Data Federator XI 3.0 SP2 FP 8 download

Hi everybody,
I take a look on the SAP Service Market Place and i can´t find the FP 8 to the Data Federator XI 3.0 SP 2. Anybody knows where i can find it and/or Download it?
And another question, i need to install it in sequence? You know... first the FP 1 and then FP 2 ...  I don´t think so, but i must to tell.
Thanks a lot!

Hi,
this forum is for the SAP Integration Kit. I would suggest you post your questions into the forum for Data Federator.
Ingo

Similar Messages

  • Data Federator XI 3.0 SP2 and Virtualization

    Does anyone know if the Data Federator is supported in virtual environments such as VmWare 3.x or 4.x?
    Thanks is advance.
    Regards,
    Enrico

    Hi Enrico,
    DF can be installed in VM ware . we have used it in VM5 and VM6.
    If VM is of Windows 2000sp4,2003 R2 then it should work for DF .
    Hope this helps
    Thanks,
    Dayanand

  • Data Federator Connection to R3 - java.lang.NullPointerException

    Hi.
    We are trying to add a SAP R3 DataSource in Data Federator XI 3.0 SP2.
    Test Connection gives us the following message: "The connection was established but there is no table for the given connection parameters", what it seems to be ok according to the SAP doc.
    However, when we try to get a list of the Functions or Infosets in the SAP system, an error comes because of a "java.lang.NullPointerException". Checking the application log we get the following:
    2010/03/30 12:21:27.059|<=|||0|26537104| |||||||||||||||"[LeSelect.Api.LSStatementImpl] - [Execution Thread 4]Executing query: CALL executeConnectorCommand '/TEST//TEST/user_bla/sources/draft/R3SYS', 'GET_FUNCTION_LIST * * 200'"
    2010/03/30 12:21:27.074|>=|E||0|26537104| |||||||||||||||"[LeSelect.Core.n] - [Execution Thread 4]Bad Wrapper Error:
    java.lang.NullPointerException
         at LeSelect.Wrappers.SAPR3.H.F(y:343)
         at LeSelect.Wrappers.SAPR3.H.executeCommand(y:285)
         at LeSelect.Core.B.D.R(y:151)
         at LeSelect.Core.QueryEngine.H.p.G(y:131)
         at LeSelect.Core.QueryEngine.H.p.A(y:105)
         at LeSelect.Core.QueryEngine.B.J.A(y:72)
         at LeSelect.Core.QueryEngine.Executor.y.A(y:227)
         at LeSelect.Core.QueryEngine.m.A(y:284)
         at LeSelect.Api.LSStatementImpl.lsExecuteQuery(y:314)
         at LeSelect.B.E.D.V(y:935)
         at LeSelect.B.E.K.B(y:105)
         at LeSelect.B.E.G$_A.run(y:691)"
    We registered the callback program and did all of the steps indicated for the installation, also checked the possible sources of the error according to OSS Note 1278491.
    Any idea how to solve this? Thanks.

    Hello, we have the similar problem: while connecting from Data Federator to SAP ERP we get the following error - "Wrapper /ZTEST/sources/ZTEST reported an exception which is not a WrapperException: java.lang.NullPointerException: null"
    It's necessary to install "SAP BusinessObjects Data Federator Infoset, SAP Query and ABAP Functions Connector Prototype"
    SAP BusinessObjects Web Intelligence Reporting for SAP ERP
    for connection to SAP ERP.
    Are there any ideas? Thanks

  • Data Federator - Read timed out

    Hi,
    I'm using Data Federator XI 3.0 SP2. I have a datasource connecting to a web service. The web service may return take a long time to do heavy processing, etc., before returning any data. If I call the web service via Data Federator, I will get the following error
    Exception was thrown while executing a query on Data Federator Query Server.
      An exception occurred when querying Data Federator Query Server.
        [Data Federator Driver][Server]
    [Wrapper /TEST/sysadmin/sources/draft/ReturnInputAsOutput]HTTP input/output exception: Read timed out
          [Wrapper /TEST/sysadmin/sources/draft/ReturnInputAsOutput]HTTP input/output exception: Read timed out
            [Wrapper /TEST/sysadmin/sources/draft/ReturnInputAsOutput]HTTP input/output exception: Read timed out
              HTTP input/output exception: Read timed out
    I'm guessing that the Data Federator query timed out because the web service takes a long time to response, is it not? If this is the case, how do I increase timeout value? If this is not the case, then what does the error mean and how do I resolve it?
    Thanks.
    Edited by: Chih Hui Wan on Nov 19, 2009 9:15 AM

    Hi Dayanand,
    For testing purpose, I created a small simple web service with only one operation that sleep for more than two minutes before returning a string. I called this web service operation from Data Federator. After waiting for a while, I got the "Read timed out" error
    Regards,
    Chih Hui

  • Data Federator connection error

    Hi experts,
    I am trying to connect Data Federator 3.0 SP2 to Netweaver BI 7.1 SP3 and getting the following error..
    " The connection Data Federator Query Server Failed.. An Exception occured when querying Data Federator Query Server ...
      com.sap.conn.jco.JCoException: (109) RFC_ERROR_CANCELLED. Handle close pending..."
    Scenario:
    I have created a new project in Data Federator and trying to Add a DataSource to it. When I fill in required details and click " Test Connection" button, the above mentioned error comes up.
    I am pretty sure, I have connected to BI system before using the same username,password, client, hostname etc... before. However I am getting the error when I try now.
    By the way, I have registered the callbackServerprogramID on DataFederator as well as BI as per user guide.
    Could any one please share any ideas/ solutions
    Thanks a lot
    Phani.

    More detail on the error from leselect.log (if it helps in any way......)___
    2010/02/19 03:09:54.300|<=|||0|19222105| |||||||||||||||"[LeSelect.Api.LSStatementImpl] - [Execution Thread 9]Executing query: CALL getTables '/TEST/sysadmin/sources/draft', 'D_ZFCOM301', '%', CAST(null as VARCHAR)"
    2010/02/19 03:09:54.315|==|W||0|19222105| |||||||||||||||"[LeSelect.Wrappers.SapNWBI.A.J] - [Execution Thread 9]Ignore destination registration request because this destination is already registred: sapauddb04-BO_service-12562982cf3123318931bc31ed325d329532fd33513388-en-0"
    2010/02/19 03:09:54.409|>=|E||0|19222105| |||||||||||||||"[LeSelect.Core.n] - [Execution Thread 9]Wrapper Error:
    LeSelect.Wrappers.SapNWBI.C: Connection failure: com.sap.conn.jco.JCoException: (109) RFC_ERROR_CANCELLED: Handle close pending
         at LeSelect.Wrappers.SapNWBI.H.B(y:194)
         at LeSelect.Wrappers.SapNWBI.X.getConnection(y:338)
         at LeSelect.Core.B.D.<init>(y:119)
         at LeSelect.Core.B.F.A(y:165)
         at LeSelect.Core.I.T.B(y:448)
         at LeSelect.Core.I.V.next(y:226)
         at LeSelect.B.C.G.A(y:367)
         at LeSelect.B.E.K.B(y:177)
         at LeSelect.B.E.G$_A.run(y:691)
    Caused by: com.sap.conn.jco.JCoException: (109) RFC_ERROR_CANCELLED: Handle close pending
         at com.sap.conn.jco.rt.MiddlewareJavaRfc.generateJCoException(MiddlewareJavaRfc.java:604)
         at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcClient.connect(MiddlewareJavaRfc.java:1270)
         at com.sap.conn.jco.rt.ClientConnection.connect(ClientConnection.java:661)
         at com.sap.conn.jco.rt.PoolingFactory.init(PoolingFactory.java:103)
         at com.sap.conn.jco.rt.ConnectionManager.createFactory(ConnectionManager.java:171)
         at com.sap.conn.jco.rt.DefaultConnectionManager.createFactory(DefaultConnectionManager.java:44)
         at com.sap.conn.jco.rt.ConnectionManager.getFactory(ConnectionManager.java:160)
         at com.sap.conn.jco.rt.RfcDestination.initialize(RfcDestination.java:766)
         at com.sap.conn.jco.rt.RfcDestination.ping(RfcDestination.java:976)
         at LeSelect.Wrappers.SapNWBI.X.getConnection(y:336)
         ... 7 more
    Caused by:
    RfcException: [System <empty>|sapauddb04/00]
        message: Handle close pending
        Return code: RFC_CLOSED(6)
        error group: 109
        key: RFC_ERROR_CANCELLED
         at com.sap.conn.rfc.engine.RfcIoOpenCntl.RfcIsValidHandle(RfcIoOpenCntl.java:2044)
         at com.sap.conn.rfc.engine.RfcIoOpenCntl.RfcReceive(RfcIoOpenCntl.java:1880)
         at com.sap.conn.rfc.api.RfcApi.RfcOpen(RfcApi.java:180)
         at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcClient.connect(MiddlewareJavaRfc.java:1263)
    Edited by: Phani Kothwali on Feb 19, 2010 4:49 AM

  • Data federator 32/64 bit with SAP?

    We have a problem in Data federator that after the installation in "data source" there should be an SAP value that isn't there (this shold be active after SP).
    We have installed the multi platform edition in both 32 and 64 bit version, and also SP2 IA32 and 64.
    I've tries the both versions 32 and 64.
    Does anyone know how to sole this?
    regards Jacob

    To be more exact on what my colleague is describing above, the data source type that is missing is the SAP NW BW not SAP.  Also, we have SAP NW BI 7.01 level 7, DF XI 3.0 SP2 and BOE 3.1 installed.
    Thank you.
    Best regards,
    Zabrina

  • Data Federator - View Data in DF

    Hi,
    Can we view data in Data Federator if data source is SAP BW

    >
    > Although you may have tested the connection, check your "leselect" log file
    >
    Checked in leSelect.log
    Could not start server: Connect to SAP gateway failed
    >
    > Is it a case of resolving the DNS name? check in BW via RZ11 that the name is fully qualified as that is what DF is expecting.
    >
    Tried. However what parameter supposed to be entered. should it be I_RFC_DEXTINATION ?

  • Error when creating a new user in Data Federator XI 3.0

    Hi there,
    I am completely new to Data Federator so please bear with me.
    I have successfully created a new user but I am not able to run the command:
    GRANT EXECUTE ON PROCEDURE executeUpdateNativeQuery TO user1
    as I get the following error: Incorrect procedure name: 'executeUpdateNativeQuery' (Error code: 10000)
    I am following page 482 of the Data Federator User Guide.
    Thanks!
    Jason

    >
    Jason Hattrick wrote:
    > I am completely new to Data Federator so please bear with me.
    >
    > I have successfully created a new user but I am not able to run the command:
    >
    > GRANT EXECUTE ON PROCEDURE executeUpdateNativeQuery TO user1
    >
    > as I get the following error: Incorrect procedure name: 'executeUpdateNativeQuery' (Error code: 10000)
    >
    > I am following page 482 of the Data Federator User Guide.
    >
    > Thanks!
    > Jason
    Hi Jason
    There is a typo in the documentation, the name of the procedure is:
    executeNativeUpdateQuery
    By the way, you can get the full procedure list by entering the following query in the administrator
    SELECT * FROM leselect.system.procedures
    Hope this helps,
    Fred

  • Data federator

    Hello Experts,
    I am just wondering how is Data federator to create Web Intelligence reports on top of SAP BW Infoproviders using Relational universe instead of OLAP universe.
    My requirement is that we want to create universes with all the custom objects for calculations in it instead of creating them in bex query or in some in reporting level.
    Please advise and also I would appreciate if some can  please provide me some links on Data federator.
    Thanks.
    Rag

    Data Federator uses the Data Federator facade to query the BW analytic engine, bypassing the OLAP MDX engine.  It transforms the data into relational structures.  You can then query these relational tables using a universe and webi.

  • Data Federator connection from universe - commProtocol EBUS error

    I am working with a prospect that is attempting to get a universe to communicate with DataFederator via JDBC.  We modified the jdbc.sbo file and added the line
    <Paramter Name="URL format">jdbc:datafederator://$DATASOURCE$;catalog'&quot';$DATABASE$'&quot';;commProtocol=EBUS</Parameter>
    (single quotes were added above to preserver contents in quote marks, they are not really in the file)
    along with the appropriate classpaths, per the XI3 datafederator release notes.  However when the customer tries to connect via the connection manager in the universe the following error is thrown:
    [Data Federator Driver] Invalid identifier for site wrapper in parameter 'commProtocol'. Reason: EBUS
    Has anybody seen an error like this, and have any suggestion on how to correct it?
    Thank you.

    Hi Eric,
    Can you tell me which version of Data Federator and BOE you are using?
    It looks like you tried to configure Data Federator JDBC driver with a commProtocol that is not supported by this version of DF.
    Are you using Data Federator XI 3.0 SP1 (12.1.0.0) or later version?
    You can check the version of the Data Federator JDBC driver you are using by clicking "Test Connection" in Universe Designer. You will see the driver and database (DF) versions.
    Make sure you are using the 12.1.0.0 version or later for both driver and server.
    Regards,
    Mokrane
    Mokrane Amzal
    Software Development Manager

  • Data Federator Configuration

    Hi,
    I would like to configure Data federator for using the data from SQL 2005 and Access Databases.
    Can someone guide me in the proper direction to get this things done..
    Thanks,

    Hi addie,
    you require a driver which you can download from website and  place it  in the following directory
    E:\Program Files\Business Objects\BusinessObjects Data Federator 12\LeSelect\drivers
    and then you can add the data source in data federator designer and you can click on Microsoft >MS SQL SERVER>JDBC and give the parameters and you are connected
    Regards and thanks
    Abid paul

  • Data Federator connecting to BW 3.5

    I would like to use the Data Federator against a BW 3.5 system - is it possible to connect the DF to BW? Can someone help me with either documentation or how to do that. I'm currently using a OLAP universe and the performance is not very good
    Thanks for the Help

    Did you find a solution to this ?
    there is a SAP to Data federator guide available did you try this ?
    Regards,
    Manu

  • Data Federator 3.1

    I could not locate Data Federator 3.1 on SAP SMP, only XI 3.0 and XI R2 are available for download.
    Anyone has a link for DF 3.1 download?

    Hi Gowtha,
    an example of a DF setup looks like this
    (ODBC 1, ODBC 2, ODBC 3) -> DF -> ODBC (OpenAccess Bridge) -> Universe
    Once you install the DataFederator Drivers (Look for the subfolder in the folder you extracted the contents of the DF package) you will be able to setup an ODBC connection which allows you to access data within a DF project (you should be able to access all virtual tables and target tables defined there) from your universe.
    Please check the DF user guide for more infos on this.
    Regards,
    Stratos

  • Data Federator Universe Date Functions

    Hi,
    I created a Data Federator Universe from target tables (Source Tables from: Sql Server 2005 and Oracle 10g). Now, I want to create a object in the universe: "Days between 2 dates"(coming from 2 different target tables). I don't see any other date functions other than CURDATE(). How to create my object?
    Alternatively, Can I create a caliculated column in the existing target table? For Example, I want to create a new column "Days between 2 Dates" from 2 different tables by using a formula in Default mapping of the target table.
    Thanks & Regards,
    Peter

    Hi Amit,
    Thanks for your reply.
    Ok. So, Universe on top of Data Federator has limited functionality.
    And, other option you mentioned is on report level. I am creating an adhoc universe and I have few objects which will calculate days between 2 dates coming from 2 different tables.
    But, how can I achieve this on Data Federator level. I have no function there to find Days Between 2 dates. I see lot of time and date functions but not the one I required. Also, I added a column in the target table and tried to apply the formula there in the default mapping area. But, I see only the selected target table. I need another date column from another table, which is not displayed in the default mapping area.
    How can I achieve this?
    Regards,
    -Peter

  • Data Federator 4.0

    Is there a product for Data Federator 4.0 or is it delivered as Information Design Tool in BI 4.0?  Is there an upgrade path for Data Federator 3.1?
    Thank you.

    You might have better luck asking this question in the (somewhat misnamed) [Data Integration and Data Quality Management|Data Services and Data Quality; forum:
    This forum is dedicated to topics related to SAP BusinessObjects Data Services (Data Integrator, Data Quality Management, Text Data Processing), SAP BusinessObjects Information Steward (Metadata Management, Data Insight), SAP BusinessObjects Rapid Marts and SAP BusinessObjects Data Federator.
    (emphasis added)
    Regards,
    Sean
    P.S. to moderators: can you create a sticky post to this effect?

Maybe you are looking for