Data deletion from ODS

Hi,
I have deleted all the requests from the ODS. Even though it is showing some data lying in the ODS tables (i.e ODS -> Manage -> Contents).
Can anyone please advise how these records are lying in the tables and not get deleted when I deleted all the requests ? Also Please help on how do we delete these records now ?
Thanks & Regards
Ramesh Ganji

HI Ramesh,
As A.H.P mentioned if u delete the data by right Clicking on the ODS and then Deleting the Data it should delete all the Data .
If u have deleted by going to Manage ->request Tab and then manually selecting the Requests and deleting it . It will delete the data pertaining to the request u have selected . And if there is request not falling in the Request display range mentioned below in the same screen will not be deleted . U can delete the Complete Request loaded by giving Ranage 1.1.1000 - 31.12.9999 .
Another Possibility is , if u don't load the data via normal BW staging then u will not see the request in the Manage of DataTarget . For eg in APO data can be loaded to Cube via APO request by doing Copy history in APO and also request will not appear in Manage tab . to delete data from this DataTarget by right click on ODS and then selecting Delete data.
Regards,
Vijay.

Similar Messages

Data deleted in ODS, data coming from the data source : 2LIS_11_VASCL

Friends,
I have situation :
Data deleted in ODS, data coming from the data source : 2LIS_11_VASCL.
when for the above ods and the data source when trying to delete the request whole data got delted.
All the data got deleted in the fore ground. no background job has been generated for this.
I ma really worried abt this issues. can u please tell me what should be the possibilities for this issue.
Many Thanks
VSM

Hi,
I suppose you want to know the possibilitiy of getting the data.
If the entire data is being deleted, you can reload the data from source system.
Load the setup table for your application. Then carry out init request.
Please note that you would have to take a transaction-free period for carrying out this activity so that no data is missed.
Once this is done, delta queues will again start filling up.

Error on activation of data records from ODS object

hi,
Kindly help with my BW Problem, the error occured on the
activation of ODS. The error says "Request
REQU_43MNOPW29W4F5M037J7OAFP52 in ODS ZPUR_O01 must have QM
status green before it is activated" and "Activation of data
records from ODS object ZPUR_O01 terminated"
I tried to check the data in the ODS Object by choosing
<LS>Administrator Workbench > data targets > context menu on ODS
Object ZPUR_O01 but the status are green and when i tried to
activate it the logs says "ODS object ZPUR_O01 was built
incorrectly. Cannot update request
REQU_43MODQ3GF69X17B71ZKQMN85I(20,154)
ODS object ZPUR_O01 was built incorrectly. Cannot update request
REQU_43MQ8A8F0L1US5COQTUUWX3BA(20,155)
ODS object ZPUR_O01 was built incorrectly. Cannot update request
REQU_43MQ8OQQTY21YQ37RMA1WMO06(20,156)
Data to be activated successfully checked against archiving
objects
Activation of data records from ODS object ZPUR_O01 terminated"
Please help me with this problem.

Hi Jay
U need to update these requests to ODS
REQU_43MODQ3GF69X17B71ZKQMN85I(20,154)
REQU_43MQ8A8F0L1US5COQTUUWX3BA(20,155)
REQU_43MQ8OQQTY21YQ37RMA1WMO06(20,156)
1) delete the current request
2)Reconstruct the requests above three request
3)and then Load the current reqest (REQU_43MNOPW29W4F5M037J7OAFP52)
Then only u will be able to activate the ODS....
This is an serialization issue...
hope it helps
regrds
AK
assign points if usefull

Update data targets from ODS

Hi Friends,
I have question regarding how to update data further from ODS.
I have ODS1 and ODS2.
ODS1 is having deltas updated from ODSA.
ODS2 is a new ODS and now needs to be updated from ODSA.
I have reviewed the help already.
http://help.sap.com/saphelp_nw04/helpdata/en/2c/749bbb595511d4b2bc0050da4c74dc/content.htm
I want to initially update the ODS2 with selection conditions from ODSA.
After that I want to load delta from ODSA to ODS2 by automating the process in process chain.
Please help me know, What is the optimum solution and what are the steps need to be executed.
Thanks,
John.

Anil,
I am just repeating the procedure to cinfirm that I understand it properly.
1. Go to scheduler, Initialization option make the status of the overall request red.
2. when it asks for update the QM status to all data targets, select no.
3.and then delete the init. request from Scheduler.
By doing this we just deleting the initialization selection and the request in the subsequent data targets are still green and they contain data.
After that Init. without data transfer will do the work.
Please confirm,
I really appreciate your input on this.
Thanks.

ODS activation error"Activation of data records from ODS object terminated"

Hi All,
While activating ODS request I am getting following error
"Activation of data records from ODS object KFI02O50 terminated ".
data load is suceesful for ODS but during activation of the request it is giving error.
I tried to change the status to green manually & then activated the request but still same problem.
Also I tried to delete request & loaded again from PSA & then activated the request but still same problem
If anybody has some solution please let me know.
Thanks in advance
Regards
Sonal

Hi Sonal,
Sometimes when there is erroeneous records that time while activating the Request request get fails.To check this go to manage tab of the ODS there under log u can see the log icon click on that and check y activation got failed..
Assign points if its helpful
Regards,
vid.

Error:Activation of data records from ODS object terminated

Hi All
i got error while loading the data "Activation of data records from ODS object terminated '
could you please tell me procedure how can i solve this issue?
regards
vasu.

- First check the Error Messages from the context menu of the activation step. Also check ST22 & SM21. This will tell you where the error is. Sometimes you might get duplicate records.
- Next use the "Manage" context menu for the ODS in RSA1. Check if any of the previous records are red. If its red, it would mean that either load/activation has failed for previous request which needs to be corrected first b4 you correct the current one.
- If al the above are OK, simply repeat the Activation step.
Hope this helps.
Regards
Anujit Ghosh

Update data targets from ODS object automatically

Hello experts,
I have an ods (that has two delta loading every night) with the setting: "Update data targets from ODS object automatically". This ODS is source of only one other ODS.
But we have a chain when there are the seguent steps: delta 1 --> ODS1,
delta 2 --> ODS1; Activate ODS1; delta --> ODS2; Activate ODS2.
The setting "Update data targets...automatically" could create some problems?
I think this because it is happened that in delta loading of ODS2, some records have only the key filled, and all the data fields blank; then, if I make a full repair of these records, all data are correctly filled.
Could be this the cause?
Help me..it is urgent..
Thanks,
Vito

Hi Vito,
To have better control of processes when ods gets data from multiple sources and supply it forward to ODS and cube ...we generally deactivate the flag "update data automatically".
And Process chains looks like ..
From source 1,2,3 update data into ODS 1.
Activate Data ODS1
Initiate delta from ODS1 to ODS2.
Activate data ODS2.
We did face some problem of blank records with only key filled and later deactivated the checbox "Update data into data targets automatically" and it resovled lots of issues.
Hope that helps.
Regards
Mr Kapadia
Assigning points is the way to say thanks in SDN.

Direct vs Indirect data load from ODS - InfoCube

We know that there are two options to load data from ODS to InfoCube:
1. Direct load:
If the ODS setting is checked with the option of "Update data targets from ODS object automatically", then when loading data to ODS, then the data also can be loaded to the InfoCube, in this way, only one InfoPackage is needed to load data to the ODS, then the InfoCube can be filled with data automatically.
2. Indirect load:
If the ODS setting is NOT checked with the option of "Update data targets from ODS object automatically", then not only the InfoPackage to load the data to the ODS is needed, but also the InfoPackage to load data from the exported datasource of the ODS to the InfoCube is needed to be created in order to load the data from ODS to the InfoCube.
I wonder what are the pro and con between the above two loading methods from ODS to InfoCube.
Welcome to every BW expert inputs!

HI Kevin,
Direct Loads or rather Automated Loads are usually used where u need to load data automatically into the final data target. And it has no dependencies.This process has less of maintenance involved and u need to execute a single infopackage to send data to the final data target.
But Indirect Loads are usually used when u have a number of dependencies and this ODs object is one of the object in a process chain. So if u require the this ODS data load wait till some other event has been executed , then indirect loads are used through process chains.
Regards,
JAsprit

Summing up key figure in Cube - data load from ODS

Hello Gurus,
I am doing a data load from ODS to cube.
The records in ODS are at line-item level, and all needs to be summed up at header level. There is only one key-figure. ODS has header and line-item fields.
I am loading only header field data ( and not the item-field data) from ODS to Cube.
I am expecting only-one record in cube ( for all the item-level records) with all the key-figures summed up. But couldn't see that.
Can anyone please explain how to achieve it.
I promise to reward points.
=====
Example to elaborate my point.
In ODS
Header-field item-field   quantity
123                301          10
123                302           20
123                303           30
Expected record in Cube
Header-field       Quantity
   123                    60
====================
Regards,
Pramod.

Hello Oscar and Paolo.
Thanks for the reply. I am using BW 7.0
Paolo suggested:
>>If you don't add item number to cube and put quantity as adition in update rules >>from ODS to cube it works.
I did that still I get 3 records in cube.
Oscar Suggested:
>>What kind of aggregate do you have for your key figure in update rules (update >>or no change)?
It is "summation". And it cannot be changed. (Or at least I do not know how to change it.)
There are other dimensions in the cube - which corresponds to the field(s) in ODS.
But, I just mentioned these two (i.e. header and item-level) for simplicity.
Can you please help?
Thank you.
Pramod.

Data loading from ODS to CUBE

Hi All,
I have loaded data from ODS to CUBE. now i have requirement to add some fields in the standard cube. so, for testing purpose i have created copy of the original and created transformation . now when i try to load data from ODS it shows me no more data available . while data is already there in ODS.
now what should i do ? i don't want to delete data from original cube. is there any other way to load data through transformation ?
Regards,
Komik Shah

Hi,
Check the DTP of old cube n see whether its Delta. If yes then check whether any one of the foll is check:
1) get delta only once
2) get data by request.
If 1 is checked then delta wont come for the second cube as it says to get delta once and delta is already in one of the cube.
Generally both should be unchecked but can vary as per requirements.
Now for your new DTP, i dont think it will aloow you to change to FULL.
If its allowing you to select FULL, then select it and select from acive table.
try to load and see.
regds,
Shashank

Updating the last date request from ODS to CUBE

Dear Friends,
Please can someone explain me.
i allways update request from ods to cube, sometime there will be 3 to 4 request in the ods which wont have the Data mart (Tick) and when i update it to the cube. i can only see 1 request which is current date request. i dont know whether the previous days request has been updated to the cube.???
but i see in the ODS that all the data mart (tick) is available for all the request.
And please can someone explain me, if i have many request in the ods, current date previous day and so on.
Is there any way to update in such a way, where i can see all the dates in the Cube instead of only 1 request with current date in the cube.
when i delete the request from the cube and remove the tick from the ods, and refresh, then suddenly the current request and all the previous request TICK will be gone...
Thanks for your help.
will assign complete points.
Thank you so so much

Hi,
if you know everday how many request are getting updated in infocube as one request the you can check the added records in infocube .. it should be equal to the sum of all those request ..
but transferred can be more or equal .. also its depends on the
update rules ..designing ..
Hope this helps you ..
Regards,
shikha

Debugging data load from ODS to InfoCube?

Hi Expert,
I got some errors when I load data from ODS to Cube. I tried to simulate the load, but I got No data in PSA table. I checked mt Infopakage, it is only update Datatarget directly. How can I debug in this situation. I have only that choice "Data Target only" How can I select update Cube through PSA? Thanks in advance!
Weidong

Hi robert,
Thanks for your reply! Do I have to delete the old one? It looks like that system generated two Infopackages - One is full update and another one is Initial update. I think that I have to delete both of them and re-created both, right? Thanks a lot!
Weidong

Data tranfer from ods to infocube

Hi Friends,
I have created ODS and infocube, the data was loaded on ods sucessfully , but when tried to transfer the data from ods to infocube, the error comes. the update rules and data flows are shown correctly as in FUFU book.
the errors comes as check the load and after that the infopackage ask to delete the init request in same cube.
can anyone suggest the right way of tranferring the data from ODS to INFOCUBE and the issues to check.
Kind Regards,
Irfankhan

Hi
Recheck whether you have the request Activate data in ods (odsrcactivate data & Activate Data automatically while ods creation & odsmanageRequest tab -- request -- Activate)
If the Data is there in Active Data table then try to update the same with Update Rules.
While Info Package from ods--Cube -- the Info Package Selection should be Delta ( Init is already there in your cube as I have seen the error message you mentioned)
the update From ods to Cube
Via Info Package -- Data Target Tab -- Schedule it with options Delta --
Info Package -- Monitor -- Update Manually (Wheel)
Adding it in Process chain
Hope it helps and clear

Init Data Upload from ODS to Info cube

Hi,
When i am trying to upload the date from ODS to info cube using initial upload option in info package, i am not able to see the selection option fields.
Whereas using the same ODS & info cube, if i am trying to change the option to full upload in info package, i am getting all the selection fields.
what could be the reason for the same.
please help
Rajiv

Somnath,
Let me explain u the complete scenario
1) we have an existing ODS which populates an info cube on daily basis (delta upload)
2) we have created a new info cube, which fetch the data from the same ODS. that means 2 info cubes which are getting populated from one ODS.
3) now when we have tried to initialize the new info cube from the existing ODS, it asked us to delete the initialize upload options "scheduler - initialize option for the system". & we have done the same. but by doing this, ODS has removed the option of delta upload from old info cube upload info package && new info cube initial upload is not dislaying any of selection fields..
4) now, i have a query
- how can i activate delta on old info cube (without losing any data)
- how to upload data in new info cube with selection fields and start delta
Regards
Rajiv

How to Restore Data Deleted from Time Capsule Hard Drive

This question is more about the time capsule in general as opposed to a specific time machine issue.
I'm using my time capsule as an external hard drive that I can access wirelessly and I have accidentally deleted a folder. It didn't go into the trash can on the computer I used to delete the file from my TC, it just disappeared. I have data recovery software (Data Rescue III) but it is unable to locate the TC since it is not a plugged in device. I've tried connecting my computer to the TC via wireless, ethernet, and usb but Data Rescue still won't detect the TC.
How can I get the files back? Is there a way to restore files deleted from the TC when it's being used as a hard drive (not as a time machine for backups)?
THANKS!!!
Message was edited by: jenniex
Message was edited by: jenniex

There is only one USB port on the back of the Time Capsule, and AFAICT from reading Apple's documentation, the only uses for that port are to connect an external hard drive or printer. You could try connecting that port to your Mac directly via USB cable, but nothing I can find indicates it would work, and you would be solely responsible if it somehow damaged either device (which may or may not even be a possible side effect).
Unfortunately, if connecting the Mac to the Time Capsule via USB does not work, you're probably out of luck. Unless you are willing to crack open the Time Capsule, remove the hard drive and put it in an external enclosure so you can access it with Data Rescue, your data will remain lost. Note for the future that you absolutely *should not ever* keep original, un-backed-up data on a backup drive. It's poor organization and dangerous to boot.

Data deletion from ODS

Similar Messages

Maybe you are looking for