Data Filter issue with

Hi,
We have created a document from an Essbase ASO cube.
A data filter have been created in Essbase ASO Cube. The data filter is 'all Europe Region'. When this data filter is applied to the user and user logs in WA and accesses the document, the below error is produced.
========================================================
Loading this document produced errors.
Unknown members or dimensions have been removed from the document in an attempt to fix the problem.
Saving this document now will prevent these errors when the document is loaded again.
[1033] Native: 1001005 [Fri Mar 06 16:59:20 2009]uxsy9dbt.cos.agilent.com/vip_main/vip_main//Error(1001005) Unknown Member [Americas] in Report
==============================================
With no data filter assigned to the user, the report is fine...
Tested the same data filter in Excel-addin and there are no issues/error. Is there any setting that needs to be changed in WebAnalysis?

Following up even thought his is an old issue. Out of the blue my users began complaining their security in Web Analysis had gone awry. Their security in Excel add-in was fine though.
Most users use a WA Shared Preferences File here. However one user, unbeknownst to me, was able to hard code their userID/password in the "database" connection for the Shared Preference. So anytime another user logged in to Web Analysis, if you open the View Pane to see all the details, the Database user was John Doe - which was wrong, but the WebAnalysis user was John Smith - which was correct. The John Doe user like I said somehow managed to "save" his userID/pwd as the default, which caused all other users to "pass through" to Essbase as John Doe instead of as themselves, which means they were getting HIS filter not their own.
I wasn't able to figure out how he did that but to fix it I deleted his profile then Edited the Shared Preferences File | Databases tab | highlight database in question and choose Edit | change "Default logon" back to "Use User's ID and Password" instead of "Enter User ID and Password...John Doe|Pwd".
It works fine now. Users get their same, correct security filters applied whether they go in to Web Analysis or Excel add-in. (In Web Analysis we have it set up to open a report at a certain location depending on their security filters, so this was causing us quite a headache until we figured out what the problem was).
I opened a case with Tech Support to try and shed light on how the user was able to hard-code their login credentials in to the Shared Preference. Everyone only has Read access to that file, so. ?
HTH,
Karen S.

Similar Messages

Windows 8.1 Data reordering issue with Intel Adaptors

According to Intel, there is a data reordering issue with their adaptors and probably this dumb WIDI software. This is from Intel site. they say some are fixed, "A future Windows 8 fix will address this issue for other Intel wireless adapters." I
have one Nope, still broke. I get drops all the time. Brand new Toshiba laptop I7 16 gigs of ram and a SSD and a 2 gig Vid card. Would be nice to be able to play games but I get dropped all the time. Now would Microsoft quit hiding
about this, and fix the darn thing. Also i'm a system admin for 13 years. I have build over 1000 PCs and servers. I know bad software. Please fix this. PLEASE. Its not going to just go away and its not just Toshiba, I have seen other companies with the
same problem. If there is a Fix PLEASE POST IT. Or even a workaround I have tried everything.
http://www.intel.com/support/wireless/wlan/sb/CS-034535.htm

Hi,
Have your first tried the software fix under this link for your network adapter?
http://www.intel.com/support/wireless/wtech/proset-ws/sb/CS-034041.htm
Please Note: The third-party product discussed here is manufactured by a company that is independent of Microsoft. We make no warranty, implied or otherwise, regarding this product's performance or reliability.
Also, you can try to check if there is any driver update under Device manager from manufacture's website.
Kate Li
TechNet Community Support
Yep didn't work. Still get drops all the time, had to run a Cat 5E cable to my laptop from my modem, because I have Atheros Gigabyte Lan adaptor. Works Great. The Wireless still drops all the time. Has Microsoft let out the patch to fix this or is it coming in
April in the 8.1 patch that's coming. Funny thing is all for Widi, I don't even use widi, I got the software to do that from Samsung works better on my TV. Intel and Microsoft need to get this fixed. because their driving off gamers and that's the
people that make sure they buy Microsoft so they can play games. With the wireless link dead and a great laptop worthless what's the point. Ive been in IT for 13 years building PCs and Servers how I knew how to run a 60 FT Cat 5e line thru
a 2 story house and terminate it. Most people don't. Fix the problem.

A data-binding issue with a combo box.

Hi,
Iu2019m having a data-binding issue with a combo box. The field it is bound to is an integer. The valid values in the combo box are 1, 2, and 3. If I add a record when it is set to 1 or 2, the value gets stored correctly. If I add a record when it is set to 3, it is stored as 1. However, I can bring up the record just added on the form, change it to 3, and click u201CUpdateu201D and it is saved correctly as 3. If I change it so that the valid values are 4, 5, and 6, it saves a 1 regardless of what is selected in the combo box. It looks like the combo box is correctly bound for updates but not for adds. The table is a master type UDO. Any ideas? Iu2019m somewhat committed to the field being an integer. I'm using 2007A PL47.
Thanks,
Mike
Edited by: Mike Angelastro on Jul 1, 2009 2:43 PM

I tried a few things on my own. The result is that I decided that it was not a good idea to use a combo box bound to an integer (numeric) field. I donu2019t think the SDK can handle it. The reason it was an integer field in the first place is that before I changed it to a combo box it was a group of two option buttons. Option buttons use an integer (numeric) field. This worked just fine until I added a third option; the SDK didnu2019t handle the third option correctly when adding records. I thought that using a combo box instead would fix that. I was wrong; the problem remained. So I decided to use a character (alphanumeric) field instead. This works just fine.
So here is my advice: Never use option buttons if they need to be bound to the database; a combo box will actually work better when bound to the database. But use a character (alphanumeric) field.
Edited by: Mike Angelastro on Jul 5, 2009 9:15 PM

Uk date format issue with ASP and Access Database

I have an Asp form which updates records in an Access
database. Problem is
that the date format in the database record is dd/mm/yyyy
(UK), when
the record is displayed on the form it is mm/dd/yyyy(US)
which after I
update the record in the database the date has changed to the
new format.
I have tried everything I can to change the format but to no
avail...anyone any ideas how I can resolve this issue?
Thanks
Steve

stevo.s wrote:
> Hi
>
> I have tried changing the format on the date field on
the server behaviours
> panelto ddmmyyy. Also have tried to set the form field
format to ddmmyy. I have
> also tried to use a function I got from a posting
somehwere on the net to no
> avail. <%function ddmmyyyy(varDate)
> ddmmyyyy = Day(DateValue(varDate)) & "/" &
Month(DateValue(varDate))
> & "/" & Year(DateValue(varDate))
> end function
>
> I believe that this is a recognised issue with
Dreamweaver and Access but
> can't seem to grasp the work around! Problem being I am
teaching myself through
> books and internet articles and can be weeks at a time
without being able to
> look at the issue..each time I come back to it it is
like starting all over
> again! I was hoping that somewhere out there there is a
simple solution the
> issue perhaps a date picker with the built in
functionality to address the
> issue...I am keen to understand how to deal with the
issue rather than just
> change my database date field to fudge the problem as I
am in the UK and when I
> eventually start to use the application I would like
there to be some
> consistency with dates and that users are familiar with
the format.
>
> Any help gratefully received!
Its not Dreamweaver, or Access, its your servers locale, its
set to US
format, not the UK.
On your page at the top use:
<% Session.LCID = 2057 %>
This will force the page into using UK formatted dates. Use
it on any
page that needs to format the page correctly.
Dooza
Posting Guidelines
http://www.adobe.com/support/forums/guidelines.html
How To Ask Smart Questions
http://www.catb.org/esr/faqs/smart-questions.html

Data Integration issue with Adobe form

Hi,
We have been using many xACF forms in our WebDynpro java based application.
For one of the xACF adobe form sometimes I'm not getting the data from adobe form to webdynpro context.
Anyone can pls tell what may be the problem other then binding because that part i have already checked and it's working fine in some of the PC.
Regards
Ravindra Singh

Hi Chintan,
thanks for your reply.
I tried that part already by converting xACF form to ZCI but facing issues with the drop-downs.
Actually some of the dropdowns have values more than 1000. The value help for these drop downs comes as pop up in case of ZCI forms and the mazer problem is that in offline scenario doesn't even shows values for such dropdowns as a pop up or normal drop down.
As per the SAP Note 1013227 we are using the enumerated type of drop downs for such larger values but no help in offline scenario. I tried by changing the parameter value in visual admin as suggested in sap note which prevents pop-up for lager values but it's not recommended by SAP. Only because of this issue we are not able to migrate from xACF to ZCI.
Do you have any idea how to get values for such drop downs in offline scenario.
Thanks & Regards
Ravindra Singh

Unicode and non-unicode string data types Issue with 2008 SSIS Package

Hi All,
I am converting a 2005 SSIS Package to 2008. I have a task which has SQL Server as the source and Oracle as the destination. I copy the data from a SQL server view with a field nvarchar(10) to a field of a oracle table varchar(10). The package executes fine
on my local when i use the data transformation task to convert to DT_STR. But when I deploy the dtsx file on the server and try to run from an SQL Job Agent it gives me the unicode and non-unicode string data types error for the field. I have checked the registry
settings and its the same in my local and the server. Tried both the data conversion task and Derived Column task but with no luck. Pls suggest me what changes are required in my package to run it from the SQL Agent Job.
Thanks.

What is Unicode and non Unicode data formats
Unicode :
A Unicode character takes more bytes to store the data in the database. As we all know, many global industries wants to increase their business worldwide and grow at the same time, they would want to widen their business by providing
services to the customers worldwide by supporting different languages like Chinese, Japanese, Korean and Arabic. Many websites these days are supporting international languages to do their business and to attract more and more customers and that makes life
easier for both the parties.
To store the customer data into the database the database must support a mechanism to store the international characters, storing these characters is not easy, and many database vendors have to revised their strategies and come
up with new mechanisms to support or to store these international characters in the database. Some of the big vendors like Oracle, Microsoft, IBM and other database vendors started providing the international character support so that the data can be stored
and retrieved accordingly to avoid any hiccups while doing business with the international customers.
The difference in storing character data between Unicode and non-Unicode depends on whether non-Unicode data is stored by using double-byte character sets. All non-East Asian languages and the Thai language store non-Unicode characters
in single bytes. Therefore, storing these languages as Unicode uses two times the space that is used specifying a non-Unicode code page. On the other hand, the non-Unicode code pages of many other Asian languages specify character storage in double-byte character
sets (DBCS). Therefore, for these languages, there is almost no difference in storage between non-Unicode and Unicode.
Encoding Formats:
Some of the common encoding formats for Unicode are UCS-2, UTF-8, UTF-16, UTF-32 have been made available by database vendors to their customers. For SQL Server 7.0 and higher versions Microsoft uses the encoding format UCS-2 to store the UTF-8 data. Under
this mechanism, all Unicode characters are stored by using 2 bytes.
Unicode data can be encoded in many different ways. UCS-2 and UTF-8 are two common ways to store bit patterns that represent Unicode characters. Microsoft Windows NT, SQL Server, Java, COM, and the SQL Server ODBC driver and OLEDB
provider all internally represent Unicode data as UCS-2.
The options for using SQL Server 7.0 or SQL Server 2000 as a backend server for an application that sends and receives Unicode data that is encoded as UTF-8 include:
For example, if your business is using a website supporting ASP pages, then this is what happens:
If your application uses Active Server Pages (ASP) and you are using Internet Information Server (IIS) 5.0 and Microsoft Windows 2000, you can add "<% Session.Codepage=65001 %>" to your server-side ASP script.
This instructs IIS to convert all dynamically generated strings (example: Response.Write) from UCS-2 to UTF-8 automatically before sending them to the client.
If you do not want to enable sessions, you can alternatively use the server-side directive "<%@ CodePage=65001 %>".
Any UTF-8 data sent from the client to the server via GET or POST is also converted to UCS-2 automatically. The Session.Codepage property is the recommended method to handle UTF-8 data within a web application. This Codepage
setting is not available on IIS 4.0 and Windows NT 4.0.
Sorting and other operations :
The effect of Unicode data on performance is complicated by a variety of factors that include the following:
1. The difference between Unicode sorting rules and non-Unicode sorting rules
2. The difference between sorting double-byte and single-byte characters
3. Code page conversion between client and server
Performing operations like >, <, ORDER BY are resource intensive and will be difficult to get correct results if the codepage conversion between client and server is not available.
Sorting lots of Unicode data can be slower than non-Unicode data, because the data is stored in double bytes. On the other hand, sorting Asian characters in Unicode is faster than sorting Asian DBCS data in a specific code page,
because DBCS data is actually a mixture of single-byte and double-byte widths, while Unicode characters are fixed-width.
Non-Unicode :
Non Unicode is exactly opposite to Unicode. Using non Unicode it is easy to store languages like ‘English’ but not other Asian languages that need more bits to store correctly otherwise truncation will occur.
Now, let’s see some of the advantages of not storing the data in Unicode format:
1. It takes less space to store the data in the database hence we will save lot of hard disk space.
2. Moving of database files from one server to other takes less time.
3. Backup and restore of the database makes huge impact and it is good for DBA’s that it takes less time
Non-Unicode vs. Unicode Data Types: Comparison Chart
The primary difference between unicode and non-Unicode data types is the ability of Unicode to easily handle the storage of foreign language characters which also requires more storage space.
Non-Unicode
Unicode
(char, varchar, text)
(nchar, nvarchar, ntext)
Stores data in fixed or variable length
Same as non-Unicode
char: data is padded with blanks to fill the field size. For example, if a char(10) field contains 5 characters the system will pad it with 5 blanks
nchar: same as char
varchar: stores actual value and does not pad with blanks
nvarchar: same as varchar
requires 1 byte of storage
requires 2 bytes of storage
char and varchar: can store up to 8000 characters
nchar and nvarchar: can store up to 4000 characters
Best suited for US English: "One problem with data types that use 1 byte to encode each character is that the data type can only represent 256 different characters. This forces multiple
encoding specifications (or code pages) for different alphabets such as European alphabets, which are relatively small. It is also impossible to handle systems such as the Japanese Kanji or Korean Hangul alphabets that have thousands of characters."<sup>1</sup>
Best suited for systems that need to support at least one foreign language: "The Unicode specification defines a single encoding scheme for most characters widely used in businesses around the world.
All computers consistently translate the bit patterns in Unicode data into characters using the single Unicode specification. This ensures that the same bit pattern is always converted to the same character on all computers. Data can be freely transferred
from one database or computer to another without concern that the receiving system will translate the bit patterns into characters incorrectly.
https://irfansworld.wordpress.com/2011/01/25/what-is-unicode-and-non-unicode-data-formats/
Thanks Shiven:) If Answer is Helpful, Please Vote

Data Validation issue with Standard Extraction

Hi Experts,
I have a requirement to publish a report in BI from ECC, all the details are coming from this DataSource : 2LIS_02_ITM.
This particular DataSource have the many fields which are from the following tables
EKKO
EKPO
MARA
EKBE
I tried replicating the DataSource in BI and created transformation extracted full data.The number of record the DSO (0PUR_O01) has is 27910.
I checked with the ECC tables. And the number of records they have are
EKKO - 79129
EKPO - 250502
MARA - 40950
EKBE - 1447470
I just don't know how do I check whether BI data is correct with ECC.
Can anyone please tell me how do I reconcile the data.
Thanks

Hi,
you have to check the number of records for the datasource in RSA3 transaction.
Also, check the start routine at transformation level, as well as the selections if you have loaded.
Hope this helps,
Regards,
Rama Murthy.

Date filter issue

Hi all,
I want to filter my report with two date , one is coming from dashboard prompt as presentation variable and other i'm subtracting 7 days from the input date .
Here i'm using filter in advance sql like
"Alerts View".STATUS_DT <= '@{SDate}'
"Alerts View".STATUS_DT >= timestampadd(sql_tsi_day ,-7 ,Date'@{SDate}')
i'm getting date format error , below is the log
Error Codes: YQCO4T56:OPR4ONWY:U9IM8TAC:OI2DL65P
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 46046] Datetime value 5/26/2009 does not match the specified format. (HY000)
SQL Issued: {call NQSGetLevelDrillability('SELECT "Alerts View".REVIEW_ID saw_0, "Alerts View".LAST_ACTVY_TYPE_CD saw_1, "Alerts View".STATUS_DT saw_2, "Alerts View".STATUS_DT saw_3, case when 1=0 then "Alerts View".STATUS_CD else ''Week'' end saw_4 FROM "Common Productivity Reports for Alerts" WHERE ("Alerts View".STATUS_DT <= timestampadd(sql_tsi_day ,0 ,Date''5/26/2009'')) AND ("Alerts View".STATUS_DT >= timestampadd(sql_tsi_day ,-7 ,Date''5/26/2009'')) AND (case when 1=0 then "Alerts View".STATUS_CD else ''Week'' end = ''Week'')')}Please help me if anyone knows.

my bad luck ........ still it did not work . but in that link Goran has written the below msg
Let's change now dateSeparator and dateOrder entries in localedefiniitions.xml to see what will happen. I want to see date in my user friendly format dd.mm.yyyy, with or without leading zeros (01.01.2008 or 1.1.2008), so I changed dateOrder to dmy and dateSeparator to zero (.).
so I changed dateOrder to dmy and dateSeparator to zero (.).
what is the meaning of --> dateSeparator to zero (.).
exactly what to put in dateSeparator tag.
he has clearly written for leading zero , we have to change dateSeparator.

Data load issue with export data source - BW 3.5

Hi,
We are facing issues in loading data with the help of export data source.
We have created export data source of 0PCA_C01 cube. With the help of this export datasource, we are loading data to other custom cube. Scenario is working fine in development server.
But when we transported objects to quality server data is not getting loaded to custom target cube.
It is extracting zero records. All transports are ok and we have generated export datasource in quality before transports .Also regenerated export datasource after transport and activated infosource, update rule via RS* programs. Every object is active but data is not getting extracted.
RSA3 for 80PCA_C01 datasource isn't extracting any record in Quality. Records getting extracted in development. We are in BW 3.5 with patch level 19.
Please guide us to resolve the issue.
Thanks,
Aditya

Hi
Make sure that you have relevant Role & Authorization at Quality/PRS.
You have to Transport the Source Cube first and then Create a Generate Export Data Source in QAS. Then, replicate data sources for BW QAS Soruce System. Make sure this replicated Data Source in QAS. Only then can transport new update rules for second cube.
Hope it helps and clear

Unable to load provider data, syncing issues with update 9.1

Since the install of iTunes 9.1, I have had to reinstall it twice and still get the same issues:
1) Says "iTunes can not sync - disabled on this computer"
2) iTunes was unable to load provider data from sync services.
So I can sync songs, videos, and apps. But can no longer sync calender, contacts, etc... This all started right after the last update, up until then it was fine and no other program changes have been made on the PC.
Reinstalling / repairing iTunes does not resolve the issue. Any ideas on this?

You are not alone that is the same issue I get. It then tells me it can not save the backup to my computer. *** is going on with the 9.1 update!

Filter issues with hidden/visible columns on a table

OK, 1st post to this forum:
This is based on:
http://labs.adobe.com/technologies/spry/samples/data_region/SpryPagedViewSample.html
I have a contact list that has contact info on it (office
phone, home phone, cell phone, etc). There are several hundred
entries in the .xml file. As a default, I am putting the contacts
in a table that has the office phone and email address visible, and
the other info hidden. I have a "ShowDetail" checkbox that will
allow the hidden columns to be visible and vice versa by using the
addClassName and removeClassName.
The issue I have, is that when you start typing in an contact
name when the checkbox is checked, the table flashes the correct
info up with the columns visible, but then the HTML is rendered and
the Hidden class is reassigned to the columns.
Is there anyway to run the javascript function that toggles
the class after the HTML is rendered based on the checked status of
the checkbox? Thanks for any help!

Thanks for the reponse. However here is the syntax I need to edit
SELECT u.user# as "UID",
lower(u.name) as owner,
lower(t.name) as table_name,
col.col# as column_id,
lower(col.name) as column_name,
decode(col.type#,
1, 'varchar2',
2, decode(col.scale,
null, decode(col.precision#, null, 'number', 'float'),
'number'),
8, 'long',
9, 'varchar',
12, 'date',
23, 'raw',
24, 'long raw',
69, 'rowid',
96,'char',
105, 'mlslabel',
106, 'mlslabel',
'undefined') as data_type, /* these decodes come from the view */
/* definition for DBA_TAB_COLUMNS */
/* in CATALOG.SQL for version 7.3 */
/* the next two decodes are derived from the actual queries performed by Storage */
/* when Manager retrieving column information. */
decode(nvl(col.precision#, 0),
0, col.length,
nvl(col.precision#,0)) as data_length,
to_number(decode(nvl(col.precision#, 0),
0, null,
decode(col.type#,
2, nvl(col.scale,-127/*MAXSB1MINAL*/),
0) ) ) as scale,
decode(col.null$, 1, 'n', null) as nulls,
'y' as in_primary_key
FROM sys.col$ col,
sys.obj$ t,
sys.user$ u
WHERE u.user# = t.owner# /* user$ will be the driving table because no index on user# */
AND t.obj# = col.obj#
AND u.name = 'POWERSELLER' /* We only care about PowerSeller tables/columns; */
AND t.type# in (2, 4) /* Tables and views only */
AND EXISTS (SELECT 1
FROM sys.ccol$ ns_ccol,
sys.cdef$ ns_cdef,
sys.obj$ ns_t,
sys.user$ ns_u
WHERE ns_u.user# = ns_t.owner#
AND ns_t.obj# = ns_cdef.obj#
AND ns_cdef.con# = ns_ccol.con#
AND ns_u.name = 'POWERSELLER'
AND ns_cdef.type# = 2 /* primary key constraint */
AND ns_cdef.enabled is not null
AND ns_ccol.obj# = t.obj# /* using ns_ccol instead of ns_t */
/* does 70% as many logical reads */
AND ns_ccol.col# = col.col#
)

Date Format Issue with Interactive Form

Hi, here is the scenario:
-We just upgraded to SP17 from SP15
-I'm using Livecycle Designer 8.0
When we were on SP15, this was not an issue. I was wondering if anyone encountered this problem and if so, if there is a workaround?
I create an interactive form to start a guided procedure process. Im passing the data from my desktop Interactive form to another callable object in GP to send an email with the PDF attached. This all works correclty.
My date/time fields are set to type DATE with a display pattern of YYYY-MM-DD. When I create the form in the GP administrator to my desktop and open the PDF, the date format is correct. However, when I submit the form to start the process, the incomming date fields to be mapped to my second Callable Object have change in format from "2009-02-18" to "Wed Feb 18 00:00:00 EST 2009".
This is true in the new form I receive via email, and also in NWA->monitoring->guided procedures when I check the instances. The input mapping is already set to the false formatting.
When I open the form from the second callable object with the incorrect date format (in designer), the date's display patterns are set to YYYY-MM-DD but are not being displayed as such.
New discovery....I tried to create a Business Logic callable object and format the date. I created a string input and date output and mapped them accordingly. When I perform a "TEST" from the design time and use the input "Wed Feb 18 00:00:00 EST 2009", the string is automatically converted to 18/02/2009 in the output, which is what I want to occur. The only problem is when I run the actual process, the same "Wed Feb 18 00:00:00 EST 2009" is being output instead of the 18/02/2009 in the TEST.
Anyone have any ideas?
Thanks.
Edited by: Warren Clements on Feb 26, 2009 2:20 AM

This test program might help...
import java.util.*;
import java.text.*;
public class ExpandYear
    public static void main(String[] args) throws ParseException
     SimpleDateFormat sdf_2dyear = new SimpleDateFormat("MM/dd/yy");
     SimpleDateFormat sdf_4dyear = new SimpleDateFormat("MM/dd/yyyy");
     String test1 = "3/21/00";
     System.out.println("test1: " + test1 + " to : " +
                  sdf_4dyear.format(sdf_2dyear.parse(test1)));
     String test2 = "4/9/99";
     System.out.println("test2: " + test2 + " to : " +
                  sdf_4dyear.format(sdf_2dyear.parse(test2)));

Sql loader - Data loading issue with no fixed record length

Hi All,
I am trying to load the following data through sql loader. However the records # 1, 3 & 4 are only loading succesfully into the table and rest of the records showing as BAD. What is missing in my syntax?
.ctl file:
LOAD DATA
INFILE 'C:\data.txt'
BADFILE 'c:\data.BAD'
DISCARDFILE 'c:\data.DSC' DISCARDMAX 50000
INTO TABLE icap_gcims
TRAILING NULLCOLS
     CUST_NBR_MAIN          POSITION(1:9) CHAR NULLIF (CUST_NBR_MAIN=BLANKS),
     CONTACT_TYPE          POSITION(10:11) CHAR NULLIF (CONTACT_TYPE=BLANKS),
     INQUIRY_TYPE          POSITION(12:13) CHAR NULLIF (INQUIRY_TYPE=BLANKS),
     INQUIRY_MODEL          POSITION(14:20) CHAR NULLIF (INQUIRY_MODEL=BLANKS),
     INQUIRY_COMMENTS     POSITION(21:60) CHAR NULLIF (INQUIRY_COMMENTS=BLANKS),
     OTHER_COLOUR POSITION(61:75) CHAR NULLIF (OTHER_COLOUR=BLANKS),
     OTHER_MAKE          POSITION(76:89) CHAR NULLIF (OTHER_MAKE=BLANKS),
     OTHER_MODEL_DESCRIPTION POSITION(90:109) CHAR NULLIF (OTHER_MODEL_DESCRIPTION=BLANKS),
     OTHER_MODEL_YEAR POSITION(110:111) CHAR NULLIF (OTHER_MODEL_YEAR=BLANKS)
data.txt file:
000000831KHAN
000000900UHFA WANTS NEW WARRANTY ID 000001017OHAL
000001110KHAP
000001812NHDE231291COST OF SERVICE INSPECTIONS TOO HIGH MAXIMA 92 MK
000002015TPFA910115CUST UPSET WITH AIRPORT DLR. $200 FOR PLUGS,OIL,FILTER CHANGE. FW
Thanks,

Hi,
Better if you have given the table structure, I check your script it was fine
11:39:01 pavan_Real>create table test1(
11:39:02   2 CUST_NBR_MAIN varchar2(50),
11:39:02   3 CONTACT_TYPE varchar2(50),
11:39:02   4 INQUIRY_TYPE varchar2(50),
11:39:02   5 INQUIRY_MODEL varchar2(50),
11:39:02   6 INQUIRY_COMMENTS varchar2(50),
11:39:02   7 OTHER_COLOUR varchar2(50),
11:39:02   8 OTHER_MAKE varchar2(50),
11:39:02   9 OTHER_MODEL_DESCRIPTION varchar2(50),
11:39:02 10 OTHER_MODEL_YEAR varchar2(50)
11:39:02 11 );
Table created.
11:39:13 pavan_Real>select * from test1;
no rows selected
C:\Documents and Settings\ivy3905>sqlldr ara/ara@pavan_real
control = C:\control.ctl
SQL*Loader: Release 9.2.0.1.0 - Production on Sat Sep 12 11:41:27 2009
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Commit point reached - logical record count 5
11:42:20 pavan_Real>select count(*) from test1;
COUNT(*)
         5    control.ctl
LOAD DATA
INFILE 'C:\data.txt'
BADFILE 'c:\data.BAD'
DISCARDFILE 'c:\data.DSC' DISCARDMAX 50000
INTO TABLE test1
TRAILING NULLCOLS
CUST_NBR_MAIN POSITION(1:9) CHAR NULLIF (CUST_NBR_MAIN=BLANKS),
CONTACT_TYPE POSITION(10:11) CHAR NULLIF (CONTACT_TYPE=BLANKS),
INQUIRY_TYPE POSITION(12:13) CHAR NULLIF (INQUIRY_TYPE=BLANKS),
INQUIRY_MODEL POSITION(14:20) CHAR NULLIF (INQUIRY_MODEL=BLANKS),
INQUIRY_COMMENTS POSITION(21:60) CHAR NULLIF (INQUIRY_COMMENTS=BLANKS),
OTHER_COLOUR POSITION(61:75) CHAR NULLIF (OTHER_COLOUR=BLANKS),
OTHER_MAKE POSITION(76:89) CHAR NULLIF (OTHER_MAKE=BLANKS),
OTHER_MODEL_DESCRIPTION POSITION(90:109) CHAR NULLIF (OTHER_MODEL_DESCRIPTION=BLANKS),
OTHER_MODEL_YEAR POSITION(110:111) CHAR NULLIF (OTHER_MODEL_YEAR=BLANKS)
data.txt
000000831KHAN
000000900UHFA WANTS NEW WARRANTY ID 000001017OHAL
000001110KHAP
000001812NHDE231291COST OF SERVICE INSPECTIONS TOO HIGH MAXIMA 92 MK
000002015TPFA910115CUST UPSET WITH AIRPORT DLR. $200 FOR PLUGS,OIL,FILTER CHANGE. FW
CUST_NBR_MAIN     CONTACT_TYPE     INQUIRY_TYPE     INQUIRY_MODEL     INQUIRY_COMMENTS     OTHER_COLOUR     OTHER_MAKE     OTHER_MODEL_DESCRIPTION     OTHER_MODEL_YEAR
000000831     KH     AN     NULL     NULL     NULL     NULL     NULL     NULL
000000900     UH     FA      WANTS     NEW WARRANTY ID 000001017OHAL     NULL     NULL     NULL     NULL
000001110     KH     AP     NULL     NULL     NULL     NULL     NULL     NULL
000001812     NH     DE     231291C     OST OF SERVICE INSPECTIONS TOO HIGH MAXI     MA 92 MK     NULL     NULL     NULL
000002015     TP     FA     910115C     UST UPSET WITH AIRPORT DLR. $200 FOR PLU     GS,OIL,FILTER C     HANGE. FW     NULL     NULL- Pavan Kumar N
Edited by: Pavan Kumar on Sep 12, 2009 11:46 AM

Data Pump issue with nls date format

Hi Friends,
I have a database with nls date format 'DD/MM/YYYY HH24:MI:SS' from where I wish to take export from. I have a target database with nls date format 'YYYY/MM/DD HH24:MI:SS' . I have a few tables whose create statements have some date fields with DEFAULT '01-Jan-1950' and these CREATE TABLE statements when processed by Data pump is getting failed in my target database. These tables are not getting created due to this error
Failing sql is:
CREATE TABLE "MCS_OWNER"."SECTOR_BLOCK_PEAK" ("AIRPORT_DEPART" VARCHAR2(4) NOT NULL ENABLE, "AIRPORT_ARRIVE" VARCHAR2(4) NOT NULL ENABLE, "CARRIER_CODE" VARCHAR2(3) NOT NULL ENABLE, "AC_TYPE_IATA" VARCHAR2(3) NOT NULL ENABLE, "PEAK_START" VARCHAR2(25) NOT NULL ENABLE, "PEAK_END" VARCHAR2(25), "BLOCK_TIME" VARCHAR2(25), "FLIGHT_TIME" VARCHAR2(25), "SEASON" VARC
ORA-39083: Object type TABLE failed to create with error:
ORA-01858: a non-numeric character was found where a numeric was expected
The table create sql which adds a column as ' VALID_FROM DATE DEFAULT '01-jan-1970' ' which I think is the issue. Appreciate if someone can suggest a way to get around with this. I have tried altering the nls of source db to be same as target database. Still the impdp fails.
Database is 10.2.0.1.0 on Linux X86 64 bit.
Thanks,
SSN
Edited by: SSNair on Oct 27, 2010 8:25 AM

Appreciate if someone can suggest a way to get around with this.change the DDL that CREATE TABLE to include TO_DATE() function.
With Oracle characters between single quote marks are STRINGS!
'This is a string, 2009-12-31, not a date'
When a DATE datatype is desired, then use TO_DATE() function.

Date Filter issues in MII Messaging

Hi all,
We have an issue on a newly commissioned MII server (12.1.5 build 99; Windows Server 2008 R2, SQL Server 2008) whereby date filters (From Date; To Date) are set to the incorrect format in the MII Message Monitor query form. The filters default to M D Y format and we require D M Y format. Date is stored correctly in the db table.
Where is this configuration set?
In addition to this I note that there numerous warning entries in the MII log of the type '** MISSING RESOURCE: Unable to localize ,< object name>'* where object name seems to be referring to a number of date/time type ojects (eg XCOL_MON, XSLT_TODAY,XLST_DECEMBER etc etc). This seems related to the first problem, if only in problem domain. How do we address this?

Thanks Mike,
I have been through almost the entire Netweaver Admin cockpit, including the UME, and again with an experienced NW admin but cannot locate where these defaults are set.
Can you point me to where this is configured, please?
Mark

Data Filter issue with

Similar Messages

Maybe you are looking for