Data Extrator 0TR_LP_1 could not replicated

I have Activated the Extractor 0TR_LP_1 in SAP ERP Systems through SBIW (Tcode)
Checked the extractor using rsa3 (tcode) and list the data. Extractor is working fine and displaying the required data
In BW I replicated on main node SAP R/3 - in status bar it did display that 0TR_LP_1 is replicated
After completion of replication I refreshed the DataSource list many times. But extractor did not display. Even Treasury node did not displaying.
Please help me if any one got this kind of problem.
Tests and Analysis:
I activated other datasources like 0CO_OM_CCA_2 under Controlling. It replicated successfully.
I made a test for such node which is not in BW like PP - I activated & checked the extractor 2LIS_04_PECOMP under Project Planning.
I replicated in BW on the main node SAP-R/3, I saw the Data Extractor displayed in Status bar but did not appeared in data source list. I guess that the Data Sources whose main nodes are not in the list cannot activate.

check that datasource under NODESNOTCONNECTED in BW system.
(RSA1 -> Modeling -> DataSources -> Unassigned Nodes) or (RSA1 -> Modeling -> InfoSources -> Unassigned Nodes)
U can also run tcode RSA9 in BW system, so that all application components get installed in BW.
If the above does not help, then from RSA1 -> Modeling -> Source Systems... Select your R/3 source system -> Replicate Datasources

Similar Messages

Data source executive could not be found

Hello there, I have recentley did my first dynamic website
using coldfusion MX 7. After I uploaded all the files in the server
of godaddy.com on a window platform which supports cfm, I had
realised that all the DSN routes were still
C:cfusion7\wwwroot\database\executive.Users... so I changed all the
tags to D:\Hosting\executivemalta\database\executive.Users....
Unfortunatley I keep on receiving the error Data source executive
could not be found! I have also created an access database from the
godaddy control panel and located the database to a folder called
accesscf and changed the DSN route as instructed by godaddy.
Unfortunatley that didn't even work. Could somebody out there be
generous enough to help me solve this problem? The following is the
error:
Error Occurred While Processing Request
Data source executive could not be found.
The error occurred in D:\Hosting\executivemalta\index2.cfm:
line 4
2 : <cfset MM_redirectLoginSuccess="../homepage.cfm">
3 : <cfset MM_redirectLoginFailed="../failed.cfm">
4 : <cfquery name="MM_rsUser"
datasource="#Request.DSN#">
5 : SELECT Username,Password FROM
D:\Hosting\executivemalta\accesscf\executive.Users WHERE
Username='#FORM.username#' AND Password='#FORM.password#'
6 : </cfquery>
DATASOURCE executive
Please try the following:
Check the ColdFusion documentation to verify that you are
using the correct syntax.
Search the Knowledge Base to find a solution to your problem.
Browser Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1;
SV1; .NET CLR 1.1.4322)
Remote Address 212.56.128.21
Referrer
http://www.the-executive.biz/index2.cfm
Date/Time 08-Aug-06 11:17 PM
Stack Trace (click to expand)
at
cfindex22ecfm807111997.runPage(D:\Hosting\executivemalta\index2.cfm:4)
at
cfindex22ecfm807111997.runPage(D:\Hosting\executivemalta\index2.cfm:4)
java.sql.SQLException: Data source "executive" not found.
at coldfusion.sql.DataSrcImpl.validate(DataSrcImpl.java:90)
at coldfusion.sql.SqlImpl.validate(SqlImpl.java:203)
at
coldfusion.tagext.sql.QueryTag.doStartTag(QueryTag.java:443)
at
cfindex22ecfm807111997.runPage(D:\Hosting\executivemalta\index2.cfm:4)
at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:152)
at
coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:343)
at
coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65)
at
coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:210)
at coldfusion.filter.PathFilter.invoke(PathFilter.java:86)
at
coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:50)
at
coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
at
coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
at
coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
at
coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at coldfusion.CfmServlet.service(CfmServlet.java:105)
at
coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:78)
at
jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
at
jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at
jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:257)
at
jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:527)
at
jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:204)
at
jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:349)
at
jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:457)
at
jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:295)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

Hi,
I updated Sources\SXS with fresh files and now it looks like it works?????
/SaiTech

HT3546 I get an error when trying to back up on my TC. Message says - The backup disk image "/Volumes/Data/Macintosh.sparsebundle" could not be accessed (error -1).

I get an error when trying to back up on my TC. Message says - The backup disk image “/Volumes/Data/Macintosh.sparsebundle” could not be accessed (error -1).
Any suggestions

See here...
https://discussions.apple.com/message/20933934#20933934

HT201514 When I try to back up ,I get the error message:The backup disk image "/Volumes/Data/ iMac.sparsebundle" could not be accessed (error -1).

When I try to backup I get the error message.The backup disk image"/Volumes/Data/iMac.sparsebundle" could not be accessed(error-1) Any Ideas? it was working fine and i can't think of any changes I made to the system to affect this?

Start with the best resource available..... Time Machine --- Troubleshooting from Pondini, the wizard of all things Time Machine.
" . . . sparse bundle could not be accessed (error -1)"

The backup disk image "/volumes/data/GuisselleiMac.sparsebundle" could not be created error null

Hello...
I just got my first 2tb TimeCapsule (TC). Unfortunately, it is not backing up!! I keep on getting the message "the backup disk image "/volumes/data/GuisselleiMac.sparsebundle" could not be created (error (null))"
I've looked in many websites but can't find a solution... I've tried re-setting the TC to original settings, turning my Mac off and on, changing the name of my mac, changing the name of my mac on the network, nothing works!!!
My TC is connected with an ethernet cable to a linksys router wich is connected to the cable modem, so it is in bridge mode. I have not connected the TC to my mac, I don't think this is necessary..
Can someone help me please!!!

My TC is connected with an ethernet cable to a linksys router wich is connected to the cable modem, so it is in bridge mode. I have not connected the TC to my mac, I don't think this is necessary..
Your TC is not directly connected to the Mac and unfortunately it does seem to matter.
The reason the TC fails is not entirely clear but it has to do with Mavericks.
Let me recommend you test what happens with the TC reset and plugged directly into the Mac by ethernet.
You will need to run it in router mode. Ignore all the errors and see if it now works.
The other suggestion is to manually mount the TC hard disk
First of all find it in the network via network utility.
Run netstat and get the current routing table.
Locate your TC on it.. On mine above it shows as tcgen4.local
So in Finder top menu.. Go > Connect to Server.
Type in AFP://TCnetworkname.local (exactly as it appears in netstat)
Or use the IP address.. the problem is that in your setup it is probably not fixed.
The current IP can be found by pinging the name. So ping in a terminal or in network utility.
ping tcgen4
ping: cannot resolve tcgen4: Unknown host
Note how you must use the full domain.
ping tcgen4.local
PING tcgen4.local (192.168.2.201): 56 data bytes
64 bytes from 192.168.2.201: icmp_seq=0 ttl=255 time=4.160 ms
64 bytes from 192.168.2.201: icmp_seq=1 ttl=255 time=3.742 ms
64 bytes from 192.168.2.201: icmp_seq=2 ttl=255 time=3.332 ms
64 bytes from 192.168.2.201: icmp_seq=3 ttl=255 time=3.785 ms
^C
--- tcgen4.local ping statistics ---
4 packets transmitted, 4 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 3.332/3.755/4.160/0.293 ms
So you have now established the IP..
And type that in.
AFP://192.168.2.201 (or whatever shows).
Once you have mounted the disk .. delete the old Time Machine setup as per A4 in Pondini.. and set up again.
It should work.. but I strongly recommend a direct link to the TC.

SCOM 2012 Data Access Service could not start

Hello,
I have 3 SCOM 2012 servers. I got the error that the All Managament Server Pool is not available. Google search give me a lot of posts to add folder PoolManager at HKLM\System\CurrontControlSet\services\HealthService\Parameters with the DWORD keys PoolLeaseRequestPeriodSeconds
600 and PoolNetworkLatencySeconds 120. After restarting last SCOM server the Data Access Service could not run "Windows could not start the System Center Data Access Service. Error 1053: The service did not respond to the start or control request in a
timely fashion"
At Operations Manager Eventlog I see an error: "OpsMgr Management Configuration Service failed to communicate with System Center Data Access Service due the following exception: System.Runtime.Remoting.RemotingException: Unable to get ISdkService interface.
Please make sure local Sdk Service is running."
At System Eventlog I see an error: "A timeout was reached (30000 milliseconds) while waiting for the System Center Data Access Service service to connect."
Why did it run on the both other servers and failes on the third one? What can I check?
Regards, Doreen

Hi,
According to my understanding, after editing the registry key value, two of three management servers work fine now, and the issue only occur to the third one. Whether all those servers are running with Windows server 2012?
I would like to suggest you re-check the service account for the data access service, maybe we can re-enter the account credential. Those three servers may use the same account for the service, make sure the account is not disabled and you enter in the right
password for it.
Here is a similar thread, please go through it for more details:
http://social.technet.microsoft.com/Forums/en-US/f2281934-513d-4b60-bb4b-34ae8a892ace/failed-to-open-the-console-and-system-center-data-access-service-wont-start-scom-2012?forum=operationsmanagergeneral
In addition, please also restart the third server and check the result, and I know that there is a similar error message in SCOM 2007:
http://blogs.technet.com/b/csstwplatform/archive/2012/01/02/scom-2007-r2-unable-to-open-the-scom-console-after-server-reboot-the-sdk-service-is-stopped.aspx
Regards,
Yan Li
Regards, Yan Li

The backup disk image "/Volumes/Data/Macintosh.sparsebundle" could not be accessed (error (null))

I keep getting "The backup disk image "/Volumes/Data/Macintosh.sparsebundle" could not be accessed (error (null)).
I have updated the firmware on the Time Capsule and unplugged and replugged it in after waiting more than 10 seconds.
I cannot access the sparsebundle to repair from the Disk Utility.
Does anyone have any other suggestions?

It sounds like you have already tried some of pondini's suggestions..
But C17 is the main one, even if the error is a different number..
http://pondini.org/TM/Troubleshooting.html
Mavericks in particular is having issues with the TC..
So I strongly recommend a full factory reset of the TC.
Make sure all names are short, no spaces and pure alphanumeric. See C9 for more info.
Because Mavericks now uses SMB by default for network protocol, it is worthwhile mounting the TC manually using AFP.
In finder use the top menu, Go, Connect to Server.
Type in as follows,
AFP://TCname
Replace TCname with your actual TC name..
If the computer fails to find the TC, try again using the full domain name.
AFP://TCname.local is the standard one. The TC opts for local although you now have no place to set it in the airport utility.
If you still have trouble tell me.
Once the computer locates the network resources, it will ask for a password, public by default. Type in your password if you changed it or public. And store it in the keychain.
Now reset TM.. see A4.
And point the TM to the TC again which you have mounted.
See if that helps.

The backup disk image "/Volumes/Data/Macintosh.sparsebundle" could not be accessed (error -1).

I ma getting an error message from my Time Capsule, "The backup disk image “/Volumes/Data/Macintosh.sparsebundle” could not be accessed (error -1)." The backup is not working. How do I fix this?

Just a reboot of the TC or whole network will fix most of the network issues which are unfortunately very common with Lion and worse with Mountain Lion.
Look at C17 for that particular error code here.
http://pondini.org/TM/Troubleshooting.html

The Data Model connection could not be created

Hello,
Using powerquery, I am trying to access daily logs conveniently, the are over 24m records in a month.
I have selected the columns i need, and checked the box ' load data to Model', Once the query has ran it returns the error, "The Data Model connection could not be created".
Thank you for any help on this :)

This is a tough one because as an add-in, we can't get much information from the API for failures like this. Our general recommendation for people working with big data sets is to use 64-bit Excel. I realize that's a big hammer, but it might be your only
option if you need to work with a 24 million row data set.
Another option (which you may have already done) is to filter and aggregate that dataset as much as possible before adding it back into Excel. The analysis done inside the Power Query editor is less likely to negatively affect the working set on your machine.
(It does depend how the query is built and where the data is come from. If we have to pull all the data into memory to do some of the operations then it won't help at all.)

Time Machine Backup error - The backup disk image "/Volumes/Data/Extreme.sparsebundle" could not be accessed (error -1).

I am getting a Time Machine backup error "The backup disk image “/Volumes/Data/Extreme.sparsebundle” could not be accessed (error -1)."
Then a Finder window pops up with the backup directory in it. When I open it I see all the backups that were completed successfully and then the one there is simply always shows the data and .inProgress. I thought that maybe if I could delete the one that is perpetually in progress it would start a new one and run fine, but I won't let me delete it.

Reboot the TC.. or go to the 5.6 utility.. and disconnect all users.. to force it to reconnect.
C17 in troubleshooting.. to give more specifics to Kappy's comment.
http://pondini.org/TM/Troubleshooting.html

Service Desk: Pricing data for partner could not be read

Hi all,
I am trying to configure the Service Desk functionality for Service Providers (on EHP1).
I follow the SAP Documentation (SAP Solution Manager: Service Desk for Service Providers) and SLA's made easy in SAP Solution Manager. Also some discussion threads helped me with some steps (I applied e.g. the recommendation from Pricing data for partner 106 could not be read. , but it didn't help).
I am facing some errors related to the CRM part of the configuration.
When I create Service Desk Contract (SLFV) in CRMD_ORDER, the error appears Pricing data for partner xxx could not be read. I checked the setting of BP and I am not able to find the reason, for customer's (sold-to-party) BP the sold-to-party > Sales Area Data the Sales Organization/Distribution Channel/Division are maintained. Which information for pricing is needed and where can it be configured?
Another error - I am sure it is related to the first one - the service contract cannot be determined in the service message (in Item details view under product). The error messages are about sales area/organization, so I suppose there is something wrong with the link Service Contract -> Business Partner definition.
Could you please help me what can cause the error?
Thanks in advance,
Vaclav

Hi Balaji.S,
my problem was solved when I double checked the settings of org structure. That means there must be a consistent setting for sales organization / distribution channel / division in businness partner (tcode BP), organizational model (PPOMA_CRM), product workbench (COMMPR01). The setting must be same for both the sales department of the service provider and the customer's company (I am sorry I am not CRM, so I am following just this simple logic)
In the long text of the error (in CRMD_ORDER) I could see "expected" combination for sales organization / distribution channel / division (message e.g. The access was carried out with sales organization 'O 50000613', distribution channel '01' and division '') -> when the org model was set up everywhere in this way, the contract was automatically filled by the organization data and in the next step the contract could be determined in the service desk message.
Anyway it took some time to find out the correct combination. Deeper CRM knowledge would help me much.
Vaclav

OWA 2007 Issue : Microsoft.Exchange.Data.Storage.VirusMessageDeletedException Could not get properties.

Hi I am facing an issue with Outlook web access on my production server Exchange Server 2007 with Sp1. When i try to reply or forward a message from OWA it displays The message has been deleted due to a virus threat . Kindly refer to the below error details. I have a box with all 3 roles installed I do not have an Edge Server . IO have installed Forefront on the same Box as my exchange Server.Below is the Detail of the error . Kindly Help
A virus was found in this message and it has been deleted. For further
information, please contact technical support for your organization.
Click here to continue working.
Copy error details to clipboard
Show details
Request
Url: https://192.168.7.12:443/owa/forms/basic/BasicEditMessage.aspx?ae=Item&t=IPM.Note&a=Reply&id=RgAAAACFMIZq8d7LTqcPs%2bRZA5g%2bBwBDDZWeCojSQZ1bZZ7Ga%2fkWAAAAeCc6AABDDZWeCojSQZ1bZZ7Ga%2fkWAA5iTbjpAAAJ
User host address: 192.168.7.11
User: Munendra Pal Gangwar
EX Address: /o=First Organization/ou=Exchange Administrative Group
(FYDIBOHF23SPDLT)/cn=Recipients/cn=mp_gangwar
SMTP Address: [email protected]
OWA version: 8.1.336.0
Mailbox server: PFCDELEXCH01.PFCDOMAIN
Exception
Exception type: Microsoft.Exchange.Data.Storage.VirusMessageDeletedException
Exception message: Could not get properties.
Call stack
Microsoft.Exchange.Data.Storage.MapiPropertyBag.GetProperties(IList`1
propertyDefinitions)
Microsoft.Exchange.Data.Storage.StoreObjectPropertyBag.InternalLoad(PropertyDefinition[]
properties, Boolean forceReload)
Microsoft.Exchange.Data.Storage.StoreObjectPropertyBag..ctor(StoreSession
session, MapiProp mapiProp, Origin origin, PropertyDefinition[]
autoloadProperties, Boolean canSaveOrDisposeMapiProp)
Microsoft.Exchange.Data.Storage.StoreObjectPropertyBag..ctor(StoreSession
session, MapiProp mapiProp, Origin origin, PropertyDefinition[]
autoloadProperties)
Microsoft.Exchange.Data.Storage.Item.InternalBindItem(StoreSession
session, StoreObjectId itemId, Byte[] changeKey, ItemBindOption
itemBindOption, PropertyDefinition[] allPropsToLoad)
Microsoft.Exchange.Data.Storage.Item.InternalBind[T](StoreSession
session, StoreId id, ItemBindOption itemBindOption,
PropertyDefinition[] allPropsToLoad)
Microsoft.Exchange.Data.Storage.Item.InternalBind[T](StoreSession
session, StoreId id, PropertyDefinition[] allPropsToLoad)
Microsoft.Exchange.Clients.Owa.Core.Utilities.GetItem[T](StoreSession
storeSession, StoreId storeId, Boolean forceAsMessageItem,
PropertyDefinition[] prefetchProperties)
Microsoft.Exchange.Clients.Owa.Core.Utilities.GetItem[T](UserContext
userContext, StoreId storeId, Boolean forceAsMessageItem,
PropertyDefinition[] prefetchProperties)
Microsoft.Exchange.Clients.Owa.Core.Utilities.GetItem[T](UserContext
userContext, StoreId storeId, PropertyDefinition[] prefetchProperties)
Microsoft.Exchange.Clients.Owa.Basic.EditMessage.LoadMessage()
Microsoft.Exchange.Clients.Owa.Basic.EditMessage.OnLoad(EventArgs e)
System.Web.UI.Control.LoadRecursive()
System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Inner Exception
Exception type: Microsoft.Mapi.MapiExceptionVirusMessageDeleted
Exception message: MapiExceptionVirusMessageDeleted: Unable to get
properties on object. (hr=0x80004005, ec=1294) Diagnostic context:
Lid: 18969 EcDoRpcExt2 called [length=479] Lid: 27161 EcDoRpcExt2
returned [ec=0x0][length=422][latency=15] Lid: 23226 --- ROP Parse
Start --- Lid: 27962 ROP: ropOpenMessage [3] Lid: 17082 ROP Error:
0x50E Lid: 26977 Lid: 21921 StoreEc: 0x50E Lid: 27962 ROP:
ropExtendedError [250] Lid: 1494 ---- Remote Context Beg ---- Lid:
1238 Remote Context Overflow Lid: 14164 StoreEc: 0xFFFFFA1D PropTag:
0x672D0003 Lid: 8660 StoreEc: 0x8004010F PropTag: 0x672D0003 Lid:
21970 StoreEc: 0x8004010F PropTag: 0x672D0003 Lid: 23921 StoreEc:
0x3EC Lid: 21970 StoreEc: 0x8004010F PropTag: 0x672F0014 Lid: 23921
StoreEc: 0x3EC Lid: 21970 StoreEc: 0x8004010F PropTag: 0x6708000B Lid:
21970 StoreEc: 0x8004010F PropTag: 0xE960102 Lid: 21970 StoreEc:
0x8004010F PropTag: 0x6708000B Lid: 21970 StoreEc: 0x8004010F PropTag:
0xE960102 Lid: 21970 StoreEc: 0x8004010F PropTag: 0x67760102 Lid:
25394 Lid: 19506 Lid: 27698 Lid: 11285 StoreEc: 0x50E Lid: 21970
StoreEc: 0xFFFFFC07 PropTag: 0x30080040 Lid: 25818 Lid: 6153 StoreEc:
0x50E Lid: 25906 Lid: 5249 StoreEc: 0x50E Lid: 1750 ---- Remote
Context End ---- Lid: 27962 ROP: ropGetPropsSpecific [7] Lid: 17082
ROP Error: 0x4B9 Lid: 26465 Lid: 21921 StoreEc: 0x4B9 Lid: 27962 ROP:
ropExtendedError [250] Lid: 1494 ---- Remote Context Beg ---- Lid:
26426 ROP: ropGetPropsSpecific [7] Lid: 1750 ---- Remote Context End
---- Lid: 26849 Lid: 21817 ROP Failure: 0x4B9 Lid: 20385 Lid: 28577
StoreEc: 0x50E Lid: 32001 Lid: 29953 StoreEc: 0x50E
Call stack
Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32
hresult, Object objLastErrorInfo)
Microsoft.Mapi.MapiProp.GetProps(PropTag[] propTagsRequested)
Microsoft.Exchange.Data.Storage.MapiPropertyBag.GetProperties(IList`1
propertyDefinitions)

I had this same issue, except I have Symantec mail security not Forefront. It wound up being a line in the adult content filter. For whatever reason, they included "If you received this email" as one of the literal strings. This is probably part
of almost every corporate confidentiality clause I have ever seen!! go figure......
Thanks for the event log hint- since I have the adult content set to delete, I had no good tracking mechanism in Exhange or SMSME. I set email notifications for the future on these.
Brent
I had this same problem, but I have ESET Mail Security Server. in some one case the problem y solved if I attach the "user@domain" in the "white
List". But in many case the problem is continuous. I have Exchange 2007 in MS Windows Server 2003.
Thanks for yours help.

HT3275 For the past several days, I have been getting this message during backups: Time Machine could not complete the back up. The backup disk image "Volumes/Data/iMac.sparsebundle" could not be accessed (error-1).

For the past several days, I have been getting this message during backups:
Time Machine could not complete the back up. The backup disk image "Volumes/Data/bhoppy2's iMac.sparsebundle" could not be accessed (error-1). When I click on the 'help' icon on the message, it reverts to a blank page, and I cannot find anything online regarding the term 'sparsebundle.' In addition, I cannot access previous backups any longer.
Help?

See C17 in Time Machine Troubleshooting by Time Machine guru Pondini:
http://pondini.org/TM/Troubleshooting.html

SPL external data - SPL screening could not be performed

Dear all
My customer asked me to screen a list of ca. 4.000 (external) partners via t-code /SAPSLL/SPL_CHS03 .
The system stopped processing with the following message: 'Sanctioned party list screening could not be performed.'
Checking on possible root causes, I did the following:
1. CONS system: Reduced workload to 100 partners, then increased the amount step-by-step to check on a possible workload limit. Surprisingly, in the end I could process all 4.000 partners without problem!
2. Trying again in PRD system: Same problem as before. Using even 2.000 partners, the system will tell me ' Sanctioned party list screening could not be performed'. But increasing the amount from a low data volume seems possible.
^^Is that a known / typical error of the SPL screening? I would like to learn more about that strange system behaviour. If you know about possible solution approaches, I would be grateful for sharing. Thank you guys!
Best regards
t.

Hi Tzunami,
This issue can occur due to duplicate entries in the list you are trying to screen. It can also occur if there are no duplicate entires in the list, yet the system is reading them as duplicate.
Initially the list may not look like it has any duplicate entries but when the system begins, it may read the entries as duplicate due to a system limitation.
The maximum length of a business partner is 8 numbers and therfore for example the system will read the following:
2140002826 -> becomes 21400028
2140002896 -> becomes 21400028
4961001220 -> becomes 49610012
4961001203 -> becomes 49610012
These "duplicate" entries will lead to the end of the program as you have described.
Best Regards,
Eoin Hurley

Unable to add data connection. Could not load file or assembly 'Microsoft.SqlServer.Management.Sdk.Sfc, Version 11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified.

I installed MS SQL Server 2014 Express and I'm using VS 2013 Professional. I create a database in SQL Mgt Studio then I open up VS and using VB I create a form and add a data grid. When I test connection it is fine but when I click ok it gives
me the above message. Sql Server is listening to port 1433 with IPALL disabled. I installed management tools and another program. So I uninstalled and then installed SQLExpressADV 2014 reset everything as mentioned and I get the same results.
I cannot develop any applications and am getting frustrated enough to maybe start looking around for a better DB solution that works. I've noticed a lot of people getting this same error and I think Microsoft should implement a fix for this. Does
anyone have some ideas on how to fix this? Since it will not list the files it cannot find I do not know what is broken.

Hello,
Please perform the steps described in the following article.
http://sqlbeyond.blogspot.com/2012/08/vs-2012-error-could-not-load-file-or.html
But download the SQL Server 2014 version of the software mentioned in the article.
http://www.microsoft.com/en-us/download/details.aspx?id=42295
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Data Extrator 0TR_LP_1 could not replicated

Similar Messages

Maybe you are looking for