Data display in P Book

I have Monthly Bkts in My Pl Book. When my history is loaded into my PA, how the data for the dates 1- 5 Jan 08 is displayed ? Will it show under Dec 07 bkt or Jan 08 bkt in pl book ? as 31st Dec 07 is monday. So the whole week data will fall under Dec bkt ?
Any idea pls ?
thx
venkat

Venkat,
Assuming I am getting this issue correctly here is my analysis :
1). The system determines the number of workdays in each technical period to display the data.
2). In your case when you see the data in monthly buckets the system first determines the workdays for January(as per your example) in each week and divides the data in those workdays.
assuming there is no calendar assigned the system will divide the figure in week (Dec31 - Jan6) equally per day. The reason that you are not seeing exactly equal but slightly deviating values is because of the rounding that system does.
Please refer to the following link to understand this better.
http://help.sap.com/saphelp_scm50/helpdata/en/26/53f1f3758211d398490000e8a49608/frameset.htm
Hope this helps!
regards,
Abhishek

Similar Messages

If possible can i show todays date on my mac book pro screen?

if possible can i display todays date on my mac book pro's screen

I use my Date&Time in the MenuBar to show day-of-the-week and time with AM/PM, and flashing time separator as a check against system hangs.
If the Calendar application is showing in the Dock, it will display the number of today's date in its Icon. As far as I can tell, you do not need to have EVER run Calendar to have it automatically update its Icon from the default 17 to the current day-number.

Duke's bookstore2 displays only one book title

When I run Duke's bookstore2 from the Tutorial (Chapter 12: JavaServer Pages Technology: The Example JSP Pages), I'm not getting any error messages, but instead of seeing the graphical "Duke's Bookstore" heading followed by a horizontal line and "Please choose from our selections:" the only display I'm actually seeing at http://localhost:1024/bookstore2/bookstore is this single link:
"Web Components for Web Developers,"
and when I View Source for the page, I see only this:
<fmt:message key="What"/>
[actually 5 lines of space here]

<c:url var="url" value="/bookdetails" />
<blockquote>Web Components for Web Developers,
<c:url var="url" value="/bookcatalog" />
<fmt:message key="Talk"/></blockquote>
<fmt:message key="Start"/>
It seems to be displaying only the contents of one data set, rather than the data for all the books as part of a complete HTML page. (But when I open the pointbase console and "select * from books;" I see details for all 7 books in the table. So the full table is populated in the database.)
When I click on that single link, I go to this URL:
http://dar2000:1024/bookstore2/bookstore?bookId=203
where I still see only one line with that one book title and nothing else on the page.
Any suggestions? Thanks!

Actually, I did add the prelude and coda pages in the JSP Properties tab.
But, when I entered "/*.jsp" under URL Patterns on that same JSP Properties page, I did not erase first the "/URL_properties" that appeared there by default, so I ended up with "/URL_properties/*.jsp" in that field.
When I reduced that to "/*.jsp" the complete page displayed, including the bookstore header, clock applet, Start Shopping link, copyright info, etc.
Stephanie, thanks!

Purchase requisition date in SNP planning book and product view not in sync

Hello Experts,
We have an issue with display of purchase requisition date in SNP planning book.
We are manually entering the PR's for a perticular week from Monday - Sunday(01.09.2014- 07.09.2014), when the last PR is entered on 07.09.2014, it does not appear on the same day in planning book(cell becomes empty) and moves to 06.09.2014, thus quantity on 06.09.2014 is the summation of the quantities present on 06th and 07th.
The PR dates are appearing correct when we click on display details in planning book and they are correct in product view, MD04 as well.
Additionally, this is the same date on which daylight saving time comes into effect.
Kindly advise if anyone has faced similar situation earlier.
Many thanks,
Aditi

Hi Aditi,
Check the time zone that you have in your location in ECC and APO.
Also note it is recommended that you maintain the same system time zone in APO and in ECC. (check tcode STZAC in both systems).
Different time zones should generate this kind of inconsistencies.
Kind Regards,
Mariano

My phone will not display my address book !

My Blackberry 8900 will not display my address book. The addresses are there and on the sim card, but I can not get them to be displayed on the phone. I have tried copying them but does not seem to work. What do I do. Thanks in advance for all your help.
Solved!
Go to Solution.

Are the contacts in your BlackBerry Address Book AND on your SIM card?
Or ONLY on your SIM card?
Open your Address Book, press the Menu key then click on Filters, and make sure no Filters are checked.
Now, look in the Address Book again.
Anything?
If not, please give some detail of your situation.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Data display grid font selection

Does anyone know how to change the font that's used on the "Data" tab when displaying the content of rows in a table?
I'm trying to view chinese characters which are stored in UTF-8 unicode in the database. I have all the necessary fonts loaded on my machine and the correct NLS_LANG settings.
I can see western characters, arabic, russian, greek OK in the data-grid, but not chinese or other far-eastern languages. Instead I see little squares instead of the symbols.
I've checked for font setting in Tools -> Preferences but the only setting I can find is under the "Code Editor" section. This is set correctly (to Arial Unicode MS) and if I copy the "little squares" from the data grid and paste them into a code-edit tab I see the characters correctly displayed.
So it seems that the "Font" setting for the code-edit tabs isn't used by the data-display tabs.
Is there a way of making both code-editor window and data-display tab use the same font?

i would create a standard report.
i presume the air pressure and humidity are from one field? if not create a formula to display that.
create groups
1- a/p humidity field or formula
2- time
3- ref-measure- error
not sure if they are the same field or different.
you can then place your data in the groups (formulas calcs etc)
then underlay the groups so they appear on the same line
then draw boxes around them.
hope this helps

Data display on remote cube

Hi Guru's
I've created a generic ds using fm for direct access.creating virtual cube and mapped accordingluy with ds.
Now when I do test extract on ds per a single posting day then it takes few secords to pull through the data and the no. of records are 45 on dev box.But I do data display on remote cub and it takes long and throughing a timed out error.
I dont have any routines on transformaions.
What could be the problem?
Nagesh.

HI
here's the code in FM
Example: DataSource for table SFLIGHT
TABLES: BKPF,BSEG.
Auxiliary Selection criteria structure
DATA: L_S_SELECT TYPE SRSC_S_SELECT.
Maximum number of lines for DB table
STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
counter
          S_COUNTER_DATAPAKID LIKE SY-TABIX,
Starting point for each data package
         READ_NEXT LIKE SY-TABIX,
Total Number of Extracted Records
         NO_RECS LIKE SY-TABIX,
Number read so far
         TEMP_CNTR(9) TYPE N.
cursor
S_CURSOR TYPE CURSOR.
Select ranges
RANGES: R_BLDAT FOR BKPF-BLDAT,
          R_BUDAT FOR BKPF-BUDAT,
          R_CPUDT FOR BKPF-CPUDT,
          R_BUKRS FOR BKPF-BUKRS,
          R_GJAHR FOR BKPF-GJAHR,
          R_BELNR FOR BKPF-BELNR.
DATA: GT_T_DATA LIKE ZFI_GL_4 OCCURS 0 WITH HEADER LINE.
DATA: GT_BKPF TYPE TABLE OF BKPF,
        GS_BKPF TYPE BKPF.
DATA: COUNTER(9) TYPE N.
DATA: LV_MONAT(3).
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF I_INITFLAG = SBIWA_C_FLAG_ON.
Initialization: check input parameters
                buffer input parameters
                prepare data selection
Check DataSource validity
    CASE I_DSOURCE.
      WHEN 'ZFI_GL_4'.
      WHEN OTHERS.
        IF 1 = 2. MESSAGE E009(R3). ENDIF.
this is a typical log call. Please write every error message like this
        LOG_WRITE 'E'                  "message type
                  'R3'                 "message class
                  '009'                "message number
                  I_DSOURCE   "message variable 1
                  ' '.                 "message variable 2
        RAISE ERROR_PASSED_TO_MESS_HANDLER.
    ENDCASE.
    APPEND LINES OF I_T_SELECT TO S_S_IF-T_SELECT.
Fill parameter buffer for data extraction calls
    S_S_IF-REQUNR    = I_REQUNR.
    S_S_IF-DSOURCE = I_DSOURCE.
    S_S_IF-MAXSIZE   = I_MAXSIZE.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
    APPEND LINES OF I_T_FIELDS TO S_S_IF-T_FIELDS.
ELSE.                 "Initialization mode or data extraction ?
Data transfer: First Call      OPEN CURSOR + FETCH
               Following Calls FETCH only
First data package -> OPEN CURSOR
    IF S_COUNTER_DATAPAKID = 0.
Fill range tables BW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'BLDAT'.
        MOVE-CORRESPONDING L_S_SELECT TO r_bldat.
        APPEND R_BLDAT.
      ENDLOOP.
      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'BUDAT'.
        MOVE-CORRESPONDING L_S_SELECT TO R_BUDAT.
        APPEND R_BUDAT.
      ENDLOOP.
      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'CPUDT'.
        MOVE-CORRESPONDING L_S_SELECT TO R_CPUDT.
        APPEND R_CPUDT.
      ENDLOOP.
         LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'BUKRS'.
        MOVE-CORRESPONDING L_S_SELECT TO R_BUKRS.
        APPEND R_BUKRS.
      ENDLOOP.
         LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'GJAHR'.
        MOVE-CORRESPONDING L_S_SELECT TO R_GJAHR.
        APPEND R_GJAHR.
      ENDLOOP.
          LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'BELNR'.
        MOVE-CORRESPONDING L_S_SELECT TO R_BELNR.
        APPEND R_BELNR.
      ENDLOOP.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
      SELECT * FROM BKPF INTO TABLE GT_BKPF WHERE BLDAT IN R_BLDAT
                                              AND BUDAT IN R_BUDAT
                                              AND CPUDT IN R_CPUDT
                                              AND BUKRS IN R_BUKRS
                                              AND GJAHR IN R_GJAHR
                                              AND BELNR IN R_BELNR.
      LOOP AT GT_BKPF INTO GS_BKPF.
        SELECT * FROM BSEG WHERE BELNR = GS_BKPF-BELNR
                           AND   BUKRS = GS_BKPF-BUKRS
                           AND   GJAHR = GS_BKPF-GJAHR.
          MOVE-CORRESPONDING GS_BKPF TO GT_T_DATA.
          MOVE-CORRESPONDING BSEG TO GT_T_DATA.
          CLEAR LV_MONAT.
          CONCATENATE '0' GT_T_DATA-MONAT INTO LV_MONAT.
          CONCATENATE GT_T_DATA-GJAHR LV_MONAT INTO GT_T_DATA-FISCPER.
          CALL FUNCTION 'BWFIU_GET_DOCUMENT_ORIGIN'
            EXPORTING
              I_AWTYP    = GT_T_DATA-AWTYP
              I_AWKEY    = GT_T_DATA-AWKEY
            IMPORTING
              E_REFBELNR = GT_T_DATA-AWREF
              E_REFGJAHR = GT_T_DATA-AWGJA
              E_REFBUKRS = GT_T_DATA-AWBUK
              E_REFKOKRS = GT_T_DATA-AWKOK.
Lcal currency calculations.
          IF GT_T_DATA-SHKZG EQ 'S'.
            GT_T_DATA-DMSOL = GT_T_DATA-DMBTR.
            GT_T_DATA-DMSHB = GT_T_DATA-DMBTR.
            GT_T_DATA-DMHAB = 0.
          ELSEIF GT_T_DATA-SHKZG EQ 'H'.
            GT_T_DATA-DMHAB = GT_T_DATA-DMBTR.
            GT_T_DATA-DMSHB = GT_T_DATA-DMBTR * -1.
            GT_T_DATA-DMSOL = 0.
          ENDIF.
Foriegn Currency calculations.
          IF GT_T_DATA-SHKZG EQ 'S'.
            GT_T_DATA-WRSOL = GT_T_DATA-DMBTR.
            GT_T_DATA-WRSHB = GT_T_DATA-DMBTR.
            GT_T_DATA-WRHAB = 0.
          ELSEIF GT_T_DATA-SHKZG EQ 'H'.
            GT_T_DATA-WRHAB = GT_T_DATA-DMBTR.
            GT_T_DATA-WRSHB = GT_T_DATA-DMBTR * -1.
            GT_T_DATA-WRSOL = 0.
          ENDIF.
          APPEND GT_T_DATA.
        ENDSELECT.
      ENDLOOP.
      DESCRIBE TABLE GT_T_DATA LINES NO_RECS.
      READ_NEXT = 0.
      TEMP_CNTR = 0.
    ENDIF.                             "First data package ?
Fetch records into interface table.
    IF ( READ_NEXT GT NO_RECS ) OR ( NO_RECS EQ 0 ).
      REFRESH GT_T_DATA.
      CLEAR:S_COUNTER_DATAPAKID, COUNTER, READ_NEXT, S_S_IF, NO_RECS.
      RAISE NO_MORE_DATA.
    ENDIF.
    COUNTER = 0.
    LOOP AT GT_T_DATA FROM READ_NEXT.
      COUNTER = COUNTER + 1.
      IF COUNTER GT S_S_IF-MAXSIZE.
        IF TEMP_CNTR EQ NO_RECS.
          CLEAR: S_COUNTER_DATAPAKID,COUNTER,READ_NEXT,S_S_IF,NO_RECS.
          RAISE NO_MORE_DATA.
        ELSE.
          READ_NEXT = READ_NEXT + COUNTER.
        ENDIF.
        EXIT.
      ENDIF.
      MOVE-CORRESPONDING GT_T_DATA TO E_T_DATA.
      APPEND E_T_DATA.
      TEMP_CNTR = TEMP_CNTR + 1.
      iF TEMP_CNTR GT NO_RECS.
        CLEAR GT_T_DATA.
        CLEAR: S_COUNTER_DATAPAKID, COUNTER,READ_NEXT, S_S_IF,NO_RECS.
        RAISE NO_MORE_DATA.
        EXIT.
      ENDIF.
    ENDLOOP.
    S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF.              "Initialization mode or data extraction ?
ENDFUNCTION.
If it's a code then why it's quick on rsa3?
Nagesh.

Feature Request: Better dimensional meta data displayed

Aside from every other problem with how Bridge lets the user display, sort and interact with meta data (aside from the actual metadata palette), it would be way more useful to have the Dimension meta data displayed under an image shown in 'real world' dimensions.
For example: I'm looking at my 'final images' that have been converted to CMYK, and sized for delivery. At this point Pixel Dimensions are pretty useless. What I really want to do is quickly scan my images, seeing Inches (or CM) with a PPI. My clients never ask for pixel dimensions (unless we are talking about the web, which we aren't) - they ask for 8.76" x 5.34" at 266ppi. It would just be nice to use bridge to double check the image sizes before delivery.
thks
andy

Thanks for you feedback. You wish has been granted (dimensions can now be displayed in pixels, inches or centimeters. Go to Preferences > Thumbnails to select which dimension to display below the thumbnail, or Preferences > Metadata to customize the metadata pane). Check out the free beta of Bridge CS3 (http://labs.adobe.com/technologies/photoshopcs3/)
Cheers,
Arno.
Bridge Engineering Manager, Adobe.

How to fetch the data & display the data if fields got the same name in alv

hi frnds, i need ur help.
how to fetch the data & display the data if fields got the same name in alv grid format.
thanks in advance,
Regards,
mahesh
9321043028

Refer the url :
http://abapexpert.blogspot.com/2007/07/sap-list-viewer-alv.html
Go thru the guide for OOPs based ALV.
Use SET_TABLE_FOR_FIRST_DISPLAY to display the table:
CALL METHOD grid->set_table_for_first_display
EXPORTING
I_STRUCTURE_NAME = 'SFLIGHT' Structure data
CHANGING
IT_OUTTAB = gt_sflight. Output table
You can also implement
Full Screen ALV, its quite easy. Just pass the output table to FM REUSE_ALV_GRID_DISPLAY.
For controlling and implementing the FS-ALV we have to concentrate on few of the components as follows :
1. Selection of data.
2. Prepare Layout of display list.
3. Event handling.
4. Export all the prepared data to REUSE_ALV_GRID_DISPLAY.
Regd,
Vishal

IPhoto 6 - Date Display Bug?

I've gone ahead and upgraded to iPhoto 6. Upon first launch, it asked to update the files which I did.
The new file hierarchy issues aside (Original/Year/Roll drives me nuts), I've noticed that while the calendar shows the correct pictures of the day selected, the Roll name is generic ("Roll 567", etc.) and the date of the roll is not correct.
For example, a roll taken on December 25, 2005 should have the date of 31/12/05 (or perhaps 12/31/05) but I'm seeing "12/05/05" and when I get info on a pic in that roll, the date taken is shown as "12/2005/2005".
I've deleted the plist but not sure what else I can try.

Figured out that the "corrupt" date display is due to custom format display settings for Date in the International preference pane. Set that back to standard and the photos are back to normal.

Video Playback in synchronization to data display

I've read a bunch of topics about recording live video, but my question has to do with playback synchronized to a data display. I've got a simple black and white camera (RS170) already. I'm going to get some sort of capture board. I want to record video from this camera to the hard drive. The reason is that this video file needs to be analyzed later so I need to store it on disk instead of memory as it could be days later. While I'm recording video, another signal needs to be recorded. It could be anything really, let us say temperature for discussion. Assume everything is in place for this temp. acquisition.
Recording video to disk doesn't seem to be any problem. My question relates to playing this video back such that when you play it, you can also look at a data display of the recorded temperatures that happened at the same time as the video was recorded. If you were to drag the video slider manually (instead of just pressing play), the data display would also update accordingly. This essentially syncs the data display of temperature with the video picture you are seeing. Pressing play and just watching the video, the temp data would update itself with the correct historical values. Pressing pause on the video, would of course freeze the temp display to the value at that time. Wherever the video is, the temp data would have to display the correct historical value.
I would need to record possibly a few hours of video a day so disk space could be an issue if using uncompressed AVI format. I wouldn't have to save every days video file so I could eventually delete a bunch of the files. I'd just save the days video that produces interesting results to examine later. A number of video files might build up (a months worth?) before the directory is examined for possible deletes. I'd like some feedback on this too from someone who has tried uncompressed AVI versus something else that is compressed. Is performance OK if using compression?
The computer I'd be running this on is the latest workstation class machine from HP so it is a fairly powerful computer.
Is there any sample code of doing this video playback indexing to data signal display? I'm thinking there would have to be some function to know where the video is playing at all times and then historically retrieve the temperature data. Is there performance issues with this? I'd want it fairly accurate such that the smallest increment of a video frame (say 30 times a second) produced a proper data display for temperature. In reality, my signal will change faster than a typical temperature value would.

I doubt this will satisfy 100% of what you're looking for, but it should at least get the conversation started on developing some techniques we can use to syncronize acquired data playback (again, let's say temperature) with some external source. I don't know much about video playback, so I won't be able to help you much there, but I do know a lot about leveraging LabVIEW technology to play back data in real-time as best possible, while allowing the user (or the video playback itself) to dictate a specific position at any time, pause, etc...
My first recommendation would be to save your acquired temperature data as a Waveform. Waveform is more or less like a cluster with three elements: a 1D array of Y-values, an intial time (t0), and the time between samples (dt). You can use these three pieces of information to reconstitute when each sample was acquired and what the timing should be configured for to play these samples back in real time. Search the web for information on writing Waveforms to file and reading them. You should find plenty there (or post somewhere else ).
After that, we can use a Timed Loop for playback. Timed Loops allow you to set a desired Loop period. They also have a lot of other capabilities, such as setting priorities, handling the fact that your last loop didn't finish on time, etc. Here's a link with more info on Timed Loops. Other than that, Timed Loops can operate like regular while loops.
My next idea is to incorporate a current position that we keep track of. This could be, for instance, the index of the current element in the 1D Y-values array. If you want this to involve user interaction with the front panel (for instance, changing a Slider value to reflect the playback position), then you could use an event structure with a timeout case set to zero. Then update the temperature value and increment the current position in the timeout case.
You might take a look at the example I've written in LabVIEW 7.1 that "acquires" 5 seconds of sine wave data and plays it back in real time. The user can adjust the position or pause the playback at any time. Again, I don't know exactly how this would interface with video feedback. If you have more specifics about what method you will use to playback the video, maybe someone with more expertise in this area could help us out.
Jarrod S.
National Instruments
Attachments:
Signal_Playback_Realtime.vi ‏223 KB

Ibooks author, how do I get the standard book pages background into my document. I have published one book so far which does not display with a book pages background or options for font size.

ibooks author, how do I get the standard book pages background into my document. I have published one book so far which does not display with a book pages background or options for font size.

No on the book title, no problem there.
The issue is: my book pages appear as on white paper, no background that resembles a open book and also no option to change fonts. The book was created in iBooks author, there was a problem going with the "Publish" menu route so I was instructed my Apple to "export" the file and submit that. I think that's the problem after reading that iBooks author is a hybrid epub file.
Thanks for getting back to me.

How can I exchange my whole data between my mac book pro and my iMac?

How can I exchange my whole data between my mac book pro and my iMac?

i use both, the macbook at work and the imac at home, but ineed to have the same data on both macs, how can i sync them?

How to filter the data displayed in a datatable

Is there a way to populate a datatable so that the data displays in a column only when it is different than the previous rows. For example if I have a List of InventoryItems that have properties State, WHouse, Widget, Count.
And I want to display them something like this:
 GA WH1 Widg1 255
 Widg2 566
 Widg3 999
 WH2 Widg1 100
 Widg4 55
 FL WH5 Widg1 687
 WH6 Widg5 566I hope the formatting comes out correct. The GA & FL should be in the first column. WHX in the second, WidgX in the third, and the count in the fourth.
I hope someone has an idea how I can achieve this effect.
Thanks

Yes, binding to the rendered property the way you suggested should do the trick.
FYI, here's an example that illustrates how the <if> component in JSFTemplating works:
<foreach key="key" list={"A" "B" "C"}>
 <!if !(#{key} = B)>
 <staticText value="Not B, it's '#{key}'" />
 </if>
</foreach>If you cut / paste that code into a file called test.jsf and run it in a JSFTemplating enabled application (follow the directions on the www site to run the demo app, drop it in that app), it will show values not equal to 'B" (A and C). FYI (#2): the <staticText> component above has a short cut syntax, so it could also be written:
<foreach key="key" list={"A" "B" "C"}>
 <!if !(#{key} = B)>
 "Not B, it's '#{key}'
 </if>
</foreach>FYI (#3): You can use any #{} you want in the <if> condition and can form complex boolean equations.
Good luck!
Ken Paulsen
https://jsftemplating.dev.java.net

Want date displayed with time on the top banner

Want date displayed with time on the top banner
On the top banner, I see signal, network, wifi, time, alarm, Bluetooth and battery. I want to see date and month and year too. How?

There isn't a way to display the date in a banner.. BUT - The calendar icon does display the date and day.
HTH

Data display in P Book

Similar Messages

Maybe you are looking for