Data Guard Installation

Hi all,
Just to confirm, i will install, configure Data Guard (i already done this before but with the primary database down) and i want to do that without interrupt the primary database. Do i need to shutdown primary database at any time of configuration of standby database?? I don't think so!
steps:
1-Configure all parameters
2-Take a backup
3-connect using rman target / auxiliary sys/passd@stbdb
4-duplicate the database
Is jus that ins't???
Tks,
Paulo.

Just to confirm, i will install, configure Data Guard (i already done this before but with the primary
database down) and i want to do that without interrupt the primary database. Do i need to shutdown
primary database at any time of configuration of standby database?? I don't think so!You are correct, the primary database does not need to be shutdown. Even though the example shown in the docs indicated MOUNT mode for the primary database, the primary can be in the OPEN mode to create the standby database.

Similar Messages

Data guard installation notes required.

can anybody help me with dataguard notes for oracle 11g.

Dear user3482841,
Welcome to the OTN forums.
Please refer to the http://tahiti.oracle.com and search for data guard administration topic. You can also search google and find some important white papers about the data guard in 11g.
Regards.
Ogan

Step by step data guard installation document for 10g and 11g

Hi
I am new to oracle data guard please provide me the proper step by step document.
thnks.

http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/partpage1.htm

Data Guard Agent, Authentication Failure

I'm working with two Windows 2003 servers, attempting to use one as a standby and one as a primary database use Data Guard. However, I'm having a bit of trouble when trying to get one server to communicate through the Management Agent and Management Service. I've done Management Agent installs on about 20 XP workstations and they've also worked wonderfully with the Oracle Grid Control.
When the agent on my would-be standby database instance starts up I'm receiving the following errors in emagent.trc:
2005-11-01 15:16:54 Thread-3836 WARN main: clear collection state due to OMS_version difference
2005-11-01 15:16:54 Thread-3836 WARN command: Job Subsystem Timeout set at 600 seconds
2005-11-01 15:16:54 Thread-3836 WARN upload: Upload manager has no Failure script: disabled
2005-11-01 15:16:54 Thread-3836 WARN upload: Recovering left over xml files in upload directory
2005-11-01 15:16:54 Thread-3836 WARN upload: Recovered 0 left over xml files in upload directory
2005-11-01 15:16:54 Thread-3836 WARN metadata: Metric RuntimeLog does not have any data columns
2005-11-01 15:16:54 Thread-3836 WARN metadata: Metric collectSnapshot does not have any data columns
2005-11-01 15:16:54 Thread-3836 ERROR engine: [oracle_bc4j] CategoryProp NAME [VersionCategory] is not one of the valid choices
2005-11-01 15:16:54 Thread-3836 ERROR engine: ParseError: File=D:\oracle\product\10.1.0\dg\sysman\admin\metadata\oracle_bc4j.xml, Line=486, Msg=attribute NAME in <CategoryProp> cannot be NULL
2005-11-01 15:16:54 Thread-3836 WARN metadata: Column name EFFICIENCY__BYTES_SAVED_WITH_COMPRESSION__AVG_PER_SEC_SINCE_START too long, truncating to EFFICIENCY__BYTES_SAVED_WITH_COMPRESSION__AVG_PER_SEC_SINCE_STAR
2005-11-01 15:16:54 Thread-3836 WARN metadata: Column name ESI__ERRORS__ESI_DEFAULT_FRAGMENT_SERVED__AVG_PER_SEC_SINCE_START too long, truncating to ESI__ERRORS__ESI_DEFAULT_FRAGMENT_SERVED__AVG_PER_SEC_SINCE_STAR
2005-11-01 15:16:54 Thread-3836 WARN metadata: Column name SERVERS__APP_SRVR_STATS__SERVER__REQUESTS__AVG_PER_SEC_SINCE_START too long, truncating to SERVERS__APP_SRVR_STATS__SERVER__REQUESTS__AVG_PER_SEC_SINCE_STA
2005-11-01 15:16:54 Thread-3836 WARN metadata: Column name SERVERS__APP_SRVR_STATS__SERVER__LATENCY__MAX_PER_SEC_SINCE_START too long, truncating to SERVERS__APP_SRVR_STATS__SERVER__LATENCY__MAX_PER_SEC_SINCE_STAR
2005-11-01 15:16:54 Thread-3836 WARN metadata: Column name SERVERS__APP_SRVR_STATS__SERVER__LATENCY__AVG_PER_SEC_SINCE_START too long, truncating to SERVERS__APP_SRVR_STATS__SERVER__LATENCY__AVG_PER_SEC_SINCE_STAR
2005-11-01 15:16:54 Thread-3836 WARN metadata: Column name SERVERS__APP_SRVR_STATS__SERVER__OPEN_CONNECTIONS__MAX_SINCE_START too long, truncating to SERVERS__APP_SRVR_STATS__SERVER__OPEN_CONNECTIONS__MAX_SINCE_STA
2005-11-01 15:16:54 Thread-3836 WARN metadata: Column name SERVER__APP_SRVR_STATS__SERVER__REQUESTS__MAX_PER_SEC_SINCE_START too long, truncating to SERVER__APP_SRVR_STATS__SERVER__REQUESTS__MAX_PER_SEC_SINCE_STAR
2005-11-01 15:16:54 Thread-3836 WARN metadata: Column name SERVER__APP_SRVR_STATS__SERVER__REQUESTS__AVG_PER_SEC_SINCE_START too long, truncating to SERVER__APP_SRVR_STATS__SERVER__REQUESTS__AVG_PER_SEC_SINCE_STAR
2005-11-01 15:16:54 Thread-3836 WARN metadata: Column name SERVER__APP_SRVR_STATS__SERVER__OPEN_CONNECTIONS__MAX_SINCE_START too long, truncating to SERVER__APP_SRVR_STATS__SERVER__OPEN_CONNECTIONS__MAX_SINCE_STAR
2005-11-01 15:16:54 Thread-3836 WARN metadata: Metric Wireless_PID does not have any data columns
2005-11-01 15:16:54 Thread-3836 WARN metadata: Metric numberOfAppDownloadsOverInterval_instance does not have any data columns
2005-11-01 15:17:00 Thread-4172 WARN vpxoci: OCI Error -- ErrorCode(1017): ORA-01017: invalid username/password; logon denied
SQL = " OCISessionBegin"...
LOGIN = dbsnmp/<PW>@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=MY_DATABASE)(PORT=1521))(CONNECT_DATA=(SID=CPD2DB)))
2005-11-01 15:17:00 Thread-4172 ERROR vpxoci: ORA-01017: invalid username/password; logon denied
2005-11-01 15:17:00 Thread-4172 WARN vpxoci: Login 0xe8c220 failed, error=ORA-01017: invalid username/password; logon denied
2005-11-01 15:17:00 Thread-4172 WARN TargetManager: Exception in computing dynamic properties of {MY_DATABASE, oracle_database },MonitorConfigStatus::ORA-01017: invalid username/password; logon denied
2005-11-01 15:17:01 Thread-4172 WARN vpxoci: OCI Error -- ErrorCode(1017): ORA-01017: invalid username/password; logon denied
I've already toggled the Local Security Policy (Log On As Batch Job) setting in Windows, unlocked the Monitoring Profile account, etc. I've also tried to set the Preferred Host Credentials for the database, but it doesn't seem to want to authenticate the Windows 2003 Administrator user.
Anyone have any other suggestions?

Check the following:
Does the user have administrative privilege on the system?
Is the user running this part of ORA_DBA group?
Does the user have the local security policy "Logon as Batch Job"?
Have you set the OS Preferred Credential? If you are a domain user, this will be looking for domain\user name instead of just the user name.
On another note:
Have you doen any upgrades to the OMS repository?
If yes, is the new Repository compatible with the EM Console?

11g Active Data Guard Software?

I got a copy of the 11g (for SUN SPARC) from the edelivery.com, and got the patch for 11.1.0.7 from metalink.
I upgraded 110.2.0.4 to 11.1.0.7. But, I could not get the ADG to work.
Here is what happened when I queried the database status.
--------------------------- begin ---------------------------------
SQL> alter database recover managed standby database cancel;
Database altered.
SQL> alter database open;
Database altered.
SQL> select status from v$instance
2 ;
STATUS
OPEN
SQL> select OPEN_MODE from v$database;
OPEN_MODE
READ ONLY
SQL> alter database recover managed standby database using current logfile disconnect;
Database altered.
SQL> select OPEN_MODE from v$database;
OPEN_MODE
MOUNTED
SQL> select status from v$instance;
STATUS
MOUNTED
---------------------------- end ------------------------------------
Turning on the Redo Apply put the database mode back to 'MOUNTED'. For ADG, it should remain 'OPEN'. I suspect this copy of 11g does not have the ADG feature.
Is there a way I could check whether the ADG is installed? Is there a directory under $ORACLE_HOME or a script under $ORACLE_HOME/rdbms/admin that indicates the ADG is indeed installed?
Where did you guys get your software?
Thanks very much in advance.

You should have the right software and the right option installations in Entreprise Edition (otherwise Data Guard would not work at all).
Did you check both alert log for possible error messages ?
I think you should open the database in read-only mode instead of read-write mode:
alter database open read only;See following OTN example: http://www.oracle.com/technology/pub/articles/oracle-database-11g-top-features/11g-dataguard.html
Edited by: P. Forstmann on Jul 9, 2009 9:29 PM
Edited by: P. Forstmann on Jul 9, 2009 9:34 PM

Data Guard, Grid Control 11, GI 11gR2, and DB 10gR2

Hi,
I'm seeing a rather odd behavior, and I'm hoping someone else has already been through this and knows what I'm doing wrong.
I have an installation of Grid Control 11.1 (recently patched) which I am using to create Data Guard replication of some 10gR2 database instances. For some confusing reason, sometimes when I use the GC wizard to add the standby database, it creates the listener for the new database in the EM Agent's OH/network/admin/listener.ora. Other times, it creates it in the 10gR2 DB's OH/network/admin/listener.ora. When it does the former, creation of the standby DB seems to work fine, but when it does the latter, not so much.
If it matters, my primary DB is 10.2.0.4 on 10.2 grid infrastructure, and my standbys are 10.2.0.4 on GI 11.2.0.2.
I have applied the latest PSU to my agents, so they are all the same version, so I'm confused as to why this might be happening. Has anyone else seen this issue?
Thanks,
Bill

My recommendation would be to not use OEM Grid Control to create your standby.
Even when it is working properly ... it does not create what I would consider a good implementation. Just as I don't consider the vanilla installation of the Oracle database by the OUI (all control files and redo logs in the same directory with the datafiles) very good.
You'd be far better off hand crafting your standby using two listeners ... one for public and one for replication.

Data Guard - Grid Control - Standby database

Heys,
now I have to RAC Clusters. The next step would be to setup a standby database to prepare a graceful switchover.
But what are the next steps ?
I am currently installing GridControl on a seperate host with the option: Enterprise Manager10g Grid Control Using an Existing Database
The installation is still running....
What are the steps ? Any documentation ? Any tutorials ?
Do I need to install agents on each client in the cluster ?
What about the name resolution ?
Any listener configuration necessary ?
Is the configuration done via data guard command line ?
Christian

Bear in mind that the standby creation wizard in Grid Control will only create a non-RAC standby. Once you get to Grid Control 10.2.0.5 and your databases are in 11g you will be able to use the Grid Control convert to RAC wizard on your standby. Prior to that you will have to convert the standby to RAC manually or follow the above mentioned paper and create the standby by hand and then import it into Grid Control.
Larry

Init SID .ora during configuration of Data Guard - advice required

Hi All,
I am looking to implement data guard across 2 RAC clusters. One cluster will be primary and the other is for Disaster Recovery.
I have already set up the two 11g R 2 RAC clusters on RHEL 5 and now need some pointers to good docs for data guard install.
Can some one direct me to good step by step info for configuring data guard between to RAC clusters - detailed explanations of each step would be useful too, in particular around the init.ora file configuration changes between the primary and DR sites
Much appreciated
Steve

Hi Steve,
look at the MAA Whitepapers:
http://www.oracle.com/technetwork/database/features/availability/oracle-database-maa-best-practices-155386.html
There are very good ressources in setting up RAC DG environments like:
Data Guard 11g Installation and Configuration Best Practices on Oracle RAC
Rapid Oracle RAC Standby Deployment: Oracle Database 11g Release 2
Setup Guide: Creating a RAC Logical Standby Database for a RAC Primary Database
Client Failover in Data Guard Configurations for Highly Available Oracle Databases
a.s.o.
Sebastian

Problem with data guard Creating a Physical Standby Database turorial

There is a tutorial of Creating a data guard Physical Standby Database:
http://www.oracle.com/technology/obe/11gr1_db/ha/dataguard/physstby/physstdby.htm
I tried to install it on two servers. One for primary database second for physical standby.
I have error on C. Creating the standby database over the network, action #6:
"On the standby system, set the ORACLE_SID environment variable to your <physical standby SID> (i.e. orclsby1) and start the instance in NOMOUNT mode with the text initialization parameter file."
When I try to connect to idle instance there is an error pops up:
C:\>sqlplus / as sysdba
SQL*Plus: Release 11.1.0.7.0 - Production on Thu May 21 16:28:10 2009
Copyright (c) 1982, 2008, Oracle. All rights reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
I'v checked listener and it is runned. There is no service for database because there is no database yet.
The question is did some one installed data guard configuration using this tutorial? Is there any errors in it? What should I do to finish this installation?

On Windhose for every instance a service must have been created using the oradim command.
Oracle tutorials are usually Unix-centric, as Windhose is an odd man out, so they don't discuss that bit.
'Kindly do the needful' and create the service prior to starting the instance in nomount mode
Hint: oradim is documented and has a help=y clause.
IIRC there is an option in database control (in the maintenance part) which automates everything.
Sybrand Bakker
Senior Oracle DBA
Experts: those who do read documentation

Switchover in a data guard environment using Grid Control 10.2.0.3

I've tested switchover in a data guard environment using Data Guard Broker in Grid Control.
However, at times, i receive the message "RemoteOperationException: failed to establish input streaming thread". It looks like it has problems connecting to the remote node using the host credentials supplied. I know the credentials are ok because this worked before. If i test preferred credentials, it's ok too..
The workaround has been to restart the database and this seems to work.
Has anyone experienced this?

Thanks for All for replying.
*1. How can I upgrade my Grid control 10.2.0.3 to 10.2.0.4?*
I have upgraded the Grid Control Agent and OMS from 10.2.0.3 to 10.2.0.4
When we upgrade the OMS which also upgrade the Repository database.
Apply the patchset p3731593_10204_Linux-x86-64.zip (Which comes with Grid_Control_10.2.0.4.0_Linux-x86-64.zip)
su - oracle
cd 3731593/Disk1
./runInstaller (Run two times for Agent and oms upgrade)
Agent upgrade_
During upgrade
Specify Home Details: Select the Agent Home to upgrade Grid Control Agent.
Ex: /u01/app/oracle/OracleHomes/agent10g
OMS upgrade+
Specify Home Details: Select the oms home to upgrade oms
Ex: /u01/app/oracle/OracleHomes/oms10g
*2. How can I monitor/Connect my Existing database 10.2.0.4 from Grid Control 10.2.0.3?*
Install Grid Agent on the existing database server 10.2.0.4
Download Linux_x86_64_Grid_Control_agent_download_10_2_0_4_0.zip from OTN http://www.oracle.com/technology/software/products/oem/htdocs/agentsoft.html
su - oracle
cd /u01/software/GridAgent/linux_x64/agent
./runInstaller
Refer:
[To Install an Additional Management Agent Using OUI|http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/installing_em.htm#sthref318]
OracleÂ® Enterprise Manager Grid Control Installation and Basic Configuration
10g Release 4 (10.2.0.4)
Part Number E10953-05
3 Installing Enterprise Manager
Thanks
Mukarram Khan
Edited by: Mukarram Khan on Feb 6, 2009 11:04 PM

11.2 DB & Data Guard : ORA-16014 how to archive a sequence?

Hi,
I've installed 11.2 Oracle Database in my laptop with Oracle Enterprise Linux 5.3 and I have created two standby databases, orcl (primary) and orclstby (physical standby). I performed a switchover to orclstby and consequently, orclstby was the new primary and orcl the physical standby, I checked those values with SQLPlus executing the select database_role from v$database statement, so, there were no problems during the switchover.I also shutteddown and started both primary and stanby databases to check all was fine.
Today, I've tried to start the environment again and I've encountered the following problem during the startup of the primary database:
[oracle@mredon-es ~]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Wed Oct 21 17:34:21 2009
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 839282688 bytes
Fixed Size 2217992 bytes
Variable Size 507512824 bytes
Database Buffers 322961408 bytes
Redo Buffers 6590464 bytes
Database mounted.
ORA-03113: end-of-file on communication channel
Process ID: 5562
Session ID: 9 Serial number: 3
I've checked the newest log created and this is its content:
Dump file /u01/app/oracle/product/11.2.0/dbhome_1/rdbms/log/orclstby_ora_5382.trc
*** 2009-10-21 17:34:30.467
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1
System name: Linux
Node name: mredon-es.us.oracle.com
Release: 2.6.18-128.el5
Version: #1 SMP Wed Jan 21 08:45:05 EST 2009
Machine: x86_64
Instance name: orclstby
Redo thread mounted by this instance: 0 <none>
Oracle process number: 0
Unix process pid: 5382, image: [email protected]
*** 2009-10-21 17:34:30.526
2009-10-21 17:34:30.457: [ default]utgdv:2:ocr loc file /etc/oracle/olr.loc cann
ot be opened. errno 2
2009-10-21 17:34:30.527: [ default]utgdv:2:ocr loc file /etc/oracle/ocr.loc cann
ot be opened. errno 2
I've searched in Metalink information about ocr.loc and olr.loc and they seem to be part of an Oracle RAC installation, I don't know why the database needs these files to start if I am using single instance...
Any idea would be kindly appreciated because I'm a bit confused and I don't really know what steps I am suppposed to take in order to solve this problem.
Thanks in advance.
Edited by: mredon on Oct 26, 2009 5:22 AM
Reason: title of the post changed

sorry for the delay, here is the alert log:
<msg time='2009-10-21T23:03:09.576+02:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='mredon-es.us.oracle.com' host_addr='192.168.237.130' module='[email protected] (TNS V1-V3)'
pid='6582'>
<txt>Data Guard: version check completed
</txt>
</msg>
<msg time='2009-10-21T23:03:09.642+02:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='mredon-es.us.oracle.com' host_addr='192.168.237.130' module=''
pid='6486'>
<txt>LGWR: STARTING ARCH PROCESSES
</txt>
</msg>
<msg time='2009-10-21T23:03:09.709+02:00' org_id='oracle' comp_id='rdbms'
msg_id='ksbrdp:3833:3697353022' type='NOTIFICATION' group='process start'
level='16' host_id='mredon-es.us.oracle.com' host_addr='192.168.237.130'
pid='6588'>
<txt>RSM0 started with pid=23, OS id=6588
</txt>
</msg>
<msg time='2009-10-21T23:03:09.831+02:00' org_id='oracle' comp_id='rdbms'
msg_id='ksbrdp:3833:3697353022' type='NOTIFICATION' group='process start'
level='16' host_id='mredon-es.us.oracle.com' host_addr='192.168.237.130'
pid='6590'>
<txt>ARC0 started with pid=24, OS id=6590
</txt>
</msg>
<msg time='2009-10-21T23:03:10.832+02:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='mredon-es.us.oracle.com' host_addr='192.168.237.130' module=''
pid='6486'>
<txt>ARC0: Archival started
</txt>
</msg>
<msg time='2009-10-21T23:03:10.832+02:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='mredon-es.us.oracle.com' host_addr='192.168.237.130' module=''
pid='6486'>
<txt>LGWR: STARTING ARCH PROCESSES COMPLETE
</txt>
</msg>
<msg time='2009-10-21T23:03:10.833+02:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='mredon-es.us.oracle.com' host_addr='192.168.237.130' module=''
pid='6590'>
<txt>ARC0: STARTING ARCH PROCESSES
</txt>
</msg>
<msg time='2009-10-21T23:03:11.180+02:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='mredon-es.us.oracle.com' host_addr='192.168.237.130' module='[email protected] (TNS V1-V3)'
pid='6582'>
<txt>ARCH: LGWR is scheduled to archive destination LOG_ARCHIVE_DEST_2 after log switch
</txt>
</msg>
<msg time='2009-10-21T23:03:11.183+02:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='mredon-es.us.oracle.com' host_addr='192.168.237.130' module='[email protected] (TNS V1-V3)'
pid='6582'>
<txt>ARCH: LGWR is scheduled to archive destination LOG_ARCHIVE_DEST_1 after log switch
</txt>
</msg>
<msg time='2009-10-21T23:03:11.258+02:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='mredon-es.us.oracle.com' host_addr='192.168.237.130' module='[email protected] (TNS V1-V3)'
pid='6582'>
<txt>Errors in file /u01/app/oracle/product/diag/rdbms/orclstby/orclstby/trace/orclstby_ora_6582.trc:
ORA-16014: log 1 sequence# 27 not archived, no available destinationsORA-00312: online log 1 thread 1: '/u01/app/oracle/product/oradata/orclstby/redo01.log'
</txt>
</msg>
<msg time='2009-10-21T23:03:11.263+02:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='mredon-es.us.oracle.com' host_addr='192.168.237.130' module='[email protected] (TNS V1-V3)'
pid='6582'>
<txt>USER (ospid: 6582): terminating the instance due to error 16014 </txt>
</msg>
<msg time='2009-10-21T23:03:11.429+02:00' org_id='oracle' comp_id='rdbms'
msg_id='ksbrdp:3833:3697353022' type='NOTIFICATION' group='process start'
level='16' host_id='mredon-es.us.oracle.com' host_addr='192.168.237.130'
pid='6592'>
<txt>ARC1 started with pid=25, OS id=6592
</txt>
</msg>
<msg time='2009-10-21T23:03:12.728+02:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='mredon-es.us.oracle.com' host_addr='192.168.237.130' module='[email protected] (TNS V1-V3)'
pid='6582'>
<txt>Instance terminated by USER, pid = 6582
</txt>
</msg>
I've marked in bold the errors which may be causing the problem, ¿what do you think?

Active Data guard with R12.1.X

Hi
One of our customers wants to configure their EBS R12 Instance with Active Data guard
Current Architecture:
R12.0.6 with RDBMS 10.2.0.4
Projected Architecture:
R12.1.3 with 11.2.0.3 RDBMS with Active Data guard.
I have checked the MOS ID :
Using Active Data Guard Reporting with Oracle E-Business Suite Release 12.1 and Oracle Database 11g [ID 1070491.1]
Please share your ideas and doc id's to do this activity successfully.
Please share the docs to upgrade R12.0.6 to R12.1.1
Thanks
Shaik

One of our customers wants to configure their EBS R12 Instance with Active Data guard
Current Architecture:
R12.0.6 with RDBMS 10.2.0.4
Projected Architecture:
R12.1.3 with 11.2.0.3 RDBMS with Active Data guard.
I have checked the MOS ID :
Using Active Data Guard Reporting with Oracle E-Business Suite Release 12.1 and Oracle Database 11g [ID 1070491.1]
Please share your ideas and doc id's to do this activity successfully.The document you posted covers every thing in detail.
In details you can check
http://appsdbastuff.blogspot.com/2009/07/configuring-standby-databasedataguard.html
Disaster recovery for R12.1.1
Please share the docs to upgrade R12.0.6 to R12.1.1Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86 [ID 761564.1]
Oracle E-Business Suite Release 12.1.1 Maintenance Pack Installation Instructions [ID 752619.1]
Upgrade 12.0.6 To 12.1.1 Failed On Frmxml.odf with Duplicate Keys [ID 1094034.1]
Thanks

Install Guide of Active Data Guard for 11g R2 on Linux

Friends,
Searched for this on tahiti.oracle.com which redirects you to the oracle's docs.
Anyone knowing where to find installation guide for active data guard of 11g R2 on linux?
Thanks much.

This article looks useful
http://dbastreet.com/blog/?p=16
Also you may want to check Larry's book on 11g Data Guard. It has a complete chapter on Active Data Guard.
http://bit.ly/cGcgEw

Configure about the DATA GUARD APPLICATION on ORACLE 9i platform

I have worked on Oracle 9i (9.2.0.1) platform. I have installed Oracle 9i server edition in my machine, and created one database name ORCL.
I want to configure DATA GUARD APPLICATION in my machine... is it possible?
if it is then how can I do this...

Yes, it is possible.
Please refer to the Dataguard Concepts and Administration Manual for installation guidance.
Please do not bother to come back to ask further doc questions, showing you are not prepared to do your own work.
Sybrand Bakker
Senior Oracle DBA

10g Data Guard Install Questions... Solaris 9

Firstly, I've done several Failsafe installes on Wintel platforms, but I'm having a tough time getting started installing Dataguard on Solaris. According to the manual:
Oracle® Data Guard Broker
10g Release 1 (10.1)
Part Number B10822-01
"The Oracle Data Guard graphical user interface (GUI), which you can use to manage broker configurations, is installed with the Oracle Enterprise Manager software."
I don't see any link or otherwise access to Data Guard via the 10g Enterprise Manager. Is there something that I missed during install that will allow me access Data Guard GUI?
I'm stuck
http://download-east.oracle.com/docs/cd/B14117_01/server.101/b10822/concepts.htm#sthref14

rajeysh wrote:
refer the link:- hope this will help you.
http://blogs.oracle.com/AlejandroVargas/gems/DataGuardBrokerandobserverst.pdf
http://oracleinstance.blogspot.com/2010/01/configuration-of-10g-data-guard-broker.html
http://gjilevski.wordpress.com/2010/03/06/configuring-10g-data-guard-broker-and-observer-for-failover-and-switchover/
Good luck.
SQL> show parameter broker
NAME                                 TYPE        VALUE
dg_broker_config_file1               string      /u03/KMC/db/tech_st/10.2.0/dbs
                                                 /dr1KMC_PROD.dat
dg_broker_config_file2               string      /u03/KMC/db/tech_st/10.2.0/dbs
                                                 /dr2KMC_PROD.dat
dg_broker_start                      boolean     FALSE
SQL>so i need only:
ALTER SYSTEM SET DG_BROKER_START=true scope=both;only to act in dgmgrl.
please confirm me ......

Data Guard Installation

Similar Messages

Maybe you are looking for