Data Entry Tab for Numeric Indicator does not Exist

Hi
I'm trying to set the data range for numeric indicators on LabVIEW 10.0.1. For some reason when I go to properties of my numeric indicator, there is no Data Entry Tab as explained on the NI website: http://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/changing_data_ranges_of_nu/. Also, in the data type tab, there is a section for range but everything is grayed out. Any help is appreciated. Thanks
Solved!
Go to Solution.
Attachments:
Question.png ‏159 KB

Hi
Thanks for the replies
I just realized that data entry on a numeric indicator doesn't really make sense. But my question is, how do I go about setting data range for a numeric indicator? Based on this tutorial : http://www.ni.com/pdf/manuals/320998a.pdf (Page 128/250) in the older versions there seems to be a data range tab or option when you write click the indicator. In my case, the range is greyed out and I tried to play with it with no avail.
Thanks very much

Similar Messages

HT4623 My tab for software updates does not exist under settings or any other location. Where do I update from now

I am trying to update my Ipad however the software upgrade tab is none exsitant. How do I upgrade now.

The Settings > General > Software Update option only appears when you have iOS 5+ installed, if you have iOS 4 then you will need to do the update via your computer's iTunes as described half-way down the page that you posted from.
Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Devices > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand sidebar of iTunes and selecting 'Backup' (on iTunes 11 you can enable the left-hand sidebar via option-command-S on a Mac, control-S on a PC)
Then start the update by selecting the iPad on the left-hand sidebar, and on the Summary tab on the right-hand side clicking the Check For Updates button
Updating to iOS 5+ : http://support.apple.com/kb/HT4972

Error "Account assignment 00 for purchase document does not exist " when u

Hai,
I am encountering the following problem when posting a PO based Invoice using BAPI_INCOMINGINVOICE_CREATE.
The error says " account assignment 00 for purchasing document does not exist".
The scenario is very simple. I need to raise an Invoice against a PO. the PO has a single line item of quantity 10 net price 10. Tax code is U2 ( 7% tax).
I am passing the following at header level.
Invoice_indicator ( as 'X'),company code,doc date , posting date, gross amount (107, currency USD, calc tax indicator as 'X'.
At line item i am passing Invoice document item 000001, po number , po item number, tax code(U2) item amount (100),
Does this error has got any thing to relate configuration matters?
Regards,
Upender

Hi Upender,
In some cases, depending on the type of PO / Posting,
you might have to populate the accounting data itab and pass in the BAPI parameter.
you can select the accounting data from EKKN for the PO.
Again it depends on the PO category, wether you need to populate Qty & Unit in accounting data.
Further, the accounting data should be exactly the same as there in EKKN ( all the fields except Qty & Unit ).
Thanks,
Ram

Number range for object MDTB does not exist - Message no. 61501

Hi All ,
I have done the necessary configurations in PP say
Order Type
Order Type Dependent Parameters
Scheduling parameters for planned & production order
Confirmation parameters
Availabilty check etc
and iam able to create planned & production order and confirma the production order.
I want to configure for MRP: -
Settings done are
Have activeted planning file entry for all plants.
When i run MRP system throws a error <b>Number range for object MDTB does not exist - Message no.61501 </b>
Is there anything to do with plant parameters OPPQ and Mrp Group OPPR.
I just tried plant parameters,standard 0001 is not available for copying.
Suggest me how to proceed to set MRP.
Shankar

Hi shankar
it is a good practice while creating the plant copying the plant from the standard plant so that all the standard table enteries will be copied for the plant as the standard plant is not there youcan think of copying from any other plant similar to your plant which has the required entry. else
in SE16N check the NRIV table for the Object MDTB. if enteris found then make the table entry with the help of abaper.
hope this helps
regards
SK

I cannot update or install updates on itunes. It says that the location for that file does not exist. I cant even uninstall itunes as the same error message comes up.

I cannot update or install updates on itunes. It says that the location for that file does not exist. I cant even uninstall itunes as the same error message comes up.

Hi vindog60,
Thank you for using Apple Support Communities.
To troubleshoot this issue where you get an installation error with iTunes on your Windows PC, please follow the steps in the article linked to below.
Issues installing iTunes for Windows - Apple Support
Cheers,
Alex H.

Error: Number range for object RESB does not exist

Hi
I'm trying to convert a planned order (to purch requisition) partially via trxn code MD04. Upon saving I get the above error msg. The complete text of msg is as follows. I've maitained the number ranges of all the objects specified in this error msg. Can somebody explain on how to overcome this problem?
Many thanks
BE
Error Msg Text:
Number range for object RESB does not exist
     Message no. 61501
Diagnosis
     The system cannot create a document for an MRP element if no number
     range or interval has been maintained in Customizing of MRP or if t
     number range you have maintained is not allowed.
     Below is a list of MRP elements that are affected:
     Number range object MRP element
     PLAF                 planned order (operative oder simulative)
     EBAN                 purchase requisition
     RESB                 dependent requirements
     MDSM                 simulative dependent reqmts (long-term plannin
     MDTB                 MRP list
Procedure
     Check the number ranges in Customizing. If you do not have the necessa
     authorization, please get in touch with your systems administration.

Hi
Thanks for the reply. But I have maintained the number ranges for matl. reservations/dependant requirements at OMI2. Here is the screen shot..Do find anything wrong with it? Pl advice.
NR Object                             MRES/DREQ
No.                          From Number            To Number          Curr Number          Ext
01                           0000000001               8999999999           380                    blank
02                           9000000000               9500000000           blank                  checked
RB                          9500000001               9999999999           blank                  checked
Number ranges for the plants are assigned to 01 (0000000001 to 8999999999).
thanks
BE
Edited by: Brian Elfie on Jan 10, 2008 11:27 AM

The bp id for org unit does not exist

Dear expert,
after transport the org structure from dev to qty system , we found the bp id for org unit does not exist in qty system.
in ppoma_crm, we can see there is a bp id assigned to the org unit. however, when use tcode 'bp' to check the bp id, the system can not fould a valid id.
what can we do to solve the issue?
will there any impact if we keep no bp id for the org unit?

Hi,
You can use the transaction CRM_OM_BP_INTEGRATE.
Select the Org unit and enter the org id in the input field and execute it.
Select the org unit from the result list and click on the button Start Repair. This will create a BP without errors for the respective org unit.
Regards,
PP

HT1688 why do i have to reauthorize a computer that was already authorized, the computer i purchased some songs on does not exist anymore, and the email for that account does not exist anymore.

why do i have to reauthorize a computer that was already authorized, the computer i purchased some songs on does not exist anymore, and the email for that account does not exist anymore. i can reset password because i doent know what the old one was

Hi lgmmo,
I think your best best to get this resolved is to contact Adobe Customer Care. Here's the contact info: Contact Customer Care.
A quick Chat session should get you fixed up.
Please let us know if you have additional questions.
Best,
Sara

Error: Bank N.A. for country IN does not exist"

Hello Gurus,
When i am monitering Bdoc messages in Tcode:SMW01 ,there is an error message as"Bank N.A. for country IN does not exist"
So please help me to solve this problem.
Thnks in adv,
Divya.

Hello Gregor ,
I didn't do Initial Download of the Customizing DNL_CUST_BNKA in Transaction R3AS.
Regards,
divya

Number range for object BANF does not exist

Hi Guru's
I have been trying to convert the Planned orders to Purchase requisition and unfortunately the system consistantly giving me the error as reflected below despite changing the numbering range on the affectred documents. Please help.
Number range for object BANF does not exist
Message no. 61501
Diagnosis
The system cannot create a document for an MRP element if no number range or interval has been maintained in Customizing of MRP or if the number range you have maintained is not allowed.
Below is a list of MRP elements that are affected:
Number range object MRP element
PLAF planned order (operative oder simulative)
EBAN purchase requisition
RESB dependent requirements
MDSM simulative dependent reqmts (long-term planning)
MDTB MRP list

Hello,
You can define number range for Purchase requistions in OMH7 transaction agaist each number range number and you assign can assign these number range number to your purchase requistion document types in SPRP >> Materials management >> Purchasing >> Purchase requistion >>Define doucment type.
E.g for NB doc type number range number is 20
and in OMH7 number range number 20 has interval from- 2000000000 to 2099999999
same way
for RV doc type number range number is 21
and in OMH7 number range number 21 has interval from- 2100000000 to 2199999999
Regards,
Shailesh

Hierarchy for material types does not exist

Hi,
I am doing an intial configuration in SRM 7.0 we have actvated extended classic and PPS activated.
In the first level of configuration ai heve set up the logical systems and the system landscape.
when i am in R3AS
DNL_CUST_BASIS3
DNL_CUST_PROD0
DNL_CUST_PROD1
DNL_CUST_SRVMAS
the above objects wre green when i executed
For the object MATERIAL
I am getting an error
Hierarchy for material types does not exist
Message no. COM_PRODUCT_API000
Diagnosis
Before materials are imported from the ERP system, the material types from the ERP system must exist as categories in CRM/EBP. When the Customizing object DNL_CUST_PROD1 is imported, the material types are imported automatically and created under the category MAT in the category hierarchy R3PRODSTYP (product subtype).
Procedure
Check whether the ERP system material types have been imported successfully and exist as categories.
Proceed
If necessary, import the Customizing object DNL_CUST_PROD1.
Kindly guide me

Hi,
It looks you have not configured the middleware basic settings. Queue should be registered in SMQR transaction.
Please follow the configuration guides in SAP Solution Manager or offline downloaded version in SAP Service Marketplace.
http://service.sap.com/srm-inst
Regards,
Masa

The file required for contribute compatibility does not exist on the server

Hi, when connecting to a server in Dreamweaver that is set up
for Contribute I keep getting this message when putting files:
quote:
The file required for contribute compatibility does not exist
on the server. Would you like to turn off Contribute compatibility?
I see the post from jonbradley below, but the solution
suggested doesn't help me:
Does anyone have any idea what this means and how to stop it
from displaying?
Thanks in anticipation...
Simon

Did you search the forum on compatibility?
http://www.adobe.com/cfusion/webforums/forum/searchresults.cfm?requesttimeout=500&cate gory=290&forumid=55&FTVAR_KEYWORD1FRM=compatibility&FTVAR_SEARCHWHATFRM=c& FTVAR_RESULTTYPE=topics&FTVAR_AUTHORFRM=&FTVAR_TABLECHOICEFRM=current&FTVAR_CA TEGORYIDFRM=290&Selection=false&FTVAR_DATESELFRM=Select&FTVAR_STARTDATEFRM=&am p;FTVAR_ENDDATEFRM=&cal_d1=0&cal_d2=0

11.5.10.2 to R12.1.1 upgrade : AutoPatch warning : Product Data File $APPL_TOP/admin/*prod.txt does not exist for product

Hello Sir,
OS version : AIX 6.1
DB version : 11.2.0.3
EBS version : 11.5.10.2
As a part of 11.5.10.2 to R12.1.1 upgrade, I am applying merged patch (9179588:R12.AD.B) with 9477107:R12.AD.B and patch 7461070(R12.AD.B.1 upgrade driver).
I can see AutoPatch warning messages during adpatch session as below so I have not yet started this merged patch. Please suggest.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drix10:/fmstop/patches/R1211AD/merge>adpatch
                     Copyright (c) 2002 Oracle Corporation
                        Redwood Shores, California, USA
                         Oracle Applications AutoPatch
                                 Version 12.0.0
NOTE: You may not use this utility for custom development
      unless you have written permission from Oracle Corporation.
Attention: AutoPatch no longer checks for unapplied pre-requisite patches.
You must use OAM Patch Wizard for this feature. Alternatively, you can
review the README for pre-requisite information.
Your default directory is '/fmstop/r12apps/apps/apps_st/appl'.
Is this the correct APPL_TOP [Yes] ?
AutoPatch records your AutoPatch session in a text file
you specify. Enter your AutoPatch log file name or press [Return]
to accept the default file name shown in brackets.
Filename [adpatch.log] : adpatch_u_merged_R12AD11.log
You can be notified by email if a failure occurs.
Do you wish to activate this feature [No] ?
Please enter the batchsize [1000] : 2000
Please enter the name of the Oracle Applications System that this
APPL_TOP belongs to.
The Applications System name must be unique across all Oracle
Applications Systems at your site, must be from 1 to 30 characters
long, may only contain alphanumeric and underscore characters,
and must start with a letter.
Sample Applications System names are: "prod", "test", "demo" and
"Development_2".
Applications System Name [FMSTEST] : FMSTEST *
NOTE: If you do not currently have certain types of files installed
in this APPL_TOP, you may not be able to perform certain tasks.
Example 1: If you don't have files used for installing or upgrading
the database installed in this area, you cannot install or upgrade
the database from this APPL_TOP.
Example 2: If you don't have forms files installed in this area, you cannot
generate them or run them from this APPL_TOP.
Example 3: If you don't have concurrent program files installed in this area,
you cannot relink concurrent programs or generate reports from this APPL_TOP.
Do you currently have files used for installing or upgrading the database
installed in this APPL_TOP [YES] ? YES *
Do you currently have Java and HTML files for HTML-based functionality
installed in this APPL_TOP [YES] ? YES *
Do you currently have Oracle Applications forms files installed
in this APPL_TOP [YES] ? YES *
Do you currently have concurrent program files installed
in this APPL_TOP [YES] ? YES *
Please enter the name Oracle Applications will use to identify this APPL_TOP.
The APPL_TOP name you select must be unique within an Oracle Applications
System, must be from 1 to 30 characters long, may only contain
alphanumeric and underscore characters, and must start with a letter.
Sample APPL_TOP Names are: "prod_all", "demo3_forms2", and "forms1".
APPL_TOP Name [drix10] : drix10 *
You are about to apply a patch to the installation of Oracle Applications
in your ORACLE database 'FMSTEST'
using ORACLE executables in '/fmstop/r12apps/apps/tech_st/10.1.2'.
Is this the correct database [Yes] ?
AutoPatch needs the password for your 'SYSTEM' ORACLE schema
in order to determine your installation configuration.
Enter the password for your 'SYSTEM' ORACLE schema:
The ORACLE username specified below for Application Object Library
uniquely identifies your existing product group: APPLSYS
Enter the ORACLE password of Application Object Library [APPS] :
AutoPatch is verifying your username/password.
The status of various features in this run of AutoPatch is:
                                           <-Feature version in->
Feature                          Active?   APPLTOP    Data model    Flags
CHECKFILE                        Yes       1          1             Y N N Y N Y
PREREQ                           Yes       6          6             Y N N Y N Y
CONCURRENT_SESSIONS              No        2          2             Y Y N Y Y N
PATCH_TIMING                     Yes       2          2             Y N N Y N Y
PATCH_HIST_IN_DB                 Yes       6          6             Y N N Y N Y
SCHEMA_SWAP                      Yes       1          1             Y N N Y Y Y
JAVA_WORKER                      No        1          -1            Y N N Y N N
CODELEVEL                        No        1          -1            Y N N Y N N
Identifier for the current session is 2987
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/eaaprod.txt
does not exist for product "eaa".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/abmprod.txt
does not exist for product "abm".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/evmprod.txt
does not exist for product "evm".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ipdprod.txt
does not exist for product "ipd".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/zfaprod.txt
does not exist for product "zfa".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/zsaprod.txt
does not exist for product "zsa".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/cssprod.txt
does not exist for product "css".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/meprod.txt
does not exist for product "me".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/xnmprod.txt
does not exist for product "xnm".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/xncprod.txt
does not exist for product "xnc".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/xnsprod.txt
does not exist for product "xns".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/fptprod.txt
does not exist for product "fpt".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/okrprod.txt
does not exist for product "okr".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/cueprod.txt
does not exist for product "cue".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ibaprod.txt
does not exist for product "iba".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ozpprod.txt
does not exist for product "ozp".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ozsprod.txt
does not exist for product "ozs".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/rlaprod.txt
does not exist for product "rla".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/vehprod.txt
does not exist for product "veh".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/rhxprod.txt
does not exist for product "rhx".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/imtprod.txt
does not exist for product "imt".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ahmprod.txt
does not exist for product "ahm".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/okbprod.txt
does not exist for product "okb".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/okoprod.txt
does not exist for product "oko".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/xniprod.txt
does not exist for product "xni".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/jtsprod.txt
does not exist for product "jts".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/amfprod.txt
does not exist for product "amf".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/cunprod.txt
does not exist for product "cun".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
Reading database to see what industry is currently installed.
Reading FND_LANGUAGES to see what is currently installed.
Currently, the following language is installed:
Code   Language                                Status
US     American English                        Base
Your base language will be AMERICAN.
Setting up module information.
Reading database for information about the modules.
Saving module information.
Reading database for information about the products.
Reading database for information about how products depend on each other.
Reading topfile.txt ...
Saving product information.
Trying to obtain a lock...
Attempting to instantiate the current-view snapshot...
No baseline bug-fixes info available. Will attempt next time.
     **************** S T A R T   O F   U P L O A D ****************
Start date: Sun Aug 04 2013 18:45:12
0 "left over" javaupdates.txt files uploaded to DB: Sun Aug 04 2013 18:45:12
0 patches uploaded from the ADPSV format patch history files: Sun Aug 04 2013 18:45:12
Uploading information about files copied during the previous runs ...
0 "left over" filescopied_<session_id>.txt files uploaded to DB: Sun Aug 04 2013 18:45:12
     ****************** E N D   O F   U P L O A D ******************
End date: Sun Aug 04 2013 18:45:12
Enter the directory where your Oracle Applications patch has been unloaded
The default directory is [/fmstop/patches/R1211AD/merge] :
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

I checked under 11i $APPL_TOP/admin directory, I can see only one izuprod.txt file apart from applprod.txt.
drix10:/fmstop/fmstest/fmstestappl/admin>ls -lrt *prod.txt
-rwxr-xr-x    1 appltest dba          231650 Oct 30 2004 applprod.txt
-rwxr-xr-x    1 appltest dba            4966 Sep 21 2007 izuprod.txt
R12 code tree is newly installed so there is only applprod.txt
drix10:/fmstop/r12apps/apps/apps_st/appl/admin>ls -lrt *prod.txt
-rwxr-xr-x    1 appltest dba          226340 Jul 29 15:19 applprod.txt
Please suggest if I can ignore these warning to proceed with applying merged patch.

Error in data loading "The object R3TR AQQU *does not exist"

Hello Guys,
I am trying to load full data from my datasource to DSO but whenever i am running infopackage, its failing with error message
"Job terminated in source system Message no. RSM078"
I am checking in job overview it said
"The object R3TR AQQU * does not exist
The TADIR entry for the object R3TR AQQU SYSTBWGENER0SY000000000102 cannot be entered because the object does not exist yet."
Please suggest.
Regards,
Dolly

Hi Dolly,
I think your DS is based on an ABAP query which is not available in the source system. Check if that is transported/active.

IMovie searching for files for project that does not exist...

Whenever I fire up iMovie 09 on Lion, it spins, and then tells me it can't find a video file for a project that does not exist. That is, it says 'File xxx.mov from project 'Movie 1 cannot be found - without this file the movie cannot be played.' The project is one I deleted a long time ago, and does not appear in the project list. How can I force iMovie to forget about this?
Thanks!
PS the specific error is 'Searching for movie data in file "New Project 1 - Large.m4v". The only button is "Stop". so I press that, then a new dialogue box saying 'The movie file 'New Project Large.m4v" cannot be found. Without this file, the movie cannot play properly." It has cancel and search buttons. Obviously, searching doesn't help - it was deleted a long time ago. Cancelling makes it go away until iMovie is launched again.

Whitecity,
This is awesome.
So moving forward from here, you can narrow down which event is causing the behavior but systematically trial and error. Once you determined the exact event folder, there are subfolders underneath:
/iMovie Movie Cache/
/iMovie Stabilization/
/iMovie Thumbnails/
Try removing these to see if iMovie rebuilds them.
Calbe

Data Entry Tab for Numeric Indicator does not Exist

Similar Messages

Maybe you are looking for