Data for 0ACCNT_GRPV not visible in 0CREDITOR
Dear BW Gurus,
I have a report that has 0CREDITOR as a characteristic and it has a display attribute 0ACCNT_GRPV. 0ACCNT_GRPV did not have master data previously so i loaded master data (texts) into it and activated it. I also activated 0CREDITOR once again. Now i see the master data in 0ACCNT_GRPV. But in the master data for 0CREDITOR, i cannot see the values for 0ACCNT_GRPV. Can somebody throw some light on this?
Thanks for all the help.
Raj
Hi Raj,
No. The data for the attribute "0ACCNT_GRPV" would be loaded when you load the 0CREDITOR master data. The 0ACCNT_GRPV text data would be picked up for the master data loaded in 0CREDITOR.
Hope this make it clear.
Now to resolve your issue. You have two choices:
1. If your 0CREDITOR extractor can bring in the values for 0ACCNT_GRPV then that would be the ideal situation. So you need to check in R/3 for this.
2. In case the extractor cannot bring in 0ACCNT_GRPV values then you need to write an ABAP routine in the transfer rules of 0CREDITOR where you would pull in the 0ACCT_GRPV values based on some logic.
Bye
Dinesh
Similar Messages
-
Data for 2LIS_03_BX not visible in rsa3
I am loading data for 0IC_C03 cube. For the same I am doing setup table filling activity.
Tto initialize the stock I ran satup table for 2LIS_03_BX and I got 150 records transfered to BW extraction. now when I execute rsa3 transaction to check the records for 2LIS_03_BX I can see 0 records extracted.
What would be the problem?
Regards,
Nirav ShahHI
you can get good information in below discussion:
How to view setup table data????????????
How to cross check setup table data
how to check filling setup table successfull
Ravi -
How do I get my mms text to work with net10? Cellular data network is not visible on my iPhone 4.
After hours restoring phone and resetting all my accounts and settings the Bluetooth is back on. Not sure how long this will last. In regards to AirPlay taking over, I had to drive far enough from our wifi signal to allow the Bluetooth to take back the audio. Its working for now.
-
Sales area data view is not visible
Hi All,
the salea area data view is not visible for all BP roles in BP master data
please help me how can i need to put in a visiblehi
sales area data tab is not visible for each and every BP role,
it is visible for sold to party,ship to party roles,
there is aview associated with this role that is CRM 000
if you want to have sales area data tab visible in the role like BP general you have to assign this view to your role
but i should make you one thing very clear that sales area data tab is meant for the customer who has purchased the order and final order has been given and within this tab you have each and every info regarding the sales office,sales group etc that where the order is to be delieverd or purchased from,
once a final order is given it can be sold to party role,ship to party role or bill payable role ,u urself tell in the role of customer how can u see the sales info if the customer hasnt purchased the order ,
likewise the consumer role also has sales data info so sales area data tab is visible in this role too
hope it clears all your doubt,
in case of any doubt do revert back
best regards
ashish -
Error while running Validation Data for category not found in application
Dear Experts
While running Validation and IC Matching I am getting Error i.e. "Data for category not found in application CONSOLIDATION"
May some one tell me the reason and resolution.
Thanks
RiteshHi RItesh,
I suppose your problem was solved in the meanwhile.
Anyway we had the same issue, when running Validations against ICMatching App.
That was because Method VALIDATION of Class CL_UJP_VALIDATE tries to relevant data in order to perform calculations (line 127), but if no data is found, ends raising an exception (with a misleading text line 143).
read_trans_data_sqe( exporting i_application = d_application
it_dim_list = dt_app_dim_list
it_sel = lt_sel
importing
er_t_data = lr_data
assign lr_data->* to <lt_finance>.
create data lr_data like line of <lt_finance>.
assign lr_data->* to <ls_finance>.
lr_data1 = lr_data.
if <lt_finance> is initial.
NO DATA FOUND -> EXCEPTION
raise exception type cx_ujp_process_exception
exporting textid = cx_ujp_process_exception=>ex_no_data_found
d_application = d_application
d_value = l_value.
endif.
Hope it helps
GFV -
Validation- RUN_LOGIC:Data for category not found in application T_SALES
In BPC NW 7.5...
I set up the validation business rules to check that Account A = Account B. When I run the validation package through DM, I got the error that stating RUN_LOGIC:Data for category not found in application T_SALES. I have 3 members in my Category dimension: ACTUAL, FORECAST and PLAN. The same error appeared even if I hardcoded the category member in the script logic:
*RUN_PROGRAM VALIDATION
CATEGORY = %T_CAT_SET%
CURRENCY = %RPTCURRENCY_SET%
OTHER = [ENTITY=%P_CC_SET%]
TID_RA = %TIME_SET%
*ENDRUN_PROGRAM
Do you guys have any clue on the error?
Thanks in all advances,
Yen LiHello,
this error isn´t about category dimension. The system checks if all needed dimensions exists, and if not it gives this error. You can use debug to seach for the dimension in fault.
Best Regards,
António -
Data Type Enhancement not visible in SPROXY
Hi All,
We are implementing SRM 7.0 with PI 7.1.
We have a reuiquirement of adding custom fields in the standard message DespatchedDeliveryNotification_Out which is sent from SRM SUS. I have created the data type enhancement in the ESR in the namespace http://sap.com/xi/SRM/SupplierEnablement/Global
for the data type DespatchedDeliveryNotification. But the Data Type Enhancement is not visible in transaction SPROXY in the SRM server.
Is this the way to do it? Or there is some different method to be followed?
Please advise.
Regards,
Karen PereiraIs this thread still valid? If not, please close the thread.
If so, as no response has been submitted, please rephrase your question and/or provide further information to describe your requirement.
Thanks
Jason
SDN SRM Moderator Team -
Header Data badi button not visible in webdynpro portal view
Hi,
We have implemented "HRHAP00_ADD_HEADER " for fetching additonal data for appraisee in objective setting appraisal.
Badi is fetching data and show button " Additoanl data " in R/3 view , but the button is not visible in ESS, MSS view.
We are using Webdynpro platform.
Has anybody face similar kind of problem in webdynpro? how to address this.
regards
PallaviHi Ana,
Standard button is available info but it is not showing cutom fileds.
Technical resources has made zimplementation of standard badi header data, but when we try to attach it to templte id doesnt show button.
regards
Pallavi -
[Solved]Web Service Data Control operation not visible in Data Controls
Hi!
I've created Web Service Data Control (named MyDataControl ) in my DataModel project for my web application (ADF BC 10.1.3.3). I've finished the wizard successfully (added initiate operation to the right side in step 2: Data Control Operations) but when the wizard finishes the initiate operation is not visible in the Data Controls (MyDataControl is visible without the operation). I'm using CVS so I think maybe some files were write protected while creating the control.
These are the files where Data Control is written to:
DataControls.dcx:
<AdapterDataControl id="MyDataControl" FactoryClass="oracle.adf.model.adapter.DataControlFactoryImpl"
ImplDef="oracle.adfinternal.model.adapter.webservice.WSDefinition" SupportsTransactions="false"
SupportsSortCollection="false" SupportsResetState="false" SupportsRangesize="false"
SupportsFindMode="false" SupportsUpdates="false" Definition="MyDataControl"
BeanClass="MyDataControl" xmlns="http://xmlns.oracle.com/adfm/datacontrol">
<Source>
<definition xmlns="http://xmlns.oracle.com/adfm/adapter/webservice" name="MyDataControl" version="1.0"
provider="oracle.adfinternal.model.adapter.webservice.provider.soap.SOAPProvider"
wsdl="my_wsdl_location">
<service name="MyService" namespace="urn:eu.emsa.ssn" connection="MyDataControl">
<port name="MyServicePort">
<operation name="initiateMyService">
<dataformat format="XML"/>
</operation>
</port>
</service>
</definition>
</Source>
</AdapterDataControl>and MyDataControl.xml:
<?xml version="1.0" encoding="UTF-8" ?>
<JavaBean xmlns="http://xmlns.oracle.com/adfm/beanmodel" version="10.1.3.41.57" id="MyDataControl"
BeanClass="MyDataControl" isJavaBased="false">
<MethodAccessor id="initiateMyService">
<ParameterInfo id="ReplyTo_Address" Type="java.lang.String" isStructured="false"/>
<ParameterInfo id="ReplyTo_PortType" Type="java.lang.String" isStructured="false"/>
<ParameterInfo id="ReplyTo_ServiceName_PortName" Type="java.lang.Object" isStructured="false"/>
<ParameterInfo id="ReplyTo_ServiceName" Type="java.lang.String" isStructured="false"/>
<ParameterInfo id="MessageID" Type="java.lang.String" isStructured="false"/>
<ParameterInfo id="payload" Type="java.lang.String" isStructured="false"/>
</MethodAccessor>
</JavaBean>A couple of days ago I've created a Data Control for another BPEL process the same way and everything was OK.
Any ideas why this is not working?
Regards!
BB
Message was edited by:
BrokenboneFound out the reason. The problem was in ...MyApp\.adf\META-INF\connections.xml file which had write protection.
BB -
[Solved]WS Data Control operation not visible in Data Controls in JDev
Hi!
I've created Web Service Data Control (named MyDataControl ) in my DataModel project for my web application (ADF BC 10.1.3.3). I've finished the wizard successfully (added initiate operation to the right side in step 2: Data Control Operations) but when the wizard finishes the initiate operation is not visible in the Data Controls (MyDataControl is visible without the operation). I tried on JDev forum but had no success.
DataControls.dcx:
<AdapterDataControl id="MyDataControl" FactoryClass="oracle.adf.model.adapter.DataControlFactoryImpl"
ImplDef="oracle.adfinternal.model.adapter.webservice.WSDefinition" SupportsTransactions="false"
SupportsSortCollection="false" SupportsResetState="false" SupportsRangesize="false"
SupportsFindMode="false" SupportsUpdates="false" Definition="MyDataControl"
BeanClass="MyDataControl" xmlns="http://xmlns.oracle.com/adfm/datacontrol">
<Source>
<definition xmlns="http://xmlns.oracle.com/adfm/adapter/webservice" name="MyDataControl" version="1.0"
provider="oracle.adfinternal.model.adapter.webservice.provider.soap.SOAPProvider"
wsdl="my_wsdl_location">
<service name="MyService" namespace="urn:eu.emsa.ssn" connection="MyDataControl">
<port name="MyServicePort">
<operation name="initiateMyService">
<dataformat format="XML"/>
</operation>
</port>
</service>
</definition>
</Source>
</AdapterDataControl>and MyDataControl.xml:
<?xml version="1.0" encoding="UTF-8" ?>
<JavaBean xmlns="http://xmlns.oracle.com/adfm/beanmodel" version="10.1.3.41.57" id="MyDataControl"
BeanClass="MyDataControl" isJavaBased="false">
<MethodAccessor id="initiateMyService">
<ParameterInfo id="ReplyTo_Address" Type="java.lang.String" isStructured="false"/>
<ParameterInfo id="ReplyTo_PortType" Type="java.lang.String" isStructured="false"/>
<ParameterInfo id="ReplyTo_ServiceName_PortName" Type="java.lang.Object" isStructured="false"/>
<ParameterInfo id="ReplyTo_ServiceName" Type="java.lang.String" isStructured="false"/>
<ParameterInfo id="MessageID" Type="java.lang.String" isStructured="false"/>
<ParameterInfo id="payload" Type="java.lang.String" isStructured="false"/>
</MethodAccessor>
</JavaBean>A couple of days ago I've created a Data Control for another BPEL process the same way and everything was OK.
Any ideas why this is not working?
Regards!
BB
Message was edited by:
BrokenboneFound out the reason. The problem was in ...MyApp\.adf\META-INF\connections.xml file which had write protection.
BB -
Some of the Master Data Attributes DataSources not visible in RSA5
Hi Experts,
After installation of R/3 ECC 5, some of the master data attributes datasources are not visible in RSA5.
Do i need to do any other settings to get them.
Awaiting response....
Thanks in advance.....
RafiHi Prakash,
Thanks for quick response. I have checked those tables. i found that i have same datasources as it is in RSA5.
For example: i have 0SALE_DIST_TEXT in both RSA5 and ROOSOURCE, how i can have the attributes for the same.
also i don't have attributes datasource for Customer Group1...5, Material Group1...5, sales office etc.,
Anticipating your response,
Thanks
Rafi -
Message mapping (data flow editor, data dependcies buttons not visible)
Hi,
In my SAP PI...IR ...in message mapping screen some buttons are not enable/visible like
data flow editor, data dependcies,clear mapping buttons not visible)
any oss notes/help will be appreciated.
ThanksHi,
This will help you
/people/shabarish.vijayakumar/blog/2006/02/13/unable-to-open-iresrid-xipipi-71-updated-for-pi-71-support
Go for 1.4.X version than 1.6.X The Problem will be resolved
Regards
Sangeetha -
HT1688 iPhone 5S, Settings Cellular Use Cellular Data For Apps - Not Updating
I have iPhone 5S iOS 7.0.4 with AT&T Contractual Plan.
When I change any settings in Settings > Cellular > Use Cellular Data For to disable or enable apps to use cellular data. And, if I exit and enter again it shows the old settings.
Also Call Time > Current Period is not updating.
This is happening for last one week. I have also noticed heavy cellular data usage for last one week.
I have reset the phone as a new phone this it is solved, but if I restore from my backup, then the problem is returning again. Even I have deleted some apps, but it doesnot help.
Please help me to solve this.Call AT&T - it seems they are forcing their own settings on you.
-
List of data targets is not visible during data upload
Hi all,
I am trying to load user defined transactional data into an info object, i will do all necessary customization steps such as creating application component,assiging data sources,creating info packages and then creating update rules in info cubes, moreover i wrote a routine which calculates sales reveune based on cost and quantity sold.
My problem is that when i created infopackage , it does not list any data targets, Plz any one can give tips in this regard.
thanks in advance
regards,
a.fahrudeen
Message was edited by:
FAHRUDEEN MUSTAFAHi Fahrudeen,
Am a little confused here... you say you want to load Transaction data and load it into the InfoObject?? what was that??
You can load the Transaction data only into your data targets such as InfoCube and DataStore Objects... If you are loading the data into your InfoObjects, then that would mean that you are loading the Master data for which obviously you won't have your data targets listed in your InfoPackage... Only in case of loading the transaction data would you have your Data Targets listed in your InfoPackage...
Regards
Manick -
Images stored in Application Data folder are not visible in HTML Page generated by AIR Application
Hi Programmers,
I have an AIR application where in I am capturing the images of persons via web cam and storing them in the Application Data folder of the users machine. I am successfully able to do so.
However, when generating the report in the HTML format from within the AIR application, I use the image captured and give the absolute path. but some how the image doesnt appear in the browser, I get the icon for image not found.
When I right click on the image, select property and copy the image path in new browser, I can see that image. Any thoughts on why this is happening?
Thanks,
Hitesh patelI tried changing the directory as following in java class:
File trgDir = new File("/tmp/myTarget/");
File srcDir = new File("/tmp/mySource/");
FileUtils.copyDirectory(srcDir, trgDir);
but unfortunately Adf mobile application does not support "File Utils. copy Directory" library
so is there any way to circumvent this problem.
Any help would be appreciated
Maybe you are looking for
-
Help pls - unable to open library book
I was having no problem till yesterday and all of a sudden library book won't open on my Andrioid tablet. I tried to unistall and reinstall the Overdrive, reauthorized and all but I still keep getting the err message with an error code of 1069. Any i
-
The ability of the new 2014 Mac Pro to run older legacy OSX versions?
Being a video editor, I will probably be in the market to buy the new Mac Pro when it's released into the marketplace (which should be very soon). So my question is...I usually retain several different startup drives, with different versions of OSX
-
Request: OS X 10.4 Tiger for Intel Macbook 2.2 Mhz
Hi All, I recently bought a macbook 2.2 mhz intel machine from the apple store, which shipped with leopard. Since I use it with some software which does not work on 10.5 yet, I need to downgrade my Mac to Tiger. The only problem is that I need to do
-
I have purchased an app from the app store and cannot seem to download it, the download statrs and then rapidly cuts out, it will not complete and seems to repeatedly go over the same few Mb. I have previously downloaded large files and not had a pr
-
We are running ECC 5.0, and I am trying to configure ArchiveLink so we can use it to store scanned accounting documents on a third-party server, and link the scanned documents to SAP FI documentsI. Can anyone provide the config steps required for thi