Data deletion routine in the info package

Hi All,
I am writting an data deletion routine in the info package.
it is working fine...
but when we are transporting the info package, that routine is not getting transported.
we have tried sending ths info package through a transport connection.
but still it is not taking the routine to next system.
please let me know if any one has a solution for this.
Thanks,
Mugdha

Hi Mughda,
Collect the infopackage using transport connection, While collecting the infopackage make sure that Routines are also collected in the same request.
Else most of systems will have authorizations to create infopackages, so try to create one IP and use the routine in IP.
Hope this helps.
Rgs,
I.R.K

Similar Messages

How to identify the info package deleted by someone in process chain?

Hi all,
I can see a couple of info packages were deleted in the production system and it was removed from the process chain too!!
how to identify who has deleted the info package in the production system:?
Thanks

Can you is there any transport available with the Infopackage deletion activity?
in SE01 you can check in production system and check if your IPAK is stored in it or not..? IF yes then you can check the user.
Also you can track is there any deletion transport has come from D to P or Q to P? Can you check whether the IPAK is available in D and Q?
Also you can check the process chain recent modified by in RSPC and check if there is any user details were captured?
OR you can also look at in transaction SLG1. Check for the logs..
Hope this helps,
Murali

Dump error while creating or double click the info package

Hello experts,
I have actived infocube 0FIAR_C03 in BI content. Ago, The creation infopackage have been deleted in the past , today, I created a infopackage, while I update mode selected u2018initialize delta processu2019, then click save button , the system prompt u2018Deltas already loaded for request REQU_D64R47LDUSZHY9CBIB86WMLFJ init.selection; no 2. initu2019, I canoti save it for my setting. Why is this?
Then I have search cause in SDN, and I have reference OSS Note 852443 to do .
Note 852443 have mention some table: RSSELDONE、RSSDLINIT、RSSDLINITSEL、ROOSPRMSC、ROOSPRMSF.
I have to delete that request of record using se16 in these tables: RSSELDONE、RSSDLINIT、RSSDLINITSEL.
in my BI 7.0 system, ROOSPRMSC、ROOSPRMSF is no any data.
I was no found delta queue in RSA7.
Now . Dump error while creating or double click the info package, how can I change this?
Please let me know the solution.
Thanks for your help.
Best Regards
Steve

Here are some links which deals with same issue.
Re: Dump In Infopackage
Re: Getting into Short dump at the time of selecting InfoPackage to execute for
Short dump while performing init in infopackage
Re: Infopackage going into short dump
Thanks.

Dump Error while Creating the Info Package

Hi,
I have created Customized ODS and used Generic data sources.I have loaded full Upload to ODS. Created Info Packages for Init delta and Delta for delta loading. I have ran Full Upload and while I am trying to run Init, I am getting the error.
While I am trying to open the Info Package, I am getting Dump error message.
Dump error Message :
What happened?
    The current application program detected a situation which really
    should not occur. Therefore, a termination with a short dump was
    triggered on purpose by the key word MESSAGE (type X).
While i am trying to Create New Info Package, the systems gives the Dump on the System
Please help on this issue.
Thanks,
Siva.

Hi,
Actually, when we want to have delta loads in future, then we can just have one infopackage with init delta infopackage, so that when it runs for the first time, it pulls all the records and from next time onwards it will pull the delta records only.
But as you have done the full load with infopackage, now just create a delta infopackage, no need of init delta infopackage, this is the reason, its giving dump.
Hope it has given some insight.

)How can we schedule the info package daily run at 6 AM, with out useing in

Hi
   Can any one explain 1) what is information broadcasting &how can we use this.
2)What are the settings we have to do when we use the charts in WAD's
3)How can we schedule the info package daily run at 6 AM, with out useing in process chains
Thanks
Bharath

Hi,
Information broadcaster :
      you can precalculate and distribute(thru mail) the query, workbook and webtemplate through online link or html file to the receipents (users).
have a look at the below link.
     http://help.sap.com/saphelp_nw04/helpdata/en/3a/0e044017355c0ce10000000a1550b0/frameset.htm
Infopackage scheduling:
     you can schedule the infopackage daily at your desired time .In the schedule tab ,select the start later in background and in the scheduling option give the date and time and give the period values as daily.
Regards,
Siva.

Error while monitoring the Info Package

Hi,
While monitoring the info package, I'm having the following errors:(The data source is of type standard R3 Datasource).
" Error when updating Idocs in Source System
Diagnosis
Errors have been reported in Source System during IDoc update:
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Source System . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get. "
pls help me in this...
With regards,
Yokesh.

Hi Yokesh,
Try these to solve your issue,
tRFC Error - status running Yellow for long time (Transact RFC will be enabled in Status tab in RSMO).
Step 1: Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
queue thats under outbound processing and click on display the IDOC which is on the menu bar.
Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
(Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
to the particular TRFC request for that Idoc.
OR
Go into the JOB Overview of the Load there you should be able to find the Data Package ID.
(For this in RSMO Screen> Environment> there is a option for Job overview.)
This Data Package TID is Transaction ID in SM58.
OR
SM58 > Give * / user name or background (Aleremote) user name and execute.It will show you all the pending TRFC with
Transaction ID.
In the Status Text column you can see two status
Transation Recorded and Transaction Executing
Don't disturb, if the status is second one Transaction Executing. If the status is first one (Transation Recorded) manually
execute the "Execute LUWs"
OR
Directly go to SM58 > Give * / user name or background (Aleremote) user name and execute. It will show TRFCs to be executed
for that user. Find the particular TRFC (SM37 > Req name > TID from data packet with sysfail).select the TrasnID (SM58) --->
EDIT ---> Execute LUW
OR
In RSMO, select the particular load you want to monitor.
In the menu bar, Environment >>> Transact. RFC >>> Select whichever is required, BW or Source System.
In the next screen you can select the Execute button and the IDOCS will be displayed.
Hope it helps
Regards,
Arun.M.D

How to Schedule the info package groups?

Hi,
To scheudle the info package group is it enough to shcedule at infopackage group level or do I need to schedule each info pcakages?

Hi ,
You can execute at Group level.
Plz find teh steps for creation and sheduling of IP Group,
1. GO to Adminsitrator workbench RSA1 > Infosources
2. Create your infopackage do not select option but select data load
immediately get out of infopackage prior to going to step 3
3. Click on icon show infopackage groups
(icons are update tree, monitor, display node log, search in subtree,
legend, and show infopackage groups)
4. This will create another window. Now you can create your infopackage
groups. Right Click on folder (infopackage group)
enter long description name, go back to your infopackage and pull it
to the infopackage group
(it's a drag and drop to long description name you just created and
remember it will be on the bottom of the list most likely)
5. Click on infopackage group and its time to select which on to run
first and time your going to schedule it.
INFOPACKAGE
a. Execute package should have a check mark without it itwon't run.
b. Start Sequence (depends on which one you want to run
first for my example its) 1
c. Selection exists (is created when you pull youinfopackage to group)
d. Maintain infopackage is a pencil and will take you therefrom hereInfopackage is your name from the infopackage you pulledover
e. Data type (is created when you pull your infopackage togroup)
Check whether contents was updated without errors beforeyou start next request
(I highly recommend you check this because if will stopyour process if a infopackage fails)
f. Delay until the start of the next request (not necessaryto check)
g. Technical name
Schedule
Selection Options: Immediate (now)Date time (preselected time) if youcheck period and period valueshere it can be run eachday or specific dayAfter job
After event At operation mode
Regards
Marasa.

I have made a burn folder with photos exported from I-photo. It now shows in information, that the date is created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?

I have made a burn folder with photos exported from I-photo. It now shows in information, that the date created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?

The Finder reports File information. The date and time of the photo are in the Photo's Exif metadata. The Finder has no awareness of this. All photos apps on any system do.
Regards
TD

Error while openign the info Package

Hi , i am getting the following short dump error while trying to open the info package. these are the Ipaks which were in use before but now getting short dump after R/3 upgrade.
Can you please help me
"MESSAGE_TYPE_X" C
"SAPLRSS1" or "LRSS1F11"
"RSM1_CHECK_FOR_DELTAUPD"
Thanks.

Hi Chris,
Please check OSS note: 852443 - Dump in include LRSSMU36/RSSM_OLTPSOURCE_SELECTIONS
There are also a couple of threads here talking about the same problem.
Hope this helps...

0HR_PT_3 Load is taking too much time when i execute the Info package

Dear All,
i am working on HR Module.
i am extracting data from 0HR_PT_3 from R/3 PRD system through info package its taking long time to load data.
I have checked in RSA3 in R/3 PRD system whenever i extract "0HR_PT_3" instead of showing records its showing this error message "Infotype 2002 not read due to lack of authorization" .
could you please let me know any one have resolve this issue.
Thanks,
Venkat.
Edited by: venkatnaresh7 on Jul 12, 2011 11:49 AM

hi
I am facing same issue. did you able to fix this?

Reg: Mode of the info package

Hi Experts,
As we can run an info pakage in different modes like 'INIT', 'FULL' & 'DELTA' - this mode will be given as input in i_updmode for the extractor function module. But we are unable to get that value. whenever we run, the i_updmode is coming will null value.
is there any other way to get the mode in R/3 FM, when an info package is executed.
Will it store in any DB table?
I need to get this mode value in function module, bcoz based on that i need to implement the delta concept.
Plz help me.
Thanks in advance.

Hi Madhu,
This is the forum to discuss questions and feedback for Microsoft Office client. There is not so much about Office 365 license aspect here, I would suggest you to post in the forum of
Office 365 Community, where you can get more experienced responses:
http://community.office365.com/en-us/f/default.aspx
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to eliminate "deleted" images from the .key package?

I've noticed that sometimes, when I delete an image (or movie) from a keynote file, it disappears from the slide show... but the actual image (or movie) file remains in the keynote package. If those images (or movies) are large, it creates enormous unnecessary swelling of the keynote file size.
I've tried deleting these files from the .key package, but that seems to confuse Keynote, and the presentation won't run.
Is there a way to clean up a .key package and get rid of those unneeded files?

No, it's not plain english and it's fairly hard to figure out, but once you do, you can find what you need fairly quickly. Modifying it successfully can be a bit of a chore, too, as it's mainly trial and error. Knowing the name of your file helps as you can do a search to find it, but how to properly get rid of it without Keynote having problems may be a little more daunting. Make sure you practice on a "copy" of the file.
There's supposed to be a new version coming, but no one knows if it's going to be sooner or later.

Running the info package twice in bw 3.5?

Hi all,
There is a process chain existing to load
ods 1 to ods 2 for a particular region on a different time sone
I need to load the same ods 1 to ods 2 for another region in a indian time zone.
When i look at the new procees chain i am getting
infopackage -> ods activation -> further processing -> infopackage -> ods activation - fruther processing!!.
But the existing process chain looks like
infopackage -> ods activation -> info package -> ods activation!!
which has to be the same for the new process chain too.
When i run the new process chain
infopackage -> ods activation -> further processing -> infopackage -> ods activation - fruther processing!!.
It is causing the issues it doesn gets executed after further processing!!
Thanks
Pooja

Hi Pooja
I think there is still some build problem.
In you existing process , infopackage -> ods activation -> further processing -> infopackage -> ods activation - fruther processing!!,
Just remove 3rd and 6th step. After removing these 2, you have to link as below:
start -
> infopackage 1-> ods activation for ods1 -> infopackage2 -> ods activation2 . Please also check the variants for each existing process to make sure you have added correct IP and ODS for all the processes.
Cheers
Chanda

How to find the info packages which have periodic data selections?

Hi,
is there any way we can find the list of infopackages that have data selection enabled only on time? ( say calendar day )
if not, is there anyway to find the list of infopackages which has data selection?
Thanks,
Ravi

Hi Ravi,
what do you mean exactly?
if you are in SE16 or SE11 in the selection screen, you can enable these fields for the selection via menu Setting / fields for selection; then mark FIELDNAME and IOBJNM.
then enter OBJVERS = 'A'
and e.g. IOBJNM = 0CALDAY
or double click in the input box of IOBJNM and select "not equal to" and leave the input box empty in order to see all IPack with a selection on any IObj.
hope this helps otherwise pls let me know
Olivier.

Please help! I have an I-Pad and a mini I-Pad. Both contain the same information. If I delete from one the info or e-mail is automatically deleted from the other. How can these two I-Pads be made separate entities so I can erase everythiing on only 1

I Hope someone can help me! I have an I-Pad and a mini I- Pad.
Both have identical content, e-mail , etc. How can I or what can be done to make them 2 separate I -Pads so that I can erase the content from one but not the other.
As it is now , if I. delete anything from one,the same is deleted from the other. What action can be performed to make them separate entities.
thank you for your help in this matter

Hi If you want to you can put one ipad back to factory settings Before you do this in settings turn off find my iPhone Then you can set ipad up as new. But if you use the same Apple ID you will get the sameApps & data back on again. Cheers Brian

Data deletion routine in the info package

Similar Messages

Maybe you are looking for