Data from two different cube

Hi,
Cube 0TCA_UA:

Hi,
The scenario:
Cube 0TCA_UA
-Char 1: User
-Char 2: Authorization Object
Cube: 0TCA_HIE
-Char 1: Authorization Object
-Char 2: Nodes of Hierarchy
I would like to create a query to show result with User-Authorization Object- Nodes of Hierarchy.
How can this be achieved?
I have tried multiprovider, but it has not worked.
Please advise.
Best Regards,
UR

Similar Messages

APEX Application accessing data from two different databases

Hi All,
Currently as we all know that APEX Application resides in database and is connected to the schema of that database.
I want APEX Application to be running and accessing data from two different databases. Elaborating my question,
Currently, my APEX Production Application is connected with XXXX Schema of DB1 Database(Where APEX Resides). Now I want to add some pages into this APEX Application for REPORT Purpose, But I want to connect this REPORT APEX Pages to get data from Different Schema YYYY for Database DB2.
Is it possible to configure this scenario?
The reason for doing this is to avoid the REPORT related (adhoc queries) resource utilization effect on Production DB1 Database.
Thanks
Nil

1. If you do the joining of two or more tables in DB1 then all data is pulled over to DB1 and then the join is executed: so more data over the databaselink and more work for DB1. Better keep the joining stuff where the data resides and just pull exactly that data over that you need.
2. Don't know about your different block sizes. Seems a nice question for one of the other forums (DBA or SQL).
3. I mean create synonyms on DB1 for reports VIEWS in DB2.
Hope all is clear!

Report which reads data from two different systems

Hi experts!
By any chance, would be possible to create a report which is able to read from two different cubes and two different systems at the same time?
Kind regards.

Good afternoon Raul,
It should be possible to create a multiprovider on the two different cubes from the two sources
systems and report on this.
Best Regards,
Des

Is it possible to show data from two different sql tables?

Is it possible to show data from two different sql tables? Either to show combined data by using a join on a foreign key or showing a typical master detail view?
I have one table With data about a house, and another table With URL's to images in the blob. Could these two be combined in the same Gallery?
Best regards Terje F - Norway

Hi Terje,
If you have a unique key, you could use one of the following functions for your scenarios:
If you only have one image per house, you can use LookUp:
http://siena.blob.core.windows.net/beta/ProjectSienaBetaFunctionReference.html#_Toc373745501
If you have multiple images per house, you can use Filter:
http://siena.blob.core.windows.net/beta/ProjectSienaBetaFunctionReference.html#_Toc373745487
Thanks
Robin

Selecting data from two different tables.

Do we need to use join two tables with primary/foreign key while trying to use select statement for getting data from those to table.? If no who can i go about do it.

872959 wrote:
If i am using From clause to get data from two different tables, is it necessary that both tables have column of identical data in them.In general, they ought to (or you need to join in a third table that tells you how to map rows from one table to rows of the other table).
It is not strictly necessary that there be any join condition between tables. If you don't provide a join condition, Oracle has to do a Cartesian product. That means that if there are n rows in one table and m rows in the other, the result set will have n * m rows. It is very rarely a good idea to write queries that do Cartesian products but it does occasionally happen.
Justin

Differentiating Master Data from two different source systems

Friends,
i have used standard InfoObjects that provide master data for two InfoCubes which take data from two different source systems. Now the some of the master data is identical in both the source systems (example: 10 stands for "Industrial" in one whereas 10 stands for "Agricultural" in the other). What do i do so that the system(BW) differentiates the two.
Thanks in advance for all the help.
Mike

I tried to include the 0SOURSYSTEM in the compounding of this InfoObject (for master data) but it gives me a list of other objects that use this InfoObject as a reference characteristic and also says that this InfoObject is used in a ODS and data needs to be emptied in the ODS before activating this InfoObject. Please let me know if there is any way out of it.
Thanks
Mike

Loading master data from two different infosource.

Hi Experts,
I would like understand the mechanism behind loading data to masterdata infoobject from two different infosource.
Ex: I have one master data infoobject called A and it has 4 attributes B C D E.
now I am loading values for A B and C from INFOSOURCE1
D and E is getting loaded from INFOSOURCE2.
could ne one please explanin how this works and how all five values get merged in single record?
Please help
Best Regards
Falgun

Dear Falgun,
Component of an InfoSource:
An InfoSource is always a quantity of InfoObjects that logically belong together and are updated in data targets.
a. <b>InfoSources with flexible update</b>
An InfoSource with flexible update can be updated in any data targets (with the exception of hierarchies). Update rules are created for this InfoSource.
InfoObjects can be used in as many InfoSources and data targets as you like.
b. <b> InfoSources with direct update</b>
Using an InfoSource with direct update, master data (characteristics with attributes or texts) for an InfoObject can be written directly (without update rules) to the master data table.
Visit the following link for more information:
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
Hope this is helpful.
Regards,
Naveen.

How to create a report to bring all data from two different Info providers

Hi All,
I have a peculier problem while creating a report. I have two custom info providers one DSO and another Cube. There are only two common fields between these two Info providers . I need to create a report such that the report displays all the values from DSO but user can have the selection option on one of the fields in the Cube.
Here is an example
DSO Contents:
DocNum-     DocItem-     DocText-     Amount-      Quantity
10000----     10----            ABC----          100----           10
10001----     20----     DSN----     200----     10
10005----     20----     DSN----     200----     10
Z1003----     10----     CAN----     500----     1
Cube Contents
DocNum-     DocItem-     Date-----          InvoiceAmt
10000----     10----     1/10/2009----         50
10001----     20----      2/20/2009----        100
10005----     20----      2/25/2009----        100
The report needs to be displayed as shown below when the user selects value for date from 1/10/2009 to 2/20/2009
DocNum-     DocItem-     DocText-     Amount-      Quantity
10000----     10----     ABC----     100----     10
10001----     20----     DSN----     200----     10
I hope this was clear for you to understand. I would really appricate if any one can answers about how to resolve this problem. I cannot add the date filed to DSO and I also have Doc Num and Item as the user selection fields in the report.
Thank you all in advance and i would really appreciate for your suggestions.
Regards
Chinna
Edited by: chinna2479 on Mar 3, 2009 7:38 PM
Edited by: chinna2479 on Mar 3, 2009 7:39 PM

Hi chinna,
Two possible options, I can think of now, but both of them may be a compromise with performance.
1. create an infoset and then a query on top of it, provided we have a one to one relation in both the targets. That is, the combination of doc and item number is not duplicate in either cube or ODS.
2. Create a master data object of doc and item number and have date as an attribute. Load that from cube data and make date as navigational attr.
Use this navgntal attr for selection in your report.
Let us know, if you require any further info.
Naveen.A

Writing data from two different acquisition rates into one file

Hi,
I'm using a compactRIO, and I have an anemometer outputting data at 4Hz to the serial port on the controller, and I am using a 9237 module to read strain from two channels at 40Hz. I would like to record all this data in one file, but I'm unsure how to have the data points match up with respect to time since they are read at different rates. Basically I have 10 strain data points for every one anemometer data point, but that one data point needs to somehow be associated with the other 10 read in the same amount of time. It would be okay to "extend" the slower data to the 10 strain points, and likewise to the next ten when the anemometer refreshes its values.
Thanks for any input!
Andrew

Check out the Queue multi-plexer vi from the examples. C:\Program Files\National Instruments\LabVIEW 2009\examples\general\queue.llb\Queue Multiplexer.vi
If each data acquisition loop enqueues data to one file writing loop the data is writen in order. Queues are really a good way to multiplex data sources
Message Edited by Jeff Bohrer on 01-29-2010 09:44 AM
Jeff

Taking data from two different server in a single table

Hi All,
can u plz tell me i want take a data from a two different server in a single table
Thanks,
Bell.

Again, you have written the same sentence. I have 2 servers Server1 and Server2 and one table called my_table (You or God knows where this table is).
Now tell us what you want to do ?
Sidhu
http://amardeepsidhu.blogspot.com

How do you display data from two different data-sets on one list

I have a data-set that is displaying properly; I would like to add another data-set to the other portion of the form.
The first part of the data set has Product information (Product-Name, Product_number, etc),
The second portion of the data-set has information like (Product-campaign, Product-Sales, etc)
The two data-sets are mutually exclusive

Hi xitum,
As
Patrick Hurst mentioned, if the several tables didn't have any relationship with each other and you want to put all the information together to display in one report, you need to add several tablix/list in the same report and each tablix/list to display
the data from each table.
If the several table have a same relationship field you can use the
lookup function to get the other maped fields display in the same tablix/list.(this function supportted on the SSRS 2008 r2 and later version).
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

How to superimpose data from two different charts into a single chart?

I have a single chart that lists numbers by month for a two year period like this:
Jan 100
Feb 200
Jan 103
Feb 199
The numbers are all in the same column rather than different columns.
I'd like to creat a chart that plots the data for each year on the same X axis, so that I can see the two january numbers, the two february numbers, etc. on top of each other. But nothing I've tried seems to work. Numbers seems to always put the second january after the first december on the x axis rather than recognizing it as a new series to be superimposed on top of the original january.
Is there some way to fix this short of putting the data into a new column?

What your describing is a table of wht I would call raw data. I would also have a summary table that would use functions like sumif and sumifs, then make my chart off that. This table would have each month in a column and the years across as headers. ( if you're familiar with excel, it would be the equivalent of making a pivot table and chart, but manually).
Jason

Fetch Data from two different Lists (Based on criteria)

I have two lists. One is for Designations and another is for
Hirings. Designations list holds all available designations and Hiring list has list of hired employees. Data may look like following...
Designations list:
PostTitle
Software Engineer
Web Developer
Graphic Designer
Trainer
Manager
Team Lead
and Hiring list may look like following
Hirings list:
PostTitle
Employee
Start Date End Date
Trainer David
05-Jun-14
Manager Peter
06-Jun-14 30-Jun-14
PostTitle is lookup column in hirings list. Now, I have to create several views over this data... one of them is of "Vacant Posts" that will fetch all those records from Designations which are either not referenced in hirings or are referenced
in hirings but has some end date.
Vacant Posts View:
Fetch all records from Designation which are NOT in Hirings
UNION
Fetch all records from Designations which are in Hirings But has some END DATE.
Please guide me how can I create this Vacant Posts view ? Is their any out of the box functionality available ? what are the easiest possible ways to accomplish this?
Zia.

Yes You can Use CAML.
Below Query can be helpful to start with.
Function GetSharePointList1() {
context = SP.ClientContext.get_curre
nt();
oList = context.get_web().get_lists().getByTitle('SharePoint List 2');
var camlQuery = new SP.CamlQuery();
camlQuery.set_viewXml(query);
items = oList.getItems(camlQuery);
context.load(items);
context.executeQueryAsync(
Function.createDelegate(this, onSuccessSharePointList1),
Function.createDelegate(this, onFail)
function onSuccessSharePointList1(){
recNum = items.get_count();
      if(recNum != 0){
       var listItemEnumerator = items.getEnumerator();
       while(listItemEnumerator.moveNext()){
var oListItem = listItemEnumerator.get_current();
$().SPServices({
            operation: "GetListItems",
            async: false,
            listName: "SharePoint List 2",
            CAMLViewFields: "<ViewFields><FieldRef Name='Worklocation'/></ViewFields>",
            CAMLQuery: "<Query><Where><Eq><FieldRef Name='Title'/><Value Type='Text'>" + ReferenceID +
"</Value></Eq></Where></Query>",
            completefunc: function (xData, Status) {
            $(xData.responseXML).SPFilterNode("z:row").each(function() {
            Worklocation = ($(this).attr("ows_Worklocation"));
s = ..... (display all in table format)
       $("#resultTable").append(s);
       i++;
Thanks and Regards Rahul Dagar

Adding two column data from two different tables.

Hi, I have two tables i want to add two column with same id and put it in third table
T1 is
id Value
1 50
2 100
3 500
4 75
T2 is
id Value
3 -20
4 80
5 -30
6 -10
I want the out put as
1 50
2 100
3 480
4 155
5 -30
6 -10
i have written
select a.id,a.value+b.value from t1 a,t2 b where a.id=b.id(+)
this is not giving me the id's from t2.

select id, sum(value) from
(Select id,value from t1
union
select id ,value from t2
)group by id;

Single pivot from two different Essbase Cubes

Hi All,
I need to show the data from two different cubes into a single Pivot.
Is that can be achive at different levels like :-
1. Repository
2. Answers
3. Essbsae
If there is any another way to solve this problem.
Thanks In Advance
Brijesh.

Hi ,Banerjee.
Asuume that you Cube Structures like below..
Cube -1 : Clime No, Cliime Name, Location, Amount1, Amount2.
Cube -2 : Clime No, Plant, Material, Location, Amount3, Amount4.
In your Multiprovider you need to select the Charecteristics "Clime No" , and "Location" ,becasue it is common in both Cubes
and In Keyfigure : You can select all or only one or only two or one from Cube -1 and other from Cube - 2 it doesn't matter.
In this case it will disply in single line, but in your case I hope the charecteristics which you are selected in Multiprovider in Identification is wrong, if you don't select common Charecteristics, you won't get the report in single line.
For reference you can see the following BLOG which will explain exactly your problem and Solution.
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417500)ID0672843250DB01550372956869897428End?blog=/pub/wlg/4478
Thanks
Reddy

Data from two different cube

Similar Messages

Maybe you are looking for