp_out_of_memory        = 16
    disk_full               = 17
    dp_timeout              = 18
    file_not_found          = 19
    dataprovider_exception = 20
    control_flush_error     = 21
    OTHERS                  = 24.
* old functioanlity
*    CALL FUNCTION 'C13Z_FILE_DOWNLOAD_BINARY'
*      EXPORTING
*        i_file_front_end       = lv_file_name
*        i_file_appl            = lv_file_appl
*        i_file_overwrite       = 'X'
** IMPORTING
**    E_FLG_OPEN_ERROR          = false
**    E_OS_MESSAGE              = lv_message
*    EXCEPTIONS
*      fe_file_open_error       = 1
*      fe_file_exists           = 2
*      fe_file_write_error      = 3
*      ap_no_authority          = 4
*      ap_file_open_error       = 5
*      ap_file_empty            = 6
*      OTHERS                   = 7
This is for the download, similarly should be done for the upload.
Hope this could help. Let me know if further details are needed.
Thank you and bye,
Flavio

Download and upload ztables

Hi sap gurus,
I need to to copy ztables from one server to another but not through transports.
Is there a way other than creating the tables in another server again.
Iam talking about something like downloading and uploading again just like what we do in scripts or smartformsI
Waiting for replies
Have a nice weekend

Hi Suchitra,
Did u go through this site,
www.dalestech.com
Here u can find a code sample ( Direct Download Enterprise version 1.3.1 ) which downloads the database table structure, but not the data in the table. It might give some hints for ur requirement.
Regards,
Sachidanand.B
Pls mark helpful answers.

I have the Jetpack 4GLTE, what is the Mbps download and upload speeds for this device?

I have the Jetpack 4GLTE, what is the Mbps download and upload speeds for this device?

The avgrage real speed will be more in the area of 25 to 38 Mbps You would need to be in a strong signal area with high grade cell tower service and low customer use to even reach 50 Mbps.
From Verizon page. Just be aware that using the MiFi 6620L can cost a lot of money. And you can thank the device's fast performance for that. In my testing around the San Francisco Bay Area, rathe device delivered blazing-fast download speeds that nged between around 10Mbps to around 40Mbps. At those speeds, you can burn through 4GB of data in just less than an hour. Once you reach the cap, of course, you'll have to pay somewhere between $10 to $15 for each additional gigabyte, depending on the plan you sign up for.
For more information follow link: Verizon Ellipsis Jetpack MHS800L | Verizon Wireless

Download and Upload(!) ABAP-Source and DDIC-Objects?

Hi,
is there a standard transaction or third party tool
to download and upload(!!) ABAP-Source (function modules,
function groups, module pools, reports...) and DDIC-Objects
(tables, structures, data elements) to a local file system?
In terms of uploading these objects it would be desirable
that the transaction/tool creates packages/development classes/.. on its own.
I would need that to copy the same source and ddic-objcets to different customer systems without doing it "manually" everytime.
Does anyone know advice?
Thank you,
Bernhard

Hi Bernd,
look here :
Re: how to download pf-status and upload in another system
Andreas

Download and upload program

Hello to everybody,
I'm looking for a standard program that can download and upload program' source codes. I found the program REPTRAN (in SAP release 6.0) that can only download the source code (with the include as well), but i didn't find the upload one.
So, does anyone knows if exist a standard program that can download source codes (comprensive of include) and upload it as well?
Thanks and bye..

Hi,
Here is code which read the Programs & download:
Here Just pass the itab "SOURCE" into WS_DOWNLOAD.
function zuplt01f_tr.
*"*"Local interface:
*" IMPORTING
*"     REFERENCE(PROGRAM_NAME) TYPE SYREPID
*" TABLES
*"      SOURCE
data: f(240) type c,
        g type i,
        h(72) type c,
        low type i   .
read report program_name into source . " state 'A'.
describe table source lines count.
endfunction.
Raja T

How to download and upload a module pool program ?

hi i am a sudent.can anyone suggest me how to download and upload a module pool program?
Moderator message: please search for available information/documentation.
Edited by: Thomas Zloch on May 29, 2011 12:45 PM

Hi,
You cannot just download and upload module pool programs .
There are 2 different ways.
1. Copy all the includes and and create the same in the target system. You can download and upload the the Screen.
But GUI status you have to manually create.
2. If you have completely saved the module-pool program in one Workbench request(including Z tables u have used) in the original system ,just release the workbench request and copy the data file and co file and upload to the target system ( use CG3Y & CG3Z).
If the workbench is a Local Request save it in a Transport of copies and then move.
Regards
Aromal R

After hours of back-up, downloading and uploading...I am now updated with all the latest Mac software. However, I no longer have access to Excel and Word. Is there a way I can access my documents in either of those? Help, please.

After hours of back-up, downloading and uploading...I am now updated with all the latest Mac software. However, I no longer have access to Excel and Word. Is there a way I can access my documents in either of those? Help, please.

If you have older versions of excel and word that previously ran under the Rosetta emulator (allows PowerPC code to run on Intel system), they will no longer work with Lion.
You can use the Apple programs Pages and Numbers to access the files. They can be bought and downloaded from the App store. NeoOffice is available at http://www.neooffice.org/neojava/en/index.php which has Lion support. OpenOffice doesn't talk to Lion support, it's at http://www.openoffice.org/

PO header attachment download and upload

Hi All,
I have requirement to download the attachments attached at Purchase Orders(PO) header level . And then from the downloaded file , I further want to upload it to another target system.
I have already uploaded the PO at target system but header level attachments were missed out.
My source and target system is in Ver 4.6C
Please let me know -
1. All tables that are involved in storing the attachments at header level for purchase orders.With this I can upload attachments directly to the target system tables.
2.Any Function module for download and upload the attachments of PO at header level.
I will appreciate any help to do this .
Thanks
Deepak

Hi ,
Thanks for suggestion.I Have used FM SO_ATTACHMENT_INSERT to insert Attachment. SOOD table is getting updated. But still PO header level attachment is missing. I think FM only update the table SOOD and do not ensure to put the attachment to the right Purchase order.
Please let me know if you have an Idea how to put attachments to PO header level.Let me know tables that can be directly updated in order to attach the attachment to PO header level.
Thanks
Deepak

Download and Upload Modulepool program

hai all,
Could any one say how to Download and Upload Modulepool program from sap.
Thanks,
Jeevan.

Hi Puduru
Welcome to ABAP forums.
If you just want to export Module pool program once, you can use transaction SE80 and menu point Utilities->More Utilities->Upload/Download->Download option ( for each include / component ).
Save it as a text file and then repeat the same process.
Here's other programs for the same functionality. You can use one of them.
http://www.members.tripod.com/abap4/Upload_and_Download_ABAP_Source_Code.html
http://sap.ittoolbox.com/code/d.asp?d=1623&a=s
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/finding your code in bsp applications.article
http://www.geocities.com/rmtiwari/Resources/Utilities/WebViewer.html
http://www.dalestech.com/
Dont forget to rewards pts, if it helps ;>)
Regards,
Rakesh

Download and upload zcl_class

how i can download and upload zcl_class??

I copied - created - and ran program YRS_CLASS_UPLOAD_XML to try to upload xml i got from the internet on utilizing the new alv object model named refactoring.zip. When I run this program to try to upload, I get an error on statement in a method of CL_XML_DOCUMENT where is does a select single LO_CLASS from BDS_LOCL into l_class. If does not find the following types in the table BDS_LOCL for C_BDS_CLASSNAME value of CL_XML_DOCUMENT and C_BDS_CLASSTYPE value of CL. Any help at this point?

Download and upload structure

hi,
how to download and upload structure from one r/3 to another r/3 system .
<b><REMOVED BY MODERATOR></b>
regards,
anuj
Message was edited by:
Alvaro Tejada Galindo

Check my weblog...It might help you out -;)
<a href="/people/alvaro.tejadagalindo/blog/2006/03/14/taking-good-care-of-z-tables good care of Z tables</a>
Greetings,
Blag.

Data (.dat) download and upload from a PC in background

Similar Messages

Maybe you are looking for