Data Distribution in the Data Volumes

Hello
Is it important that data be uniformly distributed in the data volumes?
Is it possible to redistribute the data after adding some more file?
Thank you & regards,
T.C.

As of MaxDB Version 7.7.06.09, such a mechanism can be activated using parameter EnableDataVolumeBalancing.
If the parameter EnableDataVolumeBalancing (deviating from the default) is set to value YES, all data is implicitly distributed evenly to all data volumes after you add a new data volume or delete a data volume.
https://service.sap.com/sap/support/notes/1173395

Similar Messages

  • Power view couldn't load the model or data source because the data source type is not supported

    Hi,
    I have SQL 2012 standard edition in my local. I have developed SSAS & deployed in local. I have been asked to develop power view report in excel 2013 using this SSAS. But when I tried to do in Excel 2013 professional Plus, I am getting below error:
    Power view couldn't load the model or data source because the data source type is not supported.
    Does power view is supported in standard edition of SQL or it requires Business/Enterprise edition of SQL server?
    Thanks in advance

    What type of SSAS install are you using?
    PowerView in Excel 2013 currently only supports Tabular data sources.
    Only PowerView in Sharepoint 2013 supports both Tabular and Multi-Dim data sources. (provided you have the required Sharepoint and SQL updates installed)
    http://darren.gosbell.com - please mark correct answers

  • I scanned an old photo but the date displayed is today, I want the date to be the date the photo was taken.  How do I change the date of the photo in iPhoto 11?

    I scanned an old photo but the date displayed is today, I want the date to be the date the photo was taken.  How do I change the date of the photo in iPhoto 11?

    There are two kinds of metadata involved when you consider jpeg or other image file.
    One is the file data. This is what the Finder shows. This tells you nothing about the contents of the file, just the File itself.
    The problem with File metadata is that it can easily change as the file is moved from place to place or exported, e-mailed, uploaded etc.
    Photographs have also got both Exif and IPTC metadata. The date and time that your camera snapped the Photograph is recorded in the Exif metadata. Regardless if what the file date says, this is the actual time recorded by the camera.
    Photo applications like iPhoto, Aperture, Lightroom, Picasa, Photoshop etc get their date and time from the Exif metadata.
    When you export from iPhoto to the Finder new file is created containing your Photo (and its Exif). The File date is - quite accurately - reported as the date of Export.
    However, the Photo Date doesn't change.
    The problem is that the Finder doesn't work with Exif.
    So, your photo has the correct date, and so does the file, but they are different things. To sort on the Photo date you'll need to use a photo app.

  • Will any of DDL command trigger a data flush from the data buffer to disk?

    Will any of DDL command trigger a data flush from the data buffer to disk?---No.164

    I mean if I issue the DDL commands Such as DROP, TRUNCAE, CREATE, Can these commands trigger a data flush action?

  • U201CValid Tou201D date set before the date that the report is run u2013 print u201Cnullu201D.

    Hi Experts
    I had a requirement for  the Query, when we executing the through slection screen we will be giving 0fiscyear "from and to" dates. the "Valid to" (0date)  has to check the relation of the Client partner and contract of relationship, if it is within the current date it should dipslay the report with values , if it is out of current date, it should display in the report as "null".
    Logic : This report is based on the u201CClient Partneru201D and the u201CContact ofu201D relationship. If any of these relationships have a u201CValid Tou201D
               date set before the date that the report is run u2013 print u201Cnullu201D.
    Could anyone of you provide the inputs on this.
    Thanks in advance
    Thanks
    Sekhar.P

    IvanLevo wrote:
    Could not find the /Library/Startup Items.
    Good, it shouldn't be there.
    For your Dock problem,
    Go to your Finder "Go" menu choose "Go to Folder" and enter ~/Library/Preferences. Then delete these files then restart or log out and back in.
    com.apple.Finder.plist
    com.apple.dock.plist
    com.apple.dock.db
    com.apple.dock.extra.plist
    Let us know

  • Can you add the data information to the data points in a chart

    I am trying to add the data information to the data points in a line chart.  can this be done?

    You can add Value labels to the series to show the numerical value at each data point. The control is in the Series section of the Chart Inspector (see green arrow).
    If you are asking about text labels, such as the "Test 1", "Test 2", etc. in column A of the table, You can add these by copy/paste into a text box placed in front of the chart, or use a formula ( =Table 1::A1 ) to transfer the text into a single cell table placed appropriately on the chart.
    Using single cell tables will allow automatic updating of the label if the content of the Table 1 cell(s) changes. Neither method will automatically reposition the label if there's a change in the data feed to the chart.
    Regards,
    Barry

  • Can SPM 2.1 or 3.0 BI standard  data model read the data form existing BI P

    Hi,
    I am curious to find out, can SPM 2.1 or 3.0 BI standard  data model read the data form existing BI Procurement  (Cubes and DSO's) with no customization mapping?
    i know SPM 2.0 do not have that flexibility (Standard data model can read from BI), we would have to map transformation.
    I would appreciate your response..
    Rgds,
    Mahesh

    Hi Mahesh,
    What you can do in SPM30 is create an export datasource for existing BI objects and use them as direct datasource in SPM using template mapping.
    Direct transformations from BI object to SPM objects is not provided.
    Regards,
    Divyesh

  • Data deleted in ODS, data coming from the data source : 2LIS_11_VASCL

    Friends,
    I have situation :
    Data deleted in ODS, data coming from the data source : 2LIS_11_VASCL.
    when for the above ods and the data source when trying to delete the request whole data got delted.
    All the data got deleted in the fore ground. no background job has been generated for this.
    I ma really worried abt this issues. can u please tell me what should be the possibilities for this issue.
    Many Thanks
    VSM

    Hi,
    I suppose you want to know the possibilitiy of getting the data.
    If the entire data is being deleted, you can reload the data from source system.
    Load the setup table for your application. Then carry out init request.
    Please note that you would have to take a transaction-free period for carrying out this activity so that no data is missed.
    Once this is done, delta queues will again start filling up.

  • How to get from Apple (officially) details on my iphone 5 (knowing the serial number): model, date of sale, the date of activation, etc.

    How to get from Apple (officially) details on my iphone 5 (knowing the serial number): model, date of sale, the date of activation, etc. I bought a new iphone 5 on ebay.com - he was used. For a decision on my case ebay asks for this information ...

    Apple will never reveal that info to you, since you were not the originally purchaser. However, you can get the date of sale by entering the SN here:
    https://selfsolve.apple.com/agreementWarrantyDynamic.do
    Warranty starts on the date of sale, which is most likely the date of activation, but not necessarily so.

  • My Ipad will not unlock.  When I slide to unlock it speaks 'unlock key', if I touch the date it 'speaks the date', but I cannot get into the pad.  Was working fine yesterday, any suggestions would be appreciated.  Lisa

    My Ipad will not unlock.  When I 'slide to unlock it speaks 'unlock key', if I touch the date it 'speaks the date', when I turn it on is 'speaks the time', but I cannot get into this ipad at all.  It was working correctly yesterday, any idea's would be appreciated.

    Your iPad is likely stuck in in VoiceOver mode.  Try triple-clicking the home button or connecting your iPad to iTunes on your computer.  You can disable VoiceOver in iTunes from the iPad's summary page by scrolling down to the Options box and clicking on Configure Accessibility.
    Good luck!

  • Log "date completed" to the date when "completed" was updated to "yes

    Hello,
    I want a workflow to fill "date completed" with the date when "completed" is updated to "yes". I am using Sharepoint Designer 2013.
    I have been through hours of research but I could not find any post clear enough to me. Please do not refer me to ancient threads.
    Thanks!
    PS: Below find what I have tried. It does not return anything in "date completed" in my task list...

    Hi Edouard,
    According to your description, my understanding is that you want to set the ‘CompletedDate’ when the ‘Completed’ is Yes.
    You can set the workflow like the screenshot below:
    And set the workflow started when a new item is created or an item is changed.
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • Material Master data distribution using the Classifications

    Hi All,
    I am attempting to cater for a business scenario where we wish to distribute material master records via IDOCS by assigning a class to each material we wish to send out. 
    We have a new classtype (Z01) which is setup for distribution purposes (the status for this class type has been maintained).  I have defined a filter using classes in BD60.
    The next step was to setup the distribution model for my message type and partner.  I added the filter group in the distribution model for the message type (filter group "dependant on class membership").  The final step after generating the partner profile was to assign a new class that I created to the material master.
    We are using change pointers and BD21 to create the IDOCs.  I am managing to create the outbound IDOC but I am getting a 29 Status with an error message "Class type Z01 , receiving system ZFR001 : no list maintained".  ZFR001 is the name of the external partner.  The name of the class that has been assigned to the material master is also ZFR001.  There are no characteristics assigned to the class.
    Has anyone setup a similar scenario?  I'd appreciate any guidance as I have hit a bit of a wall.
    Best regards,
    James.

    Hi,
    The message type to send HR data is HRMD_A, i don't think that filtering this only message you achieve what you describe.
    In this message type, yo can define filters to send only the relevant infotypes that you need, but all of them will be send in the same idoc, for one employee.
    So I think to achieve what you want, you should create customer Message types (Z's) as reductions of HRMD_A standard message type and then in BD64 create one different Model for each one. So in each model you can put only the infotypes you want. You should very carefull with the updating in your destination system, because if you process all the message type at the same time, there will be a lot of blocking in employee objects.
    It is weird what you want to do, but this could be the solution.
    Regards,

  • How to validate plan data before saving the data

    I have a total row in my planning layout which is a summation of plan data in 2 other rows. While saving the data, I should check whether the total is 200 and if not the data should not be saved. How can I achieve this! Any help would be appreciated.
    Regards,
    Tipo.

    Hi,
    I'm also facing the same problem in my development...I tried above all the ways,but we cannot stop saving the wrong data.In this case you have to write the java script for save button, before saving the data if it is correct then go for the next step to save other wise throw an error message or without save the data .
    You need to write the JAVA script for save button,in this code you need to read the data form the layout and check the total value, i am not sure if layout is dynamic how we can achieve this???.
    My development also stopped for this issue,In my case i  have two layouts ,one is for actual and another one is for Planing layout(Function - Distribution equally),using the fox code i succeed to read and throw an error message for incorrect data but i can not stop to saving for incorrect total data.
    Once you solved this problem please post the message in SDN.This type of requirements is very tough and we need to share to our friends.
    Thanks.

  • IPhoto imports photos with wrong dates even if the dates are fine on the camera

    Hi!
    When I import photos with iPhoto, sometimes it imports them with wrong dates, even the dates are fine on the camera. It puts dates such as 2032. Does anyone know how can I fix that. As far as I know there is no way to change dates of the photos.
    Thanks!

    well that is very confusing since if the date is correct on the camera it will be correct in iPhoto
    and as to
    As far as I know there is no way to change dates of the photos.
    Try looking through your iPhto menus - two commands - adjust time and date and batch change time and date - asjust is used to correct incorrect dates like a comera setting -   Batch change for missing dates like with scans
    LN

  • A Date prompt defaulting the data in Report based on selection

    Gurus,
    I have a requirement , where i have a (in between) date prompt set in the dashboard current defulting to Start Month date and End Month date of current month.
    What the user want is based on the selection using a drop down in dashboard which has got values Last Day, Last week, Last Month , the default values in Date filter should change in dashboard.
    For Eg. If the user select Last Week, the in between date filter show the default date value as Last Week Mon and Last Sun, and should filter out the report based on that.
    Any idea's are welcome....
    Thanks & Regards
    -Saurabh

    Try to see if you can get user to agree on something easier.
    Here are the steps to achieve what you want.
    1. Create a prompt for 1 day, 2 week, and 3 month
    2. Create three separate reports based on above selection, which has page prompt for day/week/month respectively.
    3. Create GN based on step in 1 and then let UI change between three reports you created in step 2
    I hope this helps,
    Best luck

Maybe you are looking for