Data deleted from Access appears to still be cached

Hi,
I have a simple routine that deletes data from a table in an access database.
All works well except I if I search on a item that has just been deleted it appears. If I perform another transaction in between then my search on the deleted data fails as it should.
Is the data being cahced somewhere? can I stop the deleted data from appearing?
Hope somebody can help.
Regards,
Adele

So you are saying that you do this:
1. Open a connection.
2. Delete a record.
3. Close the connection.
4. Open another connection.
5. Search for the allegedly deleted record...
and at this point you find the allegedly deleted record?
Also your mention of a "transaction" is a little confusing because Access does not support transactions in the strict database sense of the word.

Similar Messages

  • There are songs on my icloud that I deleted from my itunes, but still show up on icloud. I want to delete them from icloud, but can't since they don't appear in my itunes!

    I have a large library on icloud- 26203 songs is the count when I'm playing over my apple TV, but my itunes only shows 25989 songs. There are songs on icloud that no longer are in my itunes library, or show up in itunes as being on icloud. I want to delete these songs but can't figure out how. I have reset my itunes match on both my computer and my apple tv to no avail.

    No. It's on and I update it daily.
    When I talk about removing songs from my shuffle play, I'm referring to listening over apple TV. My cloud limit is nearly maxed out, so I am constantly removing/adding songs. That's why I was surprised when I went to delete a song I no longer wanted in the mix and was surprised to find it already deleted from my itunes, but still present in the cloud. I've signed in and out of itunes/and match on apple tv as well, but that didn't remove the tunes in question!

  • How to Restore Data Deleted  from Time Capsule Hard Drive

    This question is more about the time capsule in general as opposed to a specific time machine issue.
    I'm using my time capsule as an external hard drive that I can access wirelessly and I have accidentally deleted a folder. It didn't go into the trash can on the computer I used to delete the file from my TC, it just disappeared. I have data recovery software (Data Rescue III) but it is unable to locate the TC since it is not a plugged in device. I've tried connecting my computer to the TC via wireless, ethernet, and usb but Data Rescue still won't detect the TC.
    How can I get the files back? Is there a way to restore files deleted from the TC when it's being used as a hard drive (not as a time machine for backups)?
    THANKS!!!
    Message was edited by: jenniex
    Message was edited by: jenniex

    There is only one USB port on the back of the Time Capsule, and AFAICT from reading Apple's documentation, the only uses for that port are to connect an external hard drive or printer. You could try connecting that port to your Mac directly via USB cable, but nothing I can find indicates it would work, and you would be solely responsible if it somehow damaged either device (which may or may not even be a possible side effect).
    Unfortunately, if connecting the Mac to the Time Capsule via USB does not work, you're probably out of luck. Unless you are willing to crack open the Time Capsule, remove the hard drive and put it in an external enclosure so you can access it with Data Rescue, your data will remain lost. Note for the future that you absolutely *should not ever* keep original, un-backed-up data on a backup drive. It's poor organization and dangerous to boot.

  • Loading data only from access

    Hi,
    I just want to load data only from MS Access tables to oracle tables.I already have oracle tables. Can i do this with Oracle Migration workbench.
    Thanks

    Hi,
    The Oracle Migration Workbench can be used to migrate table data from your MS Access to your migrated Oracle database schema. The data can be transferred either online, using the Migration Wizard of the workbench or offline using SQL*Loader scripts generated by the workbench, to copy data from the source database to your destination Oracle database.
    You mention that you already have the Oracle tables. Did you use the migration workbench to migrate your Access MDB file to Oracle?
    If so, then you can do the following to load your data into the Oracle database using the offline capture method:
    1. Use the Exporter for MS Access tool (omwb<version>.mde) to extract the data from your Access MDB file. This generates .DAT files containing the table data.
    2. Launch the workbench, pointing to the repository containing the source and oracle model information for your Access MDB file. This will be the repository you used during the initial migration of your Access database to Oracle.
    3. Select the Oracle Model tab, then select a user schema in the Oracle Model that you want to migrate the data to.
    4. Select the associated "Tables" node of the tree.
    5. From the "Objects" menu, select the "Generate SQL*Loader Scripts.
    6. Use the generated SQL*Loader scripts to load the Access data, contained in the .DAT files generated in step 1 above, into the Oracle database.
    For further information on the steps outlined above, please refer to Chapter 6 Migration the Database of the Oracle Migration Workbench User's Guide, specifically
    section "Transferring the Data Offline". The User's Guide can be obtained in the /omwb/docs/usersguide folder of your omwb installation, or via the Help | User's Guide of the workbench.
    I hope this helps.
    Regards,
    Hilary

  • Data Deletion from PSA Tables

    Hi,
      I deleted 2 failed requests (10000000 Records) from PSA Tables because of the disk space issue for our BW System.
    RSA1—PSA –DELETE PSA DATA –
    The requests are deleted from the PSA, In BW in can see that there not requests in that particular PSA.
    But Basis/Database team raised an issue that the data has been added to the Database…
    What is this mean and how can I proceed with this
    Thanks

    Hi,
    Thanks for the info provided.
    So according to the info provided the Deleting the request from the PSA  marks as ‘To be Deleted’
    ‘When the last of all requests in one partition gets deleted,’ what do you mean by this.
    There are 2 requests in our PSA,I deleted 2 of them and in BW when I go to PSA there I don’t find any requests available in PSA.
    But our basis team complained that some data has been added to data base
    Thanks

  • BPM Process deleted from ESR / ID but still visible in SXI_CACHE

    Hi,
    We are having some issues with BPM where even after deleteing the BPM processes from PI  ESR and its corresponsing ID reference the processes are still visible in SXI_CACHE.
    Can any one point to how we can get the CACHE alligned to wht is in the ESR and ID.
    Regards,
    Arunava

    where even after deleting the BPM processes from PI ESR and its corresponding ID reference the processes are still visible in SXI_CACHE.
    It gets refreshed automatically may be not immediately but daily , if you check the SXI_Cache after some time the deleted one will not appear.
    It will be visible in SXI_CACHE,please check the return value it should be 0 not 99.
    Try creating the IP with some other name , copy the existing one with new name and import in ID and try.
    Regards,
    Srinivas

  • Data deletion from ODS

    Hi,
    I have deleted all the requests from the ODS. Even though it is showing some data lying in the ODS tables (i.e ODS -> Manage -> Contents).
    Can anyone please advise how these records are lying in the tables and not get deleted when I deleted all the requests ? Also Please help on how do we delete these records now ?
    Thanks & Regards
    Ramesh Ganji

    HI Ramesh,
    As A.H.P mentioned if u delete the data by right Clicking on the ODS and then Deleting the Data it should delete all the Data .
    If u have deleted by going to Manage ->request Tab and then manually selecting the Requests and deleting it . It will delete the data pertaining to the request u have selected . And if there is request not falling in the Request display range mentioned below in the same screen will not be deleted  . U can delete the Complete Request loaded by giving Ranage 1.1.1000 - 31.12.9999 .
    Another Possibility is , if u don't load the data via normal BW staging then u will not see the request in the Manage of DataTarget . For eg in APO data can be loaded to Cube via APO request by doing Copy history in APO and also request will not appear in Manage tab . to delete data from this DataTarget by right click on ODS and then selecting Delete data.
    Regards,
    Vijay.

  • Master Data Deletion from InfoObject

    Hi there
    I need to delete all masterdata in an InfoObject, however i get the message that not all masterdata can be deleted because it is still used.
    I have deleted all relevant cubes without luck.
    How do i find out where the masterdata is used??
    Chris

    Master data might be used in the queries as it might have been hardcoded in the selection criterion. Try to remove the selection criterion from the queries and it shoud do the trick.
    Second option would be:
    Use transaction SLG1, Give RSDMD as Object and MD_DEL as sub-object and press F8. That should help you!
    Cheers
    Saurabh

  • Data pull from Access

    Dear All,
               I am a BI developer.I have to get some data from Microsoft Access database to SAP BI 7.0 cube. How do I proceed beginning from recognizing the source system(Microsoft Access) in BI system.
    Regards,
    Ratish
    [email protected]

    Hi
    Refer this
    Using MS Access as a Data Source for BW
    Regards
    N Ganesh

  • Song deleted from hard drive but still on itunes?

    I recently deleted a folder full of duplicate songs that were intended to be backups so I could save space. Now, itunes still lists those files but it puts little exclamation points next to the song to tell me the original file can't be found.
    Here is the exact message:
    "The song 'x' could not be used because the original file could not be found. Would you like to locate it?"
    No! I don't want it found! But how do I remove the ghost file from itunes so I don't have all those duplicates??

    If you want to get rid of tracks with exclamation marks, you can do it by a crafty use of playlists:
    Using a playlist to collect dead tracks.
    Create new regular playlist – Playlist1
    Select whole library and drag to Playlist1
    Create new Smart Playlist with the rule: Playlist is not Playlist1
    This playlist should contain all the dead tracks
    http://discussions.apple.com/message.jspa?messageID=5696793#5696793
    Or Robert Jacobson has a script to do it:
    http://home.comcast.net/~teridon73/itunesscripts/

  • Datas deletion from Global Temporary table  when clear command is given

    Dear All,
    How to Delete datas from global temporary Table when clear command is given in forms
    Suggest me syntax..
    Pls help..
    Regards,
    Gokul.B

    http://psoug.org/reference/gtt.html
    Francois

  • Data transfer  from Access based programme to AR module

    We are using an access based program for cash collection, invoicing etc.An interface transferring the data end of the day to Oracle AR.
    But the interface not functioning properly. Sometimes data is not transferring, other wise wrong data is recording.Can you explain how oracle is working with other porgrammes.How I can integrate AR,PO and Inventory with Access program and ensure data transfer is correct.
    The below activities are integrated with Access Program.
    AR-Invoicing and cash collection by access program
    AP-Certain Purchase Order to be done automatically from the access program
    Inv-Stock Issue -Relating to sales is being done by Access from oracle inventory.

    Hi can you please let me know what are the concurrent request are used for transferring data from AR_PAYMENTS_INTERFACE_ALL into Oracle base tables.
    I am using Oracle 11.5.10.

  • How to reinstall window 8.1 when app data deleted from user folder

    due to fault i deleted my app data from user folder of c drive  due to this some apps and software not working prioperly so i want to reinstall my windos but it is not done  so help me to solve this problem of deleting app data

    Hi there 
    Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel. I understand that you deleted the App data from your profile and now apps are not working properly.  I am happy to assist with this. Please post the full product number for your notebook. See the following, if you need help with that information.
    How Do I Find My Model Number or Product Number?
    Also, was Windows 8.1 your factory installed operating system? I would recommedn that you backup any personal data, files, etc from the system before doing anything else. Then you can do a system recovery to restore the factory installation.
    Performing an HP System Recovery (Windows 8)
    Troubleshooting HP System Recovery Problems (Windows 8)

  • How to restore all data deleted from iPhone ?

    I did back up on iTunes but it didn't back up anything all data been deleted and I got install new clouds anyone knows how I could recover my contacts and my photos ? Anyone in Brisbane thanks

    Have you done a back up on your computer? If so your contacts and photos will be under the last saved back up. Have you checked there? If you havent backed it up on your computer then you are out of luck. Good luck.

  • Application deleted from Ipod Touch, but still in Library in Computer.

    How do you get the application from the library back to the Ipod Touch. I have deheted it from the Ipod because it was not working properly. Can I resync it back. So far it will not let me. Someone please help me. Thanks

    In iTunes, is the box next to the app checked?

Maybe you are looking for