Data disappearing after updating software

ever since i updated my nokia n8 to belle its been eating on my data. now i hev to disconnect mobile data when i am browsing. any advice guys???

Kinda.
Read the following in its entirty before doing anything.
Note that a "Restore" could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

Similar Messages

Covers of buyed music disappears after update software

A lot of covers of my buyed songs disappears after I updated iphone software to iSO 8 and I can recover it.
Can anybody help me?

I've had the same problem and i posted about it a few hours ago. What i did was just restore my iPhone which was pretty a pain in the ***. if that doesn't work, then try deleting purchases from your iPhone and download it again through you iPhone on the purchased section of iTunes.

How do i get my favorites back after updating software on IPad?

How do I get my favorites back after updating software on Ipad? It asked to back up and restore which I did but now I cant find the favorites. Any suggestions.

Hi,
Do you mean the Messages icon has disappeared from your DOCK on your Mac ?
Or do you mean that Messages does not appear in your Applications folder either ?
Or do you mean that in Messages Menu > Preference > Accounts the iMessages account is not Logged in ?
9:59 pm Thursday; October 24, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Unable to restore 4s after updating software

unable to restore 4s after updating software , the wake up screen is nonresponsive

Hi D.Cohen
Thanks 4 ur attention , I did exactly what u told several times , the restoring ( updating ) starting , after some times , there is a message appears to ask for allowing pc to access iphone data , followed by another one telling to give answer via iphone ( which is still unresponsive ).
After downloading completed , I got another message , telling that there is an error occurred and asking to try again . ( each trial take around 1-2 hours )
pls advise
0

Why isn't my Ipod nano 6th generation being recognized on itunes after updating software to 1.2

Why isn't my Ipod nano 6th generation being recognized on itunes after updating software to 1.2?

I found that all the movies that I want on my nano have iTunes extras.

HT4101 After updating software on the iPad to latest iOS version the iPad no longer supports the USb on my camera conector kit

After updating software on iPad it no longer recognises my USB on camera adapter kit

What happen if you ignore error message and connect your camera to it?

After updating software on my Apple TV it is asking to connect to iTunes. Can't understand why?

After updating software on my Apple TV it is asking to connect to iTunes. Can't understand why?

You can try borrowing one. These cables are common for Android, Kindle etc. users.
Here are some steps and notes to try:
MANY people are reporting they've had to try multiple micro USB cables to find one that works. I got one that worked from a neighbor.
For clarification, this needs to be a "micro" USB, not a "mini" USB
Some people have also reported they've had to try the Restore process more than once.
1. Unplug Apple TV and move it to your computer running latest version of iTunes.
2. Quit iTunes if running.
3. Plug micro USB cable to the back of the Apple TV.
4. Power the Apple TV using the AC cable.
5. iTunes shoud either launch itself (a good indication that the micro USB cable you're using is compatible), or launch iTunes.
6. Click Restore. Software will download and install (big file).

Repairing permissions before and after updating software

What is the reason to repair permissions before and after updating software? This may sound like a stupid question to many of you, but I am new to computers and I am trying to learn how and why of some of the things of my PowerBook. I installed some updates without repairing permissions. Did I install some software updates the wrong way? Thank you.

This is a topic which will draw as many emphatic for and against responses as overnight shut down or not, defrag or not, optimise or not, and so on.
I agree with Neil. I believe that OS X has progressed sufficiently that repair permissions has become redundant and so I do not do it on any regular basis.
Some folk may refer you to an Apple Support Article 303602. That Article in its 4 May 2006 version, titled "Top 10 Tips to Keep Your Mac in Top Form" suggested Repair Permissions should be done "after upgrading or installing new software". The Article was however revised on 15 May 2006 to be titled "Top Tips to Keep Your Mac in Top Form" and the item on Repair Permissions [along with two other recommended maintenance tips] was removed. It is my view that the conclusion to be drawn here is that Apple no longer considers Repair Permissions to be a required maintenance procedure.
Many users have adopted a "Repair Permissions" mantra for a cure-all over several years. I dropped it sometime in 10.3.
But, to each his own.
HTH
TiPB 867 Mac OS X (10.4.6)

Hi, may i know how can i get all data back after update ios 6

Hi,
May i know how can i get all data back after update ios 6 and all my data lost ?

You can restore the phone and when prompted to restore choose from icloud account. BUT MAKE SURE there is 1.) an icloud backup for your phone. 2.) you are using the same apple id.
apl

TS3276 After updating software yesterday, noticed that sent emails are not showing up in Sent Folder for one of my accounts.

After updating software yesterday, noticed that sent emails are not showing up in Sent Folder?

Are you storing Drafts, Sent, Trash and Junk messages on the server via your .Mac account with Mail?
If so, do you access your .Mac account with an email client on another computer or regularly access your account via webmail on another computer?
If not, any other reason you need to store Drafts and Sent messages on the server?
While composing a message with Mail, it is temporarily saved in the account's Drafts mailbox so sounds like something went wrong with the process between finishing and sending the message with Drafts and Sent being stored on the server.
If you don't have any need for this, better to store Drafts and Sent messages locally on the hard drive with Mail.

.AI Icons disappeared after update to 10.6.6

Hi,
My .AI preview Icons disappeared after update to 10.6.6, they do show in Quicklook, but not in the folders. They are now just show the standard AI icons.
My other Imac's dont have this problem.
Thanks
Sarah

Here comes the/my solution:
Remove Sophos Antivirus
Thanks to boojum's remarks in https://discussions.apple.com/message/15480849#15480849 !
Don't forget to use Sophos' deinstall package: /Macintosh HD/Library/Sophos Anti-Virus/Remove Sophos Anti-Virus.pkg
Nevertheless, some settings have been re-initialized (no complete list!):
- Dock
- Language has been reset to English only
- Expose & Spaces
(- probably all personal settings?)

Has anyone else had a problem with data? after updating my phone to the new update, i have all this data, and keep getting notifications that my data is getting high. i never had this problem before.

has anyone else had a problem with data? after updating my phone to the new update, i have all this data, and keep getting notifications that my data is getting high. i never had this problem before.

fair enough. No need for any unnecessary posts either. You issue had been addressed ad nauseum already in this forum had you bothered to search this forum (as forum etiquette would dictate) before posting.
In any case, I hope that your problem was solved.

Slow after updated software

After updating software, Maverick 10.9.4, on my Mac, it is very slow especially opening apps. Any recommendations?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer.

After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer. The rainbow wheel was runnig 8 hrs and I turn off mac mini by power button, then I turn on mac mini with key Shift and p/w, checked HD. My HD has
capacity 499.25 GB used 86.91GB. Is there a solution to fix this problem axcept the reinstall os?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in safe mode.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
for k in /Sy*/L*/Ex*/{,.?}*.kext; do test -f "$k/Contents/Info.plist" && /usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$_" | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo $k; done | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
sudo defaults read com.apple.loginwindow LoginHook | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
Repeat with this line:
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 4
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null | open -f -a TextEdit
Remember, Steps 1-4 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

The playlists I created have disappeared after updating to iOS 7.1. I have not backed up this phone to a computer - only backing up with iCloud. Is there a way to recover my playlists?

The playlists I created have disappeared after updating to iOS 7.1. I have not backed up this phone to a computer - only backing up with iCloud. Is there a way to recover my playlists?

Dictation in text message = Does not work
Speaking with Siri via activated with Home button = Does not work
Speaking with Siri with "Raise to Speak' = WORKS
Voice Memos = WORKS
Speaker phone on call = WORKS
Voice control instead of Siri = WORKS
I've tried hard reset, settings reset, wiping and reloading backup...nothing. Was hoping 7.1 might offer some respite, but no dice....
I was hoping 7.1 would somehow solve it.

Data disappearing after updating software

Similar Messages

Maybe you are looking for