Data Differs From SOST and the Received Mail

hi experts,
I send a program as an HTML alert . But the problem is that sometimes the alert is not received Completely . Some columns are truncated or some rows are omitted where as if i check in SOST it is appearing Correctly , but when the mail is received , it is having the problem. Could some on help me on this please?.
with thanks in advance,
Syed Ibrahim G

Hi,
you say sometimes it's truncated.
What means sometimes ?
Is it depending on the receiver of the data or the program name or what else?
Regards,
Klaus

Similar Messages

When deleting a user created folder from On My Mac in Mac Mail the sent messages that are part of conversations that reside there are not deleted, only the received mail gets deleted.

When deleting a user created folder from On My Mac in Mac Mail the sent messages that are part of conversations that reside there are not deleted, only the received mail gets deleted. Any way for both the received and sent mail that resides there to be deleted?
I create a lot of project folders where i keep all my conversations regarding the project. Once the project is finished i would like to just delete the folder and get rid of all the emails associated with it but when i delete the folder i've noticed that only received messages are deleted. Now I am stuck trying to sort through my sent folder for messages that were returned there after the conversations was supposedly deleted.

Mail/Preferences/Viewing - un-check include related messages, delete the folder, then go back and reset yo include.

HT1430 my ipad has gone dead. I tried holding the sleep/wake button down until the red slider appears but it never does. By the way this a refurbished unit I purchased from Apple and just received it yesterday.

My ipad has gone dead. I tried holding the sleep/wake button down until the red slider appears but it never does. By the way this a refurbished unit I purchased from Apple and just received it yesterday

Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings will be reset.

Two PDF's - 1 created from Illustrator and the other Acrobat. Same colour is different in both. Why?

Two PDF's - 1 created from Illustrator and the other Acrobat. Same colour is presented differently in both pdf documents. Why?

Hi - sorry pressed send too quickly....
I have two PDF documents that show a sample business card in PDF.
One was apparently created through illustrator and is the focument for the printers ... it is this document that shows a completely different colour to the one that is in the other PDF that was apparently created in Acrobat. Though designers assure me that they are exactly the same patenone and that it's the software interpretting it.
What i dont understand is why the colours would look different using the software from the same company....and why designers would put up with this as a basic layman it just looks plain wrong to me.

Imported ical from outlook and the date across the top of the weekly view all show the date i imported..

imported ical from outlook and the date across the top of the weekly view all show the date i imported..

I'm confused, what does iCal have to do with this, it seems as though you went from Outlook to Entourage, is that correct?

HT201210 I try to restore my iPad from iTunes and I receive the error 3014.

I try to restore my iPad from iTunes and I receive the error 3014. Any idea how to resolve this issue ?
I am running Windows 7.

iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom
Error 3014 may indicate that you need to free up more disk space on the computer before trying to restore again.
Message was edited by: Texas Mac Man

I purchased a book from ibooks and the book had content from a different book

I purchased a book from ibooks and the book had content from a different book
Purchased: "Mourhino Further Anatomy of a Winner" by Patrick Barclay
Got: "Soul Beach" by Kate Harrison

Go here:
https://expresslane.apple.com/Issues.action
Ask for assistance

Where does the data come from which powers the ship date and delivery date

Hi All,
Please let me know, where does the data come from which powers the ship date and delivery date?.
Adi.

Hi,
DELIVERY DATE will be maintain in the SALES DOCUMENT TYPES in VOV8 in the tab REQUESTED DELIVERY DATE/PRICING DAE/PURCHASE ORDER DATE.
The field is PROPOSE DELIVERY DATE .
If you check the field then the document created date will be the Requested date and will be carried from ORDER TO DELIVERY.
If you want the delivery date other thann the CURRENT date then you have to maintain the LEAD TIME in days in the same tab.
SHIP DATE: is the date on which you do the PGI in the delivery .
Please check them and revert back if u need further details
thanks,
santosh

HT1918 First time trying to buy from iTunes and I received a message that my payment was declined. I was using the MasterCard method. Help

First time trying to buy from iTunes and I received a message that my payment was declined. I was using the MasterCard method. Help

Is this a debit card you're trying to use? If so, those are apparently no longer accepted by the iTunes Store. You need to use a true credit card. If you are using a credit card, make sure all your billing details match your bank statement exactly. If that doesn't help, call your credit card company and ask if they can see any sort of flag on your account that might cause your card to be declined.
Regards.

I brought a new ipad mini with retina. The color saturation is too low to me, especially the purple. My wife started to complain because the color is really different from iphone and ipad. Can user adjust that?

I brought a new ipad mini with retina. The color saturation is too low to me, especially the purple. My wife started to complain because the color is really different from inphone and ipad. Can user adjust that?

Other than a couple of minor adjustments, such as the one that Diavonex suggested above, there is nothing that a user can do in settings to adjust color. There is no way to calibrate the color like you can do with a computer monitor.

Link between Delivery schedule line counter from PO and the material docume

Dear Gurus,
I have one PO with single line item having delivery schedule -
Material 1 -
delivery schedule 01.01.2009     2000
                                                     01.03.2009    5000
I have received quantity against this Po
I want to know where I can find the link between Delivery schedule line counter from PO and the material document
Best regards
Sar

There is no link from the MAterial document line item (Table Mseg) to the PO Schedule Line (EKET).
If this is for Evaluating an on time delivery or GR, you may consider the following approach.
PO details Po Date QTY
Sch1   01Jun2009   200
SCH2 08Jun2009   100
GR Details
GR1   01Jun2009   180
GR2   07Jun2009   110
GR3 09Jun2009      10
Calculate a *** total qty for the PO Line.
PO details Po Date CUMUL QTY
Sch1   01Jun2009   200
SCH2 08Jun2009   300
Calculate a *** total qty for the ontime GR.
PO details Po Date CUMUL PO QTY CUMUL GR on time
Sch1   01Jun2009   200                180
SCH2 08Jun2009   300                 290 (180+110) the 3rd GR was too late
Evaluate the PO SChedule Lines as follows:
Po SCL qty + CUMUL GR QTY - CUMUL PO QTY = ADJ GR ON Time Qty
SCH1 01Jun2009
200 + 180 - 200 = 180 on time for 01Jun2009 date ( 90% fill rate)
SCH2 08Jun2009
100 + 290 - 300 = 90 on time for 08Jun2009 date (90 % fill rate) the first 20 of the GR on 07Jun2009 went to fill the late, early date.
Best of luck !
SCH2 100 +290 - 300 = 90 on time for 07Jun2009 date

Date conversion from Excel to the SAP format

Hi,
I have created a BDC program which uploads daat from Excel sheet.
There is a date field also, the format of which can be any as per the end user (it will be one of those allowed by SAP).
However, the file will be used for execution by another user who may have a date setting which is different than that from the one in Excel.
Eg. End User's date format: DD.MM.YYYY, SAP User's date format: MM/DD/YYYY
So, how do I convert the date format from excel to the format which will be accepted by the transaction during the recording?
Regards,
Dave

Hi Dave,
I have faced the same issue while uploading the date to the bdc.
if ur date format is DD.MM.YYYY in the excel file, first of all you need to change this to dats format ie YYYYMMDD ie character8 format and pass to the bdc, it will automatically convert to sap format
ie you need to convert splitting at .
data lv_date type char10,
        lv_dd type char02,
        lv_mm type char02,
       lv_yyyy type char04,
v_date type char08.
lv_date = '30.12.2011'.
split lv_date at '.' into lv_dd lv_mm lv_yyyy.
if strlen(lv_dd) lt 2.
   concatenate '0' lv_dd into lv_dd.
endif.
if strlen(lv_mm) lt 2.
   concatenate '0' lv_mm into lv_mm.
endif.
concatenate lv_yyyy lv_mm lv_dd into v_date.
"Please use the variable V_DATE to populate to ur bdc"
Edited by: Rahul Babukuttan on Aug 11, 2011 5:35 PM

How can i send PGP encrypted file from PI to the receiver

Hi experts,
I am unable to send the PGP encrypted file from PI to the receiver. where the Clients sends the file using PGP encryption,
But i am trying to send the same with PI. But i am not able to send the same can you please help me out to get the same incorporated using PI 7.1
and sends to the receiver ( the rceiver would be FTP ).
Regards,
Amruth

hi,
You can write an adapter module to encypt your payload before sending to Reciever:
/people/dijesh.tanna/blog/2008/09/15/sap-pi-integrating-macafee-e-business-server-with-sap-pi-70-for-pgp-encryptiondecryption
http://www.bouncycastle.org/documentation.html
http://www.cryptix.org/
http://aedaptive.com/index.php/solutions/pgp-for-sap-netweaver
http://www.pgpi.org/doc/pgpintro/
PGP encryption: Do we need to write adapter module?
If you are getting PGP file from sender and want to send this file to target without any mapping transformation you can use this blog:
/people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository
Thanks.

How bapi different from session and call transaction?

how bapi different from session and call transaction?
thanks in advance.

For one, Batch Data Communication (BDC) is older. Business Application Programming Interface (BAPI) came later, about 10 years ago (you can see this already from the name, which contains marketese like "business" ).
More important though, they are different technologies. With BDC you build the "batch input transaction" yourself, with an ABAP program which creates the "batch input session" ("Batch-Input-Mappe" in german). You then take that session, like an object, and "run" it on a system (most of the time, this is done on a local system by the administrators, after it has been tested for correctness).
With BAPI, a system (local or remote) exposes its interface to you through some kind of Remote Function Call (RFC). Practically, it tells you: "What do you want to do? Insert that data into Materials Management? Here is the function and the the parameters you have to use for each record". You only work with the Interface - the exposed function. How this function works does not have to interest you. You don't have sessions to "run", you fire your function calls filled with data, one after another and you're done.
BAPI can be run remotely. With BDC, you probably have to call the administrators of the remote system and send them the session you created for them to run. With BDC you go through the whole transaction in one BDC session, with BAPI you may need more than one "BAPI calls" to do this.
With BAPI you don't fill obcure field names with values, you just fill the parameters. You can use a BAPI from inside your ABAP program to let a "business object" do some clearly defined work for you, then you can continue with your code doing other things. You don't do this with BDC. With BDC you write a dedicated program that creates the "session", which is then executed separately.
Batch Data Communication (BDC) is the oldest batch interfacing technique that SAP provided since the early versions of R/3. BDC is not a
typical integration tool, in the sense that, it can be only be used for uploading data into R/3 and so it is not bi-directional.
BDC works on the principle of simulating user input for transactional screen, via an ABAP program. Typically the input comes in the form of a flat file. The ABAP program reads this file and formats the input data screen by screen into an internal table (BDCDATA). The transaction is then started using this internal table as the input and executed in the background.
In Call Transaction, the transactions are triggered at the time of processing itself and so the ABAP program must do the error handling.
It can also be used for real-time interfaces and custom error handling & logging features. Whereas in Batch Input Sessions, the ABAP
program creates a session with all the transactional data, and this session can be viewed, scheduled and processed (using Transaction SM35) at a later time. The latter technique has a built-in error processing mechanism too.
Batch Input (BI) programs still use the classical BDC approach but doesnt require an ABAP program to be written to format the
BDCDATA. The user has to format the data using predefined structures and store it in a flat file. The BI program then reads this and
invokes the transaction mentioned in the header record of the file.
Direct Input (DI) programs work exactly similar to BI programs. But the only difference is, instead of processing screens they validate
fields and directly load the data into tables using standard function modules. For this reason, DI programs are much faster (RMDATIND - Material Master DI program works at least 5 times faster) than the BDC counterpart and so ideally suited for loading large volume data. DI programs are
not available for all application areas.
Business Add-In (BADI) are a new SAP enhancement technique based on ABAP Objects.
They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.
As with customer exits two different views are available:
In the definition view, an application programmer predefines exit points in a source that allow specific industry sectors, partners, and customers to attach additional software to standard SAP source code without having to modify the original object.
In the implementation view, the users of Business Add-Ins can customize the logic they need or use a standard logic if one is available.
In contrast to customer exits, Business Add-Ins no longer assume a two-level infrastructure (SAP and customer solutions), but instead allow for a multi-level system landscape (SAP, partner, and customer solutions, as well as country versions, industry solutions, and the like). Definitions and implementations of Business Add-Ins can be created at each level within such a system infrastructure.

I have i phone 4 from verizon and the power button is not working

I have i phone 4 from verizon and the power button isn't working anymore, I bought my i phone 8 months ago.
What options do I have and what should I do ?

Hello James,
The flashing WLAN light means activity (data getting transferred). Try disconnecting all your devices and check whether the light is still flashing or disconnect the router from internet and do the check.
Do you have your SSID as linksys or the default one? If your neighbor has the same SSID, then traffic could result from your neighbor's one. Try changing your SSID and password. Make your security WPA/WPA2.
Hope this helps,
Thanks
Vijay

Data Differs From SOST and the Received Mail

Similar Messages

Maybe you are looking for