Data Finder queries can only be done on properties?
Is it not possible to search for specific channel values to find data sets that I want to load? I can't seem to formulate a query to do it.
It seems like only properties can be searched.
For ex, I have data logs of software program crashes, which store things like CreatorID of software, timestamps, CrashStrings, etc. I want to search on those files and narrow down the possible files to load based on info in the channels.
I don't have to make all the data a property to search for it do I?
Hi jsmalley,
The DataFinder only searches on named scalar properties stored at the File, Group, and Channel levels. The DataFinder does not index the data values attached to each Channel, so these are not in the data base and therefore can not be part of the search expression. The advantage of this approach is that if you don't want to search on your data values, then you're not cluttering up your data base with zillions of measurement values that just make all the queries run slowly.
If you do want to search on measurement values, there are ways of coaxing the DataFinder into indexing the measurement values, through what is called a "Post-Processing DataPlugin", which is available in DIAdem 10.2 and later versions. This approach is not obvious, and it tends to cause the data index to baloon very quickly to large disk footprints, but it can be the right approach for specific cases if it is employed correctly.
Why don't you give me a call or an email, and we can talk about exactly which data values you want to search on in your data sets. I would be happy to help you construct a "Post-Processing DataPlugin" based on the outcome of that discussion.
Brad Turpin
DIAdem Product Support Engineer
National Instuments
[email protected]
Similar Messages
-
I've had two lapstops die within the last seven months. Last time I had to "deauthorize" all five computers, then re-up, since I couldn't deauthorize from the dead laptop. Now I need to go through it all again, but I understand that this can only be done once every 12 months. What else can I do? Can I get into the account and just deauhorize the dead computer?
You can try contacting Apple and explain that you have been using Windows PCs that last only a few months before failing. Perhaps they will make an exception to the 12 month wait.
-
Since upgrading Iphone to iOS 5.1.1 it does not automatically divert to my wi-fi internet when wifi is available in my home. It has been draining my mobile data I now have very high bills from my mobile carrier for high data usage. I can only manually change settings in the Network and turn cellular data on and off everytime I get home and leave the home. This is very frustrating as it wasn't a problem until the upgrade. I have spoken to a few people that this has happened to. Has anyone found this problem and does anyone have other solutions?
Please disregard this question. I'll submit a shorter and more direct question. Thanks.
-
The Find bar opens OK with Edit/Find. I start typing in a word there but it will only allow 3 letters before they disappear and my next keystroke appears. I can copy/paste a whole word or string of words into the Find bar and all the letters remain.
== This happened ==
Every time Firefox opened
== about a month agoSee [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") -
Is this can only be done through Java mapping?
Hi Friends,
my scenario is jdbc to idoc.
Am able to create multiple idocs basing upon delivery_date. But here my requirement is -- there are qty, slnumber, vaxinum are having different values. And all these should also be generated in the same Idoc.
INPUT
delivery_date ------ qty -------- slnumber -------- vaxinum
19/02/2006 ------ 10 ---------- 457854 --------- 10001
19/02/2006 ------ 20 ---------- 457855 --------- 10001
19/02/2006 ------ 30 ---------- 457854 --------- 10001
19/02/2004 ------ 20 ---------- 457854 --------- 10001
19/02/2004 ------ 20 ---------- 457854 --------- 10001
19/02/2005 ------ 20 ---------- 457854 --------- 10001
OUTPUT
Three Idoc's to be created -- am able to create it basing upon delivery_date.
But for 19/02/2006 this Idoc number there are different qty and different slnumber. So, I want to be created multiple segments in the same IDoc.
Thanks.
S.
Edited by: Swarna on Sep 21, 2011 1:29 PMHi Swarna,
Please try with the below logic.
DeliveryDate-->removecontext->sort->splitbyvaluechange->collapsecontext---IDOC
concatsortUDFSegment
coacat:
Input1-OutputofFormatByExample1sort
Input2-OutputofFormatByExample2sort
FormatByExample1:
input1:outputofsortbykey2
input2:DeliverNo-removecontext-sort--splitbyvaluechange
FormatByExample2:
input1:outputofsortbykey1
input2:DeliverNo-removecontext-sort--splitbyvaluechange
sortbykey1:
input1:DeliveryNo--removeContext
input2:SlNumber--removecontext
sortbykey2:
input1:DeliveryNo--removeContext
input2:qty--removecontext
*ExecutionType of UDF is all values of context*
public void UDF(String[] var1, ResultList result, Container container) throws StreamTransformationException{
ArrayList aList = new ArrayList();
for(int i=0;i<var1.length;i++){
if(aList.contains(var1<i>))
continue;
else{
aList.add(var1<i>);
result.addValue(var1<i>);
Thanks
Priyanka -
Hard drive says its full but I can only find 44G used!
I knew the day would come when I filled my 80G hard drive. But when I look at the HD space occupied by each of the files in Finder I can only account for 44G used! - where is the missing 36?
Also how easy is it to use an external hard drive for music/photos etc?
Many thanks.You can relocate iTunes and iPhoto libraries to an
externally enclosed hard disk drive; there are some
rules and considerations, such as they go, so the
computer won't be making duplicates to its internal
hard disk drive, since you'd want to keep it slim.
A search online should yield a few fairly well founded
replies to relocating or archiving these libraries.
You may be able to view the Hard Disk Drive as a List
and see if you can find an entry for large blocks of items
that may not be otherwise noted; but this may not be a
way to go. There had been utilities to help find and fix
the issue of lost space on a hard drive.
Sometimes, a 'previous system' folder may be using some.
Or an older anti-virus program (norton) may waste space.
You may need to consider a really decent external HDD
enclosure that can support full clones of everything; be
sure the enclosed drive circuitry supports Mac OS X boot
capabilities. Then make a clone (carbon copy cloner) of
the entire contents to a prepared external drive, test it and
be sure tor repair disk permissions on the booted clone.
PPC Macs generally require FW400/800 external enclosure
devices to support OS X booting; later ones USB2.0.
And then use Disk Utility from the clone or booted install DVD
and use its Secure Erase to overwrite 7-passes of zeros over
the hard drive contents, then use the Partition Map tool to give
it a suitable partition map scheme for the hardware involved,
plus Format the drive to HFS+ Journaled, and either move the
clone back in, or reinstall a completely new system from scratch.
This may be a better way, and in the process, give the old HDD
a workout to see if it isn't just getting old and starting to fail. If so,
you could consider a larger external (partition into two, if big) and
run the computer from there, if you don't want to take apart the
iMac and replace the original hard drive with a larger/faster one.
Anyway, have fun.
Good luck & happy computing! -
I have installed the latest version of iOS in my ipad but forgot to backup the content, what should i do!!! I don't want my media and other data erased, how can i find back all the data in my ipad? I haven't restore ipad yet, so any others way can be use? Now my ipad is in recovery mode.
Once you are in Recovery Mode, it's too late to do any backup. I am afraid you are going to lose your data.
-
i am unable to find icloud in my system preferences. What do i do? I don't have time to get to apple until next week and now im going to lose a bunch of data bc i can't update my icloud starage.
You say you have iOS6: you can perfectly well pay to extend your free storage as an ex-MobileMe subscriber.
If you wish to continue your current storage level, the instructions are here:
http://support.apple.com/kb/HT5527
Scroll down to 'How do I purchase my current plan?' and expand the section applicable to iOS. -
Looking at getting a used iPhone so I can use it in WIFI spots but I don't want to pay for data. Wondering if I can do it without it costing me anything.
there is many ways you can do this . but as Tidbits stated ,, if you were to switch from what ever phone you are using to a smart phone like the iPhone.. you will be paying for the phone service.. and additional amount because it is a smartphone.. then there is a data plan... so .. it will have all the features you are looking at using the phone to obtain the services from a wifi or hot spot.. .. than the USED iphone you are referring to MUST be one that belong to Verizon ( the last time I look you can only program a phone,,new or used that was originally theirs)... have you considered looking into getting a USB modem?? they are listed above under your acct My Verizon..SHOP... PHONE & DEVICES .... INTERNET ... .. unfortunately.. all smartphones that are activated will be programmed with all features ..at least with Verizon.. and most of the larger carriers..
hope that helps with any additional questions.. you may have.. if not ..let us know and we will make sure..all is covered for you .. -
I deleted some phone records (call numbers, dates) & texts. Can I access them from back-up without restoring the phone. Don't want to alter what I have, just find what I later deleted
Without "pretending" to be yourself on the other phone (change settings) there's nothing else you can do.
iOS devices are meant to be single user and can't view iCloud.com the same way a Mac or PC can do.
You need to find a desktop or laptop machine (Mac or PC) to log in at iCloud. -
Multiple MIDI takes on the same track - can only find one in the editor?
After making several passes on an instrument track w/drum sampler on it I opened the piano roll editor to edit the data only to find only one of the passes represented there. I could only find the other passes when I moved the current one out of the track temporarily. There must be a better way to do this, can anyone hip me to the right way to edit all the data in the multiple passes at the same time? I can hear all the data, I just can't see all of it.
I'm doing this so I only have to instantiate the Virtual Instrument once in the session, CPU is always at a premium these days. I have done the bulk of my work in recent years in ProTools but I have found Logic Express 8 to be far more efficient with CPU load on my core 2 duo Macbook. I suspect I'm just missing something but I cannot seem to figure it out. Help?I appreciate your comments but my issue was in editing the already recorded tracks. If you can find in those pages where it shows how to view all the data from the already recorded multiple MIDI tracks at the same time in the piano roll window and be able to edit them I'd be much obliged if you would point those out to me. I double checked your recommendation after reading your first reply, the answer I needed was not there.
Evidently you can only select and view one region at a time no matter how many there are in the same track. I have searched the LE 8 pdf manual and also searched thru an Apple Logic Pro Training series book for version 7 JIC it had some additional insight into this particular issue and came up empty, that's why I was asking for additional insight on this panel. I always go to the documentation first - RTFM is first call for me.
I've already figured the workaround and I'll know better next time to allow Logic to create its own multiple take folders so as far as I'm concerned this case is closed. Thank you again for your input. -
I upgraded to the new IOS, but lost data and apps. When I try and restore the only backup I see is the one it made AFTER the lost data. How can I access an older backup from the cloud?
Why don't you talk to apple and find out if backup exists? That conversation with apple will stop your guessing.
-
My iphone backup on icloud is gone, I can only find my ipad backup
Ok, so I have an old iphone 3GS, my daughter has an ipad mini. We are both using the same apple ID and it is causing me no end of grief. Most recently, my phone is currently doing a constant cycle between the boot screen and the lock screen. I have no itunes backup available for if I restore my phone, and I don't want to lose all my photos especially. My last icloud backup was a couple of months ago, but if I go to icloud, I can only find the backups from my daughter's ipad, nothing from my iphone. Please help!! I don't want to lose all my pics of my new baby girl!!!
Do you use PhotoStream? If so, the photos might be there. I hate to tell you but your data on the phone may already be gone and a restore may be your only option at this point. This is why regular backups are so important. You can try a reset of the device to try & get it stabilized: hold down the power & home buttons until the Apple logo shows, then let go.
-
Message 'can only work in client 001 during data transfer
Hello Experts,
Recently I setup a interface between ECC and SCM system for EWM, my data transfer was working fine until last couple of days when I getting this error message on the SCM side.
Message in CFM2 comes up as
Function/Q/SAPAPO/CIF_LOC_INBOUND
Text: You can only work in client 001
And not sure why because I have not made any changes to settings.
Can someone please suggest what might be going wrong and what needs to be done?
Thanks
BhaskarHi Bhaskar,
I have not worked on EWM, and don't know if CIF connectivity is used differently.
But let me try to propose a general way forward based on your error message.
It seems that your CIF data is trying to reach a client where you are not authorized to work, or where CIF settings are not maintained properly.
Should be linked to RFC connectivity between R/3 and APO (unless it's due to some SAP bug).
Check out the following:
1) Which APO client is your CIF model pointing to? You would most likely be able to find this out by seeing the name of "logical system" for your CIF Integration Model (IM). It seems the CIF IM is pointing to some client which is something other than client 001.
Also, my guess would be that this client that you maintained in CIF IM is no longer having settings relevant for CIF, or something else.
2) Go to your APO system, and again cross-check which client you are using. Next go to /n/sapapo/cq and see which R/3 systems are having active connections to your APO system. The "logical system" corresponding to your R/3 system/client should be there in the list. if not, ask your Basis team if they made any changes recently.
PS: I would assume that you should get this same error for CIF of any object, not only material (unless the corresponding IM points to a different client in APO).
Let me know the results of your checks, and if this helps you in finding out the root cause.
PS: Logical system normally would have a naming convention like <System name>CL<Client>. e.g. PR1CL310. Here PR1 is system name and client is 310.
Thanks - Pawan -
How can I synchronize my iPhoto events? my iTunes doesn't read them and with the app Images in the iPad I can only find Photos, Albums, Faces and Places, not Events.
I had a problem a couple of months ago when iPhotos suddenly rearranged the order of my Events (Why won't iPhoto let me arrange my photos?) . I was told "Use albums not events - events are not a good way to organize - albums and folder are designed for organisation and are very flexible".
Haha! I should have paid attention and read between the lines! My iPhotos were highly organised groupings - not according to date but the way I wanted them - and it was so easy to do! I see now that if I had them all in albums, as per the Apple Apologist suggestion, I wouldn't have this unholy mess I have been left with just to make iPhone & iCloud users happy. I am now going through Photos and making Albums (of what used to be in my Events) ... maybe I'll get this finished before they do another non user friendly update!
Maybe you are looking for
-
How can I download apps on my old ipod touch? It tells me I need iPhone3.0 software, but iTunes tells me I have the latest available (software 2.2.1) for my iPod.
-
My ipad screen is full of horizontal lines
My ipad screen is full of horizontal lines & it wont switch off. Even after force close, when i restart, the lines are still there ? What do I do ? Regards Sumit
-
Wehen come the Update for Retina Display?
When come the update for Retina Display?
-
Pop-Over in scrolling sidebar text?
While it's no problem to embed a graphic locked to scrollable text in a scrolling sidebar, it doesn't seem possible, natively, in Author to make this graphic a "hotspot" to trigger a pop-over.... basically placing a widget (pop-over) within a widget
-
I'm using the latest (updated) Contribute CS5 trial. I've tried to edit articles from two different Google Blogger blogs, and while it initially connects just fine, downloads the templates just fine, and displays the blog home page just fine, any att