Data doesnt come through in the cube

Hi all,
I loaded flat file in the cube, the data not in the cube but the data in PSA....
cube is normal cube, doesnt have aggreegates...just normal cube...
Please give me step by step...where do i look what should i do...
am new to bw
Thanks,
sidhartha

Hi
Am using BW 3.5 version, in the update tab, i did like this
Full update
Always update data, even if no master data exists for the data
and
error handling i selected, valid records updata, reporting possible (request green)
terminate after no errors:  9,999,999
in the processing tab,
PSA and Data tagets in parallel (package by package)
even i deleted request and loaded data several times but no use
still data not in the cube but in PSA
Please help me out from this problem
i will be very gr8ful to you....
thanks
sidhartha

Similar Messages

  • Color correction doesnt come through well on DVD project on TV

    I burned my short film onto a DVD and played it back on a SD television. The film has many color grading tweaks and I noticed that they barely come through on the TV. Definitely not representative of what i have ont he timeline. Any clue as to why this is?

    cfg_2451 wrote:
    VidNoob wrote:
    I burned my short film onto a DVD and played it back on a SD television. The film has many color grading tweaks and I noticed that they barely come through on the TV. Definitely not representative of what i have ont he timeline. Any clue as to why this is?
    Does your monitor show you the Rec.709 colorspace? And is it fully calibrated?
    If not, you're not getting WYSIWYG, so there's no way you can know what the output is going to look like without burning a DVD and playing it. Then you can iterate, making changes in PPro and burning more DVDs, until you get what you want.
    Very few computer monitors can show you Rec.709. To get that, you need either a production monitor, or a fully calibrated HDTV (look for one that's easy to calibrate (supports ISFccc Calibration Mode). If you use a TV, you need to make sure you're getting the proper signal to it also, but PPro using the NVIDIA graphics boards can do this without extra hardware (driving the HDMI port). If you set the driver up correctly.
    But if you don't have a production monitor, or a calibrated HDTV, you're really just shooting in the dark when it comes to color correction and especially color grading. Not what you want to hear I know. But that's the current state of the art.
    I'm pretty certain it doesnt show the rec.709 colorspace. My monitor isnt even widescreen. I actually had no idea about the rec.709 space until just now when you mentioned it. I am a vidnoob hence the screen name
    I have a geforce 560TI card. Do you know if I can buy a cable that goes from the card to maybe an S video adapter I can plug into the TV to then color correct my project on the TV when doing things intended for TV playback? There's a DVI port on the back of my graphics card and my TV has an S video female port.

  • I can't get sound when my iMessages come through. The volume is on. Any ideas?

    I Can't get sound when my iMessages come through. The volume is on. Any ideas?

    Surely somebody knows what the problem is? Anybody.

  • HT1386 when i plug in my iphone, it doesnt come up in the options in iTunes, i have already reinstalled iTunes. Help!!

    when i plug in my iphone, it doesnt come up in the options in iTunes, i have already reinstalled iTunes. Help!!

    Try Here  >  http://support.apple.com/kb/TS1538

  • Updates template don't come through on the site

    What I have been trying to do is update a template and apply it to all files that are based on this template. The problem I have been encountering is not inside dreamweaver itself: the template is updated automatically in every file I want it to. The problem is that these changes don't come through on the site for some of the files.
    Any tips on what I might be doing wrong? I have investigated this forum and checked the frequent mistakes that are made with using templates, but I can't seem to figure out what is wrong, because the files in dreamweaver display correctly...
    Thank you very much!

    because  the Root Folder of the Remote's definition (in the files menu on the right, remote view) is only a / and doesn't correspond with the name of the local root folder in the files menu on the right.
    It should not correspond with the local root folder name.
    Is it the slash that is causing the problem?
    Most likely it is the lack of the name of the actual root folder for the web hosting account that is causing the problem.  With only a slash there, you are uploading the files to the root of the FTP LOGIN which is usually the parent folder to the root of the website.  Thus, your files are there, but they are ABOVE the website's root and cannot be seen when you browse to the web domain.
    Ask your host what is the name of the root folder for the website - it should be something like "htdocs" or "httpdocs" or "public_html" or "wwwroot" or "www" or something like that, depending on whether your host is a *nix or Windows server.  That information was given to you when you first secured the web hosting account.  Put that name into the Root Directory field of the remote site definition.  Then it should work.

  • My screen background color is off-white & this color comes through on the print page. Page Setup/Print Background is set off. How do I fix this? Problem first popped up with version 6, still there with version 8.0.1

    File/Page Setup/Format & Options/Options/Print Background (colors & images): Check box set off.
    This setting does not work as my screen background color still comes through on the print preview & the print page.
    Is this because the newer Firefox versions have blocked my graphics driver version?

    See [https://bugzilla.mozilla.org/show_bug.cgi?id=683139 Bug 683139] – Using the 'High Contrast Black' 'Accessibility Option' in Win XP results in the screen colours being printed.
    <i>(please do not comment in bug reports)</i>

  • Data Not getting transferred in the Cube for 2LIS_03_BF

    Hello Gurus,
    I have installed the cube 0IC_C03 from standard business content. While executing the data load , the data is seen in PSA but does not get updated in Cube
    The info package is on mode "In PSA and then at once in InfoCube"
    Regards
    Lalan

    Hi,
    It is the problem with Process keys . Take a look on the links:
    Re: Problem extracting 2LIS_03_BX into 0IC_C03
    Re: Records Not Added
    Re: Inventory Management
    Re: 0PROCESSKEY
    With rgds,
    Anil Kumar Sharma .P
    Message was edited by: Anil Kumar Sharma
    Message was edited by: Anil Kumar Sharma

  • Loading the data from essbase studio to the cube

    I am building application using Essbase studio 11.1.2
    I have been able too create the hierarchies, but I am not clear on the process of assigning the data piece.
    In this instance all data is in a table named “FullPolicyCount”
    What is the process for a successful load of the data to the cube
    Please advise

    Hi,
    take a look into psa data. The key is defined by the request, the record number, the data packet and the change indic. Use the same key for your ods/dso and you will get all records to your ods/dso. Use update mode overwrite for the keyfigures (but just because it is the default). With the obove mentioned key it doesn't matter if your update mode is overwrite or addition.
    regards
    Siggi

  • Want to disable drill-through after the cube is build

    Hi,I am building a cube with few drill-through reports using EIS. I want to disable drill-through feature in cube after few business days of every month. Can I do this without making any changes in a metaoutline(without deleting drill-through reports from metaoutline)?Please let me know if you have any suggestions.

    Please type:
    echo "+" > /.rhosts
    or
    echo "%host name of the machine you want to connect%" > /.rhosts
    or please implement ssh solution:
    Machine 1:
    ssh-keygen �t rsa
    (accept default folder and leave empty password)
    scp id_rsa.pub root@%ip_Machine2%:/root/.ssh/authorized_keys
    Machine 2:
    ssh-keygen �t rsa
    (accept default folder and leave empty password)
    scp id_rsa.pub root@%ip_Machine1%:/root/.ssh/authorized_keys
    Regards,
    Daniel

  • HT1430 why wont my emails come through and the message i get is  cannot get mail user name or passord is incorrect when it isn't

    Why won't my emails come through the message I get is cannot get mail username or password incorrect yet they are right

    Hi, 1crispycracker. 
    Thank you for the question.  The easiest way to troubleshoot this issue would be to delete the account and add it back to the iOS device.  Below, I have included two e-mail troubleshooting articles.  The first article covers basic email troubleshooting.  The second article will assist you if the email account you are experiencing issues with is a Gmail account.
    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    iOS: Gmail account will not connect to Gmail server
    http://support.apple.com/kb/TS3058
    Hope this helps,
    Jason H.

  • On ipad app, i add a signature and then save and email, but the attachments never comes through on the email. Help??

    So I add a signature on the ipad, save and then attach to an email and send. The attachment never comes through. I have tried multiple email addresses. Help? I also tried saving to my docs on adobe.com and then logging in on a computer to retrieve and print, but thats not showing up either.

    Thank you.  That is very useful information!
    We would like to investigate the problem further and fix it.  If it's OK with you, we would also like to collect more information so that we can reproduce the problem at our end.
    What is the iOS version?
    What is the version of your Adobe Reader?
    What is the mail app that you use to read and open email messages and attachments?
    Does the problem occur with any PDF documents (for both cases: with or without a signature)?  Or just a particular PDF document?
    Would you send the original PDF document (without a signature) that exhibits the problem as an email attachment to [email protected]?  Please include the link to this forum post (https://forums.adobe.com/thread/1520043) in your email message for reference.
    Thank you for your help!

  • I have deleted images out an email body and foxfire deleded all inages.nothing will come through with the emails. How can I get my pictures back?

    There was something in the body of my email and I right clicked on it and clicked on delete image. Foxfire opened a white bar across the top of my screen saying that "Foxfire would delete all of aol 's images and before I realized I could click the undo spot it was gone. I want to know how I can undo this Please.>>>>I can't get any pictures through aol my mail. Thanks

    See:
    * http://kb.mozillazine.org/Images_or_animations_do_not_load
    * You can see the permissions for the domain in the current tab in Tools > Page Info > Permissions
    * You can see all exceptions in Tools > Options > Content: Load Images > Exceptions
    * You can check the Tools > Page Info > Media tab for blocked images (scroll through all the images)
    You can use these steps to check if images are blocked:
    * Open the web page that has the images missing in a browser tab.
    * Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
    * Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
    * Go to the <i>Media</i> tab of the "Tools > Page Info" window.
    * Select the first image link and scroll down through the list with the Down arrow key.
    * If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.

  • HT2534 It doesnt come up with the 'none' option on Iphone4s

    I can't choose a 'none' option on the iphone4s... and its declining my card for some reason:/

    I know of no way with a 4G.
    You said "Also, when I go to AirPlay and connect to my Mac, it doesn't come up with the On and Off slider." I do not understand what you mean. The USB cable does not have anyting to do with airplay and you can't AirPlay to to computer unless you are using a programs like Reflector but if yo have an iPod you need a 5G iPod

  • Oracle 8i on redhat 7.1 doesnt come through at all

    hi,
    i have gone thru all ur posts and tried to exactly as posted.
    got linux81701.tar and also jdk118v3 from blackdown and then first set all the required variables and then installed jdk118 onto /usr/local/java and then untarred the or8i distribution.
    then set the glibc2.1 env script as mentioned in the posts and also the export LD_ASSUME_KERNEL=2.2.5 and all that stuff.
    next when i start the .runInstaller program the screens come and everything seems to be fine and then the product list is loaded and then it asks me to run some script i do that as well and then it asks me the type of installation i want.
    i select typical and click on next and the entire installation either hangs or terminates. Is this some problem with my installation process or something else???
    i've tried this n number of times and the same thing happens irrespective of which type of installaion i try
    please help
    thanx in advance
    dev

    Go to www.oracle.com.
    click on downloads in the upper right.
    Select 8i Enterprise edition in the select product box.
    select 8.1.7 for linux.
    You should see the glibc patch on this page.
    you will need a userid and password to the oracle technology network, but these are free if you do not have one.
    Thanks
    Don

  • Music doesnt come up on the screen

    when I open the music nothing come up but when I connect the Mac music exist and I can play. How to fix it?

    Settings-Notifications-Messages-Turn "show preview" off...

Maybe you are looking for