Data exchange between SCM and ERP

Hi Guys,
Can you please tell what all data is exchanged between ERP system and SCM system.
I am doing a project to find out the exchange of data between these systems, it would be great if u can help me out or throw a direction to find these details.
Thanks a lot guys
Regards,
Kumar
POINTS ASSURED

Hi Kumar,
Please find detailed document help link as below:
http://help.sap.com/saphelp_scm70/helpdata/en/64/08533b89050863e10000000a114084/frameset.htm
For master data following data flow occurs from ECC to APO:
u2022     Products
u2022     Locations
u2022     Classes and characteristics
u2022     Batches
u2022     Setup groups
u2022     Resources
u2022     Production Process Modes / Produtc Data structures
Transaction data flow
u2022     Sales documents
u2022     Stocks
u2022     Inspection lots
u2022     Purchase orders and requisitions
u2022     Planned orders
u2022     Maintenance orders
u2022     Project / network orders
Regards
Datta

Similar Messages

Basic question regarding Contract data exchange between CRM and ERP

Hi,
1) At a very general level, can somebody tell me via what technology are contract documents exchanged between CRM and ERP? IDocs, RFC modules or proxies?
2) Is it possible to sychronise changes in a contract, e.g. if the contract is changes in the ERP system, those changes are auotomatically updated in the CRM contract?
3) Can somebody point me to any documentation on this?
Kind Regards,
Tony.

contracts are exchanged between CRM ans ERP ssytem ny RFC and FM , you use object SALESCONTRACT for this,it is possible to synchronize changes between both the systems

Standard XML schema for Vendor data exchange between SAP and other system

Is there a SAP standard way of XML schema that we exchange between SAP and other system? Please let me know.
Thanks.

See SAP Interface Repository (http://ifr.sap.com).
My proposal is to leave old SAP connectors staff and use SAP Exchange Infrastructure. There is a support of industry XML standards in XI 3.0 like xCBL.

How do i data exchange between TestDirector and labVIEW

Hai to all,
By using one COMServer(VC++), that COMServer exchange the data between TestDirector and LAbVIEW7.0, How to call LabVIEW function in activex, is it posible or not?
if posible please post your answer.

Hi reddys,
You can call the LabVIEW ActiveX Automation Server.
This can be done from any programming language.
Following the links below, you will find some examples.
Calling LabVIEW from C++ Using ActiveX
http://sine.ni.com/apps/we/niepd_web_display.DISPLAY_EPD4?p_guid=B45EACE3E21356A4E034080020E74861&p_node=DZ52051&p_submitted=N&p_rank=&p_answer=&p_source=External
Calling LabVIEW as an ActiveX Server from Visual Basic
http://sine.ni.com/apps/we/niepd_web_display.DISPLAY_EPD4?p_guid=B45EACE3E3D756A4E034080020E74861&p_node=DZ52051&p_submitted=N&p_rank=&p_answer=&p_source=External
Communicating with LabVIEW from Delphi using ActiveX
http://sine.ni.com/apps/we/niepd_web_display.DISPLAY_EPD4?p_guid=B45EACE3E8D156A4E034080020E74861&p_node=DZ52051&
p_submitted=N&p_rank=&p_answer=&p_source=External
Calling a LabVIEW VI with the LabVIEW ActiveX Automation Server
http://sine.ni.com/apps/we/niepd_web_display.DISPLAY_EPD4?p_guid=B45EACE3D85956A4E034080020E74861&p_node=DZ52156&p_submitted=N&p_rank=&p_answer=&p_source=External
Remote Control (Launch) of LabVIEW Using ActiveX/DCOM
http://sine.ni.com/apps/we/niepd_web_display.DISPLAY_EPD4?p_guid=B123AE0CBA64111EE034080020E74861&p_node=DZ52051&p_submitted=N&p_rank=&p_answer=&p_source=External
I hope this helps!
Regards,
Richard H.
National Instruments

Bp master data match between crm and erp

hi gurus,
is there a match list indicating the customer master fields in erp and in crm.
which field can be synchronized to crm? which field is the target one?
can gurus help provide? thank you.

Hi Daniel,
I am not sure if there is a list for that. But, the mandatory fields in R/3 should be same as the mandatory fields in CRM for the data transfer to be successful. You can set that up in transaction OVT0.
Regards,
Shwetha

Communication between CRM and ERP for E-commerce scenario

Question more on lines of system architecture design.
We are planning to implement CRM E-commerce and wanted to find out more detail about the communication between CRM and ERP systems. Do they need to communicate in real time for this application, or is it mainly initial and delta loads? Is the amount of data exchanged huge ( necessitating both systems to be on the same network, or can they be on separate geographical locations )?
We also understand that E-commerce can also be done only using ERP. How does that differ from the CRM version?

Hey Sanket,
Q 1 . Do CRM and ECC need to communicate in real time for Ecommerce application, or is it mainly initial and delta loads
Ans. CRM and ECC communicate using RFC connections which further uses TCP/IP as the protocol.The communication can be both real time { delta loads} or offline {initial download}.
Q2 .Is the amount of data exchanged huge ( necessitating both systems to be on the same network, or can they be on separate geographical locations )?
Ans. The amount of data can be huge hence its preferable that both systems to be on the same network.
Q 3. We also understand that E-commerce can also be done only using ERP. How does that differ from the CRM version
Ans.Theres no difference functionally but technically the application connects to the ECC system using JCO to execute all the RFC enabled function modules.
Warm Regards,
Sumit

Data Replication Between Sqlserver and Oracle11g using materialized view.

I have Sqlserver 2005 as my source and oracle11g as my target.I need to populate the target daily with change data from source.
for that we have created a dblink between sqlserver and oracle and replicated that table as a Materialized view in Oracle.
problem we are getting here is Fast refresh option is not available.each day it will pick full data from the source.
is there any way to use Fast refresh in this scenario??
Thanks in advance.
Regards,
Balaram.

Pl do not post duplicates - Data Replication Between Sqlserver and Oracle11g using materialized view.

Data streaming between server and client does not complete

Using an ad-hoc app, data streaming between server
and client does not complete as it supposed to be.
The process runs well in solaris 5.8, however under 5.9
we have found the characters stream buffer length limitation
is around 900 to 950 characters (by default we are using 3072
characters).
Example:
- We are transfering HTML file, which will be displayed
in the App client, with buffer=3072, the HTML only displayed / transfered
as xxxxxxxx characters, but with buffer=900 the HTML is displayed properly,
in this case, the only problem that we have is the file transfer will
eventually longer than usual.
- There is another case, where we have to transfer information (data) as stream
to the client. A long data stream will not appear at all in the client.
Any ideas why the change between 5.8 and 5.9 woudl cause problems?
The current app-driver that we are using is compiled using Solaris 5.6,
if possible we would like to have use of a later version, which is compiled using Solaris 5.9, do you think this will probably solve our problem?
Thanks
Paul

Does this have anything to do with Java RMI? or with Java come to think of it?

Secure the file/data transfer between XI and any third-party system

Hi All,,
I would like to use to "secure" SSH on OS Level the file/data transfer between XI and any third-party system Run OS Command before processing and OS command After processing. right now my XI server installed on iSeries OS.
with ISeries we can't call the Unix commands hope we need to go for AS400 (CL) Programming. If we created the AS400 programm how i can call that in XI.
If any one have idea pls let me know weather it will work or not.
Thanks in adavance.
Venkat

Hi,
Thanks for your reply.
I have red some blogs like /people/krishna.moorthyp/blog/2007/07/31/sftp-vs-ftps-in-sap-pi to call the Unix Shell script in XI.
But as i know in iSeries OS we can write the shell script we need to go for AS400 programe. If we go with AS400 how we need to call that programe and it will work or not i am not sure there i need some help please.
Thanks,
Venkat

Data mismatch between 10g and 11g.

Hi
We recently upgraded OBIEE to 11.1.1.6.0 from 10.1.3.4.0. While testing we found data mismatch between 10g and 11g in-case of few reports which are including a front end calculated column with division included in it, say for example ("- Paycheck"."Earnings" / COUNT(DISTINCT "- Pay"."Check Date")) / 25.
The data is matching for the below scenarios.
1) When the column is removed from both 10g and 11g.
2) When the aggregation rule is set to either "Sum or Count" in both 10g and 11g.
It would be very helpful and greatly appreciated if any workaround/pointers to solve this issue is provided.
Thanks

jfedynic wrote:
The 10g and 11.1.0.7 Databases are currently set to AL32UTF8.
In each database there is a VARCHAR2 field used to store data, but not specifically AL32UTF8 data but encrypted data.
Using the 10g Client to connect to either the 10g database or 11g database it works fine.
Using the 11.1.0.7 Client to go against either the 10g or 11g database and it produces the error: ORA-29275: partial multibyte character
What has changed?
Was it considered a Bug in 10g because it allowed this behavior and now 11g is operating correctly?
29275, 00000, "partial multibyte character"
// *Cause: The requested read operation could not complete because a partial
//          multibyte character was found at the end of the input.
// *Action: Ensure that the complete multibyte character is sent from the
//          remote server and retry the operation. Or read the partial
//          multibyte character as RAW.It appears to me a bug got fixed.

Data sync between oracle and sql server

Greetings Everyone,
Your expert views are highly appreciable regarding the following.
We at work are evaluation different solutions to achieve data synchronization between oracle and sql server data bases. Data sync i mentioned here is for live applications. We are runnign oracle EBS 11i with custom applications and intending to implement a custom software based on .NET and SQL Server. Now the whole research is to see updates and data changes whenever happens between these systems.
I googled and found Oracle Golden Gate, Microsoft SSIS, Wisdom Force from Informatica....
If you can pour in more knowledge then it's great.
Thank You.

Most of the work involved has to be done through scripts and there is no effective GUI to implement OGG.However using commands is not vey togh and they are very intutive.
These are the steps, from a high level:
1.Get the appropriate GG Software for your source and target OS.
2.Install GG on source and target systems.
3.Create Manager and extract processes on source system
4.Create Manager and replicat processes on target system
5.Start these processes.
First try to achieve uni-directional replication. Then Bi-directional is easy.I have implemented bi-directional active active replication using Oracle DBs as source and target. Refer to Oracle installation and admin guides for more details.
Here is a good article that may be handy in your case.
http://www.oracle.com/technetwork/articles/datawarehouse/oracle-sqlserver-goldengate-460262.html
Edited by: satrap on Nov 30, 2012 8:33 AM

Integration between SRM and ERP in part of Business Partners

Hi all
Could we make integration between SRM and ERP in part of Business Partners if we use Standalone Scenario? Thanks

Hi
Any scenario, You have EBP system as well as you said you have ERP system too. so you can do BBPGETVD and pull the vendor records. Normally standalone system may not have ERP system. In standalone Your account payable system integrated with your EBP system.
If you want to create a vendors locally in SRM you can create local vendors via web BBPMAININT or BP in GUI.
regards
Muthu
Edited by: Muthuraman Govindasamy on Sep 10, 2008 9:14 AM

Remove RFC calls between SRM and ERP

Hi,
Did any of you ever worked on removing RFC calls between SRM and ERP systems?
Does SAP maintains a lost of these built-in RFC calls?
What are the known constraints to replace them by webservice calls ?
Thanks
Yann

Hi Yann,
There is nothing on the SAP database for SRM and the backend using webservice.
There is for connections to SRM catalog.
I haven't heard anything about plans to change this.
Hope this helps,
Kind Regards,
Matthew

Link Table between CRM and ERP

Hi Experts,
Does anyone knows the link table between CRM and ERP for Contact Person (Buss Part) CRM and Contact Person ERP.
In my customer system, contacts are automatically duplicated in CRM.
When you make a change in ERP, this change is automatically done in CRM.
So I suppose that there is a table between the both systems to find the corresponding number...
Thank you for your help and hope my English is good enough to understand :o)
Best regards,
Luis.

Hi Micky,
Thanks for your answer.
Unfortunatelly, number are differents...
I move this question to CRM forum ;o)
Kr,
Luis.
This has been solved in this thread:
Link Table between CRM and ERP
Edited by: Luis Loredo Marino on Feb 24, 2010 1:24 PM

Data exchange between SAP SCM and an external java tool via JCo

Hi everybody,
the situation i am in is the following:
We are developping a java application for production planning using multi-agent systems. What I am currently working on is an integration concept towards SAP via JCo. I am using a SAP SCM System.
What i got is the following:
I got the JCo connection to SCM and I am able to execute BAPIs from Java.
Now my problem is the following:
We want to recognize a change in the SCM System, e.g. when someone added a new manufacturing order. What do I have to do for that?
Do I have to register a JCO.Server as a RFC Destination?
Do I have to use SCM EventManagement to handle the corresponding events?
In Java terms, what I want is a EventListener for some events - but neither do I know how the events are created nor how they are transferred to third party systems...
Anyone with a hint?
Thanks a lot!
Greetings
Jan

Hi Jan,
architecturally you will need to determine a point in the SCM application logic to understand that a relevant event has occurred and then issue a notification "message" - in your case it sounds like your system is directly coupled so it wouldn't exactly be a message but an RFC call instead.
On SCM itself all you need is the RFC-enabled function module interface (an ABAP development), a logical destination and a hook somewhere in the application logic to make the RFC call.
From a JCo perspective you then just have to implement an "RFC server" that responds to these RFC calls.
Most difficult part will be to find a suitable hook in the SCM application logic that doesn't modify any delivered SAP code but uses an enhancement technique like a BADI.
Anything you can share about your planned development? Is this specifically for a customer or are you planning on releasing a product?
Regards, Harry.

Data exchange between SCM and ERP

Similar Messages

Maybe you are looking for