Data extraction from datasource-0CRM_SRV_PRO_PLAN

When we executed query 0CRM_FOCS_Q0002, result was not having any data.
As this query is related with infocube 0CRM_FOCS, when we checked in RSA1- the datasource related to it was 0CRM_SRV_PRO_PLAN.
When I checked in RSA3 in CRM system,this datasource showed just 1 entry.
But this blog-https://scn.sap.com/thread/289692 gave me an additional thought that something should be done to extract actual records.
Actually what should we do to get complete records from datasource 0CRM_SRV_PRO_PLAN

Hi
Talk with someone from CRM team. Did they run a service plan simulation?
The datasource delivers data that are enabled after you simulate expected  service orders based on existing service plans.The data is only calculated during the simulation can be transferred to SAP BW for further analysis and strategic service planning.
hope that clarifies
Martin

Similar Messages

  • Date of last extraction from DataSource 0HR_PY_PP_2 is not available

    Hello all,
    We are using this data source to extract data for HR in BW. We are currently on BI 7.0
    When I used this datasource in BW development system it worked fine. But now I am trying to extract data using the same datasource in BW QA system and I am getting this error.
    "Date of last extraction from DataSource 0HR_PY_PP_2 is not available     HR_BIW_PP"
    The datasource is delta supported so I am trying to init it, and thats when I am getting this error.
    Has anyone seen this message before, can some give some suggestions?
    Thanks in advance

    Just quick check, check rsa3 if you can get any data and  also it seems like it is complaining about changes in extract structure, can you compare the extract structure of the two system manually? If you have made changes to the extract structure, did you move that change in the source system? Sometimes it worth it to replicate the datasource and reactivate the transfer structure using program RSActiTran.
    thanks.
    Wond

  • Date of last extraction from DataSource 0HR_PP_REC_52 is not available

    Hi ,
    Iam getting another error for data source 0HR_PP_REC_52 , it follows:
    Date of last extraction from DataSource 0HR_PP_REC_52 is not available HR_BIW_PP 1
    Please help as iam not aware of this type of extrcator.
    Thanks in advance.

    Hi,
    Did you delete the request under scheduler menu of your infopackage?
    Scheduler->Init options from the Source system->delete the request
    run Init with transfer option now. If it doesn;t help, simply replicate the datasources once and try initializing.
    Regards,
    Suman

  • You do not have authorization to extract from DataSource ZZ_TD_EBAN COMPONE

    Hi,
    Iam facing the problem As
    You do not have authorization to extract from DataSource ZZ_TD_EBAN COMPONENT.
    ERROR IN SUBSTEP
    ERROR IN SUBSTEP
    Error reading the data of InfoProvider ZDP_VIRT..
    I had created a Virtual Infoprovider. and taking the Dat source ZZ_TD_EBAN.
    done the Trasf and DTP. for data source to cube. which was bulit in BI7..
    i can see the flow AS Source system- datasource- virtual provider.
    for virtual provider at run time it picks the data  from source.
    But when i rum the query on this VP iam getting error     as
    You do not have authorization to extract from DataSource ZZ_TD_EBAN COMPONE
    even if i chek data at virtual provider level byclicking  display Data..
    after selecting the fields  once i execute . there aso iam facing the same error. as
    You do not have authorization to extract from DataSource ZZ_TD_EBAN COMPONENT.
    Once i get in tthe error.. i can see the below msg.. but even though not able to solve .. i need your assistence.
    You are not authorized to extract from DataSource ZZ_TD_EBAN in application component: MM .
    System Response
    The authorization check was performed with the following field values:
    DataSource: ZZ_TD_EBAN
    Application component: MM
    Subobject: DATA
    Activity: 03
    Procedure
    To be able to extract from the DataSource, you need authorization for authorization object S_RO_OSOA (authorizations SAPI-DataSource) with the field values specified above.
    Procedure for System Administration
    There is a role template S_RO_OSOA_TMPL (DataSource (OSOA) Display/Maintain/Extract) available that contains the authorizations to display, change and extract all DataSources.
    Pls help mewith your valuable answer.

    Hi ,
    As given in your error message that S_RO_OSOA authorization object is missing . You need to include this auth object in the ID from which you are extracting the data using the TCODE : PFCG . You can ask the basis person to do so for you .
    When you run any report on a virtual infoprovider , you need to give the authorization of the DTP & the transformations apart from your cube and datasource in PFCG so that it can display the output in the report . This setting is only necessary for virtual cubes.
    You can always check the missing authorizations in tcode : SU53 .
    Hope the above reply was helpful.
    Kind Regards,
    Ashutosh Singh

  • Data Mart and Data Extraction from an Infocube

    Can a data mart which is built on one Infocube in BW support delta extraction? We have two separate BW systems and are trying to extract data from one Infocube in one BW (Source) and load it to one Infocube in another BW(Target)?
    We have built a data mart on the source BW infocube and have successfully been able to extract and load the initial data load into the target BW infocube. I noticed that the field 0RECORDMODE was not on the datasource that was created to support this data mart so my gut feeling is that we will not be able to do delta data extractions from this data mart.  Any feedback or confirmation of this?

    Hi,
    The InfoCube that is used as an export-DataSource is first initialized , meaning that the current status is transferred into the target BW. When the next upload comes around only those requests will then be transferred that have come in since the time of initialization. Different target systems can also be supplied like this
    Since it is request based ..data mart on info cube supports delta.
    Hope its helpful,
    Anu.

  • Steps for Data extraction from SAP r/3

    Dear all,
    I am New to SAP Bw.
    I have done data extraction from Excel into SAP BW system.
    that is like
    Create info objects > info area> Catalog
                                                --> Character catalog
                                                --> Key catalog
    Create info source
    Upload data.
    create info cube
    I need similar steps for data extraction for SAP R/3
    1. when data is in Ztables ( using Views/Infosets/Function etc)
    2. When data is with Standard SAP using Business Content.
    Thanks and Regards,
    Gaurav Sood

    hi,
    chk the links
    Generic Extraction
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
    CO-PA
    http://help.sap.com/saphelp_46c/helpdata/en/7a/4c37ef4a0111d1894c0000e829fbbd/content.htm
    CO-PC
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6
    iNVENTORY
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
    Extractions in BI
    https://www.sdn.sap.com/irj/sdn/wiki
    LO Extraction:
    /people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
    /people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
    /people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
    /people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
    /people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
    Remya

  • Master data extraction from SAP ECC

         Hi All,
    I am a newbie here and teaching myself SAP BI. I have looked through the forums regarding master data extraction from SAP ECC in all forums but could not answers for my question. Please help me out.
    I want to extract customer attributes from SAP ECC. i have identified the standard data source 0customer_attr and replicated in SAP BI. I have created infopackage for full update. I validated the extractor checker(RSA3) and found 2 records for 0customer_attr.
    When I run the info package, the info package remains in yellow state until it times out. Please let me know in case i am missing anything, Please let me know if there is any other process for master data extraction similar to transaction data extraction.

    Hi All,
    i did the below and afte clicking execute in the Simple job, it takes me back to the Monitor Infopackage screen.
    From your info pack monitor --> menu environment-->job overview--> job in the source system--> prompts for source system(ECC) user id and password, enter them, you will get your job at SM37(ECC), select job and click on log details icon. there you can see details about your error. please share that error screen shot.
    Please find the screenshots.
    I did an Environment -->Check connection and found the below,

  • Parallel Data Extraction from R3 to BI

    Dear Experts,
       I am trying to execute Parallel data extraction from R3 Development to BI development.It was previously done smoothly .Without any changes its stop in parallel .Your suggestions are welcome.
    Regards
    SurendraJain

    Hi Surendra,
    thanks for your reply, I am not a basis expert but a BI person. You did not detail the solution when you resolved yourself, so i was wondering if you can share some bits over here.
    I would have appreciated if you would have give some details - there are quite a few parameters in RZ11.  What is the technical name of the parameter you are talking about ?
    You mentioned about checking the parameter - I mean what needs to be checked, any specific values need to be there.
    Regards
    Deepak

  • Performance Tunning- data extraction from FMGLFLEXA table

    Hi,
      Need to fetch data from FMGLFLEXA table based on below condtion.
           WHERE rfund IN s_rfund
               AND rgrant_nbr IN s_rgnbr
               AND rbusa IN s_rbusa
               AND budat LE v_hbudat.
    Please tell me how can i optimize this extaraction b'coz in production system there are lacks of records.
    Regards,
    Shweta.

    create a index on these fields due to which data extraction from table will be fast.

  • Data Extraction from Informatica

    Hi BI Gurus,
    I want to extract the data from SQL server through informatica. I went through SDN, but  I am not able to found relevant information. Please share the steps (methods) or links or documents about data extraction from informatica.
    Regards,
    PRK

    Hi,
    Use UD connect procedure to extract the data from Informatica or SQL server. you just need to create a new source system with the parrameters that can connect and read the SQL sever.
    There is another way of extracting it through DB connect as well, but I recommend you to go through the UD connect procedure to extract the data.
    Check with your basis team to setup a source system for SQL server if you are not aware of how to as it is purely based on TCP/IP.
    you need to create a source system as trird pary and supply the parrameters to it. Create a TCP/IP connection in SM59 to that source system where it need por numbers, schemas, alias etc to connect to the SQL server.
    Browse for UD connect in WIKI, will guide you good docs.

  • Data Extraction from CRM to BW

    Hi,
    I just need some information/help on BW Data Extraction from CRM, it would be great if some one could help out or mail some related help documents.
    Currently we are implementing the complaints module in CRM simultaneously on the BW side we have identified an info cube for complaints 0CSAL_C09, but this cube and its ODS source does not have all the required fields like (newly created text types, serial number etc), so how these tables and fields can be identified in the source system and added to extract structure in CRM. Also what is the table in which the CRM transaction data would be stored.
    Especially i require the newly added text types in CRM to appear in BW, there are around 5 new text types are added and user can enter free text, i need these information to be captured in reports. kindly mail me the steps to [email protected]
    Thanks
    Akila.R

    hi,
    try these links
    http://help.sap.com/bp_biv335/BI_EN/html/BW/SalesAnalysis.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f2910623-0c01-0010-de8f-d1926988a986
    http://help.sap.com/bp_biv135/html/bw.htm
    http://help.sap.com/bp_biv135/html/BW/SalesAnalysis.htm
    http://help.sap.com/bp_biv235/BI_EN/index.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/af/ed833b2ab3ae0ee10000000a11402f/frameset.htm
    this:
    http://help.sap.com/bp_biv235/BI_EN/index.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/af/ed833b2ab3ae0ee10000000a11402f/frameset.htm
    regards,
    pankaj singh
    reward if helpful

  • Data extraction from Non-Unicode ECC6 to Unicode SAP BI system

    Hi,
    We have an existing non-unicode ECC6 system. Currently we are installing SAP BI unicode system. Can anyone tell me are there any issues in data extraction for SAP BI from a non-unicode ECC6 system to an Unicode SAP BI system ?
    Please also note that our data consists of Asian (korean, Japanese & Chinese) fonts.
    Regards,
    Anirban

    Hi Des Gallagher,
    Thank you for your reply.
    I have gone through the notes suggested by you, but they suggest issues related to BW 3.x versions. We are currently on SAP_BW 700 - SP16. Also, among other notes i found note 510882 which might be helpful for custom developments.
    But i am still wondering whether we are going to face major issues related to data extraction from non-unicode ECC6 system to unicode SAP_BW 700 system.
    Incase you have any further details, please let me know.
    Thanks in advance.
    Regards,
    Anirban Kundu

  • Function module searched: Data extraction from BW to R/3?

    Hello everybody,
    has anyboday any idea on which function module or function group could be used for data extraction from BW to R/3?I have seen some threads,and found the function group RSAX which is actually for extraction from R/3 to BW,is it also suitable for the other direction(BW to R/3)?
    I have looked for this topic for a long time,but so far no success...
    Would you like to give me some hints?
    Regards,
    Liying
    Message was edited by: Liying Wang

    Hi,
    It's going to be an extraction to specific application in R/3 - couldn't be any universal extractor - applications have their own specific.
    But you can try application specific retractors, as examples look here:
    http://help.sap.com/saphelp_sem320bw/helpdata/en/99/97157967e3440a94d199538959cd0b/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c4/b2af6569e64418a21bd0ab4d83be83/content.htm
    Open hub functionality is another option:
    http://help.sap.com/saphelp_sem40bw/helpdata/en/ce/c2463c6796e61ce10000000a114084/frameset.htm
    Best regards,
    Eugene

  • Data Extraction from hierarchies in BW info-object

    Dear All,
    I have a question here regarding master data extraction from hierarchies from BW info-object.
    we have a info-object called as Customer which is defined in the standalone BW system. under the hierarchies for the customer we have the Channel defined.
    Now I have created 2 info-objects in APO BW for Customer and Channel. channel is defined as an attribute of the customer.
    I am wondering to do I extract data from the Customer info-object in standalone BW to both these charactersitics in APO BW?
    Regards,
    Kedar Agarkar

    Hello Kedar,
    Please open this thread on the SDN Forum "DATA WAREHOUSING".
    I already talked with a BW colleague and he suggested to try there, it seems to be their issue.
    Thanks and regards,
    Michel Bohn
    SCM-APO forum moderator.
    Edited by: Michel Bohn on Mar 28, 2009 12:29 AM

  • Data Extraction from CRM

    Hello Experts,
    I am presently working on data extraction from CRM system. I understand that there are three ways of data extraction from the CRM system:
    i) Using Middleware integration
    ii) CRM BI integration through XI
    iii) Generic ETL process as used when extracting data from other SAP systems
    Can anyone please suggest which one is the best method to follow and why?
    Thanks & Regards
    Nikhil

    Hi,
    The Third option is the best one I would say.
    Why to use any other way line XI integration or anything like that which involves more complexity in terms of development , maintenance and most importantly COST.  SAP is providing you the standard set of extractors, it will be a wise choice.
    Regards
    Pratap Sone

Maybe you are looking for