Data exceeds its margin on web!

GURUS !!! NEED HELP !!!
We find some problems in reports while mirgating our
client/server project to 9iAS forms/reports server.
We are generating reports on 'pdf'.
We found the following differences when compared same data on
C/S and Web. (We used the recommended fonts!)
1. The number of characters each line in text area exceeds in
web.
2. The inter-character space and inter-line space in web is more
than the C/S version. So, that the data in web exceeds its right
margin and overlapping the next column and line.
The problem occurs on Win NT4.0 and Sun OS 2.6 servers we tested
on.
Is this a bug ? Is there a fix available ?
Please help! Thanks in advance.
Krishnakumar.

If you are connected to wifi at home or elsewhere you shouldn't be using any of your Verizon cellular data.  I say shouldn't because there are a number of posts/threads on this forum where customers are reporting glitches with their iPhones and they indicate they are being charged data when on wifi.

Similar Messages

  • Safari downloading data "on its own"

    Hi,
    Yesterday I connected my iphone to use its 3G network with tethering. I browsed some sites and promptly received an SMS from my carrier, telling me that I had used all of my 500 MB of monthly data.
    Surprised, I checked the "Tethering data" within the iphone settings, and sure enough, I had used about 300 MB in about half an hour of light browsing, which is very strange.
    I started investigating and discovered that, sometimes, Safari starts downloading data while I'm doing nothing. Megabytes and megabytes of data. I don't know the source, and it's only input data, not output. I have checked with Activity Monitor, and closing Safari stops the data transfer. Opening it again resumes data transfer
    Please note that I consider myself an advanced user, so I have googled a lot, checked that the pages aren't downloading any video in the background (in fact I use FlashBlock), etc. Even disabled automatic update for plugins, but no luck.
    I have tried to reproduce the problem and it's kind of difficult because the rogue data downloading from Safari is quite random.
    So, my question is, why is Safari downloading data on its own when I'm doing nothing, which data is it, and how can I stop Safari from doing it. It's eating up my connection and now I have to use Chrome to browse the internet, as Safari kills my 3G data plan.
    Thanks!
    Carlos

    Install the free application "TinkerTool" (not "TinkerTool System"), select the Safari tab, and check the box labeled "Disable storage of preview images for web pages." Quit and relaunch Safari.

  • Get date from portal in a web dynpro?

    hi all,
    how get date from portal in a web dynpro???
    thanks.

    new Date(System.getTimeInMillis());
    Good luck, Roelof

  • Exif Data Not Showing Up in Web Gallery?!

    Some of my exif data is missing from my web gallery! f-stop, shutter speed missing.. check it out:
    http://gallery.mac.com/johnnymcclung

    Actually it is showing "max aperture" but not the actual aperture I shot at - I now can see shutter speed... but the aperture I used for the shots aren't showing up - either way, I had fun shooting the eclipse last night!

  • Server Exception : The data exceeds the length

    Hi All,
    I am updating a MDM record through API . modifyrecord . I am changing almost 50 fields in record and then modifying . I get an error , the data exceeds the length . How can i know which particular Field is giving error . It just says the data excced the length but which fields is not shown in error .How to get the field name .

    Hi Govind,
    I assume u r using ABAP.
    Check if the data type u have assigned for all the fields is correct.
    Specially check for integer fields also.
    MDM_GDT_INTEGERVALUE only takes data upto 4 bytes  but if it exceeds this limit u need to use MDM_GDT_DOUBLE.
    Server exception mostly happens when some parameter is not entered correctly.
    Regards,
    Neethu Joy

  • DATE/TIME field in SNC Web UI - time field not visible in UI

    Hi,
    Typically DATE/TIIME field in SNC web UI comes with two separate fields, one for the date (DD.MM.YYYY) and the other
    for TIME (HH:MM:SS). I need to add an additional date field in the ASN screen in web UI. I was able to add the date field, but the time field doesnt appear adjacent to it. I used the interface method /SCF/IF_EX_UIMDL_APPCUST ~GET_FRM_DATA(BADI /SCF/UIMDL_APPCUST).
    I tried with copying the entries for the Delivery Date -
           DATA element assignment
              lw_field_prm-fieldid = 'LOADED_DATE'.
              lw_field_prm-paramid = 'LOADED_DATE'.
              lw_field_prm-dataelement = '/SCMB/DM_CHA_DATIM'.
              INSERT lw_field_prm INTO TABLE it_field_prm_map.
           Definition Field
              lw_frmfields-fieldid = 'LOADED_DATE'.
              lw_frmfields-frmfldtxt = 'Loaded Date'.
              lw_frmfields-frmfldttip = 'LOADED_DATE'.
              INSERT lw_frmfields INTO TABLE it_frmfields.
           Layout Fields
              lw_frmlyt-fieldid = 'LOADED_DATE'.
              lw_frmlyt-frmrow = '1'.
              lw_frmlyt-frmcol = '5'.
              lw_frmlyt-valuetype = 'DATE'.
              lw_frmlyt-showhelp = 'X'.
              lw_frmlyt-cellsize = '015'.
              lw_frmlyt-valuetype2 = 'INPT'.       "TIME Field - HH:MM:SS
              lw_frmlyt-cellsize2 = '005'.
              lw_frmlyt-fieldidlongtext = 'TZONETO'.
              lw_frmlyt-fieldid2ndval = 'DELVRYTIME'.
              INSERT lw_frmlyt INTO TABLE it_frmlayout.
    Is is because the enclosing contained - Form Box not of sufficient width to accomodate time field adjacent to Date field?
    or is there any other way of getting the time field adjacent to date field in UI? Please help.
    Thanks and Regards,
    Rohit

    Hi Rajesh,
    Looking this post http://blogs.oracle.com/shay/entry/a_timehour_selector_in_adf_fac , indeed there's this possibility in af:inputDate. However, this post talks about adf bc, I think in your case it will be enougth to set an af:convertDateTime with the mask something like this: yyyy-MM-dd HH:mm:ss
    I hope this help you.
    Regards,

  • How to access  complex data type from a soap web services?

    hello
    can u please tell me how can i access complex data type from a soap web service from jdeveloper 10g
    Jdeveloper generates 3 classes
    serviceStub
    getproperties
    response
    i have to retreview the data which is a complex data type it gives some
    unknown type. and the return value is a key-value pair data type .
    regards
    vs

    After you create the partner link and the invoke (to create the variables), change the element type of the response message to the complex type definition of your collection that appears in the XSD. You can do the same thing if you want to change the element type of the payload of the request message as well.

  • Clustered role 'Cluster Group' has exceeded its failover threshold.

    Hello.
    I’m hoping to get some help with a cluster issue I’m having using Windows Storage Server 2012.
    When the cluster is created my Cluster Core Resources are all happy and online.
    I can more the Cluster Name using “move Core Cluster Resources” between the two nodes without any problems.
    If I select ‘Simulate Failure’ on the IP Address resource, it works the first time
    If I do it again shortly after it fails and I get an Event ID 1254, 1205 and 1069.
    Event ID 1254
    Clustered role 'Cluster Group' has exceeded its failover threshold. 
    It has exhausted the configured number of failover attempts within the failover period of time allotted to it and will be left in a failed state. 
    No additional attempts will be made to bring the role online or fail it over to another node in the cluster. 
    Please check the events associated with the failure.  After the issues causing the failure are resolved the role can be brought online manually or the cluster may attempt to bring it online again after the restart delay period.
    Event ID 1205
    The Cluster service failed to bring clustered service or application 'Cluster Group' completely online or offline. One or more resources may be in a failed state. This may impact the availability of the clustered service or application.
    Event ID 1069
    Cluster resource 'Cluster IP Address' of type 'IP Address' in clustered role 'Cluster Group' failed.
    Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it. 
    Check the resource and group state using Failover Cluster Manager or the Get-ClusterResource Windows PowerShell cmdlet.
    Basically I’m trying to simulate a network failure to make sure the failover kicks in.
    If I click on it and ‘Bring Online’ it comes up fine.
    Where do I find this Threshold Policy and set it to initiate failover if the IP Address resources fails?
    Thank you in advance for your help.

    Hi,
    The failover threshold is the number of times the group can fail over within the number of hours specified by the failover period. For example, if a group failover threshold is set to "5" and its failover period to "3," the clustering software stops attempting
    to bring the group online and leaves the resources within the group in their current state. For example, if the IP Address resource is brought online but the Network Name resource fails, the group is left offline, but the IP Address resource is left online.
    To configure thresholds for a resource:
    Right-click the cluster resource and then select 'Propereties'
    Click 'Advanced'
    Select 'Do not restart' if the cluster service should not attempt to restart. Restart is the default
    If 'Restart' is selected:
    Affect the Group: uncheck to prevent a failure of the selected resource from causing the Server group to failover
    Threshold: number of times the cluster service will attempt to restart the resource, and period is the amount of time in seconds between retries
    Do not modify the 'LooksAlive' and 'IsAlive' settings
    Unless necessary, do not alter the 'Pending Timeout'. This is the amount of time the resource is either in the online or pending or offline pending states before the the cluster service puts it in either offline or failed state
    For more information please refer to following MS articles:
    Windows Failover Clustering Overview
    http://blogs.technet.com/b/rob/archive/2008/05/07/failover-clustering.aspx
    Tuning Failover Cluster Network Thresholds
    http://blogs.msdn.com/b/clustering/archive/2012/11/21/10370765.aspx
    Failover cluster (group) maximum failures limit
    http://blogs.msdn.com/b/arvindsh/archive/2012/03/09/failover-cluster-group-maximum-failures-limit.aspx
    Lawrence
    TechNet Community Support

  • Help!-wont charge- A USB driver has exceeded its power limits?!!?

    my iPhone charged just fine for the past two months, and now it only charges sometimes.
    I will plug it into the wall charger, and it will charge just fine, and then i'll go to charge it again sometime, and it just wont charge, so i tried to plug it into my macbook, and my imac, and they both said "a USB driver has exceeded its power limits, etc, etc." and so i tried my PC, and it gave me the same message. This has happened more than once, and eventually it just charges, but then the whole situation will repeat days later.
    I've called apple over 3 times, and no one has helped me. so...
    help??

    First, try a different cable. It may be shorting out causing the USB port to overload. Especially since it happens on two computers.
    If the cable is ok, try turning the iPhone off. This can be done by holding down the sleep and home buttons until the off slider appears. Then restart it.
    If this doesn't help, take it to an Apple store for assistance.

  • Reference for working with a data collection retreived from a Web Service

    Does anyone have a good resource / example of working with multi row data collections returned from a web service call?
    In addition to the basic return of x data rows, I will also be getting parent child collections. For example,
    for each Customer row, 0 or more Customer Invoices
    I have found many guides the relate to single values being retrieved by the web service, but I have not found any that refer to data collections.
    Best regards,
    Thomas

    That can all certainly be done with a 13" MBP.
    You'd want to get a USB hub, preferably USB 3.0 to plug in your optical drive, keyboard and mouse.
    For your external monitor you can use a Mini DisplayPort adapter to DVI or HDMI (or if it's a retina MBP use the HDMI out).
    For your ethernet, it will plug right into the non-retina. If you get the retina, you'd need a Thunderbolt to Ethernet adapter (faster) or a USB to ethernet adapter (slower).

  • Linking two lists to create a Data Source but cannot add web part to page in SharePoint designer

    All;
    I created a new data source by linking two lists which created a linked Data Source. I now want to access that linked data source via insertion of a Data Source control on a web part page.
    What I find is, both DATA SOURCE and DATA VIEW are inactive and unselectable.
    Is there any way to get this functionality going?
    Thx
    Larry Pexter

    Hi Larry,
    Since it is a coding UI, we need to put cursor into appropriate place so we can insert data view web part, i.e. the coding which represents the web part in to the whole coding part.
    As I tested in my envrionment, if you put cursor between <ZoneTemplate> and </ZoneTemplate>, I cannot get the DATA view, even before </ZoneTemplate>. Please put it exactly before <ZoneTemplate>.
    If you have modify the coding, please click save and test the issue again.
    Regards,
    Rebecca Tu
    TechNet Community Support

  • Clustered role 'Availability Role' has exceeded its failover threshold

    I am getting this alert on SQL 2012 R2 SP1. So please kindly tell me the solution of the below given alert on windows failover clustering .
    Clustered role 'Availability Role' has exceeded its failover threshold. It has exhausted the configured number of failover attempts within the failover period of time allotted to it and will be left in a failed state. No additional attempts will
    be made to bring the role online or fail it over to another node in the cluster.Please check the events associated with the failure. After the issues causing the failure are resolved the role can be brought online manually or the cluster may attempt to bring
    it online again after the restart delay period.

    Hi Syed Tauseef Ahmed,
    Please offer more information such as under what circumstances this issue occurs, what event id you have got. The failover threshold is the number of times the group can fail
    over within the number of hours specified by the failover period.
    The related KB:
    Tuning Failover Cluster Network Thresholds
    http://blogs.msdn.com/b/clustering/archive/2012/11/21/10370765.aspx
    You can refer the following similar thread for the first step troubleshooting:
    Clustered role 'Cluster Group' has exceeded its failover threshold.
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/4eb44f05-eb9b-448a-821b-359879141608/clustered-role-cluster-group-has-exceeded-its-failover-threshold
    I’m glad to be help to you!
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Data types supported in weblogic web service

    I have used byte[] (base64) array to pass binary data using weblogic in a web service, since byte[] is a java datatype that is supported, is there a definite guideline available that byte [][] ( multi-dimensional array} is not supported in weblogic 8.1? (I have tried and failed with byte [][])
    Thanks

    Hi gchirrav ,
    Multi-Dimentional array support not listed in supported Data Types in weblogic 8.1.
    Go through the following link, you will find supported data types.
    http://e-docs.bea.com/wls/docs81/webserv/implement.html#1054236
    ----Anilkumar kari

  • Conversion of SAP Internet services / ITS programs to Web Dynpro programs

    Hi,
    I am new to Web Dynpro. The basic information in I need to know is, what are all the ways we can convert the exisitng Internet (ITS) services to Web Dynpro programs.
    Is there any tool available to convert them directly or does it involve any programming.
    Regards
    Satya

    I dont think that there is any tool available to do the conversion. you have to recode them
    Regards
    Raja

  • I/o scan time exceeded its period

    Hello
       I have been getting the error message "Labview: The I/O time exceeded its period" and wondered what might be causing it.
        The configuration is;
               Labview 2009 SP1
               9024 cRIO controller with a 9144 expansion chassis
               Scan mode time is 10ms with a publishing interval of 200ms
        The error occurs at seemingly random times when i download a vi to the controller to have it run there at startup.  This error generally occurs within 10 minutes, but can take hours.
        I can force the error by having the downloaded vi use a 9512 to control some motion, but it will eventually occur even if the vi does not use the 9512.
    Any ideas?
    Thanks
    Steve B

    Steve B,
    I'm assuming you're talking about the real-time application running at startup on the controller, right? So, if you don't run it at startup (just normal run operation), do you still see the same error? What if you change your scan and publishing time to different values, say slow them down to 100 and 1000ms, respectively.
    And what's your VI doing? Can you produce some code that illustrates the problem and post it here so that I may try to duplicate the problem?

Maybe you are looking for