Data display is not same as source
Hi,
I have developed WebI reports and data is correct. I copied BO SQL and run the query against databse, showing same number of records. Problem here is, displaying of data is different, I mean format.
How I can show data as DB is showing up.
Additionally,
Select that newly inserted column, and do formatting.
Like make fore & background color to white & white , and remove borders, and finally, use Autofit width (4 pixels).
Hope this helps you.
Gracias...!!
Similar Messages
-
E52 Date Display does not update and reflect the c...
Right from day 1 the display date of my E52 does not update and reflect correct the correct date. Got the phone replaced once still the same issue. Called the customer service and they say there is no such problem with E52. They asked me to go to the repair center...(isnt that ridiculous to ask a customer of a new phone to do so?). I went to the repair center with a hope that they will replace it for me but all in vain. They also gave me a ridiculous answer that Nokia does not have a replacement policy...and I was like so is it Nokia's policy to sell broken and faulty mobiles? I was utterly dejected. The electronic store where I bought also refuse to replace because they think there is a problem and no matter I get it changed it will recur. I still do not have a solution as all my ways of getting this problem resolved are exhausted. Anyone has a solution or came across this issue which can be solved without repairing?
Ok let me state my problem. There is a date display and at midnight the date should automatically change to the next date. However that does not happen. The dealer makes the following changes Control Panel>Settings>General>Date and time> Automatic time update> On and this does not solve the problem. Then I get the mobile replaced and that too has the same problem. after going through all permutations and combinations the problem persists. To quote the email from the Contact center for Nokia in HK this was what was suggested
Menu→Ctrl. panel→Settings→General→Date and time→Time zone→please select Hong Kong→Automatic time update→please select Off
However, if the situation still occurred by following the above settings, please be advised to bring your Nokia E52 along with the valid sales invoice to one of our Hong Kong Nokia Care Centres for the handset checking since we do not have such arrangement of replacing a new phone to you.
Please help!!! -
2 Displays but not same resolution!
i connected my mac pro with two identical 22inch displays one is connected with a DVI connector and the other with a VGA connector. hence, they have different display resolution... ironically the one connected with the VGA connecter has better display quality?
what seems to be the reason?i am sorry, but i am not very good at these things, so please be patient with me. what do you mean by native resolution?
both monitors are connected to the same graphic card 256 nVidia.
Left monitor (DVI cable) Resolution 1680x1050
Right monitor (VGA cable) Resoltuion 1680x1050
both displays are crisp clear but the Right, is slightly brighter thus better for viewing films and photos, knowing that all other settings are exactly identical (contrast, brightness, etc...)
thats why i am confused. the DVI cable cost me $50, so i was wondering if its worth the money! i want to know what are the benefits of the DVI cable over regular VGA, since it seems to me i am getting a better quality on the VGA cable. -
BI Idoc Type IS NOT THE SAME AS SOURCE SYSTEM IDOC TYPE
Hi all,
how can we solve the IDoc miss match in source system (ECC6).
Error :
BI Idoc Type ZSTC029 IS NOT THE SAME AS SOURCE SYSTEM IDOC TYPE ZSTC031
please provide me solutions..
Thanks in advance,
VenkateshHi Venkatesh,
Check here.........
BW idoc type not same as source system idoc type
Thanks,
Vijay. -
Data Services ORA-00942 table does not exist. Source/Target same DB
Error: u201CORA-00942: table or view does not existu201D
Source & Target Datastores in same Oracle DB but different User/Schemas.
I set up the Data Services Tutorial Source & Target Data bases in ONE Oracle DB using a separate User/Schema for the ODS source DB & TARGET Source DB.
I then created
- Source datastore for the ODS DB User/schema
- Target datastore for the TARGET DB user/Schema.
I have no problem reading flat files & writing to TARGET datastore tables.
However, when I read the ODS datasttore source table CUSTOMER & write to the TARGET datastore target table CUST_DIM I get an error: ORA-00942: table or view does not exist.
I can query the table contents from the Data Flow & see the data in the source data & see the empty target table.
So the tables exists & there is no security issues from the DS Designer.
I did find note 1189910 - ERROR: Error Description: An error occurred while creating the result data - Data Insight XI
Cause
Multiple engines are being run against the same metadata repository.
Resolution
Verify that only one engine is being run against a single metadata repository.
Has anyone seen this error?
Or has anyone created a 2 data stores on the SAME DB, but to different User/Schemas?
Thanks
Jay Roblesince you are accessing 2 schema which are on same oracle database, DS engine is trying to optimize and generating an INSERT INTO ... SELECT clause. Since its the same DB, DS Engine is doing a implicit linking of the datastores
you can see the SQL generated from the Designer, drill down into DF, from the Menu select Validation ->Display Optimised SQL
to disable this implicit linking, right click on the Dataflow, select properties
in the properties window, unselect the the option "use database links" -
Basic date is not same with schedule dates
Hi,
I have a problem in MD04 stock requirement list.
Planned order basic date and schedule date is not the same.
The schedule date finish at year 2010 but basic date still end ad 2009
in MD04, the date display is basic date.
Why the basic date is not adjusted?
in configuration i had choosen adjust basic date in scheduling planned order.
In material master in house production time is not updated because we use lead time scheduling
Please kindly help
Best regards,
Freddy HaHi,
i omit the scheduling maergin key in material master,
the result of MRP is
BASIC DATES
Finish 15.10.2009
Start 14.10.2009
PRODUCTION DATES
15.02.2010 14:33:25
14.10.2009 07:00:00
scheduling type i planned order is still "backwards"
so in MD04 it is say that the goods is available at 15.10.2009 same with requirement dates.
this seem not right.
it seems that order finish date is not adjusted by lead time scheduling on "today scheduling".
Is there a way so order finish date is adjusted by lead time scheduling on "today scheduling" ????
Best regards,
Freddy Ha
Edited by: Freddy Halim on Oct 14, 2009 10:01 AM -
SSAS Date Dimension attribute not displaying all members when browsed singly
I have an SSAS Cube database that holds data from 2009 to 2013 (5 years)
There is a Date Dimension in the database which holds a "Calender Period" Hierarchy with the attributes CalenderYear >> Quarter >> MonthYear >> Day .
I am connecting to the cube via Microsot EXCEL
Whenever i try to browse this hierarchy alone in the spread sheet, the first attribute as per the hierarchy shown above i.e. Calender Year does not display all the members, that is confusing the users to assume that the cube is not processed with the latest
data, which is not the case. However as soon as i try to browse any measure with this dimension, the data automatically shows for the latest dates of 2013 as per the expectations.
The perspective that is selected while connecting to the Cube in this case is the one that is by default the one including all the Cube Objects.
Whenever i try to browse the same cube for the same Dimension Hierarchy but in a separate user perspective i get the latest three Calender Years i.e. 2011,2012 and 2013 but not the complete years 2009 to 2013.
When i was browsing this earlier by the original base perspective (which has all the cube objects visible) the Calender Years displayed were 2009,2010,2011&2012 but not 2013 which should be there.
I checked the base view in the DB that is used to create this Dimension, that is fetching the complete data for 2009 to 2013.
I have also verified that this issue is still there if i try to browse the cube from the SSMS.
Can anyone help me to get all the years from 2009 to 2013 (the years for which my cube has data) become visible as soon as i drop it alone into the Spreadsheet?
Thanks
SuvratThanks for your response Muthukumaran.
I did not know about this default measure property of the SSAS cube, it would be nice if you could also tell me how to check which is the default measure for a cube.
I understand your point that if a particular measure group does not have data for a year then that particular year will be skipped as per the default excel settings, which when disabled allowed all the years to be displayed, but in that case every time the
users connect to the cube via excel, they will have to configure this property.
I would like to share the way i resolved this issue:
I went ahead and simply did a Process Full for the Date dimension. The years started to display by default as per the expectations. Now after observing this change, as per my understanding I believe this issue was due to the CACHE of the cube not being updated
for the date dimension. As after each incremental load of the DWH we processed the cube & while processing the cube the dimensions were set for a Process Update and the Measure Groups were set for a Process Full. This caused this issue, and we could resolve
this once the Date Dimension was processed full.
Thanks
Suvrat Rai -
i am trying to download adobe standard but it keeps saying reliable source serving corrupt data and will not download
Hi John,
Please try downloading from this direct Link (Download Acrobat products | Standard, Pro | XI, X ) and let me know if you still face the same error message:
Regards,
Rahul -
Data selected is not displaying but when refresh the browser it displays
The system brings back a record after the record is selected from the database. The data is in memory but is not display. When the browser is refreshed, the data displays.
Sorry but this is an internal system. The problem is baffling because there seems to be no consistency in its patterns. Sometimes when we pull up an account, it would show the info. Other times the same information does not come up. We thought it could be missing records, i.e. orphaned rows, but this isn't the case. It is quite odd and especially hard to bug because we can't consistently replicate it.
-
Did all these things mentioned in this article, even did a system reset including erase data and other settings. iOS is up to date, still the iPad 2 display is not rotating.
This happened first a couple of weeks before, then I did a reset and it worked. Then after 2-3 days it happened again, I updated the iOS and it worked after that. Next time it happened, I tried all possible methods, including switching to software - rotation lock on/off. The hardware when turns to off/on, shows the correct icon on the screen of the lock and unlocked state. But the rotation is not happening.Just check again.
If you see a lock icon in the upper right corner of the screen - then the screen orientation is locked.
Try the side switch above the volume rocker first and see if that unlocks the screen. If that doesn't do it, double tap the home button and swipe to the right and look for the lock icon all the way to the left.
If the screen is unlocked but still will not rotate, reset the iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
If the iPad screen still will not rotate - turn it over and gently tap it on the back a couple of times - but gently tap it. Make sure that the screen is protected. -
I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...
Has your carrier been having issues with Call Display? Do the telephone numbers come up when people call, or does it just show 'Unknown Number' or 'Blocked' ?
-
How to fetch the data & display the data if fields got the same name in alv
hi frnds, i need ur help.
how to fetch the data & display the data if fields got the same name in alv grid format.
thanks in advance,
Regards,
mahesh
9321043028Refer the url :
http://abapexpert.blogspot.com/2007/07/sap-list-viewer-alv.html
Go thru the guide for OOPs based ALV.
Use SET_TABLE_FOR_FIRST_DISPLAY to display the table:
CALL METHOD grid->set_table_for_first_display
EXPORTING
I_STRUCTURE_NAME = 'SFLIGHT' Structure data
CHANGING
IT_OUTTAB = gt_sflight. Output table
You can also implement
Full Screen ALV, its quite easy. Just pass the output table to FM REUSE_ALV_GRID_DISPLAY.
For controlling and implementing the FS-ALV we have to concentrate on few of the components as follows :
1. Selection of data.
2. Prepare Layout of display list.
3. Event handling.
4. Export all the prepared data to REUSE_ALV_GRID_DISPLAY.
Regd,
Vishal -
Date Format was not displayed correctly
Hi All,
We are developing WebDynpro Application successfully....but the date format was not displayed correctly.
the RFC Date format is : 05/23/2007
but in webdynpro we are getting date is wrong....we are getting date is : 09/05/2008.
the below one is our coding for date display format.....
public java.lang.String DisplayingDateFormat( java.lang.String date )
//@@begin DisplayingDateFormat()
// Current date Format in BW
SimpleDateFormat sdf = new SimpleDateFormat("MM.dd.yyyy");
String ChangedDateFormat=null;
try{
//Parsing String to Date
Date sqlDate =sdf.parse(date);
Locale userLocale=WDClientUser.getCurrentUser().getLocale();
DateFormat dateFormat = DateFormat.getDateInstance(DateFormat.DEFAULT, userLocale);
//Converting Date to String
String newDateString = dateFormat.format(sqlDate);
ChangedDateFormat=newDateString;
I mention my user country is Germany.
can u tell me any one why we are getting wrong date.....
Really i appreciate.
Thanks and Regards,
Abhiram.Too bad you can not offer yourself points. LOL
-
Dear Team,
Japanese characters alone are not passing correctly (passing like ??? or some unreadable characters) to Adobe application when we create input variable as XML data type. The same solution works fine if we change input variable data type to document type. Could you please do needful. Thank youHello,
most recent patches for IGS and kernel installed. Now it works. -
Display the date witch is not exist in my table
Dear Sir
I want to get the date which is not exist in this field C_DATE, when I compare between tow date, that is I let user enter from_date and to_date ,to get the date which is not exist in the CHEMICAL_CONSUMPTION table ,
And my table structure as the flowing:
SQL> DESC CHEMICAL_CONSUMPTION
Name Null? Type
C_DATE DATE
C_JOB_NO NUMBER(8)
C_BLOCK_TYPE VARCHAR2(10)
C_COLOR_TYPE VARCHAR2(10)
C_RUN_TIME NUMBER(6,2)
C_OPER_CODE VARCHAR2(10)
REMARKS VARCHAR2(450)
C_YEAR NUMBER(4)
C_DAY_REMARKS VARCHAR2(2000)
ORDER_CODE NUMBER(12)
RRQ_DOC_CODE NUMBER(12)
Can I compare this table with the dual table to display the date witch is not in CHEMICAL_CONSUMPTION .
Waiting for your valuable answer with example
Best regards
Jamil Alshaibanisomething like
SELECT *
FROM CHEMICAL_CONSUMPTION
WHERE C_DATE BETWEEN (:BLOCK.FROMDATE AND :BLOCK.TODATE)
OR C_DATE IS NULL;Just a guess.
Maybe you are looking for
-
How can multiple hard drives to be assigned to the same device/mount?
Every time I boot up with two or more drives besides the boot drive - the drives get assigned to different devices and their mount points get all mixed up. Is there a way I can prevent this?
-
How can we send only one message to a WCF service at a time? How we can limit the number of concurrent calls to a WCF service without use the Singleton pattern or without do the change in BizTalk Configuration file? Can we do it by Host throttling?
-
I previously was able to wirelessly ePrint to my HP Photosmart Plus e-All-In-One B210a using both my iPad & iPhone (both run IOS 5.1). For some unknown reason neither one can now print. I keep getting a message that the printer is no longer availab
-
I have also held doen the "control" key and nothing happens. The reason I am replacing the hard drive is because the previous hard drive gave me the same flashing folder and wouldn't open up to disc utility when I put in the tiger install disc. I am
-
XI 3.0 and external Java client/web service
Hello, I'm desperately tryin' to get an external system to work together with XI 3.0. The setup is quite simple: The external system is nothing but a simple Java program sending SOAP-based requests to a webservice. It is based on AXIS and is running