Data element for time in 12 hour format HH:MM

Hi friends,
Is there any data element which is for HH:MM format 12 hour format?
i see uzeit, but its HH:MM:SS. i dont want this.
i want HH:MM.
Niraja

Rohan,
I am trying to create a new Domain with data type Tims. Basically when i change the no. character to 4.. its not taking
by default its making it as 6. How to make this to 4.
i can give Numc, but i needed in HH:MM format.  with : in between.
can u help me out.
Niraja

Similar Messages

  • Is there a data element for time unit (Hour, minute, second) and so forth)

    Thanks for your help.

    Hi Raja,
    I just want to add something in the drop down list
    'Hour'
    'Minute'
    'Second'
    I hope I can get these values from a domain value range.
    Could you please assist ?
    Anders

  • Data element for mm.yyyy

    Hello Experts,
    Is there any data element for a field with the format mm.yyyy .
    I need to place this field in the selection screen and i want to have an F4 help too.
    It will be better if i am provided with the database table name too.
    Please help.  Useful answer will be rewarded.
    Regards,
    Vijayalakshmi

    Hi ,
    Data element for a field with the format mm.yyyy is FTI_MONTH_YEAR.
    You can use this in selection screen as:
    selection-screen begin of block b1 with frame.
    parameters:p_date TYPE fti_month_year.
    selection-screen end of block b1.
    Regards,
    Shanmugapriya
    **Reward if u find helpful

  • Change GMT time and 12 hours format in the Callback Properties dialog box

    Hello! There are CAD 7.6.3 for UCCE. In the Callback Properties dialog box for personal CallBack displays the Customer's Current Time in GMT 0 and the data format of 12 hours.
    How to display in this window, the time is GMT +3 and change time in 24-hours format?

    Hi,
    Please check your local time format settings by the following steps:
    1. Click the Time in the right bottom corner taskbar.
    2. Click Change date and time settings.
    3. In Date and Time window, click Change data and time.
    4. In Date and Time Settings window, click Change calendar settings.
    5. In Customize Format window, switch to Time tab.
    6. Change the Short time format as H:mm instead of h:mm tt, set the Long time as H:mm:ss.
    7. Click OK to save the setting to have a try.
    Regards,
    Winnie Liang
    TechNet Community Support

  • How to add a new data element for existing table filed(Primary key field)

    Hi Experts,
    How to add a new data element for existing table field(Primary key field)
    For this filed ther is no foreign key relation ships and even check table.
    while activating table it is giving message like below.
    can you help any one to solve this and wil steps to add new dataelement for existing primary key filed of a table.
    Check table (NAMING SPACE/TABLE NAME(EX:/TC/VENDOR)) (username/19.02.10/03:29)           
    Primary key change not permitted for value table /TC/VENDOR
    Check on table  /TC/VENDOR resulted in errors              
    Thanks
    Ravi

    Hi,
    Easiest way is to download the table eg into an Excel table (if possible) or text table. Drop the table from the database. Build your table with the new key field. Build the database table again and fill it.
    You can do it also over the database into a new table. Drop the old one. Build the enhanced one and fill it. Afterwards drop your (temporary) table.
    Maybe there are other ways, but this works.
    Success,
    Rob

  • Data elements for IDoc Segments to non-SAP system

    Hi,
    I need to create IDocs for transferring data to non-SAP system. When I create segmet fields should I create new data elements for all the fields with attributes specific to receiving system? Because there are many fields where the field attributes of SAP system do not match the corresponding fields of receiving non-SAP system.
    Thanks in advance!!
    Regards,
    Sriram

    Hi Sriram,
    When I create segmet fields should I create new data elements for all the fields with attributes specific to receiving system
    Is it custom  segments .
    Regards,
    Madhu.

  • Data Element for No.Containers(GR Quantity tab)- QANZGEB

    Hi All,
    We are planning to reduce the decimal length from 3 to 1 in Data Element for No.Containers(GR Quantity tab)- QANZGEB field , while doing GR in ECC 6.0 , So that if we receive 1000 containers , we can enter.
    We want to Know , what will be the implication in the system, do you recommend or what is the other alternative and what step we need to take after the modification.
    Thanks & Regards,

    Hi,
    did you finally try it ? I would need also...
    thanks

  • Error: Data element for InfoObject AUFNR 0PM_ORDER could not be created(QA)

    Hi Experts,
    I am trying to Transport a request from DEV to QA,which consists Transaction Infosources,  afetr the inport the TR is failed with return code 8. and the error message in the log is as follows.....
    Error when determining a number from object BI_TSDTEL and number 01  
    Object name can only contain characters from syntactical character set
    Data element for InfoObject AUFNR 0PM_ORDER could not be created
    Data element for InfoObject KOKRS 0CO_AREA could not be created
    Data element for InfoObject KOKRS 0CO_AREA could not be created
    Errors occurred during post-handling RS_AFTER_IMPORT for ISCS L
    Data element for InfoObject TXTMD could not be created
    Errors occurred during post-handling RS_AFTER_IMPORT for IOBJ L
    please Could anyone give the Inputs to solve this , I'll be greatful to you.
    Thanks & regards
    SK

    hello AJ,
    Till now the problem is not solved , Please provide some inputs.
    here I'm getting this problem for TXTMD, 0CO_AREA, 0PM_ORDER, 0DATE, 0PLANT, 0ORDER_CURR, 0LOC_CURRCY
    Error when determining a number from object BI_TSDTEL and number 01
    Object name can only contain characters from syntactical character set
    Object name can only contain characters from syntactical character set
    Data element for InfoObject KOKRS 0CO_AREA could not be created
    Data element for InfoObject KOKRS 0CO_AREA could not be created
    Transfer structure 0CO_OM_NTW_1_SB activated under the name 0CO_OM_NTW_1_SA
    It is not necessary to copy dependent objects for transfer structure 0CO_OM_NTW_1_SA
    Data element for InfoObject KOKRS 0CO_AREA could not be created
    Activating Transfer Rules 0CO_OM_NTW_1_SA ...
    23 Transfer Rule(s) of the transfer structure 0CO_OM_NTW_1_SA removed from control table
    23 InfoObject(s) of the transfer structure 0CO_OM_NTW_1_SA removed from control table
    Formulas have been saved
    PLEASE PROVIDE SOME INPUTS.........
    Message was edited by:
            S K

  • How do I enter time data in A cell in 24-hour format?

    Since I work in 24-hour time format, I want to enter time data in a cell in same format. I know how to display 24-hour format, but data entry is allowed only in 12-hour (am /pm) format. Kindly throw some light. Thanks !

    1) select the cell(s) you want formatted as 24 hour times
    2) Open the cell inspector (top right of your windows usually)
    3) Change the Cell format to "Data and Time"
    4) Change the "Date" to "None"
    5) Change the "Time" to "19:08" (the 24-hour formatter)

  • What is the data type for time and what to insert

    Hi there
    i had two attributes in a table called start_time and end_time and i want to insert time into these attrbutes e.g 10:00 and 11:00
    How do i do that
    what is oracle's built-in type for time???
    adn how do i insert values in the table(i.e the format)
    thanks

    There is not Oracle type that has just a time. The DATE and TIMESTAMP data types include both the date and the time (TIMESTAMP has millisecond resolution and has optional timezone support). If what you're really interested is a time interval (i.e. 1 hour), there are some INTERVAL data types.
    You have a lot of options for how to specify dates and timestamps along with format masks.
    Justin
    Distributed Database Consulting, Inc.
    http://www.ddbcinc.com/askDDBC

  • Data element for Month and Year

    Hello All,
    Is there any data element which will have only Month and Year.
    I have to introduce this field in a table. It should have convesion exits also.
    Ex: If i give 092009, it sould come like 09.2009
    Thank you.
    Best Regards,
    Sasidhar Reddy Matli.

    Kindly Try this code for Month and year as input and having standard F4 help..
    INCLUDE RMCS0F0M.
    TYPES : BEGIN OF TY_SELECT,
              MONTH TYPE FTI_MONTH_YEAR,
            END OF TY_SELECT.
    DATA : WA_SELECT TYPE TY_SELECT.
    SELECTION-SCREEN : BEGIN OF BLOCK SANDEEP WITH FRAME.
      SELECT-OPTIONS : S_MONTH FOR WA_SELECT-MONTH OBLIGATORY NO INTERVALS NO-EXTENSION.
    SELECTION-SCREEN : END OF BLOCK SANDEEP.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_MONTH-LOW.
      PERFORM MONAT_F4.
    SANDEEP JAIN

  • Difference between two times in 24 hours format

    need function module for passing two times of 24 hours format

    Hi,
    try this Function Module : SD_CALC_DURATION_FROM_DATETIME
    assign points if helpful
    Thanks
    Prashanth

  • Data element for new column

    Hi All
    I have to add one column in exisitng custom table. the new column is SRFLAG which will contain value Y or N.
    Can any one suggest me what will be data element? I want to use existing data element?
    please suggest existing table also in which it is used?

    Hi Dude,
    I will tell u a way to find the answer on your own.
    Go to SE11,choose DATA TYPE radio and press F4.
    Press Search for Data elements.
    Enter a relevant short desc., with asterisk.
    For eg., yesno*
    Then  enter the Data Type as 'char' and Length as 1 and press continue.
    A list appears containing the relevant DEs.From there choose
    the required one.
    Change your search options and try till you get the required one.
    To find the Table enter the name of the DE in the Data Type field and choose the where-used list icon.
    <REMOVED BY MODERATOR>
    Regards,
    Lakshmanan
    Edited by: Alvaro Tejada Galindo on Feb 14, 2008 11:26 AM

  • Installing 10.4.8 on MacBook takes a long time, 1.5 hours formatted...

    Apple gave me my PowerBook G4 12" when I was working there and it took less than 30 minutes to format and install and the new one I just bought takes 1.5 hours. All my certified Mac friends still at Apple say I should get a new install DVD set. I may be calling but any other ideas? Tech Tool that came with my Apple Care says everything is fine, but something is a miss.
    Thank you.

    Oh, ya, it was a quick format....took a long time formatting, trust me I know about zero'ing the data. The quick format took like 10 minutes, a full install on the formatted drive took about 70 min, 1.5 hours total. I was amazed, but thought if it works, it is worth it. No go. Called Apple on my lunch break and in 5 business days they will send out new install DVD's. I'll cross my fingers. So far I have used Apple's HW Test CD like the Apple loyalist that I am, then DiskWarrior, then techtool, all give it a clean bill of health. I'm very literate on Mac's and love them so, but I have a ton of application launch failures, which is why I formatted it, no change when it was a clean install (quick format) and if the HW is fine as I trust it with 3 tools telling me the same thing, it has to be my build of the OS. Theing is, this is the MacBook Intel Core 2 Duo, and my OS build is not on Apples spec page showing the possible builds that come with the OS. I find this strange. Guess I'll back up and format when I get the DVD's and cross my fingers. First I will try the archive and install and hope it works and pray it is the correct build that Apples web page shows, but any different build I think will do the trick, unless the DVD's are just jank.
    ThanX all, message me in a week and I'll tell you if interested.
    Kevin
    http://www.theTechShack.com

  • MD04 MRP Data Element for Production Order add Order Status

    Hi,
    Currently in MD04 when you create a production order it gives the status in MRP Element Data as 000001138145/YP01/ and once I release this is shows the following status 000001138145/YP01/Re
    I want to bring another status in how can you do this?
    Thanks
    Adeel Sarwar

    Dear,
    It is not possible in standard SAP to display the Lock production order as status 'Locked' are taking into consideration with regard to availability relevance in the MRP. MD04 display only those MRP element which are relevent for MRP calculation.
    So better check this order in COOIS with LCK (Locked Status).
    Hope clear to you.
    Regards,
    R.Brahmankar

Maybe you are looking for