Data DVD Does Not Mount

I burned some quick time movies onto a DVD today using the Super Drive on my Intel Core 2 Duo iMac. I then attempted to load the DVD on my Macbook. It would not load and Disc Utility does not see the disc either. I have restarted numerous times. I have tested movie DVDs and CDs and both work just fine. I have also tested the newly made DVD on an iBook where it loads just fine.
Is there anything I am missing? The new Super Drive update does not apply to this computer as I cannot burn DVDs.
Any suggestions or help would be great.
Debbie

did you do the superdrive updater on the macbook that had that problem?
are the media you using is dual layer media that might have incompatibility problem with combodrive?
Try to burn with other brand or media (sinle layer, dvd-r and or dvd+r).
Try to test that dvd with other mac that has combodrive (I think your ibook does have that).
If this problem persist, consult with apple or visit nearest apple store and bring along your burned disk and your other mac.
Good Luck.

Similar Messages

Mac OS X Installation DVD does not mount.

Hi, I was trying to perform a disk repair but my imac keeps spitting the installation dvd out. It is not mounting. How can i sort this? Please, anyone!

Another help source (if you haven't already done so).
Go to your OS Help Menu. In the search field type dvd
Click on all the troubleshooting topics & Support Articles that pertain to your issue.
You can also do the same in Disk Utility. Open same up.
At the bottom left of the window, click on the purple button w/the "?" in the middle.
This will bring up the Help Menu.
===============
Your drive may need cleaning. Cleaning kits can be purchased from any store that sells CD/DVDs.
===============
If your system DVDs still do not work, you can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number. Here's a list of links to all of those - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html Another resource: International Support Phone #s.

CS4 Install DVD does not mount on Macbook Pro after Maverick upgrade

I upgraded a Macbook Pro to Maverick from Snow Leopard. I want to install CS4 but when I put the DVD in the Superdrive, it spins and spins and eventually says that the DVD is blank. I have successfully mounted other DVD's so I don't think it is a drive problem. I have also tried the DVD in a newer model Macbook Pro and it mounts successfully. Does anyone have any idea what is causing the problem. More important, is there a different method I can use to install CS4?

I am not saying that the CS4 applications will not work but Adobe has never tested All CS4 applications on MAC Maverick. It might or might not work.
http://helpx.adobe.com/creative-suite/kb/system-requirements-cs4-point-products.html
But yes if that works, its good. I just wanted to keep you updated in case in future if the application gives you any issue with the performance.
Help Articles:
http://helpx.adobe.com/x-productkb/global/mac-os-mavericks-compatability.html
Files open, save slowly | Mac OS X

Home DVD goes in, spins, does not mount, and then ejects. It does play on an old Windows PC.

Hi. I have a MacBook and I am able to play purchased DVDs just fine. However when I try to play the home DVDs my brother burned for me on his new MacBook Pro it doesn't work. The DVD goes in, spins, does not mount, and then ejects. It plays on an old Windows PC though. Very strange. Help!

I know your frustration, so happy I still own a PC just so I can burn any DVD I might still need!
I was told at the Apple store to go buy an external l0l
How awesome is THAT ...Yah you just paid an INSANE amount of cash for a CRAP laptop so now go out and spend MORE money on getting an external DVD burner so your expensive laptop can burn/play DVD's
YAY APPLE... wtg at putting out a quality product!
PS so fantastic to see all the responses to your cry for HELP here!

Ipod does not mount onto Mac OSX

My click wheel Ipod does not mount to my desktop nor to my Itunes. I tried resetting it but I cannot restore it because it does not mount. I also cannot open up the Ipod Update software file, it tries to open with Appleworks, then stops.

I have fixed my iPod blank/black screen problem (i suspect black screen for iPod5G black model, and white screen for the white model) On Black Friday, which was yesterday, after I upgraded the newest releases on QT/iTunes602/osx1044/iPod11, iPod didnt do anything, no mounting to my iBook/iMac/G5PwrMac. Hard reset didnt work, etc.
I decided to fix the iMac permission with local drive DiskUtility, then reboot the iMac with the Original Tiger iMac DVD software restor disc which comes with the desktop then repair the volume with this method. Then I reboot and then I did an extended hardware test with the same disc, but with the Hardware test disk (which is the same as software restore DVD, iinstead of holding down the c key, hold down the option key when reboot with the disc)
After all that, iMac restarted and recognize my 5G iPod 60GB, I quickly restore the whole iPod to manufacture setting, hopefully you have all the info backed up somewhere, I did a clean defractmentation, and then used the iPodUpdater from 11-17-2005 to restore the iPod 1.0 version.
Now I am done and my iPod works like new. Go try it guys... Good luck!

Update 10.5.6: external HD used for Time Machine does not MOUNT anymore

I've used this LaCie external Little Big Disk since November 2007 with Time Machine, without problems. Recently, after updating to OS 10.5.6, the disk does not mount anymore when connected by FireWire800. Same result when using FW400 and USB.
The disk shows up in the System Profiler under FireWire. When I run analysis with a program 'Data Rescue II', it also sees the disk.
Main issue: disk does not mount anymore. So no more TM backups possible.
Although the disk also shows up in Disk Utilities, I can't partition or reformat it. I ran the LaCie Update Tool 2.0.1 and it says firmware is up-to-date.
I also reinstalled the Combo Update 10.5.6 without result. Also did all the forum recommendations such as resetting PRAM and using Terminal to 'mount /dev/xxx'. Does not help.
I feel this is an Apple issue.

Yes, did it three times. Also already hooked up in daisy chain, and yes, also connected to another Mac (also 10.5.6). Same result. I think it's an OS 10.5.6 issue, because it happened after the update and I had never problems in the last year using this disk with TM (it's not full either). I hope it's not, however, but I am afraid it is. Also I've posted the issue at LaCie support and see what they answer.
Thank you for your reply.

My external HD does not mount despite it appears on Disk Utility

I have been using an external HD to keep my video library. Just this week I updated my library and everything was OK, but when I tried to see the videos on my mediaplayer the disk didn't appear. I connected it again to my iMac but now the external HD does not mount. I tried Disk Utility, the disk appear gray on the sidebar but it doesn't mount. I run Repair but I get the b-tree node size error and the disk still does not mount.
Please help!!!!

If DiskWarrior can't fix it, you might try Data Rescue II...
http://www.alsoft.com/DiskWarrior/
http://www.prosofteng.com/products/data_rescue.php
(Has a Free Demo to see if it could or not, but you'll need another drive to recover to).
Or FileSalvage...
http://www.subrosasoft.com/OSXSoftware/index.php?%20mainpage=product_info&productsid=1
to recover what you can.

XServe RAID volume does not mount

Without any modification to the system, a panic log from our XServe indicates:
"Thu Jan 18 17:28:58 2007
panic(cpu 0): HFS: corrupt VH on PBSRaid1, sig 0x4100, ver 0, blksize 0"
The volume PBSRaid1 does not mount anyway from that date.
Diskutil reports:
"Verifying volume “disk2s3”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Invalid extent entry
The volume PBSRaid1 needs to be repaired.
Volume check failed."
DiskUtil is unable to repair the volume.
My configuration is:
XServe bi-G3 1GHz, MacOSX Server 10.3.9
XServe RAID with 5 disks RAID5 on the left side (OK) and 4 disks RAID5 on the right side (the bad volume)
All the controls are "green" and nothing wrong appeared in the events log obtained via RAID ADmin.
Any suggestion to repair are welcome, as we have many data from confocal microscopy on that volume.
Thanks
Jean-Pierre
XServe bi G3-1GHz (oct 2003)+ XServe RAID Mac OS X (10.3.9)

Right, Dave.
DW 4 rebuilt a preview folder which contains all the files in correctly named folders.Only 3 files among thousands has been saved in a Rescue folder !
It also restored the right volume label, lost in DiskUtil, fsck, pdisk and others.
Very nice tool.
While DW was building its preview, the disk 9 lighted red and a lot of failures of the controler 2 appear in the events log of the XServe RAID.
At this time, the RAID is rebuilding with our spare disk.
I think we have to change both the disk 9 and the controler 2 despite it lights green currently.
Jean-Pierre
XServe RAID (2003- 5xIBM 180Go RAID 5) +(2005 -4xHitachi 250Go RAID5) Mac OS X (10.3.9)

Burned DVD will not mount correctly

I have burned a dvd on my macpro and everything completed correctly. However, when I put the disc back into the drive, it does not mount correctly. The title I gave to the disc not there (it mounts as "Untitled.fpbf") and no files appear.
Ironically, I can put the DVD into another mac or pc and the title and files are on the disc.
Is there a cache file i need to delete?

The key to this little mystery is in the ".fpbf" which is evidently the designation for a Finder Backup Burnable Archive file. From what little research I've done (never had the problem myself) it's not clear how the suffix gets attached, but it has become a popular topic lately. Googling .fpbf will get you started and with any luck this post will bump you to the top of the list and get you someone with more specific info.
good luck

Visual Composer 7.0: system (data source) does not appear

Hi...
There is a problem: system (data source) does not appear in Visual Composer 7.0
1. There is a connector MDM. It is made by PCD. It has been tested. The test is ok.
2. However, as the data source in Visual Composer a connector MDM does not appear.
3. This problem affects all types of connectors, but the Web Service Connector. Connector Web Service is always there.
What the .....?
P.S. The role of the creator of the connector is the same user of Visual Composer
Thanks...

Hi...
There is a problem: system (data source) does not appear in Visual Composer 7.0
1. There is a connector MDM. It is made by PCD. It has been tested. The test is ok.
2. However, as the data source in Visual Composer a connector MDM does not appear.
3. This problem affects all types of connectors, but the Web Service Connector. Connector Web Service is always there.
What the .....?
P.S. The role of the creator of the connector is the same user of Visual Composer
Thanks...

Ipod (3rd gen.) does not mount to iTunes

My ipod (3rd gen.) does not mount on iTunes (using a Mac). When plugged in, it appears on my desktop as if it were a jump drive.
I was planning on re-formatting it with Disk Utility but I'm not sure if this is a good idea. I also realised that the Format is listed as Windows NT File System (NTFS) when I have the disk utility window open. If I need to format with Disk Utility, what format option should i choose? (i.e. Mac OS Exteneded (Journaled), Mac OS Extended etc.)
Thanks in advance!!!

Now when I connect the Ipod to my Mac, it mounts as a Device on iTunes. I want to sync only a few items from my library onto this iPod - when I attempt to do this (by either adding the specific music to the "music" section on the iPod or creating a playlist and using Autofill to fill the iPod), the iPod says that it has Synced but when I disconnect the iPod, there is no music on it. Why?

Getting error when view - Requested data type does not match with existing

I have the siebel web service
In the BI publisher as mentioned in the 'Siebel_BI_Publisher_Integration_Concepts.pdf', I have imported the siebel web service
BI can recognize the 'Web service' and methods.
I have created the paramters. The data type is 'String'
When I try to view the report using the BI publisher, I am getting teh following error in th UI
"Requested data type does not match with existing data type"
This is the first time I am using BI publisher to call the Siebel web service. I don't know what this error means
I don't know whether any log file generated wit the details of this erro message
Any help is much appriciated
Thanks,
Kavitha

Hi all,
have you find a fix for this issue? Im facing the same situation, using Complex type, and String data type both in the service and Bi publisher. We are consuming CC&B services, and we have noticed this error appears when BIPublisher is running on WebLogic (10.3) but it does not appear when BIPublisher is running on OC4J , of course running the same report on both application servers.
Any idea?
Thanks a lot, regards
Nestor

Windows 8.1 Setup DVD does not see SSD

Windows 8.1 Enterprise x64 Setup DVD does not see Samsung SSD 840 Pro so cannot install Windows 8.1. The same SSD disk currently does have Windows 8 Enterprise and runs fine on the same laptop. Checked the Dell BIOS does see the SSD. Loaded the
latest drivers from the Dell website but did not help. Tried changing the BIOS settings from SSD to ACHI. When in setup did the SHIFT+F10 to run the DISKPART clean the partitions.
How do I troubleshoot why the Windows 8.1 Enterprise setup disc cannot see the SSD?

Hi,
According to your description, I would like to confirm if you can see SSD under the Diskpart.
If you can see the SSD under the Diskpart,I think it is related to the installation DVD.
I suggest we use a new installation DVD to test it.
Also, you can create a bootable USB flash drive, and then use the USB flash drive to install Windows.
Keep post.
Regards,
Kelvin hsu
TechNet Community Support

We have a DVD in the super drive that will not eject. The DVD does not show up on the desktop. Have tried the keyboard eject button, and also restarting the computer. Any ideas on how to eject it?

We have a DVD in the super drive on our Macbook Pro that will not eject. The DVD does not show up on the desktop. Have tried the keyboard eject button, and also restarting the computer. Any ideas on how to eject it?

here is a troubleshooting article from Apple about this: http://support.apple.com/kb/ht2801. Hope this helps

External Hard Drive does not mount

My 2TB external hard drive does not mount and I cannot get it to. Have tried turning the hard drive off and then back on. No response. Any thoughts as to how I can get it to be recognized?

You can try doing a SMC reset, if it doesn't work the first time it's totally OK to reset the SMC several times.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Data DVD Does Not Mount

Similar Messages

Maybe you are looking for