Data for Month of April 2009 suddenly has disappeared in iCal!

When I click on April 2009(one of my busiest month`s this year)in iCal ALL the entries under all my Calendars-Events/Work/Birthdays/etc. have disappeared.
Every other Month is fine except April-where have all my Entries gone?
I can`t retrieve this month`s data from MobileMe because at some point Sync has replaced the MobileMe iCal April with the same empty month off my computer!!

If you look a bit lower, i have the same darn problem. It only happened once i started using mobileme to sync, too.
It's odd, my ical will do a few things- sometimes it will flash the calendar like it's fine and then turn blank. Other times, it only shows two of my various different calendar groups. I don't get it, and it's ticking me off, too! I also heavily rely on my ical...

Similar Messages

At F.5e,wrongly given 30.4.2008 for the month of April 2009

Hi,
Seniors
User while doing F.5e(post balance sheet adjustment) for the month of April 2009 , he wrongly entered Posting date 30.4.2008 and executed ,
now what i have to do plz guide me.
Thanks in adv

Hi ,
Kedar thanks for ur reply,
Actually client following process is,
First they run F.5D, after F.5E here system giving message is batch created(SAPF180..), then key user will run that batch at SM35.
but this time while they are excuting the batch, for one document system asking b.area as required,
we confused which b.area we have to enter, because client has 4 b.areas.
i tried with that document amount,that is belongs to which b.area, but there is no entry with that amount.
and client asking suppose if we enter any b.area, later can we change b.area field and is there any possible to pass jv later.
please
Thanks in advance

Need to get data for month entered in user prompt to prior 12months.

Hi,
I have a report where i need to display total amount for current month to prior 12 months data...first column will be current month, second column is (current month-1),3rd col: (current month-2)....( current month-12).
Is there any way I could use current date to get previous 12 months in variables?
For example: if current date is 02/15/2010, I need get data for 01/2010, 12/2009, 11/2009,....01/2009.
For example: if I entered Month: 03 and year:2010 in prompt , then I need to get data for prior 12 months to that in the prompt for month:03?.

The only way to do this is using restrictions on Universe... here you can have the restrictions for every month or a range using the user prompt and the system date.
Regards

LOve Firefox but it's annoying that if I'm using a search engine (I use lots of subscription legal search databases), when I press the back button all the data I entered in the search boxes has disappeared. I'm sure Firefox didn't use to do that?

Love Firefox but it's annoying that if I'm using a search engine (I use lots of subscription legal search databases), when I press the back button all the data I entered in the search boxes has disappeared. I'm sure Firefox didn't use to do that?

Please do the following. 
#Click the Firefox button, go to '''Options '''| '''Options''' | '''Privacy'''. 
#In the dropdown menu at the top, change it to "'''Use custom settings for history'''" 
#Checkmark the option: "'''Remember Search and Form history'''". 
#Remove the checkmark from: "'''Clear history when Firefox closes'''".

For some reason osx mountain lion has disappeared from my purchases and now when i want to install mountain lion on another mac with the same apple id it wants to charge me for the program even though i have already purchased it. what do i do?

for some reason osx mountain lion has disappeared from my purchases and now when i want to install mountain lion on another mac with the same apple id it wants to charge me for the program even though i have already purchased it. what do i do?

Open the Mac App Store on the other Mac and in the Quick Links sign into your account. See if the Mountain Lion purchase is among hidden apps in the iCloud area of your account info.

ITunes giving the same date for everything "05/01/2009"

Hey guys just got my first mac yesterday (after years of PC) and I'm working on getting my podcasts/music into iTunes however it seems like iTunes on my new mac has an affinity to the date 05/01/2009. I checked the clock in the upper right of my screen and see that my computer knows the correct date however in iTunes it shows the other date for when I Last Played songs (even if it was 30 seconds ago) and in my podcasts it tells me every episode from every podcast came available on that date as well.
Anyone know how to fix this? Thanks!

Sorry to bump but it's kind of annoying.
Even a new podcast I downloaded yesterday (new episode came out yesterday) has the 05/01/2009 date.

Date for Month year only?

I Have a report being done where, the user wants to see the 'slow moving inventory' for a 2 month period.
It's not automatic, the past 2 months. they can select which 2 months they want. So, I was thinking of the best way for the parameters.
Maybe just have them enter one? month/year. but in any case if i do a from and to, I dont' need the entire calender- is there a way to display just the month and year? if not i can create the parameter that way.

I would create a command (SQL Select statement) to use for data for a dynamic prompt. It might look something like this in Oracle (allows for two full calendar years in the past):
Select distinct
To_Char(OrderDate, 'MMM-YYYY') as MonthYear
from Orders
where EXTRACT(Year from OrderDate) >= (EXTRACT(Year from Sysdate) - 2)
Or like this in SQL Server:
Select distinct
Left(DateName(month, OrderDate), 3) + '-' + DateName(year, OrderDate) as MonthYear
from Orders
where Year(OrderDate) >= (Year(GetDate()) - 2)
DO NOT link the command to anything in the report - its sole purpose is to provide data for a dynamic prompt. Crystal will complain that this is generally not supported, but it will work in this situation.
Now create a dynamic parameter that will use this data - DO NOT use any other data from your report tables! This parameter will identify the start month for the report.
Lastly, you'll need to create a two formulas - one that will calculate the start date from the parameter value and another that will create the end date. If the parameter is called {?StartMonth}, they might look like this:
{@StartDate}
StringVar monthName := UpperCase(Left({?StartMonth}, 3));
//get the month number
NumberVar mn := Switch (
monthName = 'JAN', 1,
monthName = 'FEB', 2,
monthName = 'DEC', 12);
//get the Year number
NumberVar yr := ToNumber(Right({?StartMonth}, 4));
//return the first day of the start month:
Date(yr, mn, 1)
{@EndDate}
//Subtract one day from the start of the month 2 months after the start date to get the end of the
//month after the start date
DateAdd('m', 2, {@StartDate}) - 1
Use these formulas in your selection criteria for your report.
-Dell

I have just installed Lion and the text window for the web address in safari has disappeared. Anyone know how to get it back?

I have just installed Lion and the text window for web addresses in safari has disappeared. Any ides how to getit back?

Select Customize Toolbar from the View menu, select the item and drag into the toolbar. Place where you want it to be.

TS1702 my app for settings on my iphone 4s has disappeared?

how do I reinstall the app Settings on my iPhone?

You can't delete it. If you don't see it on another screen or in a folder, swipe to the right or press the home button to get to the search screen and search for settings. Then open it and go to general, scroll down to reset, and tap reset home screen layout.

The icon for NoScript 2.1.1.2 has disappeared and although "Enable JavaScript" is checked in Tools Options Content some sites will not display but give me a message that JavaScripts are not enabled.

Unable to enable JavaScript

To avoid confusion: http://kb.mozillazine.org/JavaScript_is_not_Java
See [[JavaScript]] and http://kb.mozillazine.org/JavaScript
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Games I have been playing for months suddenly told me to update my Flash Player, but . . .

A few days ago, games I have been successfully playing for months on Club Pogo suddenly tells me my Flash Player needs to be updated to the most current version. But upon clicking the link and being brought to the Install Abobe Flash Player page, it tells me I already have the most current version for my operating system installed.
I've tired uninstalling and reinstalling it and I've checked for software updates for both Safari and Flash Player, but nothing seems to be working.
I am quite frustrated and I have no idea what to do next. Any help would be greatly appreciated.

Nothing you can do; your OS version does not support any newer Flash Player versions.

How to only show data for a certain period of time for cumulative data?

I need to show cumulative data for the past 12 months on a chart (e.g. # of accounts). But in order to get the cumulative data for Month 1, I need to cum the data starting from the very first month when we started to add new account which can be Jan 2006. If I put a filter to limit the data to only last 12 months, then my Month 1's cum data will not include any account prior to Month 1. So how do I do this?
Edited by: user637947 on Feb 5, 2009 2:02 PM

Hi,
Try this Filter....
Opportunity."Close Date" >= TIMESTAMPADD(SQL_TSI_MONTH, -11, TIMESTAMPADD(SQL_TSI_DAY, -(DAY(CURRENT_DATE) - 1), CURRENT_DATE)) AND Opportunity."Close Date" <= TIMESTAMPADD(SQL_TSI_MONTH, 1, TIMESTAMPADD(SQL_TSI_DAY, -(DAY(CURRENT_DATE) + 0), CURRENT_DATE))
Thanks and Regards,
Amit Koul

Calander Date format(month year)

Hi All,
I am using the Date format (month year, 'January 2009') to QaaWs as a input. But when i go into Xcelsius calendar i am trying to give the same format but its not taking as same as mentioned above( I customize the cell in xcelsius spread sheet as month year). Is there any thing to change?
Please help me.
Thanks in advance.
Muvva

The month in words datatype is FCLTX.
If you have the date field, you can convert to your required format.
data : out_date(20) type c.
DATA : ws_fcmnr TYPE fcmnr,
ws_month TYPE fcltx.
parameter date like sy-datum.
ws_fcmnr = date+4(2).
SELECT SINGLE ltx
INTO ws_month
FROM t247
WHERE mnr = ws_fcmnr
and spras = 'EN'.
concatenate ws_month date6(2) date0(4) into out_date separated by space.
write out_date.
Thanks,
Susmitha
Dont forget to reward points for useful answers.

FSL-02003 Unable to set owner /sapmnt/MHS/global/security/data for 512.

Hello,
I got the error "FSL-02003 Unable to set owner /sapmnt/MHS/global/security/data for 512" while installing SM 7.0 EhP 1 on Linux at phase "Create Secure Store". I have tried changing owner of the folder, but no change.
Can anybody help?
Thanks for your help
Kris
WARNING[E] 2009-07-24 17:54:48.617
           CJSlibModule::writeError_impl()
FSL-02003 Unable to set owner /sapmnt/MHS/global/security/data for 512.
TRACE      2009-07-24 17:54:48.618 [iaxxejsbas.hpp:483]
           EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
TRACE      2009-07-24 17:54:48.699 [syuxctask.cpp:1382]
           CSyTaskImpl::start(bool)
A child process has been started. Pid = 18576
TRACE      2009-07-24 17:54:48.784 [syuxctask.cpp:1382]
           CSyTaskImpl::start(bool)
A child process has been started. Pid = 18577
ERROR      2009-07-24 17:54:48.822 [sixxcstepexecute.cpp:950]
FCO-00011 The step createSecureStore with step key |NW_Doublestack_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_SecureStore|ind|ind|ind|ind|8|0|createSecureStore was executed with status ERROR .

Hi Kris,
Have you tried to change permission of the file as logs are showing ?
Check SAP Note 1257481 - SAP NetWeaver Inst. Based on Kernel 7.11: IBM DB2 for i which is not for your OS but similar error is described in that which is telling that by changing the permission you can proceed.
Thanks
Sunny

Flash player worked for months but now I have audio but no video / Windows 8 / Help

Flash player worked for months. But today suddenly the video part stopped working. So I have audio and a blank screen. This is across all applications: youtube, live streaming, etc.

To help troubleshoot we'll need the following system information:
Operating system
Browser
Flash Player version - http://adobe.ly/wNzNAu
Web Page URL
Steps to reproduce
When reporting issues with video or audio, it's also helpful to get your system hardware and driver details. Instructions for finding this information can be found here:
Windows - http://adobe.ly/KShBWi
Mac - http://adobe.ly/16Odlzb
Finally, sometimes video and audio problems are caused at a lower level and not directly related to Flash Player. I recommend trying both of the links below to see how they perform. If the problem exists with both, then Flash Player is most likely not the culprit as the HTML5 video link does not use Flash Player when playing. You can verify the use of HTML5 by right clicking the HTML5 video and looking for the words "About HTML5" at the bottom of the context menu.
HTML5 video - http://bit.ly/ahzL63
Non-HTML5 video - http://bit.ly/cqNb3w

Data for Month of April 2009 suddenly has disappeared in iCal!

Similar Messages

Maybe you are looking for