Data Encryption after Migration

Hi,
I have recently upgraded a single server deployment of on-premise MSCRM 2011 to MSCRM 2013. Data Encryption NOT enabled yet. Then have migrated this upgraded MSCRM 2013 to another server. During migration, ignored the warning message for Data Encryption.
Now, after the organization import, it does NOT allow me to activate data-encryption and gives the following error message:-
"Cannot perform 'activate' because the encryption key doesn’t match the original encryption key that was used to encrypt the data."
-This is quite surprising that data encryption was NOT previously activated, but still giving the above said error message.
Kindly advise.
Thanks in Advance,
Ajay
\Ajay

Thanks for you reply Jithesh,
I did not use XML configuration to do the install.
In my case the data encryption key was NOT mentioned and data encryption was Never enabled on the source CRM server before data migration.
Now after the organization import, I have configured HTTPS on the new server and am trying to put the encryption key, where it is giving me the error.
Any guess, why this error when encryption is NOT yet enabled?
Thanks,
Ajay
\Ajay

Similar Messages

Data mismatch after migration

Hi experts,
There is a mismatch in data when comparing a query o/p before and after migration...
Can any one please tell wat may be the reason.
This is urgent please.....
Regards,
Pruthvi

Hi Pruthvi,
What "migration" are you talking about? You did a BI upgrade, or migrated your server from a box to another without changing BI version or what? Is that a standard query or a custom one? Is there any restriction in that query on any infoobjects?
First I would try to check the contents of the infoprovider (transaction LISTCUBE or RSA1), paying special attention to the selection criteria and the fields you want to display. Use exactly the same selections and fields that you have in the query.
Regards,
Csaba

Different Format date LOV after migrated report

Hi,
I have migrated report from BO 6.1.3 to BO XI 3.1 SP3.
Report has migrated but i have one issue like:
The date format is different for lov of Report in 6.1.3 and XI 3.1 SP3, even when I recreate the prompt
Old Report 6.1.3 before migration                               'dd/mm/yyyy'
Old Report 6.1.3 after migration on XI 3.1 SP3            'mm/dd/yyyy'
New Report XI 3.1 SP3                                                'dd/mm/yyyy'
and when I run the query the data is incorrect.
Please let me know how we can resolve this issue....
Thanks

Diego,
Try converting the report from Deski to Webi and see how the prompts work out.
Longer term this is a better option anyway with Deski going in version 4.
Regards,
Mark

Problem with the ECC6 Data sources after migration

Dear All.
I transfer all the data source which is required for sales overview cube 0SD_C03.
lets take two senairos.
for example take 2LIS_11_VAHDR to BI 7 and then i migrate this data source with Export option after that i activate the data source and then i initialize the delta request with data.
the request successfully generated in BI to R/3 but in monitor it shows in yellow for long period of time and no data arrive i wait for 30 min but nothing happen.
in second one i initialize the delta process for data source 2LIS_12_VCHDR this data source i did't migrate but face the same situation.
can you please explain what will be the cause of this and how i can manage to fetch the data from ECC6 client through Business content data source.
i did not migrate the update rules into transformations.
any help will be highly appreciated.
kind regards,
Zeeshan

yes that is what exactly happen i did not do any thing as in the previous update rules there are written complex abap routine.
please let me know how to generate the update rules as was there previously or if i have to revert the datasource back to the previous position what i have to do.
i have figure out that why the data is not coming from SAP just need steps that how to revert the data source or make the new transformations with generated update rules or transformation.
any help will be highly appreciated.
Kind Regards,
Zeeshan
Edited by: Zeeshan haider on Jun 2, 2009 6:02 PM

Error in date prompt after migrating from 5.x to XI R2

Hi,
We have migrated from 5.x to XiR2 SP5 and are facing a problem with the date input parameter.
Our users use DESKI , when they try to access thier reports based on Stored Procedure,and the reports having date prompt , they get an error.
In 5.x they used to enter the date as DD MON YYYY , in XIR2 they enter it as MM/DD/YYYY but still we get the error
"The variable is of type date enter its value in the format 9/17/2009 14:50:00 PM"
The users tried this too but still the same error persists. The Oracle.prm and Oracle.sbo file on teh users machine is the same as that of the server.
I am able to recreate this error after logging onto the server and opening DESKi there. This error is occuring only with Stored procedures that take date as input parameter
has anybody faced this issue before, any resolutions for this
Thanks in advance
Shreekantha

Hi,
After analyzing this problem , what we found that no Stored Procedures that take user input are functioning, irrespective of teh datatype of the input prompt.
For all SPs that take user input we get an error saying
Connection or SQL sentence error: (DA0005)
Exception: DBD, ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'PROCEDURE_TEST_WITHOUTDATE'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
State: N/A

User mail had date changes after migrating to dovecot

I upgraded from 10.5.8 Server to Snow Leopard last week. A few problems occurred during the migration:
1) Permissions to the /var/spool/imap/dovecot/mail/ were read only
and
2) Many random email messages had their date stamp changed to November 2020. Some users had a few, others had thousands.
I've since repaired the permission issue, but is there a way to fix the date stamp? If you open the email it displayed the date correctly.

I saw the same problem and manually reimported all of my mail stores since it was down and I caught it soon enough to not make a difference. There is a problem with how Setup Buddy does the importing. I found the directions in the migration guide to manually bring it over. Page 42 of the PDF.
However if you've gone too far, I found this thread that may take care of it for you.
http://discussions.apple.com/thread.jspa?messageID=10334902&#10334902

After migrating data from Time Machine, some of my photos are not showing up in iPhoto. I get a 'dashed rectangle." When I click on it I get ' ! in a Triangle" When I click on that, I actually can see the photo. I want to see my photos

After migrating data from Time Machine, some of my photos are not showing up in iPhoto LIbrary view. I get a 'dashed rectangle." When I click on it I get ' ! in a Triangle" When I click on that, I actually can see the photo. I want to see all my photos in 'Library' view, and I can't figure out how these photos seem to be arbitrarily hidden. Help, please.

Try these for the first attempt:
First be sure to have a backup copy of the library if you already don't have one.
OT

Date issue in webi report after migration to XI 3.1

Hello All,
We had designed a webi report in BOXIR2 with run date present in report header section. This report was working fine in XIR2 environment.
However after migrating this report to XI 3.1 with sp2 and fp2.2, we have observed that date part is getting eliminated from the report header. If date is 13/01/2010, then only 13 is visible and rest of the date is getting out of report. This happens when we export report to PDF (We need final output in PDF).
The same thing was working fine in XIR2. From 'properties' section of report, we have verified that report format has not changed. Also we are using latest version of Adobe (9.2).
Can you suggest us the steps to resolve this issue?
Sincerely,
Chinmay

Hi,
When you view the Report in WebI Format is the Date shown correct ?
When you export the Report in xls. is the Date shown correct ?
Could you please re- validate your formular in XI 3.1 for the date
Compare the Format of the Object in the Universe between Rel.2 and XI 3.1 (if the Date informations in an object in your Universe)
Only Adobe Reader 8.1.2 and 9.0 are supported. Can you please install one of these versions and retry ?
Regards
-Seb.

Data Link after data migration

Hello All,
In a scenario during data migration from R/3 to Ecc. If we migrate the data related to orders, deliveries, invoices separately, how will we able to link these orders, deliveries and invoices after migration. As we will be giving new number ranges too for them.
Please advice.

Good Morning,
We create a filed in Template and links the column from the drop down List.
http://3.bp.blogspot.com/_KYY-OV98iIo/TDYcUCy2GDI/AAAAAAAAAIA/TNo1Arn9Rls/s1600/verticalLine.bmp
Mark accordingly

Date of alerts after migration

After migration - restore of backup (from 2.6 to 4.0), alerts are restored, but not with original date of creation on old system, but all of them with same date&time of restoration on new system? Can it be fixed somehow?

Alerts will migrate along with data. Couple of things make sure after upgrade.
Your WFE servers are in exchange relay to send emal to out of network users.
If URL of web application / site collection change then some case you have to update the url.
It is highly recommended that test your migration before performing in production.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Trackpad do not work properly after migration data from old imac to new macbook pro

After migration all my Data from my old imac to my new macbook pro (both running on OS Maverick) with migration assistant, the trackpad of the new macbook pro doesn´t work properly any more.
But the trackpad had worked properly before the data migration!
But now the trackpad feature of scrolling up and down with two fingers doesn´t work. (Other features are ok.)
I have tried to change the trackpad settings, but still doesn´t work.
Can anyone help me???

You are still under warranty. Call Apple Care. Make sure you get a case number as all repairs have an additional 90 days of warranty.
#1 - You have 14 days from the date of purchase to return your computer with no questions asked.
#2 - You have 90 days of FREE phone tech support.
#3 - You have the standard one year Apple warranty.
#4 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years. You can obtain AppleCare anytime up to the first year of the purchase of your computer.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired.

Serious problem after migration assistant - any ideas?

Hi folks-
I bought an iMac this weekend and for various reasons did not configure with data from my MacBook Pro when I first turned it on, but waited until two nights ago to use Migration Assistant to transfer all but users.
I updates both machines fully with Software Update first. MigAsst went fine until I hit the begin option and after a few minutes the iMac told me there was a problem with my MacBook Pro (MBP). I quit MigAsst on the iMac but even after an hour I couldn't escape it or quit the MBP, so shut down using the power button.
When I restarted, I had a black screen with lighted keyboard and startup chime. I hard-restarted, same thing happened. Third time, I got the grey apple window with no apple for about ten minutes, then a light blue screen with the spinning spokes (not the rainbow) and a slightly darker window with no spokes. The two blue windows alternated back and forth for maybe 8-10 seconds each endlessly until I restarted.
Since I live about 4 hours from the nearest Apple store and tech support was already closed for the evening, I restarted from the Snow Leopard disk and repaired permissions (there were many repairs) and repaired the disk (was told it was fine). I restarted and got the grey-blue-blue cycle again.
I reinstalled the OS from the Snow Leopard disk and everything worked fine - I ran as many tests as I know how to, even perturbed the casing slightly wondering if it was a loose video card wire or something. Nothing. It all worked fine for several hours until after the second Software Update (which as I recall was only Java and iTunes), and now all I get is the black screen again. Also, now the green light on the power cable is not glowing even though the battery reads as fully charged and the keyboard and startup chime are all hunky dory.
I'd think it was a video card issue, but there are too many incongruous symptoms. If I could at least start up from the OS disk again I could get my data off... Any ideas, diagnoses or suggestions would be much appreciated.
With gratitude and blessings.

The problem is described in a different post as well, and it is considered to be answered. However, the answers are not very satisfactory because they are complicated.
The underlying problem is that MacOS is looking for a FileVault user, while after migration the user files are actually not within a FileVault bundle.
I believe that there must be a setting to change the login properties for the user to not look for a FileVault user, but for a plain, non-encrypted user. So please, somebody from Apple answer this questions!
Command line very welcome, because I only have a command line user right now. And oh, my MBA didn't ship with a boot DVD so I don't even have the chance to reinstall my system easily. Also, getting my data out of the FileVault on my current machine, transfering everything again (almost 250 GB) and then putting them back into FileVault seems a bit too much effort for what appears to be a simple bit set somewhere…

PPR does not work after migrating from ADF 11.1.1.0.2 to 11.1.1.1.1

Hi, I'm able to programmatically refresh my UI components in ADF 11.1.1.0.2. After migrating my application to ADF 11.1.1.1.0 using the latest Jdev, I noticed that all the programmatically PPR no longer work. I'm using ADF Faces, managed beans and EJB. Data Control is not used.
In addition, I noticed in Section 7:Rerendering Partial Page Content of the latest Web User Interface Developer's Guide(B31973-03), a new paragraph was added, stating that the clientComponent attribute of the target component should be set to "true" to enable PPR programmatically. An earlier version of the developer guide(B31973-01) does not have this paragraph.
Given the huge amount of work required in going back to update the code, is there a way for me to set ADF 11gR1 to restore to the earlier behaviour in 11.1.1.0.2 by setting some parameter somwhere (e.g. in the web.xml)?

No there is no such switch. If you don't want to go through your code (which should be possible by find in files with a regular expression), you have to switch back to 11.1.1.0.2.
This would not be an option to me because of the buds fixed in 11.1.1.1.0.
Think aoubt the next version which is scheduled later this year. There you will have the same problem. If you are not fixing the code you have to stay on 11.1.1.0.2 forever.
Timo

Report generation failed after migrated from 6i to 10g.

Hi All,
i have migrated the 6i application to 10g.
There was a report which was generated in .html format and saved to a remote server location.
Now after migration to 10g,when i run the report through the URL ,It is still generated on the same remote server location but the it is not showing in the application interface.
Please help....
Thanks,
DK

Hi, Mike,
user3211655 wrote:
Hi All,
We try to migrate a 8i database to 10g by using the exp and imp. All tables and data are already migrated by imp. During the imp, there are errors said the trigger compile with errors.
When login to the em to check, I found these 2 errors.
Line # = 2 Column # = 1 Error Text = PL/SQL: SQL Statement ignored
Line # = 2 Column # = 60 Error Text = PL/SQL: ORA-00942: table or view does not exist
My trigger is a very simple one:
BEGIN
Select TB_COUNTER_SEQ.NEXTVAL INTO :NEW.INCREMENT_NUM FROM DUAL;
END;
And I'm sure the "TB_COUNER_SEQ" is there.
Do I need to change anything on the trigger when migrating from 8i?
In fact, besides this trigger, all other trigger imp to this schema are having the same error. The schema in the 10g is a newly created one, is there any special right I need to create grant to this new user?Grant the necessary privileges on the tables (and any other objects used, like sequences) directly to the owner of the triggers. Privileges granted to a role don't count in AUTHID OWNER stored procedures; the privileges have to be granted to the owner of the stored procedure (or to PUBLIC).
It the error is occurring at position 60, then it looks like you don't have privileges on dual. Login as SYS and
GRANT SELECT ON dual TO PUBLIC;You may need synonyms (perhaps public synonyms) for the objects, too.

Migration to new G/L , balance and line item display after migration

Hi,
After migration in the development
system, the balance of a G/L account
in a year before the migration date
cannot be displayed unless the G/L
account is managed on open item basis
or is a reconciliation account. The
message "No data found in 2007" is
issued.
Additionally, the correct balance of
G/L accounts if it is managed on open
item basis or is a reconciliation
account cannot be displayed by
FAGLB03.Only the balance of open items
can be displayed.
How can we display all line items of a
G/L account in year 2007?
Thanks in advance and kind regards,
Gökçen.

Hi Elena,
This is a very complex area. You need to check the following notes:
1070629 - FAQs: Migration to General Ledger Accounting (new)
1014364 - New G/L migration: Information, prerequisites, performance
You may also have to contact SAP Migration Services
[email protected]
Regards,
Ravi

Data Encryption after Migration

Similar Messages

Maybe you are looking for