Data extraction from SAP R/3 BAPI to BW

hi,
i am extracting data from sap r/3 bapi into sap bw. can u please send me the link and documents of how to extract the data from bapi to sap bw.
Answers will be rewarded
Thanks
sd shahid

Hi Shahid,
    I hope i understood your question properly, because ; to the best of my knowledge, Third-party extraction tools can be used to extract data from non-SAP source systems into SAP BW. These tools supply extracted data directly to a staging engine BAPI on the SAP BW platform. The staging engine then performs the mapping and update rules. Third party vendors of extraction products certified for SAP BW include:
Informatica, Genio, Acta Works, Evolutionary Technology Inc., If you can get information from any of these third party vendors, then i hope your query will be cleared.

Similar Messages

  • Master data extraction from SAP ECC

         Hi All,
    I am a newbie here and teaching myself SAP BI. I have looked through the forums regarding master data extraction from SAP ECC in all forums but could not answers for my question. Please help me out.
    I want to extract customer attributes from SAP ECC. i have identified the standard data source 0customer_attr and replicated in SAP BI. I have created infopackage for full update. I validated the extractor checker(RSA3) and found 2 records for 0customer_attr.
    When I run the info package, the info package remains in yellow state until it times out. Please let me know in case i am missing anything, Please let me know if there is any other process for master data extraction similar to transaction data extraction.

    Hi All,
    i did the below and afte clicking execute in the Simple job, it takes me back to the Monitor Infopackage screen.
    From your info pack monitor --> menu environment-->job overview--> job in the source system--> prompts for source system(ECC) user id and password, enter them, you will get your job at SM37(ECC), select job and click on log details icon. there you can see details about your error. please share that error screen shot.
    Please find the screenshots.
    I did an Environment -->Check connection and found the below,

  • Generic Data Extraction From SAP R/3 to BI server using Function Module

    Hi,
    I want step by step procedure for Generic Extraction from SAP R/3 application to BI application
    using Functional module.
    If any body have any Document or any PPT then please reply and post it in forum, i will give point for them.
    Thanks & Regards
    Subhasis Pan

    please go thr this link
    [SAP BI Generic Extraction Using a Function Module|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/s-u/sap%20bi%20generic%20extraction%20using%20a%20function%20module.pdf]
    [Generic Data Extraction Using Function Module |Re: Generic Data Extraction Using Function Module;

  • Steps for Data extraction from SAP r/3

    Dear all,
    I am New to SAP Bw.
    I have done data extraction from Excel into SAP BW system.
    that is like
    Create info objects > info area> Catalog
                                                --> Character catalog
                                                --> Key catalog
    Create info source
    Upload data.
    create info cube
    I need similar steps for data extraction for SAP R/3
    1. when data is in Ztables ( using Views/Infosets/Function etc)
    2. When data is with Standard SAP using Business Content.
    Thanks and Regards,
    Gaurav Sood

    hi,
    chk the links
    Generic Extraction
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
    CO-PA
    http://help.sap.com/saphelp_46c/helpdata/en/7a/4c37ef4a0111d1894c0000e829fbbd/content.htm
    CO-PC
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6
    iNVENTORY
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
    Extractions in BI
    https://www.sdn.sap.com/irj/sdn/wiki
    LO Extraction:
    /people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
    /people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
    /people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
    /people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
    /people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
    Remya

  • Data extraction from SAP r/3 to sql 2000, bpc server

    Hi All,
    I have posted a similar thread previously,sap r/3 to sql 2000/2005, and understood how to transfer data from SAP R/3 to SQL 2005, but I need to transfer data from SAP R/3 to SQL 2000 server, not SQL 2005 server.
    Any help will be greatly appreciated.
    Regards,
    Kranthi.

    If you want to extract SAP R/3 data to SQL 2000, here are some alternatives:
    1. It becomes very easy if by any chance, you are using SAP BW with SAP R/3. You can extract the data into BW using standard or custom extractors and then send it out with open hub. SQL2000 can pick the flat files from a specified location at regular intervals.
    2. You can use Business Object extractors. You can get more info at:
    http://www.france.businessobjects.com/pdf/products/dataintegration/rapid_marts_sap_infosheet.pdf
    3. If that is not an option, then you need to have a tool that allows being called via RFC. This agent will then execute the required command on behalf of your application and return the result. I do not know if there is a ready-to-use RFC-compliant agent for SQL Server. If you have a tool that does it for you, you might have to check your network connections (ping), permissions etc. and see if you can execute an rSQL from the remote machine on the SQL server.
    There is a general solution to connect to nearly any kind of modern server application from a remote site by using simple HTTP requests. Suitable HTTP server for most needs would be:
    1. Microsoft IIS
    2. Java Tomcat or IBM WebSphere
    3. SAP WebAS
    In most cases, the IIS would probably be the one as it is installed on the Windows 2000 server anyway.
    Define an Active Server Page (ASP.NET) and insert the necessary code in your favorite language to extract the data from the SQL server.
    Your ASP.NET page would pack the result in the HTTP response object to be returned. In order to call the page from SAP you call the function modules HTTP_POST (using a HTTP POST request) or HTTP_GET (for HTTP GET request) on the standard RFC destination SAPHTTPA. (Pointing to a SAP utility program saphttp that resides in the SAP binary directory of your SAP database server and can be called from the command line in order to test its functionality without RFC).
    Regards
    Pravin

  • Data Extraction from SAP R/3 Table View in BW

    Dear All,
    I am trying to create a BW query from SAP R/3 Table View.
    Till now i have created a table view
    Extracted Data source in R/3 Useing Tcode : RSA3
    In BW Side
    1. I have replicated the data source in Source system
    2. Created  info object
        and info object catalog
        and assigned it
    Now i am little confused over what to do next
    wheather to create ODS object in info cube,
    Please guide me with rest of steps to follow.
    Regards,
    Gaurav

    Hi,
    After replicating DS in BW, you have to maintain ODS or Cube for maintaining data in BW.
    After loading data into Data Targets you can create Reports based on those Data Targets.
    For better reporting performance you can create Cube rather ODS.
    Info Source(After Creating info Objects, you have to create a Transfer Structure to map the Fields.)
    Then create a Data Target ODS/Cube.
    Update rules
    Info Package
    Hope it helps you .
    Let us know if you still have any issues.
    Reg
    Pra

  • Logical Data Extract from SAP/Oracle

    Hi,
    We have been asked by our client to develop a data extraction tool for SAP/Oracle. For example, we would need to extract user/employee information.
    What is the best way to go about this? Ideally we would like to allow the user to connect to the DB and select the the data that we would like through a UI. The problem is that they will not know the schema and obviously too many tables to navigate through.
    Are there any legal concerns here?
    Regards,
    Justin

    Justin Todd wrote:
    Hi,
    >
    > We have been asked by our client to develop a data extraction tool for SAP/Oracle. For example, we would need to extract user/employee information.
    >
    > What is the best way to go about this? Ideally we would like to allow the user to connect to the DB and select the the data that we would like through a UI. The problem is that they will not know the schema and obviously too many tables to navigate through.
    >
    > Are there any legal concerns here?
    >
    > Regards,
    > Justin
    Hi Justin,
    Use BAPI functions, instead of directly accessing tables on the database.
    Best regards,
    Orkun Gedik

  • Data extraction from sap r/3 to flatfile

    hello Guru's
    i am new to this feild. i got a requirement in such a way i have to extract data from feilds of different tables to flatfile.
    ( actual Scenario is we want to send data to sybase server through flatfile)
    plz send me some documents how to proceed with the specification
    usefull code in this regard is lot helpfull.
    thanks and regards
    aj

    Hello Raja,
    Here are some simple steps ...
    When you want to load data from a flat file, there is no process of datasource replication. The datasource has to be created manually on the BW system itself. When creating this datasource you start from the InfoSource and assign the source system for flat file load. This is usually something like PC_FILE or FLATFILE.
    Then you can start creating the datasource. You need to mention the field names in this datasource. Note that in your flat file, the sequence of fields must exactly match the sequence of fields in the datasource, else the data will be wrongly mapped.
    On the same screen and tab you can also do a preview of the data that will be loaded. Click the preview button and put in the path of the file. Mention other details like header row, and number of rows to be displayed and then you will be able to judge if the data is being loaded correctly or not.
    When loading the data, then file cannot be open else you will get an error message. Also to be able to schedule the flat file loads in process chains, the file cannot be on your PC. It has to be on the application server.
    This is some basic info. Please post back if you need details on any aspect.
    Hope this helps...
    Assigning points is the way to thanks in sdn.

  • Extraction of data from SAP R/3 Bapi into SAP BW

    hi,
    i am extracting data from sap r/3 bapi into sap bw. can u please send me the link and documents of how to extract the data from bapi to sap bw.
    Answers will be rewarded
    Thanks
    sd shahid

    Hi Swapnali,
    In your case you have to send process order to XI and you have a bapi that satisfies your requirement.
    Here the solution depends what is the triggerring point of the Interface.
    If you want that from SAP side Interface should be triggered, then Use ABAP proxy program
    You have to craete a Abap proxy class using outbound message interafce defined in IR of XI.This can be done by transaction SPROXY.
    Then create a program that call sync/async method that is created by Sproxy t.code.
    In this way , when u will execute the proxy program in R/3 , then call will be made to BAPI in Sap from XI server and u will get output back to your proxy program.
    If your requirement is to not to trigger from SAP then nothing is required in R/3 side.
    In XI , Bapi will be added in imported objects in Integration repository and bapi will be called.
    Hope this will help u.
    Please revert in case of queries.
    Regards,
    Monica

  • Data extraction from Non-Unicode ECC6 to Unicode SAP BI system

    Hi,
    We have an existing non-unicode ECC6 system. Currently we are installing SAP BI unicode system. Can anyone tell me are there any issues in data extraction for SAP BI from a non-unicode ECC6 system to an Unicode SAP BI system ?
    Please also note that our data consists of Asian (korean, Japanese & Chinese) fonts.
    Regards,
    Anirban

    Hi Des Gallagher,
    Thank you for your reply.
    I have gone through the notes suggested by you, but they suggest issues related to BW 3.x versions. We are currently on SAP_BW 700 - SP16. Also, among other notes i found note 510882 which might be helpful for custom developments.
    But i am still wondering whether we are going to face major issues related to data extraction from non-unicode ECC6 system to unicode SAP_BW 700 system.
    Incase you have any further details, please let me know.
    Thanks in advance.
    Regards,
    Anirban Kundu

  • Data Extraction from MS-BI to SAP-BI

    Hi All,
    We have a requirement for data extraction from MS-BI to SAP-BI. In MS-BI cube they have same fact table and dimension table. This fact table is linked with dimension key. I want to know how to extract the data from the MS-BI cube to SAP-BI.
    Can we go with DB connect or Info spoke. Which will be the best option?? Let me know the steps also.
    And also how to find out the dimension table in SAP-BI cube??
    Pls let me know.
    Regards
    Sathiya

    Hi,
    a few years ago I used the DB-connect to extract data from siebel. Nowadays I think you can easily use UD-connect.
    regards
    Siggi

  • Data extraction from oracle

    We need to pull data like material information, purchase order information from SAP to our local oracle database. How can we connect our application to download this data direcly from SAP's oracle database to our local database. We don't want to use BAPI calls. Is there is any way to connect to SAP's oracle directly?

    There are ETL tools made for this that have add-ons for SAP R3/ECC, so that extraction of data uses native SAP functionality, and then loads to Oracle tables (including using native Oracle buik load functionality).
    Two tools of this nature come to mind: Informatica and Talend. Informatica has an enterprise-class ETL tool that does exactly what you're looking to do, but the cost for Informatica is quite huge. On the other end of the spectrum, Talend also performs the tasks you're looking to perform and it's an open-source tool (free to download and use - cost for support and training).

  • Extraction from SAP ECC to SAP BI

    What are the steps for Extraction from SAP ECC to SAP BI? Thanks.

    Hi,
    we have two types of extractions 1) Application specific 2)cross application
    under applicatin specific -->we have customer genenrated and business content extractions
    under customer generated means LIS, CO-PA, FI-SL(i.e no ready made data source in business content so we have to generate datasource)
    Business content means there is ready made business content datasource so we can use it
    LIS,LO --> when ever we go for extracting logistics informatin
    LO steps
    http://www.sap-img.com/business/lo-cockpit-step-by-step.htm
    LO Cockpit (Use transaction LBWE)
    /people/vikash.agrawal/blog/2006/12/18/one-stop-shop-for-all-your-lo-cockpit-needs
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/u/21406 [original link is broken] [original link is broken]
    /people/sap.user72/blog/2005/09/05/sap-bw-and-business-content-datasources-in-pursuit-of-the-origins
    To understand LO extraction go through these weblogs by Roberto
    /people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
    /people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
    /people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
    /people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
    /people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
    under cross Applicaion
    Generic extraction-->table, view, infoset query, function module
    Generic extractors are of 3 types:
    1. Based on table/view
    2. Based on Infoset Query
    3. Based on Function module
    GenericSteps
    Log on sap R/3.
    Step 1. create a table or view for generic extraction in se11.
    Step 2. Goto  t-code RSO2
    Step 3. Here u have to decide whether to extract transaction data or master data attributes or texts.
    Step 4. suppose if u have opted for transaction data,then give name in the column ex:ztd_m(data source name)
    Step 5. select create button,this will take u to another screen.
    Step 6. Here u have to decide from which application component u r extacting data.Ex: SD,MM,..
    Step 7. in this screen u have to fill short disciption,medium,long( these r mandatory).
    Step 8. then U have to Table name or view name which u have created in se11.
    Step 9. I f u want to maintain generic delta then u can select generic delta in top left hand side corner.
    Step 10. in next screen u have to give some field which is primary key.
    step 11. here u to specify whether time stamp or cal day or numeric pointer depending on u r requirement.
    step 12. then u have to specify  whether new status for changed records or additive delta.
            If u choose additive delta ,then u have to load data to infocube or ods object.
            If u choose new status for changed records, then u to load data  to ods object only.
    Step 13. then save it.
    Step 14. then logon to sap bw ,then replicate the data source then as usuall.
    COPA
    CO-PA--> for financial info
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/COPA/COPA.pdf
    You can browse forum for more detailed info..
    Regards,
    B

  • Data Extraction from CRM to BW

    Hi,
    I just need some information/help on BW Data Extraction from CRM, it would be great if some one could help out or mail some related help documents.
    Currently we are implementing the complaints module in CRM simultaneously on the BW side we have identified an info cube for complaints 0CSAL_C09, but this cube and its ODS source does not have all the required fields like (newly created text types, serial number etc), so how these tables and fields can be identified in the source system and added to extract structure in CRM. Also what is the table in which the CRM transaction data would be stored.
    Especially i require the newly added text types in CRM to appear in BW, there are around 5 new text types are added and user can enter free text, i need these information to be captured in reports. kindly mail me the steps to [email protected]
    Thanks
    Akila.R

    hi,
    try these links
    http://help.sap.com/bp_biv335/BI_EN/html/BW/SalesAnalysis.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f2910623-0c01-0010-de8f-d1926988a986
    http://help.sap.com/bp_biv135/html/bw.htm
    http://help.sap.com/bp_biv135/html/BW/SalesAnalysis.htm
    http://help.sap.com/bp_biv235/BI_EN/index.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/af/ed833b2ab3ae0ee10000000a11402f/frameset.htm
    this:
    http://help.sap.com/bp_biv235/BI_EN/index.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/af/ed833b2ab3ae0ee10000000a11402f/frameset.htm
    regards,
    pankaj singh
    reward if helpful

  • Function module searched: Data extraction from BW to R/3?

    Hello everybody,
    has anyboday any idea on which function module or function group could be used for data extraction from BW to R/3?I have seen some threads,and found the function group RSAX which is actually for extraction from R/3 to BW,is it also suitable for the other direction(BW to R/3)?
    I have looked for this topic for a long time,but so far no success...
    Would you like to give me some hints?
    Regards,
    Liying
    Message was edited by: Liying Wang

    Hi,
    It's going to be an extraction to specific application in R/3 - couldn't be any universal extractor - applications have their own specific.
    But you can try application specific retractors, as examples look here:
    http://help.sap.com/saphelp_sem320bw/helpdata/en/99/97157967e3440a94d199538959cd0b/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c4/b2af6569e64418a21bd0ab4d83be83/content.htm
    Open hub functionality is another option:
    http://help.sap.com/saphelp_sem40bw/helpdata/en/ce/c2463c6796e61ce10000000a114084/frameset.htm
    Best regards,
    Eugene

Maybe you are looking for