Data from report modified in Crystal not pulling in software

Hi - I use an Industry specific software called Buy Back Pro and I have created a custom report by simply modifying an existing report in buy back pro through crystal reports.
I did not change any of the fields just added a header and footer, and added a new column to the reports. When i run the report in Buy back none of the data is pulling from buy back pro. Is there something I need to do differently?

Hello,
Never heard of that program. If it works in CR Designer your only option is to wait for someone else who may use their software also or post you question to them for help.
Thank you
Don

Similar Messages

Failed to read data from report file : Reason: Crystal Reports: Print Engin

Hi,
When we try to migrate the crystal reports from BO R2 to BO R3, some of the reports are faling with the error:
Failed to create a new Report.Reason: Failed to read data from report file C:\DOCUME~1\xxxxx.rpt. Reason: Crystal Reports: Print Engine Error
Would please someone help me in fixing the issue.
Thanks and Regards,

Few quick checks to identify the cause -
1. Are you able to run report in your R2 system?
2. In XI3.1, check SIA running on which account.
3. Check the acount have sufficient rights on file system and registry.
4. What's your web server?
Give proper rights and import again. Hopefully it will resolve.
Edited by: Das on Dec 6, 2010 9:47 PM

Failed to read data from report file Reason: The table could not be found.

BO Enterprise XI R2, cannot publish crystal reports using the publishing wizard.
Failed to read data from report file Reason: The table could not be found.
Any ideas to get around this would really help out.
Regards

Connection used Views, ODBC System DSN is setup properly.
Approach for import from business view manager and import wizard. both methods failed to import the Business View and underlying reports.
I figure I may have imported the Business View wrong? From Business View Manager I exported from my dev server then imported to prod server.
Apparently I learned exporting my business view also includes the Data Connections that the Business Views are dependent upon.
So which ever folder you specify it copies it there. Originally the all Data Connections Resides on the root folder. To return it to the original location. I deleted what I had exported. Exported this time to the root folder, then only deleted the business views, foundation, elements. Then exported again to the folder where I intended then only deleted the Data Connection.
Makes any sense? So I then had to re point the business views and all the dependent objects to the data connection that resides in the root folder.
I tested the connection, it works fine. I properly updated my crystal reports to the business view in production. Did a sample extract it works as expected.
However when i try to publish, either from Crystal or Publish wizard i get the same error?
As a work around i am thinking, after updating the business view in the crystal reports, shall i re map the fields?? or reexport the business views again?
Any help will be surely appreciated.

Failed to read data from report file, failed to read parameter object

Error message when doing a u201CSchedule List of Valuesu201D
failed to read data from report file,
c:\docume~1\user........
failed to read parameter object
Earlier in the day it worked just fine nothing had been changed.
I have admin right on the windows server and in central management console
Can someone please help with this issue.

Hi Glenn
Please let us know the following:
1.What is the exact version of Crystal Reports Designer?
2.What is the version of Business objects Enterprise installed on the machine?
3.Are reports based on Business views,Deski,Webi?
4.Are the reports migrated from older version of Crystal Reports to new Version?
Thanks
Shraddha

Failed to read data from report file

Hello ,
When iam trying to publish crystal report to Bo enterprise using Publish wizard, i get below error
*"Failed to read data from report file C:\Users\prakash\Desktop\new_obj.rpt. Reason: File I/O error. File ~cidbc64f360135e0.rpt."*
can you please help me in resolving it
Regards,
KumarTP

Please post this to the [Business Objects Enterprise Administration|BI Platform; forum.
- Ludek

How to export data from report to excel using report 10g

Hi,
usnig report 10g, can we export the data from report to excel.
Regards
Randhir

Hi,
have a look at metalink note 209770.1: Getting Reports Ouput to MS Excel - Techniques and References
Regards
Rainer

Error Message: Data from Business Add-In ME_PROCESS_PO_CUST not transferred

Hi All,
I have done a BADI implementation for ME_PROCESS_PO_CUST and when I try to convert a PR to PO using ME59N in ECC u2013 AFS System I am getting below error message.
Data from Business Add-In ME_PROCESS_PO_CUST not transferred.
I am trying to populate certain PO fields ( ekko and ekpo ) from PR fields. But the above error occurs when I update the Ex Factory Date manual that is EKPO-J_3AEXFCM.
I am updating this in the method PROCESS_ITEM and what I found while debugging is in the class CL_PO_HEADER_HANDLE_MM, in the implementation of IF_FLUSH_TRANSPORT_MM~START, the contents of field u2018my_iteration_countu2019 keeps increasing and becomes 10 and raises this error.
I read few of the related questions raised by others in this forum and understood that this can happen if I try to change the field that is disabled ( greyed) in ME22N. But this field that I am talking about is enabled.
I also tried to move my code of populating the field EKPO-J_3AEXFCM from the PROCESS_ITEM to the enhancement point just above the user exit EXIT_SAPMMO6E_018 but still it doesnu2019t resolve the error.
(We donu2019t want to use User Exit and hence we are trying with BADIs or enhancement point.)
Can anyone please help me with this. I also found an OSS note 1334046 but not sure if that can resolve my issue.
Thanks in advance.
Ameesha.

Hi Ameesha,
i think u need to implement the BADI ME_PROCESS_PO_CUST in SPRO settings.
SPRO>Purchasing>Business Add-in Purchasing-->BAdI: Enhance Processing of Enjoy Purchase Order
try this once.
All check this link.
[Error Message: Data from Business Add-In ME_PROCESS_PO_CUST not transferred;
Hope it helps.
Regards,
Raj

Data from Business Add-In ME_PROCESS_PO_CUST not adopted

Hi,
I am trying to find out an exit or badi for Updating Tax Unit of Measure in transaction ME21n.( Auto Po Creation)
The scenario is like this...
The system assumes Base Unit of Measure for all its calculations. If the order UOM of a part happens to be different from the base UOM or if an alternate UOM then the system should consider the UOM.
The Base UOM needs to be passed to BAPI during the upload process into SAP so that the ORDER will either be created in the base UOM or the appropriate conversion factor will be taken into account when calculating the order quantity if the order UOM happens to be different from the base UOM.
If no UOM is specified in the input of the BAPI call then the system should put the base unit of measure for the part instead.
For the above I have written logic in BADI ME_Process_PO_CUST and Method Proess_Item..
The code is below,
select single meins bstme into (wa_meins, wa_bstme) from mara where
matnr eq wa_mepoitem-matnr.
if not wa_bstme is initial.
    if wa_mepoitem-meins <> wa_bstme.
      wa_mepoitem-meins = wa_bstme.
      call method im_item->set_data
        EXPORTING
          im_data = wa_mepoitem.
    else.
      wa_mepoitem-meins = wa_meins.
      call method im_item->set_data
        EXPORTING
          im_data = wa_mepoitem.
    endif.
When I try to create purchase order ,I am getting the following error message...
Data from Business Add-In ME_PROCESS_PO_CUST not adopted
Message no. MEPO151
Diagnosis
An endless loop occurred during the processing of the Business Add-In ME_PROCESS_PO_CUST. The system terminated the processing.
Procedure
Contact your system administrator.
Procedure for System Administration
Check whether standard fields are changed in the implementation of the Business Add-In ME_PROCESS_PO_CUST.
Changes to standard fields that are part of the Include structure MEPOITEM_TECH and/or MEPOSCHEDULE_TECH are generally not allowed. In addition, no field values that are not changeable through the field settings in the Enjoy transactions can be changed in the BAdI. Correct the implementation accordingly.
Let me know if anyone face the same issue..
Regards,
Kumar

Hii Shahin ,,
Thanks for your information but I have done that also and found Message in Se91 and find message is triggering from another Standard Class CL_PO_HEADER_HANDLE_MM from method IF_FLUSH_TRANSPORT_MM_START so How can we confirm that problem is in Implementation not in method IF_FLUSH_TRANSPORT_MM_START ?
Thanks

How to make smartform get data from report painter???

hi all!
please tell me how to get data from report painter?
i has a report painter zabc ( create through t-code ke31).
I want get data from Zabc after run and show data by smartform.
plz help me!
thanks

Hi ,
Please check this link [SMARTFORM|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRSF/BCSRVSCRSF.pdf]
Regards,
Smart

The data from the infoprovider involved could not be checked'

Hi all,
In the the selection screen of the virtual provider through the option display data, am getting message text " the data from the infoprovider involved could not be checked" , and then it brings all the data from the r/3 function module irrespective of the selection by date in the virtual info provider. I am retrieving the data from r/3 function module(RFC) to bw function module assign to virtual infoprovider.
with regards,
Ram

Hi
A Virtual Provider does not store data. to view the data in it you will have to use it in a query and check its data.
Thanks,
Rajesh.
Please provide points to answers if you find them helpful

HT6533 Where can I find the third party app? I'm really in trouble that I can't record and check my blood glucose. Of cause I exported the data from app, but It's not readable for me. Please reply ASAP and give me other solution.

Where can I find the third party app?
I'm really in trouble that I can't record and check my blood glucose.
Of cause I exported the data from app, but It's not readable for me.
Please reply ASAP and give me other solution.

You find third-party apps in the App Store. What app are you looking for? Due to problems, Apple removed the ability to record that information in Health. You can always go back to whatever you used before three weeks Health was released. Why can you not check and record your blood glucose? I would assume you check it using blood samples and a glucose meter which has nothing to do with your phone. You should be able to record it in any number of apps, from Notes to purpose made third-party apps.

Failed to retrieve data from the database using Crystal Reports XI R2

I am using Crystal reports XI R2 and using the Universal Web Connector (connecting to Coghead). When I put some some of the fields from the database and run Preview I get "Failed to retrieve data from the database." . Where is this message coming from and how can I track down what the issue is?

Hi Jamie,
When you are trying to Browse Data of a field it is not poping up any window menas, it is unable to interact with database and get the data from database.
Try to create a new report using ODBC with Xtreem Sample Database. If you get the data in your report without any error then your connector is not working / unable to pull the data into your report.
You can find the supported platforms document in below link
http://support.businessobjects.com/documentation/supported_platforms/xi_release2/default.asp
Thanks,
Sastry

How to get data from function module in crystal report

Hi,
I installed Crystal Reports 2008 and BO SAP Integration kit for CR.
I connected successfully to SAP system from CR but unable to get the data into Report ...
But data is present in function module.
Could you please tell me what may be the reason ...!!
Thanks
Raghavendra

Hi,
I connected successfully to SAP system from CR but unable to get the data into Report with all the Input parameters and data is present in function module.
Note: - If we take Start date as input parameter in Crystal report data is coming for single parameter, whereas we take input parameters like Partner function, Region and Customer - we are not getting data. (These fields we created parameters in Crystal report)
In Function Module IMPORT Parameters are below mentioned and Export parameter is Blank
                                                                                Start Date (Mandatory field)
                                                                                Partner Function (Mandatory)
                                                                                Region
                                                                                Customer
Please let us know if required any information.
Regards,
Raghavendra

How to retrieve data from a dimension that is not directly joined to a fact

Hi,
In my case I have 2 dimensions and one fact. I need to runa report collecting data from all the three tables.
I need to do the following.
DIMA DIMB FACT1
FACT1 is joined with DIMA
DIMA is joined with DIMB
FACT1 is not Joined with DIMB.
My report should still retrieve information from DIMB by connecting FACT1 with DIMA and retrieve corresponding data from DIMB.
Please suggest how can I do this .
I am using 10.1.3 version of OBIEE
You help will be much appreciated.

Hi,
I think your data model is snow-flake schema,we can get the data from snow-flake schema also.Pull the columns from both fact and DIMB into criteria.It will display the result.
mark if helpful/correct...
thanks,
prassu

Need to export data from reporting server to SharePoint List

I have built a rudimentary dashboard using Excel and PowerPivot Gallery on SharePoint 2010. I successfully exported the first dataset to a SharePoint List that I can access from my dashhboard, making it fairly portable. (Whoop!) I've also found
that I can create a bunch of new lists. But I have not figured out how to update these lists daily.
The most critical is an existing Odata connection:
DataFeed_2_teams-company-com IMData. I am trying to update that list from the new report (.xls format). After saving it as .xlsx then closing and reopening, Odata and the existing connection are now enabled. But when I try to connect,
Excel tells me, "We can't use the data from this feed. Make sure the external data feed server is available and that your connection information is correct." The connection is available and I'm using the "authenticated user's account".
I really don't mind if the data is deleted every day.
Any ideas?
-=-=-=-=-=-=-=-=-
Another thing I've tried is exporting the data through the Table menu. But since the list already exists, I can't do anything with it.
Adios, Clay Harryman

Hi,
Do you have your Odata connection stored in a sharepoint list zo you can reference to that point?
Maurice
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer. Thank You

Data from report modified in Crystal not pulling in software

Similar Messages

Maybe you are looking for