Data from different systems in one report in Visual Composer

Hi,
I want to create a dashboard report in visual composer where in I have a set of 10 tables data to be displayed in one page out of 10 queries I am getting the data for 5 of the reports from Bi system and for other reports we get it from CRM system .Can I place data coming from 2 different reports in one view.If so how is that possible.
What are the advantages we have in Visual composer apart from WAD .
Regards,
Maya

Hi,
Two different reports can be placed in one iview, but as far as i know it is not possible to combine two reports data into single table.
regards,
Pruthvi R

Similar Messages

  • How to fetch data from different sources into one source (like into Ztable)

    hi friends,
    As per our client requirements they want to develope an Inventory and an Ontime delivery report in BO on top of Oracle database.
    Situation is some thing like they have ECC 6.0.and they want to collect all inventory and ontime delivery data at one place.According to me that could be one Ztable in which we can gather all data.Apart from that they are going to use Data Integrator in which they can directly fetch the data from R/3 system(They dont want to have BI system) and put all data in Oracle DB.On top of ORacle BO person can develop BO reports.
    My question is how to fetch all data at one place and what are the tables going to be use.
    kindly help me out as its very important project.
    Thanks
    Abhishek

    The following is my standard reply to those who need to get old data from a backup in one account and add it to another account.  The method described here may be applied to your case.  It would be a bit of a long process, though.
    When connected to the account you want to GET data from, Go to Settings>iCloud and turn all data that is syncing with iCloud (contacts, calendars, etc.) to Off. 
    When prompted choose to keep the data on the iPhone. 
    After everything is turned off, scroll to the bottom and tap Delete Account.  Next, set up a new iCloud account using a different Apple ID and turn iCloud data syncing for contacts, etc. back to On.  When prompted, choose Merge.  This will upload the data to this new account.
    Note that this only affects the "Apple data" like contacts, calendars, reminders, etc.  Many third party apps also use iCloud to store data files there.  These files may be lost in the process, unless the apps also keep the data locally on the device.
    NOTE:  Photos in the photo stream (if you use it) will not transfer to the new account.  It is advised that you save the photos to a computer before performing the account switch. 

  • How to display multiple data from different table in one table? please help

    Hi
    I got sun java studio creator 2(the separate installation not the one in the net beans)....
    My question is about displaying data that have been taken from the database.... I know how to display data in a table(just click on the table "bind data" )... but my question is that:
    when i want to use a sql statement that taken the data from different table...
    how can i display that data in the table(that will be shown in the web) ??? when i click bind data on the table i can only select one table i can't select more than one....
    Note:
    1) i'm using the rowset for displaying the data in the table, since the sql statement is depending on a condition(i.e. select a from b where c= ? )...
    2) i mean by different table is that( i.e. select a from table1,table2 )..
    thanks in advance...

    Hi,
    937440 wrote:
    Hi every one, this is my first post in this portal. Welcome to the forum!
    Be sure to read the forum FAQ {message:id=9360002}
    I want display the details of emp table.. for that I am using this SQL statement.
    select * from emp where mgr=nvl(:mgr,mgr);
    when I give the input as 7698 it is displaying the corresponding records... and also when I won't give any input then it is displaying all the records except the mgr with null values.
    1)I want to display all the records when I won't give any input including nulls
    2)I want to display all the records who's mgr is null
    Is there any way to incorporate to include all these in a single query..It's a little unclear what you're asking.
    The following query always includes rows where mgr is NULL, and when the bind variable :mgr is NULL, it displays all rows:
    SELECT  *
    FROM     emp
    WHERE     LNNVL (mgr != :mgr)
    ;That is, when :mgr = 7698, it displays 6 rows, and when :mgr is NULL it displays 14 rows (assuming you're using the Oracle-supplied scott.emp table).
    The following query includes rows where mgr is NULL only when the bind variable :mgr is NULL, in which case it displays all rows:
    SELECT     *
    FROM     emp
    WHERE     :mgr     = mgr
    OR       :mgr       IS NULL
    ;When :mgr = 7698, this displays 5 rows, and when :mgr is NULL it displays 14 rows.
    The following query includes rows where mgr is NULL only when the bind variab;e :mgr is NULL, in which case it displays only the rows where mgr is NULL. That is, it treats NULL as a value:
    SELECT     *
    FROM     emp
    WHERE     DECODE ( mgr
                , :mgr, 'OK'
                )     = 'OK'
    ;When :mgr = 7698, this displays 5 rows, and when :mgr is NULL, it displays 1 row.

  • How to make this function module as RFC to get data from different system?

    Hi
    I am trying to use following function module . This function module is used to copy data from one cube to another cube within same system however I need a this should happen across two different system. How can I use this function module to make it remote call to different system and do the same function what it is doing ?
    Name of function module -
    RSDRT_INFOCUBE_DATA_COPY
    Any help would be really helpful
    AG

    HI,
      let us say you want to copy the data of a cube in system A to a cube in system B .
      1) create a RFC function module in system B (in this function module  call the function module RSDRI_CUBE_WRITE_PACKAGE to update the data), this RFC function module should have same parametersa as RSDRI_CUBE_WRITE_PACKAGE .
    2) write a program in system A .. read the data from the infocube using the function module RSDRI_INFOPROV_READ and call the RFC function module in system B that you have created..
    for the details of the parameters to pass to these two function modules use the RSDRT_INFOCUBE_DATA_COPY and get the required code
    Thanks
    mahesh

  • BLOBs from different tables on one report

    Hi,
    I think the declarative BLOB support enhancement in 3.1 is really great. I am running into a problem with a report that joins two tables that both have BLOB columns. I have a Letters table and a Response table. The Response table has a FK linkage to the Letters table with the Letters table being the referenced table. I have a report that joins the Letters & Response tables and provides download links for the BLOBs in both tables. However on the report, only one of the link works at a given point in time. Both the links work fine in isolation (if the other link is commented out in the query).
    I am using the APEX_UTIL.GET_BLOB_FILE_SRC function to download the files. Has anyone tried using this function to download files from two different tables in a single report?
    TIA,
    Ramesh

    Ramesh,
    Is this application on apex.oracle.com by any chance? I just went to test there and am having all sorts of trouble with declarative display of BLOBs in a report but on our dev box, two works fine (except that the link for both is the default rather than what I selected).
    -- Sharon

  • Data from different databases in the same report.

    Hi Everyone,
    I am trying to build a reconciliation report in which I need to show the data from the source and target, side by side.
    Source and target are both different databases, although being oracle only
    Whenever a new data model is created, it gets attached to a data source and in the report we need to choose a specific data model.
    Can we have data from different databases in the same report ?

    Yes, it is possible.
    One way Is to use dataTemplates. There you can make queries from any number of different databases (The max I have done is 5).
    It looks something like that:
    <dataTemplate name="NameOfTemplate">
    <dataQuery>
         <sqlStatement name="Q1" dataSourceRef="Connection1">
              <![CDATA[     select * from table1]]>
         </sqlStatement>
         <sqlStatement name="Q2" dataSourceRef="Connection2">
              <![CDATA[     select * from table2]]>
         </sqlStatement>
      </dataQuery>
      <dataStructure>
         <group name="RESULT1" source="Q1">
              <element name="P_FIRST_NAME" value="P_FIRST_NAME"/>
         </group>
         <group name="RESULT2" source="Q2">
              <element name="P_DATE" value="P_DATE"/>     
         </group>
      </dataStructure>
    </dataTemplate>dataStructure is very important when you get data from different places, if you don't define those elements, then only the result from Q1 is shown.
    The second possible way is to make as two different data models, each containing their own query and then set Main Data Set as concatenated SQL Data Source.
    Best of luck,
    Evelyn

  • Getting Customer data from Different R3 system to CRM

    Hi Gurus,
    I need to get Customer data from different R3 systems to CRM. But the problem is, the customer datas in these R3 systems have the same BP number, and the SD datas were defined same  in these R3 systems. Thus, when ı try to fetch these SD datas to CRM, it overwrites the existing datas.
    I have read different scenarios to solve this;
    1.  About Using Mapping.
    2.  About Working on different Clients.
    Do you have any solution or suggestion? Need your Help...
    Best Regards...

    Hi,
    The multplie backend scneario is supproted but wth restrictions and on a project basis. Unfortunealtey there's no simple document we can refer you to for this. You would need to involved SAP conuslting- please refer to note 1084315.
    Best regards,
    Brian.

  • Running queries coming from different systems

    Hello All
    I have a scenario,
    We are using BI version 7.0,
    The requirement is to  run queries in BEX analyzer coming from 2 different SaPBW systems.
    For example :
    We have two  BW systems A and B,
    In the First tab  we have query running based on the BW system A and in the second tab query running on Bw system B.
    When we try to run the second query in the second tab the first query vanishes,
    Can anybody help me, is it possible to run the 2 different queries from different systems???
    Regards,
    Ravi

    Hi Ravi,
    Even using RRI you will not be able to combine reports from different systems in single workbook. RRI is generally used for Summery to detail level reporting. In such scenarios from first report you click on particular characteristic and other details related to this characteristics are shown in different report coming from any other source.
    If you want this kind of report to run then either you will have to build a Virtual provider in one of the BI system making source as another system and then create a query and use it in same workbook.
    In this way your report might take some time to execute but you don't need to load all your data from one system to other.
    Regards,
    Durgesh.

  • Missing Data from Legacy System

    Hello All,
    My client went live end of January this year. They had a month of transaction data in their legacy system which they did not bring into SAP. Since this is their first year on SAP and recently implemented Extended Withhold Tax one month data is missing; when they run the 1099s at the end of the year they are going to be reported incorrectly.
    How can we bring over that missing data from legacy system over to SAP without having to clear those invoices in SAP?
    Thank You In Advance

    Hi Shashi,
       Have a look : <a href="http://www.box.net/shared/9tda040za6">Transferring Data with DB Connect</a>
    <a href="http://sapbwneelam.blogspot.com">More Docs...</a>
    Hope it Helps
    Srini

  • How to insert  data from different internal  table  into a data base table

    hi all,
             I want to insert a particular field in an internal table to a field in a data base table.Note that the fields in the internal table and database table are not of the same name since i need to insert data from different internal tables.can some one tell me how to do this?
    in short i want to do something like the foll:
    INSERT  INTO ZMIS_CODES-CODE VALUE '1'.
    *INSERT INTO ZMIS_CODES-COL1 VALUE DATA_MTD-AUFNR .(zmis_codes is the db table and data_mtd is the int.table)

    REPORT  ZINSERT.
    tables kna1.
    data: itab LIKE KNA1.
    data lv_kUNAG LIKE KNA1-KUNNR.
    lv_kuNAG =  '0000010223'.
    ITAB-kuNNR = lv_kuNAG.
    ITAB-name1 = 'XYZ'.
    INSERT INTO KNA1 VALUES ITAB.
    IF SY-SUBRC = 0.
    WRITE:/ 'SUCCESS'.
    ELSE.
    WRITE:/ 'FAILED'.
    ENDIF.
    Here lv_kunag is ref to kna1 kunnr passed in different name
    In internal table .
    Try and let me know if this logic dint work.

  • Single query to get data from different databases

    i need to capture certain fields from certain tables in database 1 and certain fields from certain tables in database 2 into one file using a single SQL statement.
    i tried searching on the net
    i found that dblinks can help
    but iam not sure if ill be able to create dblinks in my situation which is:
    i need to get data from oracle to be copied to mysql
    this is not a replication acitivity, but i need certain fields from one database and certain from the other
    so what iwas thinking is, if i use an sql query to get all the fields (i need around 40) from the different oracle databases and create a singlefile with one insert per select, i can then read that file into mysql
    instead of creating multiple sql queries for each table and creating separate files and eventually separate tables in mysql.
    can anyone help me here?
    or maybe suggest another approach.
    thanks

    Hi,
    I think dblink is the only option available to get data from different databases. It will work for your case too.
    CREATE DATABASE LINK db_link CONNECT TO user_name IDENTIFIED BY  password USING 'instance_name'you must have the system privilege 'create database link' to create db links. This way you can get the required data and put it in a table in oracle. But i dont know how to put this data from oracle table to Mysql.
    HTH
    Muneer

  • What are ways to transfer data from online system to SAP

    Hi all,
    We have a requirement to transfer data from an online system (Non SAP) to SAP.
    What are all the possible ways to  do that and which one is preferred?
    Thanks!
    Rahul.

    Dear
    for transferring data from online system to SAP there are different ways follow this links
    http://searchsap.techtarget.com/answer/Using-IDocs-to-connect-a-non-SAP-system-to-an-SAP-R-3-system-online
    https://help.sap.com/saphelp_nw70ehp1/helpdata/en/c7/eff2280d0511d3a6300060087832f8/content.htm
    Regards

  • Why do we get the data from a view to a report.

    hi
    why do we get the data from a view to a report. is it possible to get the data from a view in all the cases?

    hi Jyotssna,
      Suppose you are planning to get the data from multiple tables then you got to specify seveal condtions and make use of joins which results in poor performance in fetching the data . In order to improve the performance we make use of views where the conditions of different tables are defined and the data is fetched accordingly.
    Regards,
    Santosh

  • InfoCube Modelling-Adding data from different ODS's on to the Infocube

    Hi Experts,
    I am new to SAP BI. I have a basic doubt on Modelling the InfoCube.
    In our requirement, I have to populate data from 9 custom SAP Tables on to 9 ODS's. And, then take these data on to Infocubes.
    And, they want to reduce the number of cubes as much as possible. So, I have to combine the data from different ODS's and build 2-3 Infocubes.
    For Example.
    I am going to combine 5 ODS's data on to 1 CUBE based on Delivery number...
    there are 5 ODS with common key Delivery number. And, suppose I have added some set of fields from ODS1.
    And, now when I add other set of fields from the second ODS, WHAT WILL HAPPEN TO THE 'Delivery Number' field ??
    I will make it clear.
    I have a record in CUBE already containing Fields- : Delivery no, field_a,  field_b, field_c, field_d. Where the 'Delivery no =112333'. This record comes from ODS1.
    Now, I want to add data data from ODS2, containg fields -: Delivery no, field_e, field_f, field_g, field_h.
    And, what happens to the already existing record in CUBE with 'Delivery no = 11233'. ?
    Will the value in this info-object get overwritten ?
    OR.. will it combine the data from both the ODS's and show it as ONE record ???
    Please advice ... How will I solve this scenario ?
    Thanking You in Advance
    Shyne Sasimohanan

    Answer for your question and the suggestion.
    the data will look like as given below
    Delivery no, field_a, field_b, field_c, field_d, field_e, field_f, field_g, field_h
    11233           1           1           1          1            0           0            0            0
    11233          0           0          0             0           1           1           1          1 
    but the best way, according the design standards is creating another DSO on the top of all the DSO's and combine all the data in that DSO and send the data to Infocube. then the data will be shown as below.
    Delivery no, field_a, field_b, field_c, field_d, field_e, field_f, field_g, field_h
    11233           1           1           1          1            1           1           1          1 
    Regards,
    Siva A

  • *Journal Entries while uploading the vendor master data from legacy system*

    hi SAP Folks,
    can any one of you tell me the journal entries while uploading the vendor master data from legacy system to SAP system.
    Eg: legacy system is having 10000 vendors list, 1 reconciliation account and $ 1000000. while uploading all these data from legacy system to SAP what are the journal entries we get.
    thanks in advance.
    Edited by: ravindranath manikonda on Nov 24, 2008 1:12 PM

    Hi
    you will be having  only one entry logically
    i.e. Opening Bal. clrng A/c Dr.
           To Vendor A/c Cr.
    regards

Maybe you are looking for