Data DVDs not reading correctly

For a while, I had been backing up data to DVDs, and I had never experienced issues retrieving the data from those DVDs later. However, now, when I try to retrieve data from DVDs, some files will copy correctly, while others will receive an error saying something along the lines of "incorrect permissions." I've attempted to repair disk permissions before, to no avail. I suspect this isn't due to the actual burning of the discs, because discs I haven't burned experience the same errors. (For example, I can no longer install Command and Conquer 3 because the installation process -- drag and drop -- fails with the same error as before).
Is there any history of this occuring? And if so, is there a solution, or do I need to get a new disc drive? Many of the files I can't retrieve are relatively important, and since most Apple-supported games are installed via drag-n-drop, I worry Command and Conquer 3 will be the last game I ever buy unless I get this fixed.

Hi Naresh,
First Compare the data in the RSA3 with the source tcode MCRE for the field WithDrawl qty against the Plant.
Thx
Edited by: satya prasad on May 21, 2010 7:17 AM

Similar Messages

Data DVD Not Reading On PC

Hi:
I'm preparing to send off pics I took and imported into iPhoto. I then exported them to a folder, and since there are more than will fit onto a CD, used Toast Titanium 7.0.1 to burn a data DVD with the Mac & PC format tab selected. The DVD will either not show up in one PC I tested on, or on the other it says the files are unreadable. Any suggestions TIA.

Did Toast compress them in order to fit them all on a single DVD? You might try using the Finder to burn the disk and use multiple disks to do the job. I've never had any problems with my burned data disks and PCs.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.≤br>
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

DVD not read correctly: Medieval 2 will not start anymore (original disc)

Hi everyone, sorry if i am posting this in the wrong part of the website but i really need help with something. I bought a new pc game ( Medieval 2 Total War ) and when i 1st installed it, it worked fine. The day after i went to play it again and when i clicked on the icon the DVD Drive started and the disc was being read. The problem was though an Error message came up saying that i needed to insert the right disc when it clearly stated on the manual disc 1 was to kept in the drive. Can anyone tell me why it was working 1 minute then the next saying that my disc does not exist please? I tried to reinstall it and everything but the same message appears over and over. Any suggestions please?
Thanks in Advanced
David

Hello David
It will be interesting to know which notebook model you have.
By the way: try to disable packet writing software DLA. Maybe it helps.
The procedure of changing a setup of DLA is as follows:
1. Open Windows Explorer
2. Right-click the icon of the CD/DVD drive and choose Properties
3. Click the DLA tab
4. To disable DLA option clear the Enable DLA on your drives checkbox
Please let me know if this works.

Date filter not reading dates correctly

I've noticed that since Bridge CS5 came out, the filter on date is not working correctly. For example,I'm looking at a series of images that I captured today (Sept 7th), and the date shown in the metadata panel of Bridge ays "Today". Yet, the Filter pane shows only "yesterday", not "today" as an option. When I click on "yesterday", Bridge displays the files that I took today! (And for the record, I'm using Bridge on Sept 7th, at 6 PM Pacific time when I'm posting this.)

Sorry, hope you can read the details...
Thanks, screenshot is clear, I see it but can't believe my eyes I'm
afraid....
Tried to reproduce it on my system but can't achieve this, pictures shot at
same day as 'today' give today in the filter panel and yesterday also
correctly filtered.
You have of course already checked the date and time of your camera?
But that should reflect also the data in the EXIF shown under file
properties in the Metadata section.
Assuming you have already tried to reset the Bridge Preferences (holding
down option key while restarting Bridge) you could also repeat this after
having manual deleted the AdobeBridge4.plist file from the preference folder
in the User library.
If still no luck, a way to narrow the possibilities down is if you have CS4
still installed you could try it in Bridge CS4 with the same files.
If it shows correct in CS4 it might be related to your CS5 install or to
NEF from D200 and Bridge CS5.
If it shows also incorrect in CS4 it might be related with your User account
or OSX.

Video portion of Nightwish DVD not playing correctly on Quicktime. It is not a smooth playback. Can I correct this?

Video portion of Nightwish DVD not playing correctly on Quicktime. It is not a smooth playback. A little jerky. Is there an easy slution to the problem?

I worded my question incorrectly. It isn't a DVD I'm having the problem with, it' s a Nightwish concert download form iTunes I am having the video portion of the video that plays not smoothy. Like it is moothing it short little segments, not a steady flow!

Data dvd not recognized

Hi
Wonder if anyone can help...
I have recently had a show-reel put together and they have sent me a copy on a data dvd with AVI and MOV files on it. This is so I can burn it and upload it to websites etc.
When I load the disk it doesn't seem to be recognized. There is no icon on the desk top but The iDVD application does automatically open up though, however I can't find the files anywhere.
I have looked in disk utilities and the disk is listed but it wont let me verify it.
Does anyone have any ideas about why this might be and what I can do it about it.
I want to try and burn a couple of copies so any help would be great.
Thanks

Thanks for confirming that Import is correct.
When you say the Capture Scratch folders only hold captured material, does that include Imported material? And if so, when I look in the Capture Scratch folder and see not QT files (as I have seen in the handful of previous projects I have attempted) but small "FCE document files" then I do have some kind of problem, right? I'm just trying to figure out where to start in understanding this, and it seemed to me the external hard drive source was the new variable here; that maybe there was something I had missed in terms of what was required when using the XHD as a source instead of my own camera capture. If that is not the case-- that is, if a QT file is the same whether brought to the system through Capture or found on an HD and imported-- then I have to figure out what I did to screw up the Capture Scratch function. I have not done any render effects. I'm just setting up. I've not done much of this and none at all recently, so operator error is certainly possible. I'll reproduce the export and see if I can refine the settings. Thanks for your patience and thoughtful assistance.

Date can not display correctly in excel from .jsp

Hi,
I create a .jsp report to export the data to excel. the report run OK, except the date field can not display correctly.
for example in database :start date ='01-oct-2003'
in the except it displays to 02/06/02.
It seem all the date field can not be control in the report, and control by somthing else
Doese anyone come accross this problem?
Thanks

Hi Rong,
Are you using the following demonstration to build your JSP?
http://otn.oracle.com/products/reports/htdocs/getstart/demonstrations/index.html
(Output to Excel with Oracle9i Report)
I tried to do the same, and inserted a database date field in the JSP using Reports. I found the following:
While making the template inside Excel, if I make sure that the format of the date cells is "Date" - some particular date format, the date field values from Reports does not get exported correctly.
However, if you make sure that inside the template, the format of the date cells is not date, but "General", then the date field values are correctly exported to Excel.
Pl try it and let us know.
Navneet.

Files copied from UDF data dvd are Read-only

I have a bunch on data DVDs burnt on a pc using Roxio Easy Media Creator 7. These disks are UDF format and can be read perfectly on pc or mac. The problem is : if I copy a file to my desktop, it becomes owned by me but r-xr-xr-x. It's not a problem for me personally but other users I support have a hard time figuring what's wrong when they can't rename the file they just copied.
Is it normal behavior or am I the only one with this problem ? I was supprised not to find anything in apple forum about this.
The work around is to change permissions to read-write in the getinfo window + apply to included elements + password or use chmod but it's not how I'd expect it to work. And I don't know how to modify the default permissions given to files from an UDF dvd. Copies of files from iso9660 disks are read-write.
3 PM G5s and 2 G4s Mac OS X (10.4.9)

I don't believe this is a problem of leopard in general. i can not reproduce this behavior with any of my afp shares. no matter how i connect (as an owner or as a guest) after I copy something to the desktop it gets standard 644 (not 600) permissions.

Trimmed Quicktime Time code Media Files not reading correctly in CS5+ (works in CS4).

I'm using Prores footage with metadata Timecode inserted into the Quicktime file. Then I edit the Quicktime file, click "Save" and then import the trimmed file into APP CS4. CS4 recognizes the edited clip and displays the timecode correctly (adhearing to the trims made on the file with Quicktime).
BUT, in CS5, when I use the SAME clips, the timecode displays what the untrimmed timecode on the trimmed image. So now, my timecode is OFF.
Really want to figure out how to fix this. Does CS6 fix this issue? Is there a preference or custom setting I need to select in order to have CS5 adhere to the metadata stored in the Quicktime file's timcode information?
Any help would be greatly appreciated!

There is a difference between Save and Save As in QuickTime Player. When you Save after trimming, the trimmed data remains in the file and takes up the same amount of space as before. When you Save As, the trimmed data is not included and you end up with a smaller file.
I don't know why CS5 is behaving differently but it's more efficient to Save As and it will solve the CS5 problem too.

APO Demand plan monthly data is not assigned correctly after replication to HANA

Hi All,
We are replicating the APO live-cache toHANA using a APO Data Replication Model. Replication of Planning Data - SAP HANA Live for SAP SCM -
Replication of the Planning Book to HANA is working for weekly data. Weeks in HANA reconcile correctly back to the APO Planning Book. However months are not being correctly assigned to the data. All data for each week is being assigned to only one month in HANA.
When tested by extraction to a BW cube/DSO first then DSO replicated to HANA the data is correctly assigned to months and weeks. There is something different which is happening in the replication of the APO Replication Model that is not correctly assigning the months.
Has anyone had this problem before?
Thanks,
Steve.

Reading that, it has not improved and its May 2014.
Dave Baker | AIDE for LightSwitch | Xpert360 blog | twitter : @xpert360 | Xpert360 website | Opinions are my own. For better forums, remember to mark posts as helpful/answer.

Data DVD not recognised

I burnt my images on my old PC on a DVD, marking it as a data DVD and making it presumably compatible with other systems. It can be read by other PC's, but not by my new MacBook. It marks it as an unburnt CD!!
It reads CDs & DVDs just fine.
Please, if you have any ideas...
MacBook Pro 15" @2.1GHz Mac OS X (10.4.7)

Sonic is the name of the company (they bought Roxio), not the application. But anyway, I have Sonic DigitalMedia Plus on my Dell and I see an option to burn as Data > "Direct to disc" which would indicate it is probably using packet writing (similar to writing to a floppy or DVD-RAM), then they have the option to click "Make compatible" in order to share the disc. Maybe you didn't click that? If your other PC's also have the same burning software, they would be able to read it even without making it "compatible". Or make sure you are clicking on "Data Disc" instead when creating new discs.
Let me know how you made out.

Not reading correctly?

I just got a 4th Gen Nano for Christmas, etc.
I have another video Nano registered to my computer and don't have a problem with it. However, when I plug this new iPod into the USB to register it, nothing happens except a window pops up with the folders/contents of my E: Drive. Apparently it's not reading it correctly, but how can I fix this so I can use my new iPod?
I have the current version of iTunes installed and I'm running on Windows XP.

The problem has something to do with "iPodService Module has encountered a problem and needs to close". I read another thread somewhere about it, but their problem seemed to be stemming from Norton. I'm using avast! antivirus.
I've tried uninstalling/reinstalling iTunes.
I still had no idea what's wrong. .-.

Data is not loaded correctly

Hi,
i have loaded data to cube.But when i check the WithDRAW Qty field ,I found Its is not correct with source tcode.
i think ,some of the records are missed.
My source tcode.is MCRE.
Cube 0PP_C06.
i found that data is not matching for one plant only.,for the remaing plants ,data i.e WithDrawl qty is comming correct.
Can you please tell how should i find which records are missing
Regards
Naresh

Hi Naresh,
First Compare the data in the RSA3 with the source tcode MCRE for the field WithDrawl qty against the Plant.
Thx
Edited by: satya prasad on May 21, 2010 7:17 AM

D20 memory not reading correctly. Bios sees only 20 gigs lenovo diagnostic sees 24 gigs

Ok i have a d20 with one set of dimms not reading in the bios. I have tried using all combinations and it always disables one channel of one CPU not reading in the bios but if I use the lenovo diagonstic it sees all the memory and can also run the quick memory test with no errors. I would really like to get all of the slots to work anyone got an answer for this. Thanks for you help in advance.
Mike

I'm assuming you're following the correct DIMM install order based on the service label on the inside cover? The DIMM numbering is non-standard with regards to the location.
If you think you've narrowed it down to a specific DIMM slot (or pair of DIMM slots), I'd try booting the system with memory ONLY installed in that slot (or slots). Obviously it's not the recommended fill order or anything, but it could be a good test to see if you possibly have a damaged slot or something.
Also, have you been messing with the CPUs at all? Though unlikely, I would guess it's possible that a specific CPU pin in the socket could be damaged as well.

Recordmode data are not updated correctly

We currently have an issue while using the 3.x data flow in BI 7.0. The same also holds with 3.x versions of BI.
Suppose you have an ODS sending data in an InfoCube. When you initialize the delta process with data transfer then the recordmode field in the communication structure contains null values even though in the change log table of the ODS it has values. This behaviour does not hold when you send further data with deltas.
We want the recordmode data to be updated correctly since we use them in a condition. Does anybody know about this problem?
Best regards
Theodoros

Hi again,
the problem is also not related with any kind of mapping. We are just sending some data from an DSO to an InfoCube. Recordmode values are maintained correctly in the change log table of the DSO. Nevertheless, they are not updated correctly in the InfoCube's update rules communication structure unless we are uploading deltas. My question is why they are not updated also correctly when we are doing an initialization of the delta with data transfer.
Thanks anyway
Theodoros

Data DVDs not reading correctly

Similar Messages

Maybe you are looking for