Data Execution Prevention makes my iTunes shut down. SOS!

For no apparent reason, iTunes shuts down after about 1 minute with the message "data execution prevention has closed iTunes". I've looked online and tried everything. Help?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Similar Messages

  • When I start iTunes on my home computer (Not a MAC), it automatically shuts down, and gives me the message that the Data Execution Prevention security feature has shut it down...what to do?

    When I start iTunes on my home computer (Not a MAC), it automatically shuts down, and gives me the message that the Data Execution Prevention security feature has shut it down...what to do?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Itunes crashes as soon as I open itunes store. Also message: data execution prevention has closed itunes flashes up after itunes has closed??

    After the recent update of iTunes. Every time I try to open up the iTunes store it crashes iTunes, But I can play my music absolutely fine through my library. Also whenever I close iTunes a message saying 'data execution prevention has closed iTunes flashes up on my screen??
    Any ideas??

    Hey there KP187,
    Here is an article for you that will help you troubleshoot this issue with iTunes on your PC:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Why Might Data Execution Prevention Be Closing iTunes 11.2.0.115?

    I don’t own any Apple hardware and only use iTunes to listen to songs I purchased in the iTunes store that only work in iTunes. I started noticing problems when I updated to version 11.2.0.115 today. The “iTunes.exe” process remains in the “Processes” list of my Windows Task Manager for about 30 seconds after I exit the program. A balloon then appears in my taskbar saying Data Execution Prevention has closed iTunes. Windows Help and Support suggests seeing if a DEP-compatible version is available before turning DEP off for the program. I’m using Microsoft Windows Vista Home Premium Service Pack 2 32-bit. What, if anything, can I do?

    I fixed it on my computer.  Not sure which of the steps I did fixed it so I will list all of them.
    I wasn't getting the error until I did the following (to prevent it from just crashing on logging into the iTunes Store)
    https://discussions.apple.com/message/23987910#23987910
    I added C:\Program Files (x86)\Common Files\Apple\Apple Application Support; to the system variables PATH (depending on your operating system, your file path will be different).  How to do that has been outlined in the above linked article.
    This now caused DEP to freak out whenever I logged into the store and close iTunes.  Adding iTunes to the DEP filter didn't solve the problem.  So I removed all the saved system settings for iTunes and ran Apple Software Update.  I also went to the DEP and added every .exe I could find in C:\Program Files (x86)\Common Files\Apple to the exceptions list (again, depending on your OS the file path may be different.)
    To remove the saved system settings for iTunes you can find those in C:\Documents and Settings (for Win XP) or C:\Users (for Win 8).  Find a folder named AppData or Application data under various user names and remove any Apple related files you can.  I had one .log file that couldn't be deleted, but that shouldn't be a problem.

  • HT2292 Have upgraded to itunes 11.0.1.12 start itunes and it is closed, message reads I tunes closed to help protect computer, data execution prevention has closed itunes. windows Vista 32bit

    Have upgraded to itunes 11.0.1.12. Start itunes and it is closed with the message itunes closed to help protect computer data execution prevention has closed itunes. operating system is ms vista 32 bit. I have followed the procedures that I can find on the itune support site.

    You're welcome. Glad you got things sorted out.
    (No problem about not spotting the solutions ... the most common causes of this sort of message changes over time, so it's not straightforward to be able to tell when a given piece of advice still applies to the symptoms. Definitely worth posting to try to get a current heads-up on the likely contemporary causes of a particular error message.)

  • HT203163 All of a sudden I'm getting  a message Itunes has stopped working Data Execution prevention has closed Itunes what is causing this now, never had an issue until yesterday

    All of a sudden I'm getting a message Itunes has stopped working Data Execution Prevention has closed Itunes. What is causing this now, never had an issue until yesterday

    please sombody help me, apple support are no help, the shop are no help, the only thing i havent tried is delete everything on my laptop and put it back to factory, which is my very last resort

  • HT1527 Can't open iTunes...windows connectivity test says that iTunes has stopped working -  Date execution prevention has closed iTunes.   What do I do now?

    I can't open iTunes...Windows connectivity test says that iTunes has stopped working....Date execution prevention has closed iTunes.  

    If you update your QuickTime Player to the latest version, does that clear up the DEP errors in iTunes?

  • HT201413 suddenly itunes will not open and I get a message that the "Data Execution Prevention" is blocking itunes from opening....why????

    itunes will not open and I get a message that the "Data Execution Prevention (DEP)" feature in Windows is preventing it from opening. (this is after I've been using itunes for years???? If I try to manually deselect itunes from the DEP filter, of course I get a message that itunes cannot operate without the DEP active...another Catch 22 from the evil program designers....

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • HT1222 "Data Execution Prevention" not letting ITunes launch. How do I remove DEP?

    How do I get rid of Data Execution Prevention!!!??? All of a sudden this annoying little program wont allow me to open Itunes!! I tried turning it off the way they said to but it still blocks itunes. I even reinstalled Itunes No luck  I still cant use Itunes  HELP!!!

    And no problem for "barging in"; your expertise in solving Windows issues is always welcome. Cheers.
    Thank you.
    The situation with these changed up a bit with the introduction of the iTunes 10.5.x versions and above. (A "new problem wearing old trousers" event.) I have a note in the Full Host Bar about it, though it's speculative. Here's the content of the post there:
    There's various possible causes for DEP errors when launching iTunes for Windows. But in recent times we've been able to get past a number of them by updating folk's QuickTime Player to the latest version. For example:
    Re: When I tried to update to 10.6.3 it failed
    The interesting thing about that is that since iTunes for Windows 10.5.x, you aren't supposed to need QuickTime for Windows componentry to be installed in order for iTunes for Windows to launch. So it's not likely that the DEP errors are being caused purely by the lack of QuickTime componentry on the PCs in question (or by the lack of new-enough versions of QuickTime componentry on the PCs in question).
    One putative mechanism for what's going on.
    I've noticed (in the course of other experimentation) that if the QuickTime Player is uninstalled on an XP system and iTunes for Windows (some version post 10.5.x) is launching, I can get a message saying that certain kinds of content can't be played because QuickTime isn't installed.
    So there's a task performed by iTfW when launched to check on the presence of certain types of QTfW componentry. If the answer is "that componentry is not present", a routine is run that shows the dialog saying that certain content can't be played.
    It's plausible that Data Execution Prevention is interpreting the routine that produces the dialog as being a malicious act on some systems, and throwing the DEP error when the routine is run.
    That would explain why updating (or possibly installing) the latest version of the QuickTime Player is getting people past the DEP errors. The check for QTfW componentry is run when itunes launches, but it determines that the componentry is present. So the routine that produces the dialog isn't run, and Data Execution Prevention doesn't feel compelled to throw the DEP error.

  • Data Execution Prevention on Twain Network Scanner

    Hello users
    I try to scan with a Twain driver to a Lanier scanner. The driver supports Vista. Scanning used to work perfectly on XP. Now under Vista I get the Data Execution Prevention (DEP) message which shuts down the Acrobat 9.0.0 Pro. Scanning with "Microsoft Office Document Scanning" works well.
    What can I do except disabling DEP?
    Tank you a lot for your help.
    Best wishes
    Roberto

    Perform the following steps and itunes should be good to go again
    Remove iTunes and related components from the Control Panel
    Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
    iTunes
    QuickTime
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    THEN REINSTALL THE ITUNES

  • Data Execution Prevention shutting down iTunes even with exception added

    Well, was having this problem, it miraculously fixed itself for like a day but now it is happening again. Data Exectuion Prevention for Windows keeps shutting down iTunes. I have gone into the DEP settings and added an exception for it to not apply to iTunes but it is still happening every time I open iTunes. Today I downloaded and installed the new version of iTunes, hoping that would make a difference, but it is still happening. Also, since I installed that version about an hour ago, iTunes keeps opening itself without me telling it to--every five minutes I see it opening without me doing anything and then immediately being closed by DEP. I am getting very frustrated. Thanks in advance for any help.

    I had the same issue after my recent update of iTunes.  I didn't update Quicktime 'cuz I don't use it much (or at all).  On another thread discussing the same issue, I saw that the Quicktime installation can affect iTunes.  So I downloaded the latest Quicktime, installed, redooted - issue fixed (for now). 

  • DEP (Date Execution Prevention) Closed iTunes due to security reason

    I just bought a new laptop (SONY SR) operated with Window Vista. My laptop never run iTunes since I installed it. I tried uninstall and reinstall again n again, but it just doesn't work.
    A screen appeared and say that iTunes stopped working, DEP (Data Execution Prevention) has closed iTunes due to security reason.
    How do I off that "DEP"? Thanks!!!

    Hi, I just got this problem solved. Hope it helps.
    You don't have to turn off DEP or reinstall any program.
    The only thing you need to do is associate your Quicktime files ONLY to QuickTime player.
    When you open QuickTime it will automatically pop up a window to ask you if you want to fix file association. The answer is positive of course.
    If it still doesn't work maybe you could uninstall some codec / media players which associate with QuickTime files.

  • Data Execution Prevention?

    I just recently downloaded and installed the latest version of iTunes. When I close the program I get a warning "Data Execution Prevention has closed iTunes". What is this and how do you fix it. I have already reinstalled iTunes and that didn't work. I am running Windows Vista and have had no trouble with previous versions of iTunes.

    In a nutshell, the last version of iTunes that was fully compatible with 32-bit Vista was 11.1.5, which can be downloaded from oldapps.com. (If you are running 64-bit Vista, then you might have to roll back even further). Or you can ignore the DEP notifications and hope that Apple will eventually issue an update that was actually tested on Vista. (Do not disable DEP!) If you would like to read a long thread about this issue, see Windows Vista problem reports after latest Itunes 11.2 update .

  • Windows keeps shutting down iTunes because of Data Execution Prevention. is there a DEP version of iTunes?

    My iTunes program keeps shutting down shortly after loading.  I get an error from Windows stating that a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Then I get a message that states iTunes was closed because of Data Execution Prevention.  It states to find a version that allows DEP or change your DEP settings.  I uninstalled and reinstalled iTunes, but still have an issue.  Does anyone know how to fix this so that I can use iTunes?

    My iTunes program keeps shutting down shortly after loading.  I get an error from Windows stating that a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Then I get a message that states iTunes was closed because of Data Execution Prevention.  It states to find a version that allows DEP or change your DEP settings.  I uninstalled and reinstalled iTunes, but still have an issue.  Does anyone know how to fix this so that I can use iTunes?

  • Itunes shuts down because of Data execution prevention on windows?

    I open itunes, and about 5 seconds later it shuts down and has a "Data Execution Prevention-Microsoft Windows" window, and it says Windows has closes this program to protect my computer. Help?

    Hello, ollieallen.
    I am unsure what operating system you are running so I am going to include articles for Windows XP and Vista, 7 and 8.  Completely uninstall all components of iTunes and then reinstall the program. 
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    http://support.apple.com/kb/HT1925
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    Cheers,
    Jason H.

Maybe you are looking for

  • Percentage calculation and zero amount entries get dvision by zero error

    Hello, i am calculating the total of a field and then reporting the contributions of that line entry in percentage form but when a line has a zero amount i get an error of 'division by zero'.  I'll give some explamples below incase i'm not explaining

  • Oracle forms 11g running forms on internet explorer error

    Hi , this is abhishek I am new to oracle forms 11g . My question is that when I run the forms 11g on internet explorer it shows an error . The error is too many tries. first I like to clarify that before running the forms i start the weblogic server

  • Bluetooth problem connection between 2 Mac

    I'm trying to connect by Bluetooth my iMac 10.5.5 to my Powerbook G4 10.4.11 - If I check the Bluetooth system preferences, I can read "matched -> yes; Configured ->yes ; Prefered -> yes ; Connected -> NO ; serial port -> yes . MY PROBLEM is they don

  • After upgrade Flash Player not working.

    I have tried to upgrade to the newest flash player twice now and both times it has failed to work. I am running MacOS 10.5.8 and all browsers are current. I have tried to disable the hardware acceleration Setting but the Settings dialog doesn't appea

  • Base language mismatch

    I am in a process of migration from OWB 10g to 11g. When i import mdl from 10g to 11g , OWB gives me a warning saying that there is a language mismatch and my 10g base lang is <en_US> and that of 11g is <en_GB>... So now i want to know how would this