Data from KONP.

hallo everyone,
my requirement is to get MWSK1 from KONP table.
so i coded as below.
SELECT * FROM konp WHERE knumv = vbak-knumv and kposn = vbap-posnr.
konp-mwsk1 = wa-mwsk1.
It is showing error: Unknown column name "KNUMV" until runtime, you cannot specify a field list.
if iremove the condition i am getting always the same tax code(MWSK1).
please suggest me the corrections.
Thanks & regards,
narsireddy.

Hi naveen,
now i have changed my code as.
SELECT * FROM konp INTO wa WHERE knumh = vbak-knumv and kopos = vbap-posnr.
konp-mwsk1 = wa-mwsk1. (i have attached konp to screen)
ENDSELECT.
SELECT * FROM konp WHERE knumh = vbak-knumv and kopos = vbap-posnr.
konp-mwsk1 = konp-mwsk1.
ENDSELECT.
i tried both and now i am getting empty field. Can you help me with the condition part ?
thanks & regards,
NarsiReddy.

Similar Messages

Generic datasource by function module to fetch data from multiple tables?

I'm writing a function module to fetch price, for generic datasource.
At first, extract test is OK. But InfoPackage never stop when loading data to PSA in BW.
And I find the example codes:
 OPEN CURSOR WITH HOLD S_CURSOR FOR
 SELECT (S_S_IF-T_FIELDS) FROM SFLIGHT
 WHERE CARRID IN L_R_CARRID AND
 CONNID IN L_R_CONNID.
 ENDIF. "First data package ?
* Fetch records into interface table.
* named E_T_'Name of extract structure'.
 FETCH NEXT CURSOR S_CURSOR
 APPENDING CORRESPONDING FIELDS
 OF TABLE E_T_DATA
 PACKAGE SIZE S_S_IF-MAXSIZE.
 IF SY-SUBRC <> 0.
 CLOSE CURSOR S_CURSOR.
 RAISE NO_MORE_DATA.
 ENDIF.
 S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF.
There using Cursor to fetch data package by package, and raise exception NO_MORE_DATA to stop the loading process.
Now I fetch data from multiple tables, I don't think I can use Cursor.
Then How can I handle this?
Thanks a lot.

Thanks
IF IT_999[] IS INITIAL.
 SELECT A~KNUMH A~MATNR A~KSCHL VKORG VTWEG A~DATBI A~DATAB KBETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
 TABLE TP_DATA
 FROM A999 AS A
 INNER JOIN KONP AS B
 ON A~KNUMH = B~KNUMH
 INNER JOIN MARA AS C
 ON A~MATNR = C~MATNR
* FOR ALL ENTRIES IN IT_999
 WHERE
* A~KNUMH = IT_999-KNUMH AND
 ( ( A~KSCHL = 'ZPRC' AND VKORG = 'Z000' AND VTWEG = 'Z1' ) OR
 ( A~KSCHL = 'ZPRD' AND VKORG = 'A000' AND VTWEG = 'Y3' ) ) AND
* A~DATBI >= SY-DATUM AND
 LOEVM_KO = ''.
 SELECT A~KNUMH A~MATNR A~KSCHL VKORG VTWEG A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
 TABLE TP_DATA
 FROM A999 AS A
 INNER JOIN KONP AS B
 ON A~KNUMH = B~KNUMH
 INNER JOIN MARA AS C
 ON A~MATNR = C~MATNR
* FOR ALL ENTRIES IN IT_999
 WHERE
* A~KNUMH = IT_999-KNUMH AND
 A~KSCHL = 'ZPR3' AND A~VKORG = 'I000' AND
* DATBI >= SY-DATUM AND
 LOEVM_KO = ''.
ENDIF.
IF IT_997[] IS INITIAL.
 SELECT A~KNUMH A~MATNR A~KSCHL VTWEG A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
 TABLE TP_DATA
 FROM A997 AS A
 INNER JOIN KONP AS B
 ON A~KNUMH = B~KNUMH
 INNER JOIN MARA AS C
 ON A~MATNR = C~MATNR
* FOR ALL ENTRIES IN IT_997
 WHERE
* A~KNUMH = IT_997-KNUMH AND
 A~KSCHL = 'ZPRA' AND VTWEG = 'Y1' AND
* DATBI >= SY-DATUM AND
 LOEVM_KO = ''.
ENDIF.
IF IT_996[] IS INITIAL.
 SELECT A~KNUMH A~MATNR A~KSCHL A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
 TABLE TP_DATA
 FROM A996 AS A
 INNER JOIN KONP AS B
 ON A~KNUMH = B~KNUMH
 INNER JOIN MARA AS C
 ON A~MATNR = C~MATNR
* FOR ALL ENTRIES IN IT_996
 WHERE
* A~KNUMH = IT_996-KNUMH AND
 A~KSCHL = 'ZPRB' AND
* DATBI >= SY-DATUM AND
 LOEVM_KO = ''.
ENDIF.
SELECT MATNR "u7269u6599u53F7u7801
 MEINH "u4ED3u50A8u5355u4F4Du7684u5907u7528u8BA1u91CFu5355u4F4D
 UMREZ "u57FAu672Cu8BA1u91CFu5355u4F4Du8F6Cu6362u5206u5B50
 UMREN "u8F6Cu6362u4E3Au57FAu672Cu8BA1u91CFu5355u4F4Du7684u5206u6BCD
 FROM MARM
 INTO CORRESPONDING FIELDS OF TABLE IT_MARM
 FOR ALL ENTRIES IN TP_DATA
 WHERE MATNR = TP_DATA-MATNR AND MEINH = TP_DATA-KMEIN.
LOOP AT TP_DATA.
 IF TP_DATA-KPEIN NE 0.
 TP_DATA-KBETR = TP_DATA-KBETR / TP_DATA-KPEIN.
 TP_DATA-KHETR = TP_DATA-KHETR / TP_DATA-KPEIN.
 ENDIF.
 IF TP_DATA-KSCHL = 'ZPRA'.
* TP_DATA-MEINH = 'ZI'.
* TP_DATA-KSCHL = 'B4'.
 IF TP_DATA-KMEIN = 'ZI'.
 TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
 ELSE.
 READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
* READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'CT'.
 TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
* * WA_MARM2-UMREZ / WA_MARM2-UMREN.
 TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
 ENDIF.
 ELSEIF TP_DATA-KSCHL = 'ZPRB'.
* TP_DATA-KSCHL = 'L0'.
* TP_DATA-MEINH = 'ZI'.
 IF TP_DATA-KMEIN = 'ZI'.
 TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
 ELSE.
 READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
* READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'BAG'.
 TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
* * WA_MARM2-UMREZ / WA_MARM2-UMREN.
 TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
 ENDIF.
 ELSEIF TP_DATA-KSCHL = 'ZPRC' OR TP_DATA-KSCHL = 'ZPRD'.
* TP_DATA-MEINH = 'ZI'.
 IF TP_DATA-KMEIN = 'ZI'.
 TP_DATA-KHETR = TP_DATA-KBETR * '1.17'.
 ELSE.
 READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
* READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'WZI'.
 TP_DATA-KBETR = TP_DATA-KBETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
* * WA_MARM2-UMREZ / WA_MARM2-UMREN.
 TP_DATA-KHETR = TP_DATA-KBETR * '1.17'.
 ENDIF.
 ELSEIF TP_DATA-KSCHL = 'ZPR3'.
* TP_DATA-KSCHL = 'B2'.
 IF TP_DATA-KMEIN = 'ZI'.
 TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
 ELSE.
 READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
* READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'BAG'.
 TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
* * WA_MARM2-UMREZ / WA_MARM2-UMREN.
 TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
 ENDIF.
 ENDIF.
 TP_DATA-MEINH = '01'.
 MODIFY TP_DATA.
E_T_DATA-MATNR = TP_DATA-MATNR.
E_T_DATA-KSCHL = TP_DATA-KSCHL.
E_T_DATA-KHETR = TP_DATA-KHETR.
E_T_DATA-KBETR = TP_DATA-KBETR.
E_T_DATA-KMEIN = TP_DATA-KMEIN.
E_T_DATA-DATAB = TP_DATA-DATAB.
E_T_DATA-DATBI = TP_DATA-DATBI.
APPEND E_T_DATA.
 CLEAR WA_MARM1.
 CLEAR WA_MARM2.
ENDLOOP.
Edited by: Shen Peng on Oct 20, 2010 10:09 AM

How to obtain the pricing condition data from sales data?

Hi all! I have googled many times and read through many sites to understand how I can obtain the pricing condition data that's specific to a specific sales line. However, the answer I got usually are as follow:
Tables to be used:
KONV
KONH
KONP
VBRK
VBRP
And the thing is to obtain KNUMH data from VBRP and link it to KONP which will get the exact pricing condition data that's relating to the specific transaction.
However, my challenge is that the field KNUMH in either VBRP or VBAP, it is empty. Therefore, how can I have a report with my sales data as the primary file, and appending the pricing condition data so that I can analyze the different kinds of pricing condition types that the company is using. The only field that I can use is KNUMV which does not give me the pricing condition that was used in this particular invoice line.
I also know that there is the A*** tables, which contains the KNUMH file. However, this file is split into many different tables. Thus, is there a more efficient method to download all the data? In any case, I still do not know how to link to my sales data.
FYI, I only have SE16N and VK13's access.
I hope that someone can help me, please!
Thank you!

Hi,
Data flow :
BW :
When u right click on the Master Data Info object -> Select Data flow.Then it will show u the details like DS name,IS (If 3.x)
Once u know the DS then you need to find out the source tables for the R/3 DS.This information will get using ROOSOURCE or ROOSFIELD tables or help.sap.com.
My suggestion better to search in Help site for DS source tables.
DS Tables :
The following link will provide you the source tables for some of the LO DS.
https://wiki.sdn.sap.com/wiki/display/BI/BWSDMMFIDATASOURCES
Regards
Ram.
Edited by: Ramakanth Deepak Gandepalli on Dec 22, 2009 9:29 AM

Issue for retrive data from ITAB

Case:HOW CAN WE FETCH DATA FROM TRANSPARENT TABLE
scenario:calculating net price for material on sales order
(on the basis of material number,sales organization,distribution channel,division,sale to partY ,sales office)
For this 5 prices are calculated :
a)zmrp
b)zlbj
c)zmlb
d)zdij
e)mwst
A bapi is developed through which all these data are fetched using joins on transparent and pooled tables.
Bapi is properly working in Sap Environment.But when fetching data from non sap environment(.NET) only pooled tables are returning data.
Transparent tables are returning blank data.
And also if in query of transprent table if in " where Clause " all parameters are hard codded then transparent table also return data in non sap envirnment.
for eg...
instead of writing ---
select data from tranparent table where matnr= (matnr variable made in bapi entered by user) and vkorg=(sales org variable made in bapi) ....same with all conditions
if we write(returing data)----
select data from tranparent table where matnr='5476665987' and vkorg='1400' ....same with all conditions
                                                                                FUNCTION ZBAPI_BAR3.
""Local Interface:
*" IMPORTING
*"     VALUE(MATNR) TYPE ZBAPI_IMPORT2-MATNR
*"     VALUE(VKORG) TYPE ZBAPI_IMPORT2-VKORG
*"     VALUE(VTWEG) TYPE ZBAPI_IMPORT2-VTWEG
*"     VALUE(KUNNR) TYPE ZBAPI_IMPORT2-KUNNR
*"     VALUE(SPART) TYPE ZBAPI_IMPORT2-SPART
*"     VALUE(AUART) TYPE ZBAPI_IMPORT2-AUART
*"     VALUE(VKBUR) TYPE ZBAPI_IMPORT2-VKBUR
*" EXPORTING
*"     VALUE(RETURN) TYPE BAPIRETURN
*" TABLES
*"      ITAB STRUCTURE ZBAPI_TABLE3
DATA: LAND1 LIKE KNA1-LAND1 ,
        REGIO LIKE KNA1-REGIO ,
        WERKS LIKE VBAP-WERKS ,
       KNUMH LIKE A004-KNUMH ,
               KNUMH LIKE ZBAPI_TABLE3-Knumh ,
        KBETR   LIKE COND_KONW-Kbetr ,
       LIKE ZBAPI_TABLE3-KBETR ,
      KNUMH1(10) TYPE C ,
            KNUMH2(10) TYPE C ,
            KNUMH3(6) TYPE C ,
     KNUMH2 LIKE ZBAPI_TABLE3-KNUMH ,
     KNUMH3 LIKE ZBAPI_TABLE3-KNUMH ,
     KNUMV LIKE ZBAPI_TABLE3-KNUMV ,
        KDGRP LIKE KNVV-KDGRP ,
        TAXKD LIKE KNVI-TAXKD ,
        TAXM1 LIKE MLAN-TAXM1 ,
        ADRNR LIKE TVBUR-ADRNR ,
        REGION LIKE ADRC-REGION ,
        DATE TYPE A503-DATAB .
SELECT SINGLE KDGRP FROM KNVV INTO KDGRP WHERE KUNNR = KUNNR AND VKORG = VKORG AND VTWEG = VTWEG AND SPART = SPART   .
SELECT SINGLE LAND1 REGIO FROM KNA1 INTO (LAND1,REGIO) WHERE KUNNR = KUNNR .
SELECT SINGLE WERKS FROM VBAP INNER JOIN VBAK ON VBAPVBELN = VBAKVBELN INTO WERKS WHERE AUART = AUART .
SELECT SINGLE TAXKD FROM KNVI INTO TAXKD WHERE KUNNR = KUNNR AND ALAND = LAND1 AND TATYP = 'MWST' .
SELECT SINGLE TAXM1 FROM MLAN INTO TAXM1 WHERE MATNR = MATNR AND ALAND = LAND1 .
SELECT SINGLE ADRNR FROM TVBUR INTO ADRNR WHERE VKBUR = VKBUR .
SELECT SINGLE REGION FROM ADRC INTO REGION WHERE ADDRNUMBER = ADRNR   .
DATE = SY-DATUM .
SELECT SINGLE KNUMH FROM A931 INTO KNUMH1 WHERE KAPPL = 'V' AND KSCHL = 'ZMRP' AND VKORG = VKORG AND VTWEG = VTWEG AND WERKS = '1410' AND KUNNR = KUNNR AND MATNR = MATNR AND KFRST = SPACE AND DATAB LE DATE AND DATBI GE DATE .
SELECT SINGLE KNUMH FROM A931 INTO KNUMH1 WHERE KAPPL = 'V' AND KSCHL = 'ZMRP' AND VKORG = '1400' AND VTWEG = '10' AND WERKS = '1410' AND KUNNR = '0000100163' AND MATNR = 'A10AN027PNSL' AND KFRST = SPACE AND DATAB LE DATE AND DATBI GE DATE .
SELECT SINGLE zkarigar FROM zkari INTO KNUMH1 WHERE erdat = '20070410' .
SELECT SINGLE KNUMH FROM A004 INTO KNUMH1 WHERE KAPPL = 'V' AND KSCHL = 'ZMRP' AND VKORG = VKORG AND VTWEG = VTWEG AND MATNR = MATNR AND DATAB LE DATE AND DATBI GE DATE .
*'0000280050'
CLEAR KNUMH .
CLEAR KBETR .
SELECT SINGLE KNUMH FROM A503 INTO KNUMH1 WHERE KAPPL = 'V' AND KSCHL = 'MWST' AND ALAND = LAND1 AND WKREG = REGION AND REGIO = REGIO
AND TAXK1 = TAXKD AND TAXM1 = TAXM1 AND KFRST = SPACE AND DATAB LE DATE AND DATBI GE DATE and knumh = '0000279708'.
concatenate '0000' KNUMH into knumh1 .
**KNUMH1 = KNUMH .
**select single kbetr from konp into kbetr where knumh = knumh1 .
**knumh3 = knumh1+4(6) .
***itab-kbetr = kbetr .
**concatenate '0000' knumh3 into knumh2 .
**write:/ knumh2 .
ITAB-KNUMH1 = KNUMH2 .
ITAB-KNUMH1 = KNUMH1 .
APPEND ITAB .
*loop at itab .
*write:/ itab-knumh1 .
*endloop .
CLEAR KNUMH .
CLEAR KBETR .
SELECT SINGLE KNUMH FROM A940 INTO KNUMH WHERE KAPPL = 'V' AND KSCHL = 'ZDIJ' AND VKORG = VKORG AND VTWEG = VTWEG AND KDGRP = KDGRP AND MATNR = MATNR AND KFRST = SPACE AND DATAB LE DATE AND DATBI GE DATE .
SELECT SINGLE KNUMH FROM A931 INTO KNUMH WHERE KAPPL = 'V' AND KSCHL = 'ZDIJ' AND VKORG = VKORG AND VTWEG = VTWEG AND WERKS = WERKS AND KUNNR = KUNNR AND MATNR = MATNR AND KFRST = SPACE AND DATAB LE DATE AND DATBI GE DATE .
ITAB-KNUMH = KNUMH.
APPEND ITAB .
CLEAR KNUMH .
CLEAR KBETR .
ITAB-KNUMH = KNUMH .
APPEND ITAB .
COMMIT WORK AND WAIT.
ENDFUNCTION.
Thanks & Regards
Amrish

Hi,
Please Check this => The specified item was not found.
How to post code in SCN, and some things NOT to do...
Faisal

Issue while uploading data from flatfile to Transaction(VK13).

Hi All,
I am facing an issue while uploading the data from flatfile to the transaction(vk13). My flat file is as shown below.
SalesOrganization DistributionChannel Customer Material Releasestatus Amount Currency Quantity UOM ValidFrom ValidTo
2000 01 0010029614 AT309739 A 20.00 USD 1 PC 09/11/2014 12/31/9999
If I upload these data using the RV_CONDITION_COPY FM it is succesfully uploading to the relevant tables(konh,konp) but in the tcode VK13 I am getting all values fine, except UOM. Instead of PC it is showning as ***. I did not understand why it is happening please give an idea to solve my issue.
Regards,
Chakradhar.

Hi Raymond,
Thanks for your reply.Yes,If I use CONVERSION_EXIT_CUNIT_INPUT in my program the issue is, Assume If the user is giving PC as value for UOM field in flat file and upload the flat file.It is successfully uploading the value PC to the UOM field in transaction VK13 but the in the database table(konp) it is showing the value as ST.
Regards,
Chakradhar.

Extract kbetr & konwa from konp.

Hi ABAPers,
I have data from VBRK & VBRP tables.
Now i want to extract data from KONP by using VBPK & VBRP data.
Any one of u suggest me the relation between VBRK,VBRP and KONP.
Sunil.

Hi Sunil
I guess you are tying to extract the conditions for Billing Documents.
Relation is:
 KONV-KNUMV = VBRK-KNUMV
KONV-KPOSN = VBRP-POSNR
Kind Regards
Eswar

Refreshing the Data from a embed view in a view container

Hi everybody
I would like to know how can I do to refresh all data from a View with a view container the problem is:
that I have a window that has a view at the same time this has a view container. The Main view brings the data of editable elements when I select one element of the main view the view container brings a list for that element (dependencies) but only the first time a choose an element loads the correct data, when I choose another one it brings the same old data and doesn't make the call for the wdDoInit() method.
The question is:
How do I force the view to refresh all the data or call again the wdDoInit() method?
Thank you for your help

Aida,
Lets say you have two components C1 and C2 and you want method from C1 to be available in C2 then follow these steps:-
1) Goto the Interface Controller of C1 and create a method there lets say doSomething
2) Then goto C2. There you can see Used Web Dynpro Components --> Right click Add Used Component --> Give some name say C1Comp --> Click browse and select C1 --> Click Finish.
3) Next goto Component Controller of C2 --> Properties --> Click Add and check if C1 is added. If not then select the checkbox and select OK.
4) Now goto Implementation tab of C2 and lets say wdDoInit you can write following code:-
wdThis.wdGetC1CompInterface().doSomething();
Chintan

Issue when uploading Sales data from DSO to Cube.

Dear All,
I have an issue when I am uploading Sales data from DSO to Cube. I am using BI 7.0 and I have uploaded all sales document level data to my DSO. Then I use a transformation rule to calculate the Sales Value when I am doing DTP to cube. Cube has customer wise aggregation data.
In DSO I have NetPrice(KF) and Delivered_QTY(KF). I do a simple multiplication routine in the transformation from DSO to Cube.
RESULT = SOURCE_FIELDS-NET_PRICE * SOURCE_FIELDS-DLV_QTY .
At the moment I use Active Table(With out Archive) on the DSO to get the data since this is my first load.
Issue is that the figure (Sales Value) in the cube is incorrect. I am getting a very large values which is impossible.
Can someone please help me.
Shanka

Hi,
are you sure that cube has customer wise aggregated data..since it will always aggregate the values of the key figures for the same set of characters...
did you checked the values for the key figures as well and if even they are inflated or is the problem with this key figure only.
During the data load the records may aggregates first for the same values of characters and then multiplication will be happening....if that is the case then you may have to multiply the values before storing it in the data package and then let it aggregate....can be achived through start routine...
but first verify if other key figures are also having the same issue.
Thanks
Ajeet

How to create a report to bring all data from two different Info providers

Hi All,
I have a peculier problem while creating a report. I have two custom info providers one DSO and another Cube. There are only two common fields between these two Info providers . I need to create a report such that the report displays all the values from DSO but user can have the selection option on one of the fields in the Cube.
Here is an example
DSO Contents:
DocNum-     DocItem-     DocText-     Amount-      Quantity
10000----     10----            ABC----          100----           10
10001----     20----     DSN----     200----     10
10005----     20----     DSN----     200----     10
Z1003----     10----     CAN----     500----     1
Cube Contents
DocNum-     DocItem-     Date-----          InvoiceAmt
10000----     10----     1/10/2009----         50
10001----     20----      2/20/2009----        100
10005----     20----      2/25/2009----        100
The report needs to be displayed as shown below when the user selects value for date from 1/10/2009 to 2/20/2009
DocNum-     DocItem-     DocText-     Amount-      Quantity
10000----     10----     ABC----     100----     10
10001----     20----     DSN----     200----     10
I hope this was clear for you to understand. I would really appricate if any one can answers about how to resolve this problem. I cannot add the date filed to DSO and I also have Doc Num and Item as the user selection fields in the report.
Thank you all in advance and i would really appreciate for your suggestions.
Regards
Chinna
Edited by: chinna2479 on Mar 3, 2009 7:38 PM
Edited by: chinna2479 on Mar 3, 2009 7:39 PM

Hi chinna,
Two possible options, I can think of now, but both of them may be a compromise with performance.
1. create an infoset and then a query on top of it, provided we have a one to one relation in both the targets. That is, the combination of doc and item number is not duplicate in either cube or ODS.
2. Create a master data object of doc and item number and have date as an attribute. Load that from cube data and make date as navigational attr.
Use this navgntal attr for selection in your report.
Let us know, if you require any further info.
Naveen.A

Upload data from Excel to BI

Hi 2 all,
Can anyone please send me the complete steps for uploading of data from excel to BI??
Also tell me that when we use DSO or when we use infocube? and if we design query in query designer then we use info cube fields or DSO fields??
Please respond.
Regards,
Aisha Ishrat
ICI Pakistan Ltd.

Hi,
there is no separate Tcode for 3.5 environment... but in RSA1 itself they give 3.X functionality also.. So, if you want to follow the 3.5 procedure you can go thru that... in the Infosource tab--> select your info area -->and right clcik it.. ->in that create INFOSOURCE 3.X.. for that just right clcik ur CUBE or DSO and --> Additional functions --> Update Rules.. and like that you can follow the same procedure which you done in 3.5..
and for data loading in BI 7.0 from fla file means
fisrt create one Cube or DSO with the same structure which you have in flatfile..
and activate it..
->now comes to Datasource tab> create one Datasource here you need to select type of data for example.. select Transactional data --> and menntion your flatfile name in extraction tab- and file type and eneter your info object names in FIELDS tab --> and load preview data Activate it..
now select your datasource and create info package and schedule it.. now your data will loded in to PSA level...
> and now comes to info provider select your cube.. and right clcik it.. and create transformations.,. and activate it..
> and create DTP -- Activate it.. and Execute it..
1)Create datasource. Here u can set/check the Soucre System fields.
2)Create Transformation for that datasource. (no more update rules/transfer rules)
2.1) While creating transformation for DS it will ask you for data target name, so just assign where u want to update ur data.
DataSource -> Transformation -> (DTP)-->Data Target
Now if you want to load data into data target from Source System Datasource:
1) Create infopackage for that data source. If you are creating infopackage for new datasources, it will only allow you update upto PSA, all other options u can see as disabled.
2)Now Create DTP (Data Transfer Process) for that data source.
3) NOw schdule the Infopackage, once the data is loaded to PSA, you can execute your DTP which will load data to data target.
Data Transfer Process (DTP) is now used to load data using the dataflow created by the Transformation. Here's how the DTP data load works:
1) Load InfoPackage
2) Data gets loaded into PSA (hence why PSA only is selected)
3) DTP gets "executed"
4) Data gets loaded from PSA into the data target once the DTP has executed
1) Create a data source
RSA1->Source Systems->FILE(File)->PC_FILE(Filesourcesystem)->Create Application Component(optional)-Create Data source
2) Create the data provider
3) Create Transformation
Right click on the data provider, choose 'create transformation' and choose your data source (give relevant data source and its type)
Just connect the relavant fields between your data source and data provider.
4) Create DTP
Then Double click on the DTP node created under yous transformations. choose the extraction mode
5) Load the data: there are 2 ways:
you can run the infopackage and DTP separately or create a process chain consisting of these infopackage and DTP and run.
Also check /people/sankar.kumar/blog/2006/10/11/loading-text-filestxt-into-bw-with-hex-option for hex option
Thanks,
Sankar M

How can I Move data from one column to another in my access table?

I have two columns, one that stores current month’s data and one that stores last month’s data. Every month data from column 2 (this month’s data) needs to be moved to column 1 that holds last month’s data. I then null out column 2 so I can accumulates this month’s data.
I understand how to drop a column or add a column, how do I transfer data from one column to another.
Here is my trial code:
<cfquery name="qQueryChangeColumnName" datasource="#dsn#">
ALTER TABLE leaderboard
UPDATE leaderboard SET points2 = points3
</cfquery>
Unfortunately, I get the following error:
Error Executing Database Query.
[Macromedia][SequeLink JDBC Driver][ODBC Socket][Microsoft][ODBC Microsoft Access Driver] Syntax error in ALTER TABLE statement.
How can I transfer my data with the alter table method?

I looked up the Access SQL reference (which is probably a
good place to start when having issues with Access SQL), and
it suggests you probably need a WHERE clause in there.
I agree the documentation is a good place to start. But you should not need a WHERE clause here.
Too few parameters. Expected 1.
If you run the SQL directly in Access, what are the results? At the very least, it should provide a more informative error message..

How do i transfer data from one internal tabe to another.

Hi All,
 How do i transfer data from one internal tabe to another.
 Can i do it ebven if he tables are different in structure.
Please Advice.
Thanks in advance.

Hi Saket Tiwari,
I hope the earlier post by kashyap is good enough an answer. anywas in addition to it let me give a detailed
explanation of how you can populate an internal table.
1) Append data line by line.
 Syntax : APPEND [<wa> TO / INITIAL LINE TO] <itab>.
this appends new line to internal table <itab>.
2) Using COLLECT statement.
 COLLECT is another form of statement used for populating the internal tables. Generally COLLECT is used while inserting lines into an internal table with unique standard key. The syntax for COLLECT statement is as shown
 Syntax : COLLECT [<wa> INTO] <itab>.
3) Using INSERT statement
 Syntax INSERT [<wa> INTO / INITIAL LINE INTO] <itab> [index <idx>].
INSERT statement adds a line/work area to the internal table. You can specify the position at which the new line is to be added by using the INDEX clause with the INSERT statement.
Now coming to your request..
To append part or all of an internal table
 Syntax
 APPEND LINES OF <itab1> [FROM <n1>] [TO <n2>] TO <itab2>.
* Note:
Without the FROM and TO options, this statement appends the entire table <itab1> to <itab2>.*
b) To insert part or all of an internal table into another internal table
 Syntax
 INSERT LINES OF <itab1> [FROM <n1>] [TO <n2>]
 INTO <itab2> [INDEX <idx>].
c) Using Move statement.
To copy entire contents of one table into another in one execution
 Syntax MOVE <itab1> To <itab2>.
 OR
 <itab1> = <itab2>.
but u hav to be careful because he contents of itab2 will eb overwritten on the execution of this statement.
These copy the contents of ITAB1 to ITAB2. Incase of internal tables with header line we have to use [] inorder to distinguish from work area. So, to copy contents of internal tables with header line the syntax becomes,
ITAB1[] = ITAB2[].
Coming to the letter part of your question, Yes, we can copy values between tables having different structures.
for this we use
 MOVE-CORRESPONDING <itab1> TO <itab2>
 this executes the statement for their header lines. Searches for the sub-fields which occur both in itab1 and itab2 and then generates, for all relevant field pairs which correspond to the
 sub-fields ni , statements of the form MOVE itab1-ni TO itab2-ni. The other fields remain unchanged.
I hope the information provided has been of your help.
Reward if useful.
Regards,
Jose

How do I transfer data from one exterior harddrive to another?

How do I transfer data from one exterior harddrive to another when they are both connected to our Imac Desktop?

Depends what you want to transfer...
A few more Details about what you are trying to achieve would be good.

How can I transfer all my data from my current iCloud account to a new one?

Hello,
Please allow me to explain my situation:
I currently use an iCloud account named, for example, [email protected]
I have recently rebranded my business from www.current.com to www.new.com.
Because of this, I would like to create a new iCloud account with an email account name of [email protected]
I realize that I can achieve a similar result by adding an alias of [email protected] from my [email protected] email, but I would like to change my account name for the iCloud service itself as well, not just email. This is for aesthetic reasons because I would like to have the same login for everything I use.
How I can transfer all my iCloud data from [email protected] to [email protected]? I would like to transfer all data completely, as I use every feature of iCloud extensively, including email folders, notes, Safari bookmarks, etc.
Thank you very much, I look forward to your response.
Edward

I made a reply to your other post

Concatenation of Data from 4 infoobjects into a single cell in Bex Report

Hi,
I have loaded ODS with the description data. The source system for loading the ODS is the flat file. The ODS data should be a replica of the flat file.
In the flat file, there is a description field corresponding to a particular ID. This Description is greater than the standard 60 char length. So, I had to split the description while loading the flat file using single line routine in the Transfer Structure.
So, while loading different the data, I split the description field data from the flat file into 4 infoobjects and the flat file data was loaded into the ODS.
Now, from the reporting point of view, I need to display the entire description data from the 4 info-objects into a single cell in the Bex report.
Please suggest a solution for this.
****Points will be awarded***

Hi Vineet,
Thanks for the response.
Could you please help me out with the VBA script(code) that needs to be written in the macro.
Thanks in Advance.
****Points will be awarded****
Regards,
Hitesh Shetty.

Data from KONP.

Similar Messages

Maybe you are looking for