Data extraction after upgradation

Hello All,
iam suppose to do testing data flow after upgradation and iam new to this please experts correct me i am wrong what i understand is there some R/3 programm's which need to be triggered manually which in schedule the job and event collector in BW collects the data .Before that we need to intialize the delta process from infopackage and after job is triggered by programe i need to run delta process.iam not sure whether this is way it works.please confirm and suggest me if iam wrong.
Thanks & Regards
Priya

Hi Priya,
You have to clear all the delta queues and unschedule all the process chains before starting the upgradation to BI7 .
And after upgradation reschedule the process chains and pull the deltas and full loads. Initialize the delta before loading the deltas also check the same in RSA7 in source system. Also execute all the reports required.
Also check these links:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bi/bi%2bupgradation-helpful%2boss%2bnotes%2bfrom%2bedw%2bperspective
Effect on BW of R/3 Upgrade
BI 7.0 Initial Hurdles
Bw 3.5 upgrade help
Hope this helps............
Rgs,
I.R.K

Similar Messages

Why has my ipad lost connectivity to the AT&T cellular data network after upgrading to iOS 8.1.2? My iPad is model #MD367LL/A, 32 GB WIFI + Cellular, about 2-1/2 years old.

Why has my ipad lost connectivity to the AT&T cellular data network after upgrading to iOS 8.1.2? My iPad is model #MD367LL/A, 32 GB WIFI + Cellular, about 2-1/2 years old. It;s been working perfectly up until now. I have no problem on my home WIFI, or through personal hotspot working through my iPhone 5.
I have worked with AT&T, replaced the SIM card with a new one, and done a backup/restore to factory settings, all with the same result that when I turn Cellular
Data on, with or without Enable LTE, it goes into "searching" mode, or reports "no service". My iPhone 5 works perfectly on iOS 8.1.2, on Cellular. I've browsed the blogs and have tried Apple's suggested fix, all to no result.
Oddly enough, every once in a while I do get connected to the network for a short ime (minutes), but it always returns to "searching".
I've filed a report with Apple, along with a request that they contact me, but no results yet.
Help? (and thank you).

Hello razmee209. Thank you for your response. I spent the better part of yesterday working with Apple Support. They tried their best, to include backing up photos to my HP laptop, backing up the iPad to iCloud, then resetting the iPad in total. Same problem. I restored from the cloud to recover my apps, same problem.
AT&T installed a new sim card - same problem. I spent time with AT&T Support yesterday, too. In both cases, (Apple and AT&T) the support techs who worked with me were extremely polite, courteous and helpful to the best of their abilities, but I think the problem lies deeper, and nobody at Apple is admitting they have a problem with iOS 8, that I'm aware of.
I didn't have this issue before I upgraded to iOS 8.1.2.
Everything else with the iPad works fine: WIFI, Personal Hotspot, email, all my apps, etc.
In browsing the web for this issue I see that many other folks have the same problem. I filed a report with Apple this morning, requesting that they contact me, but no word yet. I was going to go to iPhone 6, and had been considering the iPad Air 2, but I see reports of this problem with those units as well.
At this point I don't think I'll be spending any more money with Apple, at least not till this issue is resolved.
Thanks again for your response and suggestions.

Meta dates in AlbumData.xml (date problems after upgrade)

HI folk,
Further to my post earlier today about the date mashup after upgrading, I was wondering if a [careful!] edit of the AlbumData.xml file might help.
If I knew what these fields meant I might be able to work out what to do...
<key>DateAsTimerInterval</key>
<real>9850139.000000</real>
<key>ModDateAsTimerInterval</key>
<real>206299947.507982</real>
<key>MetaModDateAsTimerInterval</key>
<real>206299831.664670</real>
Which one (if any of these) does iPhoto use when deciding what order to display the photos in? And what are the numbers? Seconds since 1984? Picoseconds since the Woz left the company? Curious minds want to know.
And yes, I'd use a backup for experimentation.
Rob

Rob,
That timestamp is probably based on the [Unix Epoch|http://en.wikipedia.org/wiki/Unix_time], the basis for almost all time stamps in programs based on Unix and/or the C programming language. If those dates are in fact based on the Unix epoch, they are based on the number of seconds since Jan1, 1970.
Sometimes such dates are represented as integers (like DateAsTimerInterval seems to be) and sometimes they are represented as floating point numbers (like the other two) in an attempt to circumvent the Year 2038 problem.
You may find this useful: [http://www.unixtimestamp.com>
Personally, I would love to find out how your experimentation goes - what fails and what works; if you have to go through any hoops to get iPhoto to recognize your changes; if exporting a photo changes its EXIF timestamps after you play with the XML file, etc.
nathan

BACK UP DATA MISSING AFTER UPGRADE

Hello again
I am posting again my problem , maybe this time I can get some more help..
I was using an older Itunes and 4.1 os on Iphone. I backed up iphone and restored it (TWICE) to check for data and eveything was there, after upgrading Itunes and OS to 5.0.1 , I tried to restore from the Previous Backup but lots of data was missing (contacts, pix,videos,songs,passwords) . What happened here ?
I found 4 backup folders with dates : 20/jan/2012 (1 folder ) , 23/jan/2012 (2 folders) and 26/jan/2012 (1folder) <---date of upgrade.
(I forgot to mention that when i was upgrading the OS , I wasn't prompted to do anything by Itunes, Itunes upgraded and backed up the phone automatically.)
I looked inside those folders and found out that the folders from 20/jan and 23/jan contain identical info. but the one from 26/jan is different !!!!!
1)does that mean that the original backed up info is still there but not ported over to the new OS ?!!!
2)Is there anything in particular that I should look for in the backup folders ?
3)assuming the original backed up data is still there , how do we make sure it is completely transfered to the new OS ?
Regards

That sounds like a more complicated problem within PC Suite...Maybe you should contact Nokia directly to see if they can come up with a solution for this.
www.europe.nokia.com/contactus
There you´ll find a detailed selection of your country.
Don´t forget to keep us informed on this!
By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
The day we stop improving is the day we stop being good.

Lost data connectivity after upgrading iPhone 4 to iOS 5. How to fix?

Hello,
I upgraded my 16GB iPhone 4 yesterday from iOS 4.3.5 to iOS 5 and everything went fine after a few failed connections to Apple's servers, however my phone lost the data connectivity completely. Phone and SMS worked fine, I could also connect through wi-fi with no problems, however whenever I tried to use data I got a message that my phone was not signed to an internet service.
I restored my phone from the backup after upgrading. Not successful. I also reset the network configurations. No deal.
My carrier is Vivo (Brazil) and everything worked fine prior to the upgrade (and after the downgrade).
I imagine it can be a problem with APN configuration under iOS 5 and I tried to configure it through a webpage, but I got a message that my phone already had a APN config (profile) and could not install another. Under Settings>General>Network I don't have the "mobile network option" nor the "profile" option.
Any thoughts? So far I haven't contacted other people under my carrier who upgraded to see if they had the same problem.
Thanks for reading,
Samuel

I got a workaround; it's not what I wanted, but it solves the main problem.
I noticed that I only lost data connectivity after restoring from backup after the iOS 5 update. So what I did was to backup my phone, restore again to iOS 5, configure as a new phone and backup again (with nothing in the phone).
Then I launched an iPhone backup utility software, in this case, iBackupBot, which in the trial version is enough for what I wanted. I opened the old backup and exported only the files I wanted (like call history and SMS history), then I imported these files into the new backup and restored from it.
I lost my media files (which I copied before) and some configurations, but the most important itens, like SMS, I managed to export from the old (complete) backup.
Message was edited by: samuelsam

Can't read data CDs after upgrading to 5.0

After upgrading to 5.0, I can't read data CDs I've already made from any other programs. When I try to open one, Windows Explorer shows D: drive with no folders or files at all, and 0 bytes used/0 bytes available. I can still play DVDs and audio CDs. iTunes 5.0 opens fine on pc, and I can access/play music, but doesn't recognize my iPod or iPod mini. I'm afraid to download anything else until I get this problem fixed. HELP - please
I've used System Restore to go back to earlier version, and that lets me view/use CDs, but I can't open iTunes - message says some files missing, reinstall iTunes. I've tried to uninstall iTunes through add/remove, but the install shield disappears after starting.

hi Jeanne!
Problem is obviously a software conflict, but I'm lost on how to fix it. And it's getting tiring installing upgrade to use iTunes, then going back to System Restore in order to back up data from other programs - plus I can't believe that's the best thing to do for the pc.
gaah. okay, the fact that a Syetem Restore gets your CD drives back suggests it's a registry issue, and also that we're either getting a conflict with other installed non-MS burning/ripping software
b or
(unfortunately), there is a problem showing up related to such software that you've
b previously uninstalled,
but which has left behind some peculiar registry entries.
so let's try attacking both the ghosts of software present and past.
(1) what other burning/ripping software do you currently have on your PC? can you go into your "about" screens in the packages to let us know the precise version name and number? (the decimal points do make a difference, i'm afraid.)
(2) here are the standard MS troubleshooting documents on CD drive problems. it might be best to start with the
b burning
KB doc, because that has probably the best information/links on the conflict issues:
http://support.microsoft.com/default.aspx?scid=kb;en-us;324129
http://support.microsoft.com/kb/321641/
http://support.microsoft.com/kb/314096/EN-US/
keep us posted.
love, b

Master data text after upgrade to NW700 SPS15 (SP17 for SAP_BW)

Basically all the Technical Names with an Underscore _ are replaced by $ symbol.
This issue as depicted here under appeared after the upgrade from BW3.5 to BI7.0, all Master data texts with Underscore __ appears as $
Before upgrade     After upgrade
YACCOUNT___T     YACCOUNT$T
YCHRT_ACT___T     YCHRT_ACT$T
Any body faced this problem.
Regards,
Giridhara

Anyway. I opened a oss message with SAP and they confirmed that RSA1OLD don't work but can only work with RSA1. The problem is at RSA1OLD and when you check dataflow in RSA1OLD, it gives error, while in RSA1, it works. SAP is working on this. Assume that they would correct it later.
Regards,
Giridhara.

All data lost after upgrading

I lost all data after upgrading my iPhone 3G to iOS4. I was able to recover only the information that syncs with mobileme, everything else was gone, in all apps: bank accounts, passwords, notes, games, settings, etc -everything
I already restored and restarted, even used time machine, nothing seems to work. Any help?

I am trying to update to the newest software, and get a warning that i need to save/transfer new purchases to my library. I know the last time i did this update i went with continue, and as the others in the posting have indicated lost information. It didnt matter to me at that time, but now that I have more info to lose, i dont want to do it, so the other option on it is to do as it asks. But, I am having a hard time doing that. I have done what they have asked by going to file and transferring, but, it doesnt seem to be working. As i continue to get the same warning. I am not going to update this till i get the answer to do it properly this time. But, want to know why it doesnt want to transfer the info that it requires, for me to continue on. I think this is why the others in the thread are losing their info.

All data deleted after upgrade to iOS8

I am deeply sad. All data has been deleted after upgrade to iOS8.
What I did:
1. Connect ipad to PC to transfer records from voice recorder.
2. iTunes offered to upgrade system.
3. I confirmed.
4. Some unknown error occured in the end of upgrade process.
5. When iPad started, iOS8 was there. All data disappeared.
6. I am sad. All valued data I need is lost... (no backup has been done before upgrade).
Pls advice is it possible to get data back.

Yes. I did backup.
But don't know how to get it.
Actualy, all I need is 2 records from Recorder programm. Before upgrade I downloaded records from itunes; screen → http://joxi.ru/caQdVIwyTJDKAjTtsuk
Now it is empty, no records.
I see that backup of this programm data available in storage. But don't know how to get it from there; screen → http://joxi.ru/taUdVP3JTJAaYtIkBaI
By the way iTunes tells me that backup copies available for today only → http://joxi.ru/7KUdVP3JTJBAXfQZjgI

Sticky Brain data lost after upgrade to 10.4.4

Sticky Brain can't locate my data file after the upgrade to 10.4.4 and neither can I. Can someone tell me where it might be moved to during that process?

I can't tell you where it might have moved to but in my case, using 4.0.3 the default backup file is here- HD/Users/yourname/Library/Application Support/Chronos/Backups

Restoring data back after upgrade

Hi I am planning to sell my 4s & buy a iPhone 5,I want all my data including photos and music to be restored back in my new phone.
I have iTunes back up in my computer.can any one tell me the procedure?
Will I loose any data during this upgrade.my phone runs in ios6 now

Backup up your current phone, the restore your new phone to this backup when you set it up, as explained here: http://support.apple.com/kb/HT2109. The backup won't contain your music and other iTunes media; you'll need to sync your new phone with iTunes to transfer this. Be sure to sync your contacts with iCloud (Settings>iCloud>Contacs>On) as they aren't always recovered when restoring to your backup.

InfoPackage error for Hierarchy data loads after upgrading to BI 7.31

Hi All,
We have recently upgraed to BI 7.31 from BI 7.01. After the upgrade we are observing info package error while loading the Hierarchy for 0BPARTNER infoobject, below is the long text for the error message.
Datasource name : 0BPARTNER_NAME_HIER
Error in the hierarchy structure: see error log
Message no. RH003
Diagnosis
The structure of the hierarchy contains errors. You can find a detailed description of the error in the log.
Procedure
Correct the error in the hierarchy structure as described in the log.
Screenshot for the Infopackage Details tab,
The error message suggests checking the error log, but there are no error logs to be reffered.
Please let us know if anyone have faced similar issue and help us resolving the same. Also let us know where to find the error log in such scenario.
We have already tried replicating the data source at BW side, but no success. We also checked the extractor at source system side and found it to be working alright.
Thanks & Regards,
Viraj

Hi Viraj,
Did you find a solution for your problem ?
Even am facing the same issue .Process chain is running fine without throwing any errors but if i try to run manually it getting failed.
when we check the data few of the nodes are not getting reflected which are maintained in source.
Error Message : Error in the hierarchy structure.
Source system : Extraction check performed and the record count is matching. We took the dump of data and where able to find the required data but in the maintain hierarchies it is not getting reflected
Could you please help me in the solution.
Thank you
Regards,
Madhav

How can I get my data back after upgrading my iphone 3gs to ios 4?

Surely Apple isn't just standing on the sidelines after people have lost their data by upgrading to IOS 4.2?

There is no reason to have lost data by upgrading to 4.2. We are on 4.3.3 now, by the way. Are you regularly syncing and thereby backing up?

X10 not connecting to mobile data networks after upgrade to Android 2.3

My X10 does not connect to GPRS / EDGE / 3G / HSDPA after the upgrade to 2.3. Wifi is no problem, though.
I used the SIM card in another X10 with Android 2.1, no problem, got an HSDPA connection. And yes, all the boxes are checked: "Data Enabled" and "Data Roaming";
I had problems before the upgrade to connect to data networks when roaming, but never in my home network. Now, it doesn't seem to work at all.
Any advice?

go to settings -> sony ericsson -> data download
or
settings -> wireless & networks -> mobile networks -> access point names -> MENU -> add New -> enter the APN info -> MENU -> Save
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Data Discrepancy after upgrade

Hi All,
We have got data discrepancy problem.
Before starting Upgrade we have taken System copy from BW Production system to New BI Sandbox say on 30th of May. After the successful upgrade, yesterday I have noticed that there is discrepancy in December 2008 for only for Cost Elements, most of Queries showing discrepancy in only December 2008.
Any idea on where could be the issue is? I have checked at InfoCube of Old and New system, have compared the no of requests also, everything is same. At Cube level also there is discrepancy.
Please let me know where are the places I need to look into?
Please help me out in this issue.
Regards,
Kiran

Debug the transformation where it is distracting from the original business logice.Might be some routine or some conditions causing this discrepancy

Data extraction after upgradation

Similar Messages

Maybe you are looking for