DATA EXECUTION PREVENTION REFUSES TO LET IE LOAD FLASH PLAYER

when
i push the download and install now
button on the site,
the next page ie loads is the "cannot display webpage" one and quotes data execution prevention has shut it because it thinks theres a threat.
further investigation reveals that the application apparently "tried to use the memory incorrectly"
That's all i know, other than now i can't view very much motion footage on the internet that's actually worth looking at, and I need to find a good debugging system cos i'm sure my computer is full of bugs - often it sits ther doing nothing at all but it's cpu and cooling fan is revving like a bat out of hell
any ideas anyone, cheers

Download SpyBot S&D, update it then run it, then download Adaware, update it then run it, in that order.
Update your OS, update your browser, once done set browser security to default. In system make sure active x is allowed.
Then make sure you have the proper Flash plugins/addons.

Similar Messages

Firefox will not start I recieve error that Data execution Prevention will not let it start.

I am running Windows Vista home premium service pack one. I have never had a problem with firefox until 9-27-11 when upon clicking on the icon to open Firefox I got a windows error message saying that Data Execution Prevention has stopped the program from running. At certain times however, it will work. No other programs have been affected. It will not run in safe mode either.

You can try reinstalling Firefox. You can get the latest version for free, as always, at [http://getfirefox.com getfirefox.com]. Just install it over your current install. No data will be lost.
If that doesn't help, it's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author.
If the problem does not disappear when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone.

What to do when you get an error message about data execution prevention

i have windowsXP and i downloaded Itunes now that i try to open itunes i'm getting an error message about Data Execution Prevention. Please let me know what to do to be able to open itunes...

You came from the correct article. Here is what it has to say about that error.
Error 2, 4 (or -4), 6, 1000, 9006
Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.

HT201413 I have a Windows XP Home Edition computer. I recently attempted to upgrade iTunes to v10.7. It loaded and installed OK, but now it won't run. When I try to launch it, it gets aborted by the windows Data Execution Prevention software. Any ide

I have a Windows XP Home Edition computer. I recently attempted to upgrade iTunes to v10.7. It loaded and installed OK, but now it won't run. When I try to launch it, it gets aborted by the windows Data Execution Prevention software. Any ideas?

Yes, this did solve the problem. But I had some trouble updating QuickTime. It failed, with the installer complaining that it did not have the required permissions to install the files it needed in the program directory. I got it to work by telling it to install the files to another directory. All seems well now - Thanks!

HT1222 "Data Execution Prevention" not letting ITunes launch. How do I remove DEP?

How do I get rid of Data Execution Prevention!!!??? All of a sudden this annoying little program wont allow me to open Itunes!! I tried turning it off the way they said to but it still blocks itunes. I even reinstalled Itunes No luck I still cant use Itunes HELP!!!

And no problem for "barging in"; your expertise in solving Windows issues is always welcome. Cheers.
Thank you.
The situation with these changed up a bit with the introduction of the iTunes 10.5.x versions and above. (A "new problem wearing old trousers" event.) I have a note in the Full Host Bar about it, though it's speculative. Here's the content of the post there:
There's various possible causes for DEP errors when launching iTunes for Windows. But in recent times we've been able to get past a number of them by updating folk's QuickTime Player to the latest version. For example:
Re: When I tried to update to 10.6.3 it failed
The interesting thing about that is that since iTunes for Windows 10.5.x, you aren't supposed to need QuickTime for Windows componentry to be installed in order for iTunes for Windows to launch. So it's not likely that the DEP errors are being caused purely by the lack of QuickTime componentry on the PCs in question (or by the lack of new-enough versions of QuickTime componentry on the PCs in question).
One putative mechanism for what's going on.
I've noticed (in the course of other experimentation) that if the QuickTime Player is uninstalled on an XP system and iTunes for Windows (some version post 10.5.x) is launching, I can get a message saying that certain kinds of content can't be played because QuickTime isn't installed.
So there's a task performed by iTfW when launched to check on the presence of certain types of QTfW componentry. If the answer is "that componentry is not present", a routine is run that shows the dialog saying that certain content can't be played.
It's plausible that Data Execution Prevention is interpreting the routine that produces the dialog as being a malicious act on some systems, and throwing the DEP error when the routine is run.
That would explain why updating (or possibly installing) the latest version of the QuickTime Player is getting people past the DEP errors. The check for QTfW componentry is run when itunes launches, but it determines that the componentry is present. So the routine that produces the dialog isn't run, and Data Execution Prevention doesn't feel compelled to throw the DEP error.

TS1717 Data Execution Prevention - wont let me launch i tunes

Ahhh
Help me please. Have installed new update , Itunes 7, Itunes 8 with no luck.
Had this happen once and deleted and reinstalled I tunes 8 and it worked but not this time. Just ge the Data Execution Prevention pop up
Running Windowsa Vista

Okay. Next possibility,
Can you check something for me please? Is the QuickTime Player currently launching for you? Or is that also failing to launch (with or without an error message)?

Data Execution Prevention in Vista prevents itunes from running. WHEN IS APPLE GOING TO ADDRESS THIS ISSUE?

Is there no solution to this problem? The Windows site says keep checking the Apple site to get a version of iTunes that is compatible with the issues between the Data Execution Prevention in Windows Vista and any of the later versions of iTunes. Problem is, IT DOESN'T SEEM THAT APPLE REALIZES THERE IS A PROBLEM THAT NEEDS TO BE ADDRESSED. If there is a solution, or a patch that can be downloaded, or anything, I would really appreciate knwoing about it. The last time I had this problem was when I updated to iTunes 10.0. It took most of 3 weeks to figure out a fix for that. Now, I have a new phone, and it will not sync unless itunes 10.5 or later is installed. I tried updating to that, and now I'm back to square one with the DEP problems. Please help!!!! thanks!!

OK, lets do a complete overhaul to make sure it's working ok.
First to check your Windows system file for any corruption:
Go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
type in
sfc /scannow
let Windows fix any system files that need to be repaired.
Restart the computer.
Start iTunes and see if it is ok.
If it doesn't, will have to go through the whole process of uninstalling and installing acccording to the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
(Referenceinstructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components)
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

Windows keeps shutting down iTunes because of Data Execution Prevention. is there a DEP version of iTunes?

My iTunes program keeps shutting down shortly after loading. I get an error from Windows stating that a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Then I get a message that states iTunes was closed because of Data Execution Prevention. It states to find a version that allows DEP or change your DEP settings. I uninstalled and reinstalled iTunes, but still have an issue. Does anyone know how to fix this so that I can use iTunes?

My iTunes program keeps shutting down shortly after loading. I get an error from Windows stating that a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Then I get a message that states iTunes was closed because of Data Execution Prevention. It states to find a version that allows DEP or change your DEP settings. I uninstalled and reinstalled iTunes, but still have an issue. Does anyone know how to fix this so that I can use iTunes?

Error when opening PowerPoint related to Data Execution Prevention Mode

I am experiencing an error when attempting to open a PowerPoint file. . Here is the full message: "powerPoint is experiencing a serious problem with PowerPoint com add in. This add-in is incompatible with Data Protection Execution Mode and should be disabled or upgraded to the latest version. Do you wish to disable?" I am using PowerPoint 2010 and Adobe Presenter version 8.

I've continually experience the same issues. I have updated to Presenter 8.02.
If I open a project by double-clicking the .pptx file I get the following error message:
"Run-time error '-2147467259 (80004005)
SlideShowWindow (unknown member) :Invalid request. Automation rights are not granted."
If I then enter the Presenter tab and click an option (for instance "Settings") Powerpoint crashes and restarts itself. Once restarted the following error message is presented:
"PowerPoint experienced a serious problem with the 'adobe presenter powerpoint com adding' add-in. This add-in is incompatible with Data Execution Prevention mode and should be disabled or upgraded to the latest version. Do you wish to disable this add-in from loading?"
I can often crash Powerpoint with the same DEP warning by closing the presentation with the window's "X" button - Powerpoint restarts itself and gives the same DEP warning as above.
I normally choose to not disable and continue working. If I then go to "Settings" in Presenter again, it will open without problem. It seems that after four to six occurences like this, Presenter will then be disabled by Powerpoint and require resetting in the File-Options-Addins section.
Alternately, if I open Powerpoint first and then open my project through the File-Open or Recent Presentations list I do not get the Run-time error mentioned above and usually can open a Presenter option ("Settings") without crashing Powerpoint. I can also close the project without incedent if I use the File-Close menu as opposed the the "X" button.
I am running Win 7 64bit, Powerpoint 2010 32bit with Presenter 8.02.
Sincerely hoping support is continuing to monitor these threads, as this one was started in November without much response.

Any Time I Open iTunes My Computer Comes Up With A Message Saying "Data Execution Prevention - Mircosoft Windows To Help Protect Your Computer, Windows Has Closed This Program" We Have Trend Micro Internet Security Titanium.

Any Time I Open iTunes My Computer Comes Up With A Message Saying "Data Execution Prevention - Mircosoft Windows To Help Protect Your Computer, Windows Has Closed This Program" We Have Trend Micro Internet Security Titanium But It Appears To Be Windows Stopping iTunes.

Right click My Computer > Properties > Advanced > Performance: Settings > Data Execution Prevention > Add iTunes to be let through

Itunes error. the data execution prevention pops up and says "to protect your computer, windows has closed this program. Data execution prevention helps protect against damage from viruses and other threat.

I have a windows Xp computer. and i needed to download the newest itunes to support my ipod touch. but now my computer doesn't let me open itunes. The the data execution prevention pops up and says "to protect your computer, windows has closed this program. Data execution prevention (DEP) helps protect against damage from viruses and other threat." I tried excluding itunes from DEP on settings but it still doesn't work. I don't know what to do. please help me!!!
thanks

try to select the computer cd/dvd autorun off.
I had the same problem, then Kaspersky software found a conflict suggesting me this solution.
Itunes now works...even if it always asks to set the cd/dvd autorun on when lunched.

Data Execution Prevention stops quicktime playing.

I can't get quicktime to play at all, every time I try Data Execution Prevention stops it.
I have tried to turn off DEP for quicktime but it won't let me.
I have uninstalled and reinstalled both quicktime and i tunes, also removed any Codec Packs I had installed,( I read to do this on another forum).
Still windows won't let quicktime play, either stand alone or on the net.
I am running Windows Vista.
Thanks for any help in advance.

Just to say "me too".
Fresh copy of Vista, fresh download of itunes & quicktime, installed - quicktime won't start because of a DEP, uninstalled & reinstalled - the same, cannot turn off DEP for Quicktime.

Can't open itunes due to data execution prevention error

I am currently unable to open itunes due to a data execution prevention error. I have tried to clear temp files, uninstall and reinstall and nothing seems to work. I tried to disable DEP for itunes but nothing seems to work. Can anyone help me?

Try the following, one at a time:
1. First Repair QuickTime. START/CONTROL PANEL/ADD OR REMOVE PROGRAMS/highlight QUICKTIME, click REMOVE, then select REPAIR.
Now test your itunes and see if you still have this problem
2. If you have Codec installed, please uninstall it and test out your iTunes.
3. If all that fail, scan your system for possible Windows system file corruption:
Go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator" (for Win XP-just click command prompt)
type in
sfc /scannow
let Windows fix any system files that need to be repaired.
Restart the computer if it did actually repair any files.
Open iTunes and see if problem resolved.
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
http://support.microsoft.com/kb/310747

Problem with Windows Data Execution Prevention

Hi. I'm running Safari 5.1.2 on Windows Vista Business. Whenever I try to print a web page (any page) Windows reports a Data Execution Prevention and closes Safari. I can always print the same web page from IE, and I can always print to PDF. How do I fix?
LATE ADDENDUM: Now it won't let me print to PDF either. I will have to stop using Safari - which would be a great pity as it syncs bookmarks so well to my iPad and iPhone

I got this from someone.
Acrobat X not printing
I purchased Acrobat X several months ago and initially expereinced no problems printing. For the last week or so, I am unable to print PDF documents from Acrobat X. I can print successfully from any other program on my PC. I can also print successfully from Adobe Reader. However, when I open up the same PDF in Acrobat X, I click on print and select the defaul printer, a dialog box says my document is printed but nothing prints. The printer queue for the selected printer is blank.
Eldin Rammell 7 days ago
Voted Best Answer
Please refer to the article:http://kb2.adobe.com/cps/928/cpsid_92870.html
Rohit Anand answered 7 days ago | Comments (5) | New Comment | Report

I have been trying to work on my homework all afternoon, via NAU's blackboard system. I am continuously getting booted out of the system, with an error stating "Data execution prevention". How can I prevent this from continuing?

I have been trying to work on my homework all afternoon, via NAU's blackboard system. I am continuously getting booted out of the system, with an error stating "Data execution prevention". How can I prevent this from continuing?

If you are wondering why you are not getting any responses, it is because you have vented a complaint without any details that make any sense or give anyone something to work on.
If you want help, I suggest actually detailing what has happened, with versions of software etc. Anything that would let us assist.
As a start I am guessing that you have not really got the hang of "How it all works". Firstly download the Pages09_UserGuide.pdf from under the Help menu. Read that and view the Video Tutorials in the same place. A good addition would be the iWork 09 Missing manual book and something to help you learn how to use your Mac.
If there are specific tasks you need help with:
http://www.freeforum101.com/iworktipsntrick/index.php?mforum=iworktipsntrick
Is a good resource.
Peter

DATA EXECUTION PREVENTION REFUSES TO LET IE LOAD FLASH PLAYER

Similar Messages

Maybe you are looking for