Data extraction error
Dear gurus,
I'm using 0CRM_SRV_PROCESS_H data source to extract data . In source system using RSA3 ,i can see 7 records are available but when i extract through BW , system returns that there is no record in source system.
How to resolve this
Thank you
BR
Hi Saravanan,
Apart from wht other frnds have mentioned.
1)Do a full load and Delta Load in the Infopak and check.
2)Check whether anything has been written in CMOD for this datasource,may be beacuse of this thngs are getting filtered and the data is not getting populated.
Rgds
SVU123
Similar Messages
-
Position Activity Sequence Resulting in data extracting error
hi gurus
can any body tell me what is this position activity sequence error resulting in data extracting error, plz help. this is very high priority for me.
regards
devI rebuild the report using a tabular form and populated the primary key with a PL/SQL expression and now it appears to be working. P1_ISSUE_NO is the primary key on the issue table and I could not figure how to get it in the issue_no field of the tabular report when a new line was entered I ended up putting the following code in for the default for
issue_no on the report:
Begin
return :P1_ISSUE_NO;
end
It works great. -
Hi Gurus,
We are doing HR data extraction with the following details:
Cube: 0PT_C01 - Time and Labor
data source: 0HR_PT_1 - Times from personal work schedule
Records in ECC: 15mill +.
"Init load with Data "is being loaded in packets of 40K records (400 packets approx).
Each time we load (we tried reloading after deleting data and reinit) it is loading same records. But it is giving the following error. Surprisingly this error is coming for different packets in different loads. for ex: 1st time packet 6...2nd time packet 58....3rd time 122 etc.....it keeps changing...
Processing end : Errors occurred
Error when generating the update program
Diagnosis
An error occurred during program generation for InfoSource 0HR_PT_1 and
InfoProvider 0PT_C01 . This may be extrapolated to incorrect update
rules.
Procedure
Check and correct your update rules and then generate the update program
again. You can find help on the error in the error log.
We reactivated and verfieid update rules. But no use.
Appreciate any kind of help.
thanks in advance.
J.Oscar,
Thanks for the help.
We tried the following one by one.
1. Delete and recreate update rules. To be frank....there is no CODING or complication in there...
It did not work.
2. Tried loading only to PSA. It loaded 15mill records perfectly. But when we tried updating target cube,
same story with many more errors.....earlier we had 10 packages failed out of 387.......
this time almost every alternate package is marked red and same error....update generating update
program.....
Hope somebody will come up with a solution. -
Hi Experts,
I am doing MAster Data Extraction, i have done with major works in R3 Side, but i am facing as issue while distributing the Mode,
Before that i brief the things what i have done,
1) ALE Configuration in ERP R3 System
2) Created a New Logical System for Receiver PI System
3) Created the Logical System for Sender R3 System & Assigning the Client
4) Configured of RFC Destination Pointing to PI System
5) Configured of Communication Port
6) Configurated of Partner Profile
7) Created ALE distribution Model/Customer Distribution Model
After creation of the Model i ahve added the Message type. Then Partner Profile needs to be generated and the Distribution model needs to be distributed from the Edit Menu.
But while doing the above step i am facing a issue as " No Messages have been defined for the selection conditions in the model".
Please do needful.hi,
if you''re a PI started I'd suggest:
http://www.sap-press.com/products/Mastering-IDoc-Business-Scenarios-with-SAP-NetWeaver-PI.html
chapter:
3 ... Master Data Distribution ... 95
for a good start
Regards,
Michal Krawczyk -
Adobe Form (data extraction error)
Hi Experts,
i'm trying extract data from PDF file. (Adobe Offline scenario).
I'm getting this XML runtime error.
could anybody can help me to solve this problem.
This is my code ,
CALL TRANSFORMATION id
SOURCE XML lv_xml_data_string
RESULT T_sums = wa_sums
customer = wa_cus
bookings = wa_book
connections = wa_conn.
Here is the error
>>>>>>>>>>>>>>>>>>>>>
Error analysis An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_XSLT_RUNTIME_ERROR', was not caught and therefore caused a runtime error. The reason for the exception is: Either the source document contains invalid XML or it is handled incorrectly in the ABAP program that called the transformation.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
i will appreciate valuble answers.
Thanks ,
Lahiru.Hi Experts,
i'm trying extract data from PDF file. (Adobe Offline scenario).
I'm getting this XML runtime error.
could anybody can help me to solve this problem.
This is my code ,
CALL TRANSFORMATION id
SOURCE XML lv_xml_data_string
RESULT T_sums = wa_sums
customer = wa_cus
bookings = wa_book
connections = wa_conn.
Here is the error
>>>>>>>>>>>>>>>>>>>>>
Error analysis An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_XSLT_RUNTIME_ERROR', was not caught and therefore caused a runtime error. The reason for the exception is: Either the source document contains invalid XML or it is handled incorrectly in the ABAP program that called the transformation.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
i will appreciate valuble answers.
Thanks ,
Lahiru. -
BW Data extraction error?
Hi
I am trying to do extraction from IDES ECC6 to BI ...when i run Infopackage my monitor is allways yellow status.
i ckecked in :
SM58: No service for system SAPPIS, client 800 in Integr ation Directory
Message no. SR053 ( IDOC_INBOUND_ASYNCHRONOUS )
SLDCHECk is fine
Source system connection check is OK
SM59 RFC connection is OK
This is first time i am doing extraction on this system am i missing any config.
Kindly help me!!!!
Thanks
BabuHi!
Got the same case. Solved.
The problem was the lack of authority of the user BWREMOTE in the source system for an object B_ALE_RECV with EDI_MES = RSRQST. The desired profile for the user is S_BI-WX_RFC. -
Error 8 when starting the extracting the program-data load error:status 51
Dear all,
<b>I am facing a data exracton problem while extracting data from SAP source system (Development Client 220). </b>The scenario and related setting are as the flowings:
A. Setting:
We have created 2 source system one for the development and another for the quality in BW development client
1. BW server: SAP NetWeaver 2004s BI 7
PI_BASIS: 2005_1_700 Level: 12
SAP_BW: 700 Level:13
Source system (Development Client 220)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: SunOS
Source system (Quality Client 300)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: HP-UX
B. The scenario:
I was abele to load the Info provider from the Source system (Development Client 220), late we create another Source system (Quality Client 300) and abele to load the Info provider from that,
After creating the another Source system (Quality Client 300), initially I abele to load the info provider from both the Source system , but now I am unable to load the Info provider from the (Development Client 220),
Source system Creation:
For both 220 and 300, back ground user in source system is same with system type with same authorization (sap_all, sap_new, S_BI-WX_RFC) And user for source system to bw connection is dialog type (S_BI-WX_RFC, S_BI-WHM_RFC, SAP_ALL, SAP_NEW)
1: Now while at the Info Package : Start data load immediately and then get the
e-mail sent by user RFCUSER, and the content:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
2:Error in the detail tab of the call monitor as under,
<b>bi data upload error:status 51 - error: Error 8 when starting the extracting the program </b>
Extraction (messages): Errors occurred
Error occurred in the data selection
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted (red)
bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
IDoc sent to SAP system or external program"
r<b>/3 side: status 51: IDoc: 0000000000012140 Status: Application document not posted
Error 8 when starting the extraction program</b>
Info IDoc 1 : Application document posted (green)
r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
IDoc sent to SAP system or external program"
bw side: "IDoc: 0000000000007089 Status: Application document posted,
IDoc was successfully transferred to the monitor updating"
Have attached screen shots showing error at BW side.
check connection is ok, tried to restore the setting for bw-r3 connection though same problem
Have checked partner profile.
<b>what's wrong with the process? </b>
Best regards,
dushyant.Hi,
Refer note 140147.
Regards,
Meiy -
'Error 8 occurred when starting the data extraction program'
Hello Experts,
I am trying to pull master data (Full upload) for a attribute. I am getting an error on BW side i.e. 'The error occurred in Service API .'
So I checked in Source system and found that the an IDOC processing failure has occurred. The failure shows 'Error 8 occurred when starting the data extraction program'.
But when I check the extractor through RSA3, it looks fine.
Can someone inform what might be the reason of the failure for IDOC processing and how can this be avoided in future. Because the same problem kept occurring later as well.
Thanks
Regards,
KPHi,
Chk the idocs from SM58 of source system are processing fine into ur target system(BI system)...?
Chk thru Sm58 and give all * and target destination as ur BI system and execute and chk any entries pending there?
rgds,
Edited by: Krishna Rao on May 6, 2009 3:22 PM -
R/3 SP Import:Open data Extraction requests Error
We are getting the below error when Basis doing the upgrade support packeage in R/3 source system.
Open Data Extraction Requests
The system has found a number of open data extraction requests. These
should be processed before starting the object import process, as
changes to DDIC structures could prevent data extraction requests from
being read after the import, thus causing them to terminate. You can
find more information about this problem in SAP Note 328181.
Call the Customizing Cockpit data extraction transaction and process all
open extraction requests.
Intially we have cleared the entries in LBWQ,RSA7 and SM13.But after clearing these entries also we are getting the same above error.
For support package upgrade in R/3 do we need to delete the SETUP table also in production environment?.
Is there any other way around without deleting the setup table to upgrade support package in R/3 system?
Please help us with your inputs urgently..
Thanks
Message was edited by:
Ganesh SThanks Siggi for the suggestion.
We have already cleared the v3 updates by running RMBWV* job manually.After clearing all the entries in LBWQ,RSA7 and SM13 still we have got the same above error.
When we imported In R/3 development system after deleting the setup table we didn't get the above error.But we are concerned about deleting the setup table in production system
though already deltas are running fine.
Is there any other way around? or deleting the setup table is the only option?
Please help... -
Invalid data status error during the data extraction
Hi,
while extracting capacity data from the SNP Capacity view to BW. i get the "invalid data status error" and the data extraction fails.
when debugged the bad requests of the ODS object, i found that for a certain product(which has both positive and negative input and out qtys) co-product manufacturing orders were created. but this product was not marked as the co-product and functionally its fine.
how can i rectify the data extraction problem..can you advice.
Thanks,
DhanushSir,
In my company for some production order status some are having "errors in cost calculation" ie "cser" .how to deal these kind of errors. -
Error in data extraction for 0TCT_DS22
Hi All .
I am facing issue in data extraction for 0TCT_DS22 , its giving message 'error in source system ' and also giving a dump
Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Date and Time 24.05.2010 11:22:53
Short text
No more storage space available for extending an internal table.
What happened?
You attempted to extend an internal table, but the required space was
not available.
As per following thread i updated the table but still data load is failing ( Our system is at EHP1)
DataSource 0TCT_DS22 not extracting Data
Any pointers what could be the solution for this data load failure .
Thanks.Hi Neetika,
This type of error occures due to lack of memory in server or no process is available for request process.
Please refer below forum.
Re: Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Have you done any custom coding? if yes then check the loop.. endloop statement. (not closing loop)
Thanks & Regards,
Ashish -
BODS 3.1 : SAP R/3 data extraction -What is the difference in 2 dataflows?
Hi.
Can anyone advise as to what is the difference in using the data extraction flow for extracting Data from SAP R/3 ?
1)DF1 >> SAPR/3 (R3/Table -query transformation-dat file) >>query transformation >> target
This ABAP flow generates a ABAP program and a dat file.
We can also upload this program and run jobs as execute preloaded option on datastore.
This works fine.
2) We also can pull the SAP R/3 table directly.
DF2>>SAPR/3 table (this has a red arrow like in OHD) >> Query transformation >> target
THIS ALSO Works fine. And we are able to see the data directly into oracle.
Which can also be scheduled on a job.
BUT am unable to understand the purpose of using the different types of data extraction flows.
When to use which type of flow for data extraction.
Advantage / disadvantage - over the 2 data flows.
What we are not understanding is that :
if we can directly pull data from R/3 table directly thro a query transformation into the target table,
why use the Flow of creating a R/3 data flow,
and then do a query transformation again
and then populate the target database?
There might be some practical reasons for using these 2 different types of flows in doing the data extraction. Which I would like to understand. Can anyone advise please.
Many thanks
indu
Edited by: Indumathy Narayanan on Aug 22, 2011 3:25 PMHi Jeff.
Greetings. And many thanks for your response.
Generally we pull the entire SAP R/3 table thro query transformation into oracle.
For which we use R/3 data flow and the ABAP program, which we upload on the R/3 system
so as to be able to use the option of Execute preloaded - and run the jobs.
Since we do not have any control on our R/3 servers nor we have anyone on ABAP programming,
we do not do anything at the SAP R/3 level
I was doing this trial and error testing on our Worflows for our new requirement
WF 1 : which has some 15 R/3 TABLES.
For each table we have created a separate Dataflow.
And finally in between in some dataflows, wherein, the SAP tables which had lot of rows, i decided to pull it directly,
by-passing the ABAP flow.
And still the entire work flow and data extraction happens ok.
In fact i tried creating a new sample data flow and tested.
Using direct download and - and also execute preloaded.
I did not see any major difference in time taken for data extraction;
Because anyhow we pull the entire Table, then choose whatever we want to bring into oracle thro a view for our BO reporting or aggregate and then bring data as a table for Universe consumption.
Actually, I was looking at other options to avoid this ABAP generation - and the R/3 data flow because we are having problems on our dev and qa environments - giving delimiter errors. Whereas in production it works fine. Production environment is a old set up of BODS 3.1. QA and Dev are relatively new enviornments of BODS. Which is having this delimiter error.
I did not understand how to resolve it as per this post : https://cw.sdn.sap.com/cw/ideas/2596
And trying to resolve this problem, I ended up with the option of trying to pull directly the R/3 table. Without using ABAP workflow. Just by trial and error of each and every drag and drop option. Because we had to urgently do a POC and deliver the data for the entire e recruiting module of SAP.
I dont know whether i could do this direct pulling of data - for the new job which i have created,
which has 2 workflows with 15 Dataflows in each worflow.
And and push this job into production.
And also whether i could by-pass this ABAP flow and do a direct pulling of R/3 data, in all the Dataflows in the future for ANY of our SAP R/3 data extraction requirement. And this technical understanding is not clear to us as regards the difference between the 2 flows. And being new to this whole of ETL - I just wanted to know the pros and cons of this particular data extraction.
As advised I shall check the schedules for a week, and then we shall move it probably into production.
Thanks again.
Kind Regards
Indu
Edited by: Indumathy Narayanan on Aug 22, 2011 7:02 PM -
Open data extraction orders - Applying Support Packs
Dear All,
I have done the IDES 4.6C SR2 installation.
While updating the support packs, i get the message saying
CHECK_REQUIREMENTS phase.
Open data extraction orders
There are still open data extraction orders in the system
process these before the start of the object import because changes to the ABAP Dictionary structures could lead to data extraction orders not being able to be read after the import and their processing terminating
For more details about this problem, see Note 328181.
Go to the Customizing cockpit for data extraction and start the processing of all open extraction orders.
I have checked the Note.
But this is something m facing for the first time.
Any suggestion!!!
Rgds,
NKThe exact message is :
Phase CHECK_REQUIREMENTS: Explanation of the Errors
Open Data Extraction Requests
The system has found a number of open data extraction requests. These
should be processed before starting the object import process, as
changes to DDIC structures could prevent data extraction requests from
being read after the import, thus causing them to terminate. You can
find more information about this problem in SAP Note 328181.
Call the Customizing Cockpit data extraction transaction and process all
open extraction requests. -
Sap crm(7.0) datasource test extract error
hi,all:
I activate the CRM datasouce 0CRM_CIC_CTI successfully, but when i did the test extract with T-CODE RSA3,THE error happened. the error description in the below:
Update mode F is not supported by the extraction API
Message no. R3011
Diagnosis
The application program for the extraction of the data was called using update mode F. However, this is not supported by the InfoSource.
System Response
The data extraction is terminated.
Procedure
Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.
what can i do to solve this question?
wish some help.
THANKS VERY MUCH!Hi,
关于CRM datasource的OSS MESSAGE是CRM的支持顾问负责的..
如果您还有疑问,可以告诉我message number, 我可以帮你确认下..
不过如果设计上的确不支持full mode..那支持顾问也无法阿..
祝好..
Vince -
Master data extraction from SAP ECC
Hi All,
I am a newbie here and teaching myself SAP BI. I have looked through the forums regarding master data extraction from SAP ECC in all forums but could not answers for my question. Please help me out.
I want to extract customer attributes from SAP ECC. i have identified the standard data source 0customer_attr and replicated in SAP BI. I have created infopackage for full update. I validated the extractor checker(RSA3) and found 2 records for 0customer_attr.
When I run the info package, the info package remains in yellow state until it times out. Please let me know in case i am missing anything, Please let me know if there is any other process for master data extraction similar to transaction data extraction.Hi All,
i did the below and afte clicking execute in the Simple job, it takes me back to the Monitor Infopackage screen.
From your info pack monitor --> menu environment-->job overview--> job in the source system--> prompts for source system(ECC) user id and password, enter them, you will get your job at SM37(ECC), select job and click on log details icon. there you can see details about your error. please share that error screen shot.
Please find the screenshots.
I did an Environment -->Check connection and found the below,
Maybe you are looking for
-
Why does exchange server work for MSN Mail on iPad and not on Mac Mini?
My MSN Mail works great on my iPad and iPhone but will not work on my Mac Mini? I input the same server address but it will not connect. I've even tried m.hotmail.com, etc. but not joy. Any ideas please?
-
How do I use my iphone as a modem
-
When i power on my mac, the screen that displays the apple logo while loading mac os x, has shrank. It seems that it has been resized to a different resolution. the edges are missing and top and bottom are extended beyond the frame of the screen....
-
Convert Binary Data into Pdf & send it as attachment in a mail in Workflow
Hi, Scenario: The interactive form saved in WebDynpro Application is sent to R/3 in binary format. It has to be converted into pdf and sent it as an attachment in mail to the respective person in workflow. Kindly help on these issues : 1. How to rece
-
All of a sudden my icons in cover flow view are blurry. Any ideas how can I fix it? A file by file fix is impractical. I have hundreds of thousands of image files.