Data doesnt show when report is run but shows in preview mode or exported to PDF

I have tablix and sub reports in that tablix.. When I run the report and go to the second page i dont see any data from the sub report... but if i export it to pdf i do see data in that spot...
What should i do to fix it? the page size for this report has been set for legal I have tried messing with the page size and removed the margins for the sub report...
Any help will be appreciated.
Thanks
Karen

Hi Karen,
As per my understanding, I think this issue can be caused by Interactive Size. InteractiveSize is used by the HTML rendering extension to provide the equivalent of Page Size. Because the HTML rendering extension dynamically resizes a report to accommodate
drilldown, drillthrough, and show/hide features, the report server uses different properties to support pagination on dynamic pages. So please check the InteractiveSize of the report, make sure it uses the same size as PageSize.
If there are any misunderstanding, please elaborate the issue for further investigation.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

Date not showed when report is viewed in PDF .

Hi,
We have a text field that shows the date on which the report is running.Date is not showed when report is viewed in PDF.But in HTML we can view them . Can any one help me out?
Totally there are four pages for the report.

I have observed the PDF driver iin EPM 11.1.2.x is not up-to-date and technically the Date (Text) is there just like in HTML. However, when you increase the View (Zoom in), it eventually does show up.
I have chatted with Oracle Support, and they will not address it with a patch for now.

I cannot get the Output Module to work. I was able to get the button to show up, but when I click on it, nothing happens. i need to export a PDF asap

I cannot get the Output Module to work. I was able to get the button to show up, but when I click on it, nothing happens. i need to export a PDF asap. I am trying to export 33 PSD files in BRIDGE to a PDF like I used to do on my other computer with bridge.

Let's start with the general things.
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
orange Firefox button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page. Does that help?

Use same database logon as when report is run

Is there a way to set the option for "When viewing report" to "Use same database logon as when report is run" for all reports?

If scheduling we have schedule manager in XIR2 which will do a folder at a time, it's been added to the CMC in 3.x I believe.
For running the reports I think you would need to use the [SDK|/community [original link is broken]; if if you wanted to modify a bunch of reports at the same time, or use the publishing wizard to publish a bunch of them (no use if the reports are already uploaded)
Regards,
Tim

Why my apps are not transferring from PC to iPhone 5? When I connected to PC the icon shows when I select apps it show 'will install' but it never show on iPhone, I re installed iTunes, deleted all apps and downloaded again but its not working pls help.

Why my apps are not transferring from PC to iPhone 5? When I connected to PC the icon shows when I select apps it show 'will install' but it never show on iPhone, I re installed iTunes, deleted all apps and downloaded again but its not working pls help.

Next time an app update gets stuck try a reset. Press and hold both the home and power buttons for10-15 seconds till the Apple logo appears. Then release both buttons. Wait till your iPad starts on it's own. Try now. Also YouTube is still available. If you can't find it the the app store go to the bottom of the app store page and tap purchased. All your deleted apps will be listed and you can reinstall YouTube from there.

I have an old Ipod that won't show up on Windows Explorer but shows in Itunes., I have an old Ipod that won't show up on Windows Explorer but shows in Itunes.

I have an old Ipod that won't show up on Windows Explorer but shows in Itunes., I have an old Ipod that won't show up on Windows Explorer but shows in Itunes.

In iTunes, select the iPod in the iTunes sidebar, under DEVICES. Over to the right, go to the Summary tab.
There should be a checkbox that says Enable disk use. Check it and Apply the change. It should now appear in Windows, when the iPod is connected.
NOTE: When Disk Use is enable, you have to eject the iPod (in iTunes) before physically disconnecting it from computer.

My external HD stopped showing up on my desktop, but shows up in my Disk Utility.. I have tried a disk verify and repair - sometimes that works and completes, sometimes it doesn't. Either way, it wont eject or mount, and still doesn't show up on desktop.

My external HD stopped showing up on my desktop, but shows up in my Disk Utility..
I have tried a disk verify and repair - sometimes that works and completes, sometimes it doesn't.
Either way, it wont eject or mount, and still doesn't show up on desktop.
There are no ticking noises coming from the hard drive, and it lights up still, and i have tried replacing the cords, and restarting/shutting down the computer, and have tried it on a mac desktop also - same problem.
Any help would be great!!!

and have tried it on a mac desktop also - same problem.
Try this on one of the Macs ...
Open a Finder window. From the menu bar click Finder > Preferrences
Select the General tab then select: Show External Disks

I have adobe export PDF since a few months but since yesterday I can't export my PDF documents to word ! can you tell me how to do it again?

I have adobe export PDF since a few months but since yesterday I can't export my PDF documents to word ! can you tell me how to do it again?

Hi ceop,
It seems earlier you were able to use it.
It is not clear why you are facing this issue now.
You can try it with another pdf file,It might be possible that there is some issue with your pdf file.
Regards,
Florence

Maximum Line Width when Report is running in background

Hello Experts,
I have written a ABAP program and user is running in background. My output is of width of 599 characters. But wehn the user is running in the background, it is showing a warning that last 345 columns won't be displayed.
What is the maximum width, that is allowed for report being displayed in background.
Kindly help and points will be rewarded. its really urgent.
Thanks in advance.
Thanks and Regards,
Saurabh

Hey Saurabh,
I am facing the same problem. I have a report which has 406 characters. It is displayed correctly when executed in foreground but only 255 characters when executed in background.
You have resolved this issue. Can you please provide me the solution to execute it in background and get the complete output.
Regards,
Anosh

Pop up message on the variable screen in portal when report is run

Hello
I have a requirement to pop up a message stating " Date should not be entered before 2010 "on the variable screen of the report if date is entered before 2010 by the user when the report is run.
Please can someone tell me how to implement this?
thanks

Hi Tom,
The logic could be to include code in CMOD forat variable with ISTEP=2.
IF I_STEP = 2.
LOOP AT i_t_var_range into wa_t_var_range where vnam = 'Date Varaible'
<write condition to check the year entered. First, using function module DATE_TO_PERIOD_CONVERT, extract year from Date>
<   CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
        EXPORTING
          I_DATE               = ZT_SDT
        I_MONMIT             = 00
          I_PERIV              = 'Variant'
       IMPORTING
         E_BUPER              = zbuper
         E_GJAHR              = zbdatj this is the year entered
       EXCEPTIONS
         INPUT_FALSE          = 1
         T009_NOTFOUND        = 2
         T009B_NOTFOUND       = 3
         OTHERS               = 4>
>
Then check the year for the condition.
If correct.
exit.
else.
CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
EXPORTING
I_CLASS = 'RSBBS'
I_TYPE = 'E'
I_NUMBER = '000'
I_MSGV1 = 'Date should not be entered before 2010'.
raise again.
endif.
endif.
endloop.
Hope this helps you.!
-Pradnya

MAX shows PXI card when booted into Windows but not in Hypervisor mode

Hello again all you helpful forum-goers!
I'm having some difficulties with a Hypervisor system seeing the two Pickering 6 channel programmable resistor cards that are loaded into the PXI chassis. When I boot into Windows mode, MAX sees them under the My System just fine. When I then run the Hypervisor configuration software, I see them both listed, and have them assigned to the Real-Time OS. However, when I then boot into Hypervisor mode, MAX does not see them under the Remote Systems -> Hypervisor Target -> Chassis (or anywhere else), and the drivers report not seeing any modules either when I debug my code running on the real-time system.
Does anyone have any idea what setting or configuration I might have incorrect? Is there any other information I can provide that would be relevant or useful to answer this question? I'm not the main hardware guy, he just got married and so isn't available, so I'm out of my comfort zone. ;-) I write the software that runs on the system, though, so I'm not completely clueless. I know we just replaced the controller in the main chassis with a faster one (unfortunately I don't have the number on hand, the simulator is down in the lab), but I also know we are using that same controller and Pickering card on a different simulator and it is working just fine.
Any ideas? I very much appreciate your time!
-Joe
Solved!
Go to Solution.

Nevermind, the answer turned out to be that I did not have the drivers fully installed on the real-time system. Apparently that caused it to not recognize the cards. I never did figure out / remember exactly how to install the Pickering drivers on the real-time side, but fortunately I was able to just copy all the files that had "Pickering" in their name from the C:\ni-rt\system folder of the real-time file directory from another simulator to this one. ;-)
Cheers!

Firefox OS 1.3 simulator doesn't work.(runs but shows a black screen)

I am learning app development for firefox os.I installed a simulator for version 1.3 at my work place and it was working fine.I could write simple web app and run on the simulator.But when i installed the emulator on my home pc It was installed successfully but then was showing just a black screen.I am sure i have installed the correct version.I am using firefox 30.The simulator does show up in the app manager but when i start ,it just show a black screen.I don't understand why this is happening.I tried installing other versions like 1.4,but same thing happens for all the simulator addons.what could be the problem?

Hi prathamesh_13,
Thank you for your question. There should not be a black screen, and is sounds like you have already reinstalled the simulator on the second computer.
If the simulator does not show up on the app manager it may not have been properly installed.
Can you enable verbose logging:
You can see messages logged from your app in the Web Console, which you can attach to your app using the App Manager. If you want to catch early messages happening during app startup, before the console gets connected and working, you can enable verbose logging in the Simulator.
Visit about:config and create a new preference. The preference name is different for each version of the Simulator:
[email protected] for Firefox OS 1.3
[email protected] for Firefox OS 1.2
Set it to the string value "all", and disable, then reenable, the add-on in the Add-on Manager. Now extra messages about the Simulator's operation will appear in the Browser Console.
Reference: [https://developer.mozilla.org/en-US/docs/Tools/Firefox_OS_Simulator MDN doc for Firefox OS Simulator]

Invalid Index Error when Report is run on Web

Post Author: mhamill
CA Forum: Crystal Reports
I have a report which is being published and viewed on the web via a CrystalReportViewer app to display the reports (.rpt files)All other reports are running fine.
When I run this new report in Crystal on my desktop- It works fine. When I publish to the web I get this error:
System.Runtime.InteropServices.COMException: Invalid index
[COMException (0x8002000b): Invalid index.] CrystalDecisions.ReportAppServer.DataDefModel.FieldsClass.get_Item(Int32 Index) +0 CrystalDecisions.CrystalReports.Engine.ParameterFieldDefinitions.get_Item(Int32 index) +30 CrystalDecisions.CrystalReports.Engine.ParameterFieldDefinitions.get_Item(String fieldName) +46 CrystalDecisions.CrystalReports.Engine.ReportDocument.SetParameterValue(String name, Object val) +144 webViewer.webViewer.Page_Load(Object sender, EventArgs e) in C:\Inetpub\wwwroot\reportTool\webViewer\webViewer.aspx.vb:68 System.Web.UI.Control.OnLoad(EventArgs e) +67 System.Web.UI.Control.LoadRecursive() +35 System.Web.UI.Page.ProcessRequestMain() +750
I have REMOVED the parameter field from the report and still get this error. When I view the SQL there is no WHERE clause in the statement.
Any Ideas? It is an elaborate report and I dont want to start over.

Post Author: Ted Ueda
CA Forum: JAVA
The PSReportFactory service, CR Page Server, is only for viewing Crystal Report formats, and not instances in other formats.
For the other formats, ensure you list the SI_FILES property in the InfoStore query, then cast the resulting InfoObject to IContent. The IContent interface support methods to stream the file content from the File Repository Server.
Sincerely,
Ted Ueda

Weblogic 10.0.1.0 - Server shows in console as RUNNING, but unreachable.

It seems the admin server loses contact with some (not all) managed servers, all of these are responsive and work correctly, but you can't use the admin console for monitoring or everything else.
In the server list view you can see they show as RUNNING, but Health column is empty and all other "interactive tabs" show as if the server is not reachable.
Any idea what's wrong and which patch could solve it? I tried to find a specific patch for this problem but found no description matching.
Thanks in advance.
Edited by: ezra-s on 05-mar-2012 13:10

It seems the admin server loses contact with some (not all) managed servers, all of these are responsive and work correctly, but you can't use the admin console for monitoring or everything else.
In the server list view you can see they show as RUNNING, but Health column is empty and all other "interactive tabs" show as if the server is not reachable.
Any idea what's wrong and which patch could solve it? I tried to find a specific patch for this problem but found no description matching.
Thanks in advance.
Edited by: ezra-s on 05-mar-2012 13:10

Have latest updates for mac and iPhoto. several of "events" now show as grey squares with a plan tree, no thumbnails when scrolling over as before. Photos show when clicking on icon but not visible as a group. What gives?

Have the latest updates on my iMac and iphoto. Recently several "Event" folders have turned to grey with a palm tree in the corner. Before there was a "key" photo to help identify the event. The event title is still at the bottom of the square but no key photo. When i click on the icon, the photos that it contained show up, but when closed again disappear. How do I correct this annoyance?
Also: One event that contains about 12 photos has a problem---some of the photos when clicked will enlarge and show individually on the screen and print out, while others when clicken on show a black background with an exclamation mark and will not print. Thoughts?

Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
LN

Data doesnt show when report is run but shows in preview mode or exported to PDF

Similar Messages

Maybe you are looking for